Hi,
Anyone know how to turn this auto-rotate screen?
I cannot see it happening, for example on the default web browser.
I turn and turn, but it does not go to landscape for example.
In the Settings -> Sound & Display -> I enabled the screen orientation already.
try calibrating the g sensor. somewhere in settings
Done. I have done it many times ...
It is being charged now, does this affect the accelerometer?
DAMN!
I did not know that the auto-rotate ONLY WORK ONE WAY!
The buttons must be in the right-side ....
It does not work if the buttons in the left side
*LOL*
I disabled the auto-rotate. Is it still possible to rotate on-screen keyboard to landscape manually while typing SMS etc? Thank you..
gogol said:
DAMN!
I did not know that the auto-rotate ONLY WORK ONE WAY!
The buttons must be in the right-side ....
It does not work if the buttons in the left side
*LOL*
Click to expand...
Click to collapse
yes, it's a design flaw. For me the volume should be up at the top. I keep hitting the volume when holding the device at Landscape.
Related
First of all, Gyrator is awesome.
I have one problem with it on my touch HD. I have set it to launch at start up, but when it does it doesnt work. It stays in landscape - it says <Orientation> in the top right hand corner of the Gyrator home screen. If I exit Gyrator and restart all is well.
Is there a way to fix this in settings or is it a known bug?
Pete917 said:
First of all, Gyrator is awesome.
I have one problem with it on my touch HD. I have set it to launch at start up, but when it does it doesnt work. It stays in landscape - it says <Orientation> in the top right hand corner of the Gyrator home screen. If I exit Gyrator and restart all is well.
Is there a way to fix this in settings or is it a known bug?
Click to expand...
Click to collapse
first of all for all respect it is not awesome at all
use Change Screen
I loaded change screen. It has some good functionality, but the sensitivity between screen change is a little sluggish,. I have adjusted the sensivity to full ( i think) with the slider fully to the left. Is that correct?
This may be a known issue, but I've found nothing through searching the forum or Google.
Running GedeROM, and everything works perfectly. Netflix plays well, but won't go full screen. When it first starts, the soft buttons are visible, as always. A few seconds in, the buttons hide, but netflix does not resize to fill the screen, so I have a half inch border around whatever is playing.
This is not a big deal but, with a seven inch screen, I'd like to be able to use as much of the screen as possible.
Is anyone else having this problem, and is there a known fix or different ROM recommendation?
Thanks in advance!
If your having the problem of netflix only being in portrait mode try toggling the screen rotation back and forth this should allow it to rotate to landscape mode sometimes it gets a little sticky also make sure you have 180 degree rotation enabled.
Thanks, but that's not the problem. Switching from protrait to landscape IS sticky, but does work
Netflix firsts starts filling MOST of the screen, except for the bottom half inch with the Back, Home and Multitask switcher buttons visible. After 3 seconds, these buttons shrink off the screen but the picture doesn't expand to fill the space vacated by the disappearance of the soft buttons.
Works fine on the phone and other devices...
Oh, I should mention that my other devices are running variants of Gingerbread, and in one case Froyo. This may be a function of ICS.
Being that gedeRom has true fullscreen maybe there is a feature that you don't have enabled auto hide or something of that nature maybe someone would know better than I cause I don't run gede have but not presently
Have you tried holding the power button a few seconds and then choosing to hide the status bar?
Do you have auto hide enabled under system in the settings menu?
Sent from my Galaxy Nexus using XDA Premium HD app
Thanks, Desanko. Turns out I'm an idiot. Problem solved!
I've just discovered that my gyro sensor doesn't work. I am running rooted stock 4.1.1. The phone can not detect tilt movements. And under Settings->Motion->Sensitivity settings->Gyroscope calibration, the blue dot does not move from the center, no matter which orientation the phone is held. All of the options under Motion don't seem to work. I just want to see if anybody else has the same problem before calling TMobile.
Firstly, this should have been posted in the q&a section.
And the blue circle isn't supposed to move. You lay the phone on a flat surface and it calibrates itself.
Sent from my SGH-T999 using Tapatalk 2
Moved to Q&A
Sorry for posting in the wrong section. You are right about the blue dot not moving. I downloaded a few apps that detect sensors and all built-in sensor seem to be working as they are supposed too. I have problem for example of taking screenshot with a palm wipe or zooming picture by tilting the device, muting phone by turning it over, etc. None of these features work on my phone. Will try to explore more to see what the real problem is.
tphone said:
Sorry for posting in the wrong section. You are right about the blue dot not moving. I downloaded a few apps that detect sensors and all built-in sensor seem to be working as they are supposed too. I have problem for example of taking screenshot with a palm wipe or zooming picture by tilting the device, muting phone by turning it over, etc. None of these features work on my phone. Will try to explore more to see what the real problem is.
Click to expand...
Click to collapse
Do you have the switch turned on next to motion in the settings?
Sent from my SGH-T999 using Tapatalk 2
tphone said:
I've just discovered that my gyro sensor doesn't work. I am running rooted stock 4.1.1. The phone can not detect tilt movements. And under Settings->Motion->Sensitivity settings->Gyroscope calibration, the blue dot does not move from the center, no matter which orientation the phone is held. All of the options under Motion don't seem to work. I just want to see if anybody else has the same problem before calling TMobile.
Click to expand...
Click to collapse
Before you go off the deep end, run the test on the sensor.
in the stock dialer:
Quick Test Menu
*#7353#
select the accelerometer tester and ilt the phone whatever way you want. If the arrows don't change, then the sensor isn't working. If the Arrows do change, then all good, no panic necessary...
Good Luck
Aloha
Thank you for your help. I ran the sensor test and the sensors work. I also turned on the Motion switch but the Motion features still don't work for me. Maybe this is a software issue. I will continue to explore and will report back if I've found something.
tphone said:
Thank you for your help. I ran the sensor test and the sensors work. I also turned on the Motion switch but the Motion features still don't work for me. Maybe this is a software issue. I will continue to explore and will report back if I've found something.
Click to expand...
Click to collapse
Hi,
Please do the following:
Pull the top notification bar down by using a downward swipe.
Tap on the Toothed Wheel in upper right corner
scroll down till you see the System divider (below the Add account line)
is Motion ON on the right side of it? if not, turn it on.
Tap on the word Motion
Are any of the options you want to use set with a check in the box?
if not, put the check in whatever you want to use by tapping on the box on the right of the function.
Example:
If you want to use Palm swipe for screen captures, tap on the box on the right of the option.
the boxes toggle these options so if you want the option off, then tap on the checkmark and it'll go off.
When you're done, click on the back button on the right side of the menu bar below the screen till you get back to the homescreen.
You are done, and the selected options should now function.
simple huh?
Thank you, bobolinko. I've been doing exactly what you described and no motion feature works for me. I begin to think that my software has a problem, because it does crash occasionally and software upgrade check hangs forever in the "checking for software updates..." screen and never comes back, no matter if I am on wifi or on 4G. Let me reinstall stock firmware and report back.
Try it like this:
http://www.youtube.com/watch?v=T4dPoY1Z6hc
Also, has it EVER worked?
Thanks!
bobolinko said:
Also, has it EVER worked?
Click to expand...
Click to collapse
Thanks for the video. I did exactly as shown and nothing happens. I never tried Motion before until I needed to capture my screen and discovered that it doesn't work for me. In the mean time, using PWR and HOME button at the same time does allow me to capture the screen, so I don't really need Motion feature working for me. I am just thinking that my software has a problem and I will need to reinstall stock. Thanks a lot for your help in any case.
bobolinko said:
Before you go off the deep end, run the test on the sensor.
in the stock dialer:
Quick Test Menu
*#7353#
select the accelerometer tester and ilt the phone whatever way you want. If the arrows don't change, then the sensor isn't working. If the Arrows do change, then all good, no panic necessary...
Good Luck
Aloha
Click to expand...
Click to collapse
im having the same issue. tried the accelerometer test and tilt the phone every which way but the arror didnt move at all. does that mean the accelerometer is done with. any fix for it?
also tried tsp dot mode, tsp grid mode, proximity and light sensors and nothing seems to happen during the test
As the title says, somehow I moved the primary short cuts the ones at the bottom of the home screen to the side where they are stacked vertically. They are over lapping existing short cuts that can no longer be pressed without the primary being activated.
So the question is how did I do it, and how do I get it back to normal where they are at the bottom again?
I have looked around and I can not find any real answers so help would be appreciated.
Commcat said:
As the title says, somehow I moved the primary short cuts the ones at the bottom of the home screen to the side where they are stacked vertically. They are over lapping existing short cuts that can no longer be pressed without the primary being activated.
So the question is how did I do it, and how do I get it back to normal where they are at the bottom again?
I have looked around and I can not find any real answers so help would be appreciated.
Click to expand...
Click to collapse
You probably turned on one handed mode - adds home back and recents keys to the right side. Generally a toggle in the notification bar, or somewhere in the settings you will find it. I hit toggles all the time justpulling the phone out of my pocket...
Hope this helps.
panaderodc said:
You probably turned on one handed mode - adds home back and recents keys to the right side. Generally a toggle in the notification bar, or somewhere in the settings you will find it. I hit toggles all the time justpulling the phone out of my pocket...
Hope this helps.
Click to expand...
Click to collapse
No I am afraid that was not it as the ONLY thing that was changed was the location of those primary shortcuts. The rest of the phone and display worked normally. The one hand mode cause the keypad for dialing to shrink and shift to the desired side. When this happened the keypad was still normal.
When you say primary shortcuts, are you talking about the dock? Or home, back, recent keys? If the latter, there is a Side key panel setting in display settings - one handed operation which does that without shrinking anything. Posting a screen shot here may help us identify your issue
Commcat said:
No I am afraid that was not it as the ONLY thing that was changed was the location of those primary shortcuts. The rest of the phone and display worked normally. The one hand mode cause the keypad for dialing to shrink and shift to the desired side. When this happened the keypad was still normal.
Click to expand...
Click to collapse
I assumed you meant the menu back and home keys, on rereading perhaps you meant the dock. Did you figure it out yet?
panaderodc said:
I assumed you meant the menu back and home keys, on rereading perhaps you meant the dock. Did you figure it out yet?
Click to expand...
Click to collapse
Yes I meant the dock, and no I have not figured out how I did it. I am now thinking maybe my display just wigged out and it ended up that way. I was able to fix by enabling easy mode then turning it back to normal mode.
So one of the reasons I updated for beta was that auto rotation feature. That even if I have it disabled my phone will suggest me on my navigation bar that I can click and change the orientation of the screen.
However I don't know if it's only me but it's not working at all. I'm on YouTube , or chrome or any other app and that aware button that should appear on my navigation but just doesn't appear at all. Every time I want to change to landscape I need to scroll my status bar and enable it on quick actions.
Anyone expericing the same problem or knows how to fix it?
Thanks for your help in advance
Not me...
How did You get P? By updating or flashing the image? Did you performed the Factory Reset?
I'm also facing the same problem. I did ota update from DP1
Auto rotate not working for me in YouTube with Beta
lywyn said:
Auto rotate not working for me in YouTube with Beta
Click to expand...
Click to collapse
You mean in full screen mode viewing, it is not going to landscape mode when video played and auto roate off?
srikanth.k39 said:
You mean in full screen mode viewing, it is not going to landscape mode when video played and auto roate off?
Click to expand...
Click to collapse
From the normal view (video at top, details and comments below) if I rotate device landscape nothing happens.
If I press the expand icon in corner of video it goes fullscreen and landscape even when holding device portrait.
lywyn said:
From the normal view (video at top, details and comments below) if I rotate device landscape nothing happens.
If I press the expand icon in corner of video it goes fullscreen and landscape even when holding device portrait.
Click to expand...
Click to collapse
Whatever is said happens to all when auto rotate is OFF.
With auto rotate ON, youtube is rotating when I rotate for me and all is working well w.r.t rotation.
My build number shows PPP2.18*****. I did not do clean install either. Just enrolled n got updated without wipe
srikanth.k39 said:
Whatever is said happens to all when auto rotate is OFF.
With auto rotate ON, youtube is rotating when I rotate for me and all is working well w.r.t rotation.
My build number shows PPP2.18*****. I did not do clean install either. Just enrolled n got updated without wipe
Click to expand...
Click to collapse
You clearly don't know what I'm talking about.
We this video with the new feature is Android P. Around 2m20s it shows the new feature that, even if you phone has the auto rotation OFF, when you rotate your device, a new icon appears on your navigation bars where you can tap and change the display to landscape. All with auto rotation OFF. To give you the opportunity to change it or not. If you have the auto rotation ON, Everytime you change your home orientation, it will go landscape mode even if you don't want to.
So that's the feature that's not working on mine. With auto rotation OFF ( how it should be ) when im in chrome, in YouTube , in all other apps and I change my screen orientation I don't get the icon appearing in navigation bar.
Jucacarvalho1987 said:
You clearly don't know what I'm talking about.
We this video with the new feature is Android P. Around 2m20s it shows the new feature that, even if you phone has the auto rotation OFF, when you rotate your device, a new icon appears on your navigation bars where you can tap and change the display to landscape. All with auto rotation OFF. To give you the opportunity to change it or not. If you have the auto rotation ON, Everytime you change your home orientation, it will go landscape mode even if you don't want to.
So that's the feature that's not working on mine. With auto rotation OFF ( how it should be ) when im in chrome, in YouTube , in all other apps and I change my screen orientation I don't get the icon appearing in navigation bar.
Click to expand...
Click to collapse
Sorry for the confusion.
What I mean is auto rotate works fine.
Even the new feature of rotation suggestion also works fine for me.
Check my screen shot attached. Rotation suggest icon is properly appearing in my nav bar when auto rotate off in youtube. However the icon appears for few seconds time limit and when we click it it stays with nav bar to re-rotate.
I shared build number to see there might be any differences due to region or something etc...
srikanth.k39 said:
Sorry for the confusion.
What I mean is auto rotate works fine.
Even the new feature of rotation suggestion also works fine for me.
Check my screen shot attached. Rotation suggest icon is properly appearing in my nav bar when auto rotate off in youtube. However the icon appears for few seconds time limit and when we click it it stays with nav bar to re-rotate.
I shared build number to see there might be any differences due to region or something etc...
Click to expand...
Click to collapse
Yeahhh it's exactly that. I don't know why it doesn't appear on mine . It's so useful when I'm at bed watching YouTube...
You did anything to activate it or it just appeared?
Jucacarvalho1987 said:
Yeahhh it's exactly that. I don't know why it doesn't appear on mine . It's so useful when I'm at bed watching YouTube...
You did anything to activate it or it just appeared?
Click to expand...
Click to collapse
I did not do anything to activate. It is working as is. Apart from changing auto rotate couple of times, nothing else I did w.r.t rotation setting.
Is ur build number same as mine?
srikanth.k39 said:
I did not do anything to activate. It is working as is. Apart from changing auto rotate couple of times, nothing else I did w.r.t rotation setting.
Is ur build number same as mine?
Click to expand...
Click to collapse
Yeah exactly the same =(