Develop Bugs

[Final] WM6.1 BENCHMARKS! READ FIRST! + performance XML

Hermes WM Roms Benchmarks​
My Hermes is dead.. this isnt going to get updated again, im so sorry​
One of the MOST common questions we get, is, what's the lites rom? And what's the fastest rom?
How to make your rom faster
​A new program called WMRegOptimizer, which you can get here, has had noticed improvements on the speed of my phone and others.
For more detailed info and a few helpfull recommendations.
My Methods:
​I take the rom, fresh from the chef, and flash it, that's it, no UC, no changes, nothing!
I run the tests unplugged, and before connecting to activesync.
All i install is my battery drain tool, and my benchmarking tool.
I dont change the Pagepool, or the cache settings, for the main benchmarks.
Below there will also be benchmarks of the rom i use, and other members of XDA, post yours up as well!
Also, attached you will find a XML you can import with Advanced config, or use in your UC, this is cache tweaks, and i will post benchmarks to show how they help.
I know that My benchmark suit isnt the best around, i chucked it together in 5min, but, as im using the same on all roms you can compare without worrying to much!
If there was any "odd" readings, aka something much higher/lower, I re benchmarked, re flashed, until I was sure its not an error I can do anything about.
About each section :​
Rom name: name of the rom
Rom build: The build of the rom
idle power consumption (mA): This is the power it was draining in mA (milliamp) sitting in the power consumption tool with the backlight (at rom default), the device was not allowed to turn off ect. And i left it for 2-5min to average.
Integer: How quickly the phone performed Integer calucations, see here for more info
floating point: How quickly the phone performed floating point calucations, see here for more info
RAM Access: How quickly the phone could access the RAM
Draw Bitmaps: How quickly the phone could redraw bitmaps on the screen (graphical performance)
Main Storage read/write: How quickly the phone could read/write to the main storage.
Higher is better apart from for idle power consumption, where lower is better.
Power consumption is VERY MUCH affected by screen brightness, I should have standardised this.. but it still give an idea..
My conclusions​
RBS roms are faster than Non BS
Compressed roms are slower and use more power in idle for the most part
Some roms are faster but use more idle power, and different roms have there strengths and weaknesses!
.zip has all the benchmarks so far, along with graphs.
Pagepoll tests​
I decided to take 3 roms and test 6v8meg PP, the results are in the .zip
For the most part, the 8meg PP roms where faster, but has less ram (duh). I would do more tests, but it would take far to much time..
Graphs​
These are out of date compared to the .zip, I will update them asap.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There ALL in the .zip, they would take up to much room to post here.
Performance XML​
This file can be run with UC, or imported with advanced config.
What this does is fine tune the cache sizes to what I think gives the best performance.
Updated on 25th August
Added Power management tweaks to the XML
Updated the Cache settings.
Added tweak to remove the delay when taking pictures.
Examples:
CRCv12.9 BS naked 8meg PP pre XML benchmarks. (See that the higher pp is faster than the 6meg one in the main benchmark tests)
Integer: 181.9167
Floating Point: 5.779
Draw Bitmaps: 710
RAM Access: 1620
Main storage (write): 710.62
Main Storage (read): 3690.09
CRCv12.9 BS naked 8meg PP post XML benchmarks.
Integer:184.3587
Floating Point: 5.783
RAM Access1632
Draw Bitmaps: 726
Main storage (write)710.37
Main Storage (read)3685.66
Performance settings if you dont want to use the XML:
File system cache: Enabled
File system cache size: 2megs
File system filter cache: 8192 sectors
Glyph Cache: 128KB
What to benchmark your own rom? See this post for the program I use!​
Notes: None of the tweaks in the XML is my work, apart from making it and posting it here, im just trying to make it easier for the newbies to get the most from there device!
WM 6 roms​
This thread here by KarhU has benchmarks for most WM6 roms
Todo:
*Add links to rom thread in the spreadsheet.
*Work out why there is the MASSIVE increase in main memory speed on CRCv12.7 and roms based on it. (seems to be some due to some tweaks in the rom!)
If this has helped you, or you like what I do, maybe consider a small donation, anything is very gratefully received!

I'm shaking
In my chair, waiting for the results, ..... half an hour too long, get your a into g

zocster said:
In my chair, waiting for the results, ..... half an hour too long, get your a into g
Click to expand...
Click to collapse
It takes 10min per rom And i keep having to text/call mid power usage test ;/

Bravo
Awesome work, ...

Excellent job, thanks a lot !!

That all the current roms done, Ill try to make it easer for you to see what everything means tomorrow, right now I need to get working, get my Hermes back to how I like it, and do some work
Any feedback? Any roms you want me to do? any graphs? Just say!

Impressive..simply impressive..

blackout128 said:
Impressive..simply impressive..
Click to expand...
Click to collapse
Thanks you!
Now, to get the ball rolling, lets see your benchmarks!
Heres mine: CRCV12.9BC-naked 8meg PP
Integer: 181.1740
Floating point: 5.773
Ram Access: 1637
Draw bitmap: 721
Main Storage (write): 708.24
Main Storage (read): 3683.45

veyka said:
Thanks you!
Now, to get the ball rolling, lets see your benchmarks!
Heres mine: CRCV12.9BC-naked 8meg PP
Integer: 181.1740
Floating point: 5.773
Ram Access: 1637
Draw bitmap: 721
Main Storage (write): 708.24
Main Storage (read): 3683.45
Click to expand...
Click to collapse
Mine fully loaded, with MSN pushing mail, and activesync on 2003 OWA sync.
integer: 178.6745
floating pt: 5.751
RAM Access: 1600
Draw bitmaps: 565
Main Storage Write: 614.46
Main Storage Read 3723.64

Heres mine: PDACorner NRBSN V20 8 Meg PP
Integer: 176.8177
Floating point: 5.746
Ram Access:1626
Draw bitmap: 716
Main Storage (write):631.45
Main Storage (read): 3453.63

@ veyka!
idle power consumption higher is better or lower is better ?

dvha79_ddt said:
Dear peyka!
idle power consumption higher is better or lower is better ?
Click to expand...
Click to collapse
Lower is better! Wooops! Ill correct that in my first post. Thanks

veyka said:
Lower is better! Wooops! Ill correct that in my first post. Thanks
Click to expand...
Click to collapse
Thank you for your fast reply, This topic is real mean.
Good luck!

dvha79_ddt said:
Thank you for your fast reply, This topic is real mean.
Good luck!
Click to expand...
Click to collapse
Thanks again! Im just benchmarking another 4roms! update asap.

5 roms added! New better graphs planned for later today!

Awesome work!
Keep it up!

Any Schap's 4.40 Beta benchmark??
Nico

thank, man - you do a nice work

Thanks man very useful, I'm still on WinMo6.0 deciding where to go.

colombia7 said:
Any Schap's 4.40 Beta benchmark??
Nico
Click to expand...
Click to collapse
I can do! Ill look into getting a non locked copy!
And thanks everyone
I ran out of steam last night But ill finish off the updates for today.

Update! nueDynamicClock v1.3 - Tool to change Clockspeed of your Blackstone

A friend founds this at pocketnow.com.
nueDynamicClock allows you to change the clock speed of your Touch Pro, Touch Diamond or Touch HD based on certain parameters.
Update: nueDynamicClock v1.3 has been released
Changes: Display issue fixed, fixed slow clock change, stability fixes, ensure all threads running in Kernel mode, set profile on save, WM6.5 hi-res icon
Here is the link:
http://www.nuerom.com/BlogEngine/page/nueDynamicClock.aspx
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Does this work??

how safe i to use that

Awesome. Need to be careful though.

Anyone tested?? we may have something big here!!! (if its working..!!)
Max values..?? Performance improvements?? Some benchmarks?
Because after some research i did , i saw that our processor is capable even for speeds almost double its original value!! (some say 850 and report fast and stable!!)
Lets see!!

What the hell?
800MHZ on the HD?
thats crazy!

Yeah it works
you need to install the cab and soft reset
after in All settings > System
a new icon appear : processor
set it there .
you can't overclock speed actually with this tool
but, you can slow down a lot the cpu to save a lot's of battery during idle process.

Does anyone know what these value are by default? We could actually make battery life worse if we set higher values for backlight off, etc than the factory settings...

It is not working. I try it again and again.
Set all values to 256.00 and it loose this settings after exit or if the device go to sleep.
Under "Current processor speed:" it shows 256.00 and if I go again to this setting it shows the "normal" 528mhz.

geistteufel said:
Yeah it works
you need to install the cab and soft reset
after in All settings > System
a new icon appear : processor
set it there .
you can't overclock speed actually with this tool
but, you can slow down a lot the cpu to save a lot's of battery during idle process.
Click to expand...
Click to collapse
Don't tell me the Touch HD actually doesn't manage it's CPU speed on its own!?!? Even my old Axim x51v did that!!!

there is another thread
http://forum.xda-developers.com/showthread.php?t=507212

I ' have try this :
Default :528mhz
After 5s 256mhz (this doesn't work I think, but not sure)
When backlight off : 82mhz
When suspend : 19mhz
So after all night of sleeping, my battery haven't lose any bare.
I will test it more, I think they greatly improve battery life.
so just keep testing.

MAMeingast said:
Don't tell me the Touch HD actually doesn't manage it's CPU speed on its own!?!? Even my old Axim x51v did that!!!
Click to expand...
Click to collapse
Qualcomm is not Intel-Marvel !

I tested the tool from April 21th to April 25th. 5 days without recharge!
Otherwise i was charging my Blackstone every two days and i've running ICQ in backround around the clock. So i'm online once i turn on my telephone. It works perfect for me!
Setup:
idle after 5000ms: 384 MHz
on backlight of: 122.88 MHz
on suspend: 122.88 MHz
Sorry for my bad english

hi, first of all, thank yu for sharing.
second: Ihave put the exe file on my HD and run it from my phone but it keeps saying:
"your phone is preventing installation, we can try to automatically fix this, but we need to restart your device. continue?"
and when I cic yes, it restarts and nothing happens. so I run the programm again, and get the same message.
anyone have any idea wha the problem might be?
thank you in advance

Installed v1.2 and changed profile to "Power saving", but the cpu clock is still at 528MHz?

For me resulted in more battery drain (version 1. BTW 1.2 doesn't work)
See here: http://forum.xda-developers.com/showpost.php?p=3692764&postcount=77

@jouh:
Click on "File" -> "Reset Active Profile". The value of "Active Profile" should change from "Default" to yours and you can see the de-/increasing CPU speed now.

kostasalfa said:
Anyone tested?? we may have something big here!!! (if its working..!!)
Max values..?? Performance improvements?? Some benchmarks?
Because after some research i did , i saw that our processor is capable even for speeds almost double its original value!! (some say 850 and report fast and stable!!)
Lets see!!
Click to expand...
Click to collapse
Can you tell us, where did you read about this overclocking to 850 MHz. I would like to learn more about it. Like others say, this program cannot overclock but only underclock.Please give us some links. Thanks

Version 1.2 results excessive battery drain to me too (8-12% per hour, in suspend mode).
Back to version 1...

[App] Overclocking CPU Speed to 624Mhz

Hi,
Many threads in forum talking about overclocking, but here i found a simple and little application that let u set cpu speed to 624Mhz.
No installation required. Put the app in your device and choose your speed.

Can you share some of your experience to this application?
I installed and feel as same as before nothing different!

how do you "choose" the speed? I have no idea how to do that.I've installed and nothing else.

I just found this app in another forum.
Put in your \Windows folder and create a shortcut in Start Menu.
U have only 2 speeds: 520Mhz and 624Mhz.
Choose one.

pekas said:
I just found this app in another forum.
Put in your \Windows folder and create a shortcut in Start Menu.
U have only 2 speeds: 520Mhz and 624Mhz.
Choose one.
Click to expand...
Click to collapse
since you´re using it what do you personaly think? is it stable/safe?

Just tried it, and i dont see a difference. out of curiosity, what forum did you find this in?

It's safe. And personnaly i don't see much difference too, but there is no other app to overcloking our devices for now.
I saw in PPCGeeks forum.

you ppl now overclocking is that the cpu gets more powe/ energy/ voltage.
it can do serous damage to youre mobile

pekas said:
I just found this app in another forum.
Put in your \Windows folder and create a shortcut in Start Menu.
U have only 2 speeds: 520Mhz and 624Mhz.
Choose one.
Click to expand...
Click to collapse
But CPU of Blackstone is 528 MHz, not 520 MHz. These speeds (520 and 624) are speed steps of Marwell CPUs. Then I think this application is not for Blackstone.

pekas said:
Hi,
Many threads in forum talking about overclocking, but here i found a simple and little application that let u set cpu speed to 624Mhz.
No installation required. Put the app in your device and choose your speed.
Click to expand...
Click to collapse
Can you say from where exactly you get this? i mean the Thread from PPCgeeks because there have diferent overclock apps for diferent devices.. also some of them are old i mean the cab is made 2008 year and they don`t work or can damage your device now you post this in the Blackstone thread and i think then you need ot be sure its for Blackstone and our processor so please post the original link to read more about this.
The other point is that you and the other peoples who try it say thay they dont see any diference believe me with 624Mhz will have diference for naked eye in the performance of the Blackstone so this maybe mean that the app just not working for us...
Anyway will wait for the link to read more.

I have tested for 1 day, my device lock up 5 times and lastly I did a hard rest to clean this application away.
Anyone happened just same with me?

dioooi said:
I have tested for 1 day, my device lock up 5 times and lastly I did a hard rest to clean this application away.
Anyone happened just same with me?
Click to expand...
Click to collapse
I don't know what happened, but i have no problem at all.
Here's the original link:
http://forum.ppcgeeks.com/showthread.php?t=56738

Someone who already use it need to do a Bench with result because now all the peoples say diferent things and we need to know do this really work or is placibo effect with a Bench and Test Result all will be clear

This tool is wonderfull! Games run so much smoother now! Truly amazing man.

TP-Power said:
This tool is wonderfull! Games run so much smoother now! Truly amazing man.
Click to expand...
Click to collapse
Someone who don`t install this already need to install 1st GLBenchmark 1.1.0 in the phone memory then soft reset and imideately to Bench the device after this to save the results to install the Overclock tool to make it to 624Mhz again Soft Reset and imideately after this to RUN again the Bench and save result and then we can see do have some diference from the 2 Bench results.

TP-Power said:
This tool is wonderfull! Games run so much smoother now! Truly amazing man.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sad truth: that is not funny. This app has been already busted here: http://forum.xda-developers.com/showthread.php?t=507798
I've tested it by SPB Benchmark- there were no differences between "before" and "after"

Are you kidding me? That would be absolutely awsome! An application like that would perfectly fit my needs.

not working!

Eing????
OC on a PC means go into the Bios. Who, what, when and how goes into the bios of a blackstone????

I have used this in my TP2, cant really say there is a notable difference. Ofcourse there are some lockups associated with it as well. Not worth it in my books.
This will not kill your device. Just a Hard Reset at the most.

[Q] Why is the newest Netarchy Kernel making my Stock Root Rom's FPS WORSE?!

Can anyone help me out?
I'm running stock rooted 2.2 (deodexed) and flahsed over the 4.0 zip... and the scrolling is choppier than all hell. I re flashed the stock kernel, and it was back to being fine again. So, I tried again, with wiping the caches first, and still choppier than all get out when I flashed the kernel.
It's definitely the right kernel, but what the hell am I doing wrong here? Any help would be appreciated.

And, I'll even throw in 5-10 dollrs for someone who can give me an answer that works.

This could be because of the new settings he just changed. Try the download that is 4.0.2 and not 4.0.3, or try overclocking your processor to 1.2GHZ with OC widget or SetCPU.

What kind of screen do you have? If you have a Nova panel, you may need to adjust T2 values to get the best performance. Just my 2 cents.

Ok, so I installed 4.0.2, and it seems to be running better, but still some choppiness on the menu up and down scrolling when "all apps" is opened.
I have no idea how to use SetCPU (noob yep... graphics guy... not a tech guy_, so I took a screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wpould you mind just telling me where the sliders should be?

nukedukem said:
What kind of screen do you have? If you have a Nova panel, you may need to adjust T2 values to get the best performance. Just my 2 cents.
Click to expand...
Click to collapse
I have a Nova, but, I have no idea what T2 panels are and how to adjust them. If you could point me to the right app or direction, that'd be awesome. I'll donate to you as well if it helps.

There's an app floating around here called NovaFreq formerly evoswitch. It allows you to change the panel frequency to improve fps. Everyone gets different results. 450ish was usually the best for me. Basically trial and error. Most haven't needed it with recent kernels though. As for setcpu, the higher the max frequency the better fps performance, but overclocking comes with some risks. Im usually underclocked at 576max / 245min. You can also set profiles to run certain speeds when screen off, charging, etc. Helps a lot with battery life. I would move your max down to 998 or 1113 and min to 245. Ondemand is usually a good scaling setting. Hope this helps.
Sent from my FROYO'D EVO using xda app

dglowe343 said:
There's an app floating around here called NovaFreq formerly evoswitch. It allows you to change the panel frequency to improve fps. Everyone gets different results. 450ish was usually the best for me. Basically trial and error. Most haven't needed it with recent kernels though. As for setcpu, the higher the max frequency the better fps performance, but overclocking comes with some risks. Im usually underclocked at 576max / 245min. You can also set profiles to run certain speeds when screen off, charging, etc. Helps a lot with battery life. I would move your max down to 998 or 1113 and min to 245. Ondemand is usually a good scaling setting. Hope this helps.
Sent from my FROYO'D EVO using xda app
Click to expand...
Click to collapse
Wow thanks. I downloaded nova frequency, but just left it at default, and changed the setcpu, bc I was getting random reboots with the overclock. I also set profiles to way lower when the screen is off and the phone is at lower battery percents.
This phone officially runs like it's on crack now. Good stuff.
Guys, PM me ur paypals, and I dont' mind donating a few bucks tomorrow.

Glad to help. Feel free to send my donation to one of the developers on this forum. Without them I wouldn't have known any of that.
Sent from my FROYO'D EVO using xda app

dglowe343 said:
Glad to help. Feel free to send my donation to one of the developers on this forum. Without them I wouldn't have known any of that.
Sent from my FROYO'D EVO using xda app
Click to expand...
Click to collapse
Good ****
Sent from my PC36100 using XDA App

TJDuckett said:
Wow thanks. I downloaded nova frequency, but just left it at default, and changed the setcpu, bc I was getting random reboots with the overclock. I also set profiles to way lower when the screen is off and the phone is at lower battery percents.
This phone officially runs like it's on crack now. Good stuff.
Guys, PM me ur paypals, and I dont' mind donating a few bucks tomorrow.
Click to expand...
Click to collapse
LOL bro. Not only did I tell you to use NovaFreq, but I also told you not to use SetCPU. You were getting reboots b/c it was set too high and you don't want to set it below 245 when screen is off. I don't think SetCPU is so great for *most* people. I could have helped you on GTalk and taken your money...gladly would have

[Q] Best optimizations for 3D gaming

Right now I'm running FXP054 with the kernel OC'd to 1.4GHz. I also have cut down on a lot of running services in the background through the Autostarts app [ https://market.android.com/details?id=com.elsdoerfer.android.autostarts ].
What would be the best governor, I/O scheduler, & OC for the CM7.2.0 CDMA kernel?
What build.prop settings should I apply to get the most out of 3D gaming?
Any other options/settings/apps that I should be aware of for better gaming performance in general on my Xperia Play?
I'd greatly appreciate any insight. Thanks.

Download the Ram Manager pro app from the market. Use the default balance option when not gaming and use the hard gaming option when gaming.
I've tried all tweaks and zips and governors and everything possible. This application has made the biggest difference so far. Especially the lock home launcher option.

How much of a difference between that & the v6 Supercharged script in terms of performance?

CrimsonSentinel13 said:
How much of a difference between that & the v6 Supercharged script in terms of performance?
Click to expand...
Click to collapse
Night and day. It's very difficult to give empirical evidence, so metaphors are about the best you'll get from me
V6 supercharger had zero to little effect overall. It did lock the launcher SOMETIMES, but other than that had very little effect on performance.
Ram manager pro is giving me a lot of performance and the different profiles are very clear and understandable. Unlike the vague and ambiguous settings on the supercharger.

I'll have to try that app out. How well does it do with Gameloft games? I tried Asphalt 6 last night & it ran well for a while until it decided to slow to a crawl on screen. I'm aiming to get a consistent gaming experience regardless of 2D or 3D.

3dawg said:
Download the Ram Manager pro app from the market. Use the default balance option when not gaming and use the hard gaming option when gaming.
I've tried all tweaks and zips and governors and everything possible. This application has made the biggest difference so far. Especially the lock home launcher option.
Click to expand...
Click to collapse
That app actually doess nothing at all for the launcher.
Its the grouping shift without changing a single priority.
Its all about aggressive task killing without user input and that's it.
Use Update 9 RC4 as it has more options for high ram devices and makes recommendations based on ram.
Sounds like you used Update 8.

zeppelinrox said:
That app actually doess nothing at all for the launcher.
Its the grouping shift without changing a single priority.
Its all about aggressive task killing without user input and that's it.
Use Update 9 RC4 as it has more options for high ram devices and makes recommendations based on ram.
Sounds like you used Update 8.
Click to expand...
Click to collapse
Thanks for the insight.

You're welcome
I really dislike it that people are being mislead into believing that it actually does something for the launcher.

zeppelinrox said:
You're welcome
I really dislike it that people are being mislead into believing that it actually does something for the launcher.
Click to expand...
Click to collapse
I did indeed use update 8. I will give the latest a try.
You say it does nothing for the launcher but I'm seeing some fantastic results i.e the launcher literally never dies.
It had to redraw once after playing modern combat 3, and the whole phone slowed to a crawl unexpectedly for 10 seconds and then back to normal. Other than that the application has been great.
Using the script, the launcher died regardless of which setting I chose even when it said I had a "hard to kill" launcher or whatever. It would work for a while but redraws were too common. Also, all tutorials seemed based around motorola phones so I had difficulty finding what options would suit mine the best.
Regardless, I'm grateful for fantastic devs like you, and this script is undeniably innovative. Expect a donation at the end of the month
EDIT:
IGNORE EVERYTHING I SAID EARLIER, HOLY CRAP UPDATE 9 RC4 IS DAMN GOOD.
Seriously, I uninstalled Ram Manager pro, it's totally unnecessary.
Supercharger update 9 RC4 using option 6 has been flawless for me.

ah yes U9 is much improved.
If you can spare the ram, just bulletproof the sucker

zeppelinrox said:
ah yes U9 is much improved.
If you can spare the ram, just bulletproof the sucker
Click to expand...
Click to collapse
What apps should be bullet-proofed? I'm using script for the purpose of getting better gaming performance.

I just uploaded an RC5 test so try that
I meant the launcher... so if you eve get any redraw, pick bulletproof launcher so it can't be killed but then again if you don't have enough ram to load big games then the default die hard launcher is good enough... it should still almost never happen.

zeppelinrox said:
I just uploaded an RC5 test so try that
I meant the launcher... so if you eve get any redraw, pick bulletproof launcher so it can't be killed but then again if you don't have enough ram to load big games then the default die hard launcher is good enough... it should still almost never happen.
Click to expand...
Click to collapse
Where do you have the RC5 sh located at? I checked your beta page for it & don't see it.

Ah.. it's on the last page of the thread... I plan on having a newer one up soon so I uploaded it for a little bit of testing but it's really solid as is

zeppelinrox said:
Ah.. it's on the last page of the thread... I plan on having a newer one up soon so I uploaded it for a little bit of testing but it's really solid as is
Click to expand...
Click to collapse
I started using RC5-test last night. It works really well. I noticed that it now has the Cust-OOM calc settings, which I'll apply tonight & see how it runs.
I really like how well done it is. I'll have to test out a few games this week.

Thamks
If you go to custOOMizer it will ask if you want to load the calculated values so that you only have to say yes or no lol

zeppelinrox said:
Thamks
If you go to custOOMizer it will ask if you want to load the calculated values so that you only have to say yes or no lol
Click to expand...
Click to collapse
Even easier, I was thinking I would have to record the values & make sure I got it right.

Hi Zeppelin!
I would to test now Update 9 RC5. What ins the best Option for Play. On Update 8 i use Option 6 or 9 (MegaRam 2) but 6 feels smoother in the Launcher & UI.
Gesendet von meinem R800i mit Tapatalk

Test the calculated values as they are based on your actual ram.
I added that feature for device that fell between the HP group settings.
I tried to calculate balanced values but course you can tweak them to be more or less aggressive by playing with the slot 3 value as that has the biggest effect on typical free ram.
The other great addition is the auto calculated min_free_kbytes value so that you won't ever get too low on free ram while allowing for apps to be cached for speed.

Thanks for answer. I now use Option 10 Custom Settings on U9 RC5. Launcher is Die Hard.
Here a Screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you Update the Supercharger to final U9 must i Run this or is RC5 okay?
Gesendet von meinem R800i mit Tapatalk