Could somebody check if there is any ringtone lag on Desire? When the caller hears the first ring will Desire start to ring like normal mobile phone or is there any delay? This is common issue with WinMo and Android (even when it's better on Android).
Yep, Android phones have timeout up to 0.5 second.
In that time phone try to find custom ringtone for caller.
Really lag may be some longer (less than one second).
Related
My P3300 takes a long tome to wake up when a phone call is coming in. Until it starts ringing, I have only about 1 second to answer, before it enters to the voice mail. I can see it "preparing" for incoming call (the small sign on the top bar), but until it start ringing - i sometime miss the call.
First I thought its the ringtone I chose, so I switched back to the default Windows ringtone - and still the problem continues.
I had a similar problem, I rang myself up from my landline to see exactly how long the phone took to ring and, it was just a few seconds. So I rang my operator O2 and they have me a code which I dialed up on the phonepad allowing me to choose in 5 second intervals how long the phone rings before going to answerphone.
Hi,
I am a new member here and I currently own a HTC Touch Diamond.
I am planning on buying a new phone only months after buying this one mainly because of two issues:
- When someone calls me, the phone only starts ringing after a few rings on the caller's side. I have missed many calls simply because of the delayed ring so by the time it does ring, the caller has hung up. Weirdly enough there is no delay in the phone lighting up and notifying the user of an incoming call, it's just the ringing that is delayed, so obviously it can detect the incoming call accurately and it is just a firmware issue. Originally it would be delayed by about 5 rings, but after a few modifications I've done from some websites, I've managed to reduce it to about a 2-3 ring delay. Either case the delay itself is unacceptable.
- The ring-tone volume is ridiculously low. I have tried all methods available such as manually adjusting the volume through registry hacks, using an application called Diamond Tweak, etc, but it simply is not loud enough.
I was wondering if anyone has experienced these issues before and if there is a fix for them now. I did a lot of research into fixing this in the past few months and to no avail. I have now given up but given that this forum is so active, I figured I might ask for help here incase there is a solution that has eluded me. By the way HTC customer support is useless. They fail to even recognize the problem and almost always conclude with a response along the lines of "we've forwarded you issue to the technical team and will get back to you if a solution is found." I am almost certain that will never happen and I am extremely doubtful that they've even bothered to forward anything to anyone.
I was hoping as a last resort that this problem could be solved by replacing the Windows Mobile OS with Google Android OS, but it appears Android OS is still not fully compatible with the Touch Diamond.
Anyway, any help with this would be very much appreciated. Thanks!
Yeah, this is certainly a problem on stock diamonds. It's primarily caused by the speed at which the phone can access and render the phonecanvas, as well as the playing of a MP3 ringtone.
The low-hanging fruit is to use a [.wav] ringtone which is played natively in WM6. Also, if you're willing to flash a custom ROM, there are several that use optimized dialers (I made one) with better responsiveness. If you search, you'll come across a few:
GenY D2X
GenY D2The incoming call latency used to annoy me, it's why I initially signed up to xda, but it's something I haven't even noticed in quite awhile. I'll attach a [.wav] ringtone for you to try out.
Hello,
it's one strange thing - it happends with all ICS rooms, maybe you know why:
I like setting ringtones fo each contacts. And if phone is in deep sleep, and someone calling me, sometimes default ringtone rings, not custom. But if same contact calling when phone isn't in deep sleep, all ok, ringing custom ringtone witch i set to this contact. Why sometimes phone start ringing default ringtone?
Finalfour said:
Hello,
it's one strange thing - it happends with all ICS rooms, maybe you know why:
I like setting ringtones fo each contacts. And if phone is in deep sleep, and someone calling me, sometimes default ringtone rings, not custom. But if same contact calling when phone isn't in deep sleep, all ok, ringing custom ringtone witch i set to this contact. Why sometimes phone start ringing default ringtone?
Click to expand...
Click to collapse
I have just stumbled across this very problem, posting here to see if anyone can shed some light.
Hi xda,
I have an issue where during a phone call i hear brief moments of silence whilst the receiver hears beeping, this happens around every 15 seconds and the duration of silence lasts around 2 seconds, it takes a good 10 seconds for the call to hang up.
I've checked the head phone Jack it seems clean and can play back audio flawlessly.
Running Pokemon charmeleon rom with franco kernel
Anyone else experiencing this problem?
Sent from my HTC One X using XDA
i dont know the solution to your issue!
trentoid said:
Hi xda,
I have an issue where during a phone call i hear brief moments of silence whilst the receiver hears beeping, this happens around every 15 seconds and the duration of silence lasts around 2 seconds, it takes a good 10 seconds for the call to hang up.
I've checked the head phone Jack it seems clean and can play back audio flawlessly.
Running Pokemon charmeleon rom with franco kernel
Anyone else experiencing this problem?
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
For me sometimes when the headset is connected and I answer a call, there's no sound for a good 10-15 seconds and I keep saying "hello" like a retard and then I can hear the caller.
There is some sort of problem with headset compatibility for sure. Yesterday I was using this voice assistant called Skyvi with the headset attached, and after removing the headset my phone's mic wouldn't work at all! I had to restart to get my phone's mic working.
What I'm saying is there's a problem with headset detection or the software that makes the sound switch from the handset to the headset imo.
Further testing proves that this only happens when dialling out, not when the call Is incoming
Sent from my HTC One X using XDA
Damn strange! It has happened on incoming calls for me for sure.
There was this another "retarded" thing the handsfree did when I first got the phone, on pressing the button(twice) to change the music track playing, it called the last contacted person. I kid you not, I happened to call two people like that. But never happened after that day.
I have the exact same problem with my HOX, I'm thinking it's a hardware issue, because I have tried different kernels (Franco, faux & stock) and different versions of Revolution ROM by Mike... My phones serial number begins with HT23RW...
This is when I use the handset aka. The phone itself without bluetooth or headphones connected...
I have a weird and annoying issue with my 10 (stock 7.0, 2.51.531.32):
During every phone call, after ~1 minute, my microphone seems to cut out for perhaps 10 seconds (as reported by the person at the other end). After that, it works normally again. I just installed "automatic call recorder" so I can start to pin down these numbers precisely.
The microphone(s) pass the HTC hardware tests, and when I use "Voice Recorder" in voice notes mode, it will record for many minutes without any issues. In addition, I don't think this ever happens when I use a Bluetooth headset for calls.
Any suggestions?