I have a bluetrek S2 headset, Since I flashed my MDAC III to WM6(B&B) I'm having problems keeping the headset and my device paired. I flashed WM6.1(B&B5.0) to the device but the problem still exist. I can pair them to each oter, and everything works fine. When I turn of the headset( to recharge or to save battery) The connection is lost the next time I turn it back on, I do have to pair them again. First I tough it was my headsets problem, but then I tried to pair a BT GPS mouse, the same result. I have the same problem pairing this GPS with other devices(TyTN, iMate Jamin) running WM6. Does anyone know how to fix this bluetooth problem I'm having?
There might be a connection here (no pun intended). For quite sometime, I was using an old SE637 phone and had it working flawlessly with my Garmin c550 GPS.
During an hour and a half trip yesterday, the Garmin notified me 3 times that the bluetooth connection with the Tilt was lost (the SE profile had already been removed from the Garmin). I never saw this message before with the SE. FWIW, the 2 devices are no more than 2 or 3 feet apart at all times, and neither of them are physically touched during the trip. I'm concerned that this might be an HTC problem. Any thoughts?
smonte said:
I have a bluetrek S2 headset, Since I flashed my MDAC III to WM6(B&B) I'm having problems keeping the headset and my device paired. I flashed WM6.1(B&B5.0) to the device but the problem still exist. I can pair them to each oter, and everything works fine. When I turn of the headset( to recharge or to save battery) The connection is lost the next time I turn it back on, I do have to pair them again. First I tough it was my headsets problem, but then I tried to pair a BT GPS mouse, the same result. I have the same problem pairing this GPS with other devices(TyTN, iMate Jamin) running WM6. Does anyone know how to fix this bluetooth problem I'm having?
Click to expand...
Click to collapse
No one with an possible solution, or at least with the same problem??
Same problem here
I have just received a new HTC TyTN II on Orange that has the same problem. My old one (windows mobile 6.0) had no problem with my Motorola H12, but the new one (Windows Mobile 6.1) can't keep the pairing, and I have to turn Bluetooth on an off to get the connection. Always have to enter the passcode.
Version data is:
CE OS 5.2.19212 (Build 19212.1.0.3)
Processor: MSM7200-400MHz
ROM version 1.65.16.25
G 25.83.40.02H
D 3.28.00.00
Any help /advice much appreciated!
O.
Fixed itself...
This seems now to have fixed itself - I had to enter the password twice in a row for some reason and then it worked properly. So now all happy...
Windows Mobile 6.1 rocks...
I have problems with my Bluetooth and the paired device in the car with almost every recent ROM.
After about 10 minutes driving with a connected phone, the Bluetooth shuts down on my Diamond. When I go to Settings -> ... > Bluetooth -> Mode -> Turn on Bluetooth is unchecked. If I check it again it connects again with the phone and about 10 minutes later it's off again.
I went back to the RUU_Diamond_HTC_WWE_EastEurope_1.93.479.3_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe. It's against my feelings, believe, etc. but I want to solve it .....
I installed Advanced Configuration Tool (3.0), went to Bluetooth -> Audio gateway power save and Disabled it. I did it because I was reading about suspended devices and power save features. I thought that the loss of Bluetooth is been caused by a saving power feature.
After a soft reset, the Bluetooth stays connected.
It's a start, but I'm not happy with it ... I would like to use cooked ROM's and optimal settings in the ROM.
There are other tweaks too in Bluetooth, for example the supported bitpool, etc. Perhaps those settings cause the shutdown of a connected Bluetooth device instaed of the power save feature.
Has anyone this kind of problems too with paired Bluetooth devices?
If so, would you like to help me to find the cause?
If not, can you describe what device you use (Jabra, TomTom, car radio, etc.), which ROM, which radio and extra tweaks?
Hi
I do have the same problem. I am using my Diamond with my Opel Astra (Vauxhall) and a CD70 radio with built in handsfree (Opel UHP). It disconnects after 10 minutes and after calls. Everything else works fine. Changing rom and radios has not helped so far. If I don't close the comm manager it stays connected but disconnects after a call because the comm manager is closed with the end of the call. Is there a way to force the comm manager not to close?
Olli
olliver said:
Hi
I do have the same problem. I am using my Diamond with my Opel Astra (Vauxhall) and a CD70 radio with built in handsfree (Opel UHP). It disconnects after 10 minutes and after calls. Everything else works fine. Changing rom and radios has not helped so far. If I don't close the comm manager it stays connected but disconnects after a call because the comm manager is closed with the end of the call. Is there a way to force the comm manager not to close?
Olli
Click to expand...
Click to collapse
I have a CD70 too in a Opel Zafira.
This "comm manager" thing is interesting, but it looks to me like an Opel issue.
Can't you flash firmwares by opel?
Riel said:
Can't you flash firmwares by opel?
Click to expand...
Click to collapse
That's an option, but my Trinity (P3600) performed great with the same car. Will an upgrade solve my problems? I know one thing, it's not cheap either.
I tried it with different ROM's, but it still happens.
I tried it with different radio's, nothing changed.
Till today, I've got now the new radio (v1.05.25.BS14).
http://forum.xda-developers.com/showthread.php?t=432770
It has fixed the delays in GPS + faster GPS fix and more important fo me Bluetooth didn't stop today.
I'm sure 100% sure yet, but seems to be better.
I got something to complain too about the new radio. The radio signal is less strong than the .05 radio.
Same problem here
My Vectra is equipped with CD70.
Previously I've owned a Kaiser and the problem was solved by one of the 6.1 radios, bluetooth connection was rock solid.
Right now I have the same problem with Diamond - after every single phone connection, when I'll hangup, the phone disconnects CD70. When I'll try to reconnect manually using CD70 everything is fine.
I've noticed that the same problem exists when I'm using Nokia bluetooth headset - one call, bluetooth connection dropped...
I've tried following Diamond radios:
.05
.07
.08
.BS14
and two Raphael radios by Bepe:
1.03.25.18
1.02.25.11
Each Diamond radio behaves the same way. Each Raphael radio adds a bonus - random bluetooth connection problems.
Right now I'm back with .05, I think I'll look for the software I've seen once (can't recall the name) - it's a PDA application designed for connecting to the car bluetooth systems and it has been cerftified to work fine with CD70.
Use Jetware Mobile for htc-diamond.
jetware
That's the software I couldn't remember the name.
Anyway I gave it a shot and it gets even worse, I couldnt get the connection lasting longer then 2-3 minutes, totally unstable
Right now I got back to radio .08 - the bluetooth link is rock solid, I guess I'll just need to get used to reconnecting after each phone call
Same bluetooth system in my car, same problems as you guys.
To avoid the disconnections after calls you need to go, with 'Advanced Config' to bluetooth->Audio gateway power save, and switch it to disabled.
For me this little change solve the 'first' problem, but I have another one that I don't know how to solve: the aparently random bluetooth disconections. Sometimes BT is not disconnected in hours, sometimes in days.
I am also using Jetware Mobile, but i didn't feel any improve...
The random ones depend on the radio rom version - I was using .05 and it was rock solid.
I will try .16 with audio gateway started and with power save disabled as you advised - I thought about it earler but previously I tried to disable the power save without enabling audiogateway service
Well, we will see if it works or not.
Hi,
I also have a Vectra CD/70 combination, for 2 yrs now.
I had a HTC3300 and 2years i had not a single problem with Bluetooth connection.
Now i have a HTC Diamond Touch Pro and have the same problems you guys have.
I tried all your suggestions, radio's and so on with no good result.
The good news is .. its an Opel problem and it seems to be that a Bluetooth Firmware Upgrade is available from Opel Germany. I just contacted my dealer and next week he will Upgrade my bluetooth firmware.
I will keep you guys informed.
Hello,
had the same problem with my Opel CD70.
Using Jetware Mobile and limited the entrys who copied to the car to a max. of 5. Also disable the call lists. Now it works.
I think the Opel/Vauxhall Bluetooth Connection disabels if to many entries are copied to the car.
Hello,
any News about our Bluetooth Problem ???
I also have a CD70 from Opel and I cannot understand why my Diamond swich of Bluetooth after a while ?
Is it an Opel-Problem or does anybody now an Application which helps ?
Thanks a lot for Your help,
Stepos
Hi,
I am currently using BTrestore (http://home.casema.nl/rgschmidt/WM/Downloads/BTRestore_V_1_0_0_PPC.ARMV4.CAB). This utility checks the status of the bluetooth stack every 5 secs and (re)enables it everytime it's down. It seems that the 5 secs are short enough to keep the phone connected. It's not a real solution and unfortunately this tool is sometimes instable too, but it absolutely extends the connection time with the UHP.
Maybe bullock can tell us if the carkit upgrade solves anything...??
I also created a ticket at HTC, but they refuse to troubleshoot user specific issues. They told me they only look into issues if they get enough calls from different users and to keep an eye on the update site (they seem to be able to solve issues without knowing what the actual issue is...). So I would encourage everyone here to create a HTC ticket for this issue. I still think it is an HTC issue: a bluetooth stack should never go down without any user intervention.
Good luck!
BTrestart and Jetware Mobile doesn`t help, my Touch diamond disconnect again from Opel CD70 and swiched off Bluetooth !
Can anybody help ?
Sorry guys, the OpelDealer is still "searching" for the Bluetooth upgrade.
After several phonecalls maybe next week (1st week of Febr) it will be made available to the dealer.
Like i said ... i willl keep you informed ... still have this lousy problem !!
..does anybody use the new Rom 2.03 ? Any difference ?
I also asked my Opel-Dealer for an Update of UHP, next week I 'll get new Information....
... well guys I had my CD70 updated !! I am/was very sceptical because the only thing they did was a re-install of the Language of the Navi System with a version 2005 CD. I asked if that was all to correct my Bluetooth problem .... the (smiling) answer was YES.
I have it now for 24hrs ...... and Bluetooth is still on )
I will let you know the result after a week !!
..i can't beleave it works with a 2005-update ! Great !
My Opel-Dealer is still busy in selling 10 Opel Corsa every day (..the magic word is "Abwrackprämie") , so I'll have a date there next week...
When I bought my Vectra the dealer had also to reinstall the Language-CD, maybey it was the wrong version....
...... Sorry guys ......
This update DOES not do the magic trick !! So we have to find another solution
who has the right idea ??
I currently have a Diamond and TP2 with stock ROM's.
Diamond worked perfect with carkit untill i performed major ROM upgrade from htc.com. now it will connect and not reconnect on either device or carkit restart.
My TP2 behaves EXACTLY the same - connects and drops after either restarting. when connected it works fine - voice/dialing etc etc.
My car kit is a JVC KS-BTA200 connected to my KW-AVX810 head unit.
i've read all comments on google/xda's etc - well almost all! to no avail.
the devices are all set to visible obviously and all paired. ive read that a registry edit possibly fixes the issue but my TP2 & Diamond dont have the required reg strings. (that i can find!!)
i have the remote registry tool installed on my Desktop - so im ready to make changes!
please, if anyone can help i will very grateful!!
radak23 said:
I currently have a Diamond and TP2 with stock ROM's.
Diamond worked perfect with carkit untill i performed major ROM upgrade from htc.com. now it will connect and not reconnect on either device or carkit restart.
My TP2 behaves EXACTLY the same - connects and drops after either restarting. when connected it works fine - voice/dialing etc etc.
My car kit is a JVC KS-BTA200 connected to my KW-AVX810 head unit.
i've read all comments on google/xda's etc - well almost all! to no avail.
the devices are all set to visible obviously and all paired. ive read that a registry edit possibly fixes the issue but my TP2 & Diamond dont have the required reg strings. (that i can find!!)
i have the remote registry tool installed on my Desktop - so im ready to make changes!
please, if anyone can help i will very grateful!!
Click to expand...
Click to collapse
Hi, I am using my Touch Pro 2 with the same HU and Bluetooth adaptor as you but no such problem so far.
It used to have this problem then I try to connect using Window CE as the phone setup and choose another Connection Key instead of default 0000 to pair the phone with the HU.
ok, well i just tried connecting via searching for the device from the HU. it finds my device - i tap enter (to connect on HU) then it just jumps to a blue flashing 'connecting' then goes to a yellow 'error' straight away. if i select 'open' on the HU then it connects (connecting with a different ID - a number '6') but only untill i restart the HU.
also as a test i just tried an Xperia (just had one laying around LOL) and it does the exact same as mine!! ARRRRGHHH!
so im glad to say i believe it is not an HTC issue!
ok so i have an update - the problem is my HU will not pair correctly and it will not store a pairing. great.
another quick one - have found others are having trouble with their HU/adapters. thanks anyway everyone!
TP2 Bluetooth and voice dialing working fine ???
Have you tried to reset your carkit? I had the same problem after the rom-update with my TP1 and I put my carkit (Bury CC9060) back to factory settings. So I did the same this morning after I updated my TP2 and now it works just like a charm. Of course I don't know if your carkit has this possibility. Good luck, greetz Ton
'iznogoooog' - yes it work perfectly until you restart either device - 'ton66' - unfortunatley a reset is pretty much all i can do!!! eeeeek!
hopefully a reset will fix it! - i did unplug my b/tooth adapter then switch the unit on - then off then plug it back in.. didnt change anything.. oh well! will do complete re-set 2day!
BTW:
thanks so much for everyones help!
Got a questions. I am using the AVX-826 with build in Bluetooh. I want to know if you guys get the Signal Strength show on your Head unit is correct. on my unit pair with TP2. The Signal Strength indicator doesn't move. it always show the strength with my phone is connected to the unit and it stay that way.
The Battery Strength indicator does work and show the correct battery level.
I have exactly the same prob!
Hi,
I have a AXV800 and a BTA200.
My first device was a Artemis with WM6.0. No problem so far!
Then I changend to a Diamond with WM 6.1 and had the same problem as mentioned before. Now I tried my new TP2 and still the same problem.
And I tried the old Artemis again with a new 6.1 ROM and the same problem as on the other two phones.
Now I think it depends on the WM build. 6.0 seems to work 6.1 not!!!!!!!!!!
I did a reset on my AVX800 two times without luck!
I think I'm going to use a normal phone without Windows mobile for the next test!
Schelbi.
Every since I upgraded to Fresh 3.5 my bluetooth is not working. I'm using the BlueAnt Q2 headset and for some reason it can't pair. My phone can't find it and the bluetooth can't find my phone. I tried connecting my laptop to my phone and that works fine. Any suggestions?
I had the sam issue with MIUI Rom. All I did was change the Kernel,and that work for me. Try that it may work for you.
First of all, CleanROM is a wonderful ROM. I have installed it on my ATT Note 2. :good:
However I have one slight problem if you guys can help me figure it out.
My bluetooth connects perfectly to my car stereo (A Brand New Pioneer made in July 2012). I can make phone calls perfectly, but I cannot play media via bluetooth. Meaning, when I try to play music it does not send a signal to the radio.
I made some troubleshooting steps to no avail:
1. The bluetooth Media option is checked under the bluetooth settings.
2. The car stereo works perfectly with my rooted Galaxy S II with Stock ROM 2.3.5 (phone + media)
3. My Note 2 fails to send media signal to my GF's new car Stereo (2013 model). Hence this is NOT an issue of an outdated bluetooth receiver. Again here, the same issue: it connects when making phone calls, but no media playing.
4. I even unpaired all other devices from the stereo to no avail.
I am starting to think it is an issue with the ROM..Is there an app I can download or some patch to fix this, or should I try a different ROM.
It took me 2 days to finally set up everything on my phone and I would hate to have to erase all and start all over.
Thanks a lot in advance for your help.
privatewarrior1 said:
First of all, CleanROM is a wonderful ROM. I have installed it on my ATT Note 2. :good:
However I have one slight problem if you guys can help me figure it out.
My bluetooth connects perfectly to my car stereo (A Brand New Pioneer made in July 2012). I can make phone calls perfectly, but I cannot play media via bluetooth. Meaning, when I try to play music it does not send a signal to the radio.
I made some troubleshooting steps to no avail:
1. The bluetooth Media option is checked under the bluetooth settings.
2. The car stereo works perfectly with my rooted Galaxy S II with Stock ROM 2.3.5 (phone + media)
3. My Note 2 fails to send media signal to my GF's new car Stereo (2013 model). Hence this is NOT an issue of an outdated bluetooth receiver. Again here, the same issue: it connects when making phone calls, but no media playing.
4. I even unpaired all other devices from the stereo to no avail.
I am starting to think it is an issue with the ROM..Is there an app I can download or some patch to fix this, or should I try a different ROM.
It took me 2 days to finally set up everything on my phone and I would hate to have to erase all and start all over.
Thanks a lot in advance for your help.
Click to expand...
Click to collapse
I'm having the same problem different radio.