Related
Dear all,
I am new to all this.
Been trying to access the ftp site for upgrades however been unsuccessful.
I have read the wiki regarding the ftp server and did as it said.
I have been trying to access the frp server with my internet browsers (mozilla and internet explorer) with no luck.
Error message :" Connection timed out"
I have also downloaded ftp client software and again i keep getting the following error messages.
Connection Error
This could be caused by any of the following reasons:
Your network connection is down.
The host address is incorrect.
The server you are attempting to connect with is not available.
Click the Details button to view information from the connection log.
I have also spoken to my internet service provider but they seemed unable to help!!
I have tried but i don't seem to be getting anywhere!!!
Is there something i am missing ?? Please advise as i am getting tired of all this .
Thanks
I just installed the latest WM6.1 rom by Kavana. I'm trying to connect to my private/work network, and I need to use EAP type "Smart Card or Certificate", but only PEAP and TLS are listed. Are there any solutions to this issue? I searched on this forum, but could only find the same question asked (but not answered) here:
http://forum.xda-developers.com/showthread.php?p=2028467&highlight=Smartcard#post2028467
Thanks!
Sorry for the lack of details but I had a similar problem. There are several google references to various ways to get certificates working. You can also disable certificate checking which is what I elected to do for now.
To force WM5 or WM6 to accept the PEAP server's certificate without attempting any other validation, add the following registry key:
[\HKLM\Comm\EAP\Extension\25\]
"ValidateServerCert"=dword:00000000
This worked for me. More good hacks and the full article/blog http://www.mobilewave.ro/forum/topic-2549.html
Can you link to those several references on google? Why is the smartcard or certificate option missing from this rom anyway? Are there any registry hacks to get this option back?
Hey man, do your home work and google and you can always change the registry entry if you think that the network your are connecting too is not trustworthy. Otherwise I think you will spend many hours of trial and error like I did.
I tried
"ValidateServerCert"=dword:00000000
I am still not able to connect to network. Also as said above, the TLS is not showing the certificates & smartcard. Also when I click on TLS "properties" nothing shows up. I have certificates installed, I can see it from Settings->Security->Certificates.
Any help. It is getting very frustrating.
Bump. Please chime in.
I really didn't want to post this, honest. I have searched xda. I have searched the web. I have found other threads. I have followed the suggestions. But, it seems that my exgirlfriend may have been right, I'm an idiot.
I can't get my Hermes to connect to my office exchange server. The settings on my end are correct, the issue is on my office's end.
When I sync I get an error and support code 0x80072F17. I know that it's a certificate error.
IT is not going to help me on this one, so I'm on my own. I have tried to manually import the certificate. Didn't work. I tried making a regedit I found on another thread. Didn't work. I tried combinations of various settings. I only time I don't get an error code is when my device begins to endlessly prompt me for my password.
I'm sorry to post, but it's my last option. Does anyone have any work arounds for this error? Is there a way to have my device ignore the certificates? Is there anyone out there that can help??
There must be some way. My colleagues, both of them with HTC Trinity's, original WM5 roms came across this error when the certificate on our Outlook Web Access was about to expire. Me, however, with my HTC TyTN WM6 never got this issue. I'm not sure why. I know I've installed a couple of cert cabs, the one they call sdkcerts.cab and one more. Search for that cab and see if it helps. I always figured it made the device accept non signed software but maybe it helps for these kinds of issues as well.
You just must set correct date and time for you phone and try again.
I'll try and give you a hand...
First off, you need to know a few things to set this up.
(1) The FQDN of you company used to access the OWA (Outlook Web Access), for example, mail.mycompany.com/exchange
(2) The NetBIOS name of your local domain at your office (Right click the My Computer icon on your office pc and select Computer Name and note the Domain. If your IT dept did it the recomended way it'll have a .local extension, for instance, lawoffice.local. You'll use just the domain name without the extension, ie: lawoffice. (without the period, LOL)
(3) I absolutely never use my PC to configure my ActiveSync on my devices, just to initailly copy the certificate to the Storage Card.
Two ways to do the certificate. First is the method I always used until I discovered the second method, which is in my sig.
(BTW, substitute YOUR FQDN for mine, duhh! )
(1) Install the certificate on your PC by going to the FQDN of your OWA in Internet Explorer 7 on your PC, not your PDA (XP is much easier, Vista is quite difficult to do this)
For example, open IE7 and put mail.mycompany.com/exchange in the address bar. You should initially get a "There is a problem with this website's security certificate" error, click on "Continue to this Website" Now, next to the address bar at the top you'll see Certificate Error", click it, View, Install, Next, Next, Finish, Yes. Then you'll see "The import was sucessful" <damn, that took a while!)
Close IE 7 completely and reopen it, put "mail.mydomain.com/exchange" in the address bar and you'll go straight to the OWA page, meaning that your import WAS sucessful, yipee!
(2) Click on Start, Run and type "mmc" and OK. This opens the Microsoft Management Console and you'll see Console1 at the top. File, Add/Remove Snap-In, Add, Certificates, Finish, Close, OK. Now expand Certificates, Trusted Root Certification Authorities, Certificates. Find YOUR certificate in the list. Right click, All Task, Export, Next, DER encoded binary, Next, File name. I use c:\mail.mydomain.com so that I can find it easily. Now finish and you'll get the Export was sucessful message.
(3) Connect to your PDA via ActiveSync as a guest, kill your partnership if it exists, you don't need it), copy the cert to your Storage Card and execute it from there.
Now disconnect youR PDA AND open ActiveSync. Server address is the FQDN of you company without the /exchange, for example, mail.mycompany.com. Leave the check mark on the SSL. Next put your user name, password and the NetBIOS name of your domain. The configure you options for the number of days to sync, etc.
That's it!
Now... once you do that and it works, follow this thread, Auto-provisioning POP3 or Exchange mail via UC Mini how-to.
so you can create a cab to do this automatically!
I had this problem before.
For me, it was due to the fact that I installed CESTAR and it messed up my certs. Unintalling CESTAR won't fix it. You got to reload the rom.
From there, I used Leies' Chinese character support which is free and doesn't mess up the certs.
SOLVED
I have been at this issue for over 2 days now, dealing with the error 0x800072f17. About 5 min ago i fixed it. After narrowing the problem down to a certificate error i then proceeded to look at the certificates. There were two in the certificate store (personal) and both were self signed.
One was XXXX (server name) and the other was XXXX(company name) CA.
The server name one had expired. Seeing as how it is self signed, i had our it admin renew it. He forgot to re-assign it to the outlook web access, so i did it myself in the Internet Information Services console on the server.
This had solved only 1/2 of the problem.
The certificate was assigned to the exchange server, not the OWA web site. After discovering that i could not change the issued to name, or create a new certificate (not an admin) i decided to change the activesync settings to sync the INTERNAL OWA address, which is servername.internaldomain.externaldomain.com (this had not previously worked due to the expired certificate)
Now i have a fully functioning push email system.
Nearly all done without admin permissions.
Whilst im new to this site, feel free to pm me about it.
Solving this is the most satisfying thing i have done this year lol.
But does this allow you to get/check email from outside your location? Or do you have to establish a VPN first?
I am new to tweaking my phone, it is a ATT Tilt 2 and I currently have the Energy Rom and Co0kies. My question is that I cannot connect to ATT My MEdia net thru Opera 10. Can anyone give me any pointers on how to configure it to have opera connect to My Media net.
Thanks
Colorado
Check this post, ignore steps 1-4
http://forum.xda-developers.com/showpost.php?p=5870098&postcount=416
Thanks for reply, but no help...
JColorado said:
Thanks for reply, but now help...
Click to expand...
Click to collapse
I think you could have been a tad more vague.
How is it possible that you were able to flash a rom and Hardspl the phone but you are unable to load a cab?
When you replaced the rom all the factory settings for your provider were erased. The cab he pointed to you reinstalls the ATT settings. You will still have to go to the connections box and select what you want your data connection to be.
Ask a proper question and on this site you are likely to get a great and informative response.
Oh, and welcome to XDA.
Well, Sorry if my question seemed vauge, Thanks for the cab file. I was able to install it no w/ no problems. My problem is not that I cannot connect with My MEdia net for internet connection, but I am trying to access the the ATT Stock My MEdia net personal Home page using Opera or any Browser.
Any help would be appreciated...
you have to enable the proxy to view medianet sites
go to this thread and download the proxy manager cab, once installed, just open up the enable proxy and you'll be good to go.
Thanks, Will install and check it out thanks...
Installed cab and restored hidden proxys, but I am unable to connect to the site? If anyone is familar with the stock ATT site it is device.home\
Broswer just says unable to connect? Stumped, I have been searching for days... Any input would be appreciated.
Thanks
JColorado said:
Installed cab and restored hidden proxys, but I am unable to connect to the site? If anyone is familar with the stock ATT site it is device.home\
Broswer just says unable to connect? Stumped, I have been searching for days... Any input would be appreciated.
Thanks
Click to expand...
Click to collapse
The ATT Proxy cabs are for internet explorer. For Opera you need to modify the opera config. To do this point the Opera browser to "opera:config"
Once there, go to the Proxy settings and enable these:
Enable HTTP 1.1 for proxy
HTTP server=wireless.cingular.com
HTTPS server=wireless.cingular.com
Use HTTP
Use HTTPS
Use Proxy On Local Names Check
Save the settings. This will get you access to http://device.home
Unfortunately, Celluar Video will not work as it checks the User Agent, and Opera 10 is not supported through the ATT Proxies. You can try setting a custom User Agent in "opera:config" and set it to something like:
"HTC-ST7377/2.07.401.1 (80303) WWE Opera/9.70 (Windows NT 5.1; U; en)"
I have no clue if this will work though.
-e
IDK
Thank you for your help, I am still having difficulties...
It basicly timed out trying to connect to the site, so I tried a basic site i.e. google and it still was timing out? I will try again, with the help of one of my co-workers who is more tech savy using the TP2 aswell but is w/ verizon
L2TP work as well.
IKEv2 not route , and can not get the vaild IP address.
Can anyone solve this problem?
0oVicero0 said:
L2TP work as well.
IKEv2 not route , and can not get the vaild IP address.
Can anyone solve this problem?
Click to expand...
Click to collapse
are you on Redstone build ?
seems VPN broken on Redstone , not only IKEV2
It's working fine for me. IKEv2 IPsec, Strongswan server.
Requires editing the connections file on the phone, though. Windows 10 mobile (same for PC) will not use the default route provided by the VPN server and there is no toggle to send all the traffic through the VPN like there was on Windows Phone 8/8.1 in the VPN connection settings GUI.
So, 'IpPrioritizeRemote=1' has to be set manually for the connection in rasphone.pbk on the phone. This can be achieved and requires an NTFS formatted SD card with the modified rasphone.pbk and a symbolic link to 'C:\Data\USERS\DefApps\APPDATA\ROAMING\MICROSOFT\Network\Connections' (you can make this symbolic link on the PC).
First you have to create a VPN connection on the phone, then delete it. This will make 'C:\Data\USERS\DefApps\APPDATA\ROAMING\MICROSOFT\Network\Connections\Pbk\' user writable and you can put a modified rasphone.pbk file in that location by accessing it through the symbolic link on the SD card.
If you don't know how to make the rasphone.pbk file, first configure the connection as it should be on the phone, then copy rasphone.pbk from the phone, edit it on PC and add 'IpPrioritizeRemote=1'. Delete the VPN connection from the phone, and put the modified rasphone file in its place.
Reboot might be required after copying the file manually.
^ This is for phones that can't be interop unlocked like my Lumia 950XL. It's much easier for other phones which can be unlocked and full FS access is achievable.
Pretty stupid omission on Microsoft's part. I've been shouting about it on windows feedback since Windows 10 Mobile was released to insiders, but no one listens.
VPN is broken in Windows 10. Period! Microsoft it's not going to fix it.
w.bogdan said:
VPN is broken in Windows 10. Period! Microsoft it's not going to fix it.
Click to expand...
Click to collapse
No period. It's broken, but it can be made to work. Who put you in charge of dropping the period?
DLS123 said:
No period. It's broken, but it can be made to work. Who put you in charge of dropping the period?
Click to expand...
Click to collapse
Search for "Windows 10 DNS resolution" or other VPN related issues in Windows 10. It's not a bug, it's a feature ... for NSA, the government of China and so on.
w.bogdan said:
Search for "Windows 10 DNS resolution" or other VPN related issues in Windows 10. It's not a bug, it's a feature ... for NSA, the government of China and so on.
Click to expand...
Click to collapse
I know about it and took measures against it. They call it Smart multi-homed name resolution. It can be disabled on Desktop and also the order of DNS servers used can be set for each VPN connection. This isn't really caused by the broken built-in VPN client, but the way Windows 10 itself works out of the box.
DLS123 said:
I know about it and took measures against it. They call it Smart multi-homed name resolution. It can be disabled on Desktop and also the order of DNS servers used can be set for each VPN connection. This isn't really caused by the broken built-in VPN client, but the way Windows 10 itself works out of the box.
Click to expand...
Click to collapse
It's not just desktop. On W10M, DNS leaks, VPN connected icon is barely visible and you don't get notified if the VPN connection drops. Is hard to believe Satya Nadella is so dumb not to notice.
w.bogdan said:
It's not just desktop. On W10M, DNS leaks, VPN connected icon is barely visible and you don't get notified if the VPN connection drops. Is hard to believe Satya Nadella is so dumb not to notice.
Click to expand...
Click to collapse
I know there are DNS leaks on W10Mobile and multi-homing can't be disabled, but I don't have a problem with that. The purpose of VPN for me is to gain access to other private networks and encrypt the communication with them. DNS leaks aren't that critical. It's not like I don't want my employer to know what websites I access while connecting to VPNs from their network. I couldn't care less to be honest that they're logging my DNS querries. And I also don't live in China.
Even if they have my DNS records they still won't ever be able to break the encrypted IPsec tunnels and get any glimpse of what's passing through them.
Wasn't able to download rasphone.pbk from the phone but could upload one.
I used my Windows 10 PC and created the connections there. Then I disabled IpPrioritizeRemote and used the powershell cmdlet Add-VpnConnectionRoute to add a route to the pbk file pointing to my local subnet.
I am now able to connect to the internet and access corporate resources at the same time.
I however couldn't connect from one particular app which worked in 8.1. There may be issues with non universal apps.
DLS123 said:
It's working fine for me. IKEv2 IPsec, Strongswan server.
Requires editing the connections file on the phone, though. Windows 10 mobile (same for PC) will not use the default route provided by the VPN server and there is no toggle to send all the traffic through the VPN like there was on Windows Phone 8/8.1 in the VPN connection settings GUI.
So, 'IpPrioritizeRemote=1' has to be set manually for the connection in rasphone.pbk on the phone. This can be achieved and requires an NTFS formatted SD card with the modified rasphone.pbk and a symbolic link to 'C:\Data\USERS\DefApps\APPDATA\ROAMING\MICROSOFT\Network\Connections' (you can make this symbolic link on the PC).
First you have to create a VPN connection on the phone, then delete it. This will make 'C:\Data\USERS\DefApps\APPDATA\ROAMING\MICROSOFT\Network\Connections\Pbk\' user writable and you can put a modified rasphone.pbk file in that location by accessing it through the symbolic link on the SD card.
If you don't know how to make the rasphone.pbk file, first configure the connection as it should be on the phone, then copy rasphone.pbk from the phone, edit it on PC and add 'IpPrioritizeRemote=1'. Delete the VPN connection from the phone, and put the modified rasphone file in its place.
Reboot might be required after copying the file manually.
^ This is for phones that can't be interop unlocked like my Lumia 950XL. It's much easier for other phones which can be unlocked and full FS access is achievable.
Pretty stupid omission on Microsoft's part. I've been shouting about it on windows feedback since Windows 10 Mobile was released to insiders, but no one listens.
Click to expand...
Click to collapse
Thanks!!! It's working fine!
I think Microsoft do not want to fix it.
0oVicero0 said:
I think Microsoft do not want to fix it.
Click to expand...
Click to collapse
Yeah, looks like that's the case. There is very little feedback in insider hub about VPN problems. Very few care about these issues so probably MS has no incentive to fix and prefer to rely on MDM for VPN configuration on these devices. Now if only that were an option for mere mortals...
How to import self-signed key or export builtin cert for a strongswan server?
DLS123 said:
It's working fine for me. IKEv2 IPsec, Strongswan server.
Click to expand...
Click to collapse
How did you get the VPN connection set up properly (aside from the IpPrioritizeRemote setting)?
I've set up a strongswan server and generated my own self-signed keys using ipsec pki, but when I import the key to my Lumia 1520 (by tapping it using the Files app and tapping import at the prompt), the VPN connection will not send that cert. Instead it sends a certificate issued by CN=Microsoft Genuine Windows Phone CA15" with an OU that looks like a GUID.
So I tried punting and just exporting that certificate to place on my strongswan server ... but I can't figure out how to get the certificate off the phone either. So how do I do either one?
rlively said:
How did you get the VPN connection set up properly (aside from the IpPrioritizeRemote setting)?
I've set up a strongswan server and generated my own self-signed keys using ipsec pki, but when I import the key to my Lumia 1520 (by tapping it using the Files app and tapping import at the prompt), the VPN connection will not send that cert. Instead it sends a certificate issued by CN=Microsoft Genuine Windows Phone CA15" with an OU that looks like a GUID.
So I tried punting and just exporting that certificate to place on my strongswan server ... but I can't figure out how to get the certificate off the phone either. So how do I do either one?
Click to expand...
Click to collapse
I don't know what self generated certificate your phone sends, but you shouldn't use that.
You should generate a client certificate on the strongswan server then you should include both the root CA and the client certificate and pack them together in a PKCS 12 file (.p12) which you open on the phone and import. The phone will choose the proper certificate stores to import to. Did you do that?
https://www.zeitgeist.se/2013/11/22/strongswan-howto-create-your-own-vpn/
Just follow this tutorial., with the only mention that you should add "--flag clientAuth" to the command line for generating the client certificate.
DLS123 said:
I don't know what self generated certificate your phone sends, but you shouldn't use that.
You should generate a client certificate on the strongswan server then you should include both the root CA and the client certificate and pack them together in a PKCS 12 file (.p12) which you open on the phone and import. The phone will choose the proper certificate stores to import to. Did you do that?
Just follow this tutorial., with the only mention that you should add "--flag clientAuth" to the command line for generating the client certificate.
Click to expand...
Click to collapse
Thanks, that is a good tutorial - I definitely did not use the clientAuth flag (the ipsec tutorial for openWRT didn't include it: openwrt doc/howto/vpn.ipsec.roadwarrior), so I tried generating new certs with clientAuth. Unfortunately I got the same results. My Win10 phone sent the same "Microsoft Genuine Windows Phone CA15" cert.
Did you import the PKCS 12 file just by tapping it in the Microsoft "Files" app on the phone or did you use another method? I'm verifying the certs with the Microsoft "Certificates" app, which does show that the original cert I generated has no "Enhanced usages" but the second has "Client Authentication." Still the builtin VPN client won't pick it to send to my strongSwan server.
I did away completely with my configuration and started over with the win7 configuration here: strongswan wiki: Win7CertReq but none of it will help if I can't get my phone to actually send the correct certificate ... this configuration did something a little different though:
My phone sent the correct certificate in the "received TLS peer certificate" line followed by these error messages:
no trusted certificate found for 'my-CN-here' to verify TLS peer
sending fatal TLS alert 'certificate unknown'
Despite the fact that I have the certificate pem in /etc/ipsec.d/certs ...
in any case it continues on and sends the Microsoft cert afterwards and then the server throws "no peer config found" (since I don't have the public cert loaded for that MS cert).
Followed up on the error here: strongswan wiki /issues/785
I also tried it with "eap_identity=%identity" instead of "eap_identity=%any".
Frustrating that it works great for Win7 but I just can't get a Win10 phone working. Any guides out there specifically for Windows phone + Strongswan?
rlively said:
Thanks, that is a good tutorial - I definitely did not use the clientAuth flag (the ipsec tutorial for openWRT didn't include it: openwrt doc/howto/vpn.ipsec.roadwarrior), so I tried generating new certs with clientAuth. Unfortunately I got the same results. My Win10 phone sent the same "Microsoft Genuine Windows Phone CA15" cert.
Did you import the PKCS 12 file just by tapping it in the Microsoft "Files" app on the phone or did you use another method? I'm verifying the certs with the Microsoft "Certificates" app, which does show that the original cert I generated has no "Enhanced usages" but the second has "Client Authentication." Still the builtin VPN client won't pick it to send to my strongSwan server.
I did away completely with my configuration and started over with the win7 configuration here: strongswan wiki: Win7CertReq but none of it will help if I can't get my phone to actually send the correct certificate ... this configuration did something a little different though:
My phone sent the correct certificate in the "received TLS peer certificate" line followed by these error messages:
no trusted certificate found for 'my-CN-here' to verify TLS peer
sending fatal TLS alert 'certificate unknown'
Despite the fact that I have the certificate pem in /etc/ipsec.d/certs ...
in any case it continues on and sends the Microsoft cert afterwards and then the server throws "no peer config found" (since I don't have the public cert loaded for that MS cert).
Followed up on the error here: strongswan wiki /issues/785
I also tried it with "eap_identity=%identity" instead of "eap_identity=%any".
Frustrating that it works great for Win7 but I just can't get a Win10 phone working. Any guides out there specifically for Windows phone + Strongswan?
Click to expand...
Click to collapse
I import the certificates from file explorer on phone or from the OneDrive app, doesn't matter.
Have you actually set the EAP identity correctly in the client certificate? CN has to be exactly the same as --san
That's the eap_identity which has to be known if you use EAP-TLS.
I don't know what else to say, maybe post your ipsec.conf with censored IPs
DLS123 said:
I import the certificates from file explorer on phone or from the OneDrive app, doesn't matter.
Have you actually set the EAP identity correctly in the client certificate? CN has to be exactly the same as --san
That's the eap_identity which has to be known if you use EAP-TLS.
I don't know what else to say, maybe post your ipsec.conf with censored IPs
Click to expand...
Click to collapse
For the moment I just have mschap authentication with no certificate and it works. The certificate is just giving me fits.
On my client certificate my CN is not the same as the san. My san is set to the FQDN of my VPN server ... the CN of my client certificate is an identifier for my client.
What does the VPN server use for eap_identity - the CN from the client certificate when set to eap_identity=%identity ?
---------- Post added at 10:01 PM ---------- Previous post was at 09:35 PM ----------
rlively said:
For the moment I just have mschap authentication with no certificate and it works. The certificate is just giving me fits.
On my client certificate my CN is not the same as the san. My san is set to the FQDN of my VPN server ... the CN of my client certificate is an identifier for my client.
What does the VPN server use for eap_identity - the CN from the client certificate when set to eap_identity=%identity ?
Click to expand...
Click to collapse
My server certificate does have a CN and san that match. I thought I read somewhere that having that same value in the client san would help the client match up the cert to send to the server, at least for Windows Phone. Of course I can't find that guide now, so maybe I misread. I do see that in the example on https://www.zeitgeist.se/2013/11/22/strongswan-howto-create-your-own-vpn/ that the server CN and san match and the client CN and san match each other.
In the client certificate you should have [email protected]_FQDN --san server_FQDN --flag clientAuth
the eap_identity used by strongswan is the part before @ from CN.
It won't match anything when using eap_idenity=%identity if you don't do it like this.
Are there any relevant registry files we can access with interop tools?
DLS123 said:
It's working fine for me. IKEv2 IPsec, Strongswan server.
Requires editing the connections file on the phone, though. Windows 10 mobile (same for PC) will not use the default route provided by the VPN server and there is no toggle to send all the traffic through the VPN like there was on Windows Phone 8/8.1 in the VPN connection settings GUI.
So, 'IpPrioritizeRemote=1' has to be set manually for the connection in rasphone.pbk on the phone. This can be achieved and requires an NTFS formatted SD card with the modified rasphone.pbk and a symbolic link to 'C:\Data\USERS\DefApps\APPDATA\ROAMING\MICROSOFT\Network\Connections' (you can make this symbolic link on the PC).
First you have to create a VPN connection on the phone, then delete it. This will make 'C:\Data\USERS\DefApps\APPDATA\ROAMING\MICROSOFT\Network\Connections\Pbk\' user writable and you can put a modified rasphone.pbk file in that location by accessing it through the symbolic link on the SD card.
If you don't know how to make the rasphone.pbk file, first configure the connection as it should be on the phone, then copy rasphone.pbk from the phone, edit it on PC and add 'IpPrioritizeRemote=1'. Delete the VPN connection from the phone, and put the modified rasphone file in its place.
Reboot might be required after copying the file manually.
^ This is for phones that can't be interop unlocked like my Lumia 950XL. It's much easier for other phones which can be unlocked and full FS access is achievable.
Pretty stupid omission on Microsoft's part. I've been shouting about it on windows feedback since Windows 10 Mobile was released to insiders, but no one listens.
Click to expand...
Click to collapse
Hi I tried your manual, unfortunately without any success
If I Read it correctly you do the following steps:
1) Format sd card on NTFS
2) On the sd card create symbolic link to: C:\Data\USERS\DefApps\APPDATA\ROAMING\MICROSOFT\Network\Connections
3) Insert sd in phone
4) Create a vpn connection on the phone
5) Delete al the vpn connections on the phone
6) Use the phone to put a new (modified) rasphone.pbk file on the sd card (though onedrive??). I cant access my sd om my pc when usb is connected
7) Reboot the phone
8) Make a new vpn connection (can it have a different name?)
Can someone verify if i miss something?
I'll be very happy if this works