I just paired a Sony bluetooth headset (HBH-IS800) with my Tilt 2 and the volume is quite loud when listening to music. I put media player sound volume down to 5%, apparently the lowest, and it's still very loud. The only other option at that point is going down to 0%, obviously too quiet :-|
Also, the main system volume slider on the side - no effect on the headset whatsoever. Whether it's maxed out or silent - the bluetooth headset is still too loud.
Does anyone have any recommendations on:
1) How to go between <5% and >0% volume on media player?
2) How to get the main volume control to affect the bluetooth headset volume?
3) Any other ideas on lowering the music volume overall? Maybe another (better?) music player could work? Maybe a reg setting I can modify?
Any advice is appreciated - the headset is so cool - I'd love to make it usable!!! - TIA!
-Fnortner
P.S. - I called Sony - their answer: "We don't support the headset unless it's paired with a Sony phone". Boo Sony!
I have the same problem with this headset.
I had it running on the Touch HD with volume control from the device works perfectly.
Is there any solution yet?
same volume control issue with BT8040
With both Media Player or PocketTunes, I am not able to alter the volume on the BT8040, either from the Tilt2, or the earpiece itself.
Never had this problem with the same earpiece and my original Tilt.
Same problem here
I have the same problem. I have a bluetooth set which I connect to FM transmiter. The problem is: Volume is all the way up so the music is horrible, it gets distorted. I'd like to know how to manage the bluetooth volume in the system settings, is there a way? Pushing the left buttons (system volume) wont affect bluetooth volume, neither any other volume control within the settings. Any help appreciated.
I have found a solution that works for me. I use Nitrogen Player and you can just turn the equalizer on and change the preamp level to close to the bottom. Works a treat for me.
Code:
Options -> Settings -> Equalizer.
http://code.google.com/p/microfi-nitrogen/
I have a bluetooth stereo headset and when I pair it it tells me that I can not control the volume from the phone.. any way to fix??
dahauss said:
I have a bluetooth stereo headset and when I pair it it tells me that I can not control the volume from the phone.. any way to fix??
Click to expand...
Click to collapse
Same problem to me... I listen often to internet radio, but now it's too loud :-(
Same Problem here...
If anyone came up with a solution for this that works native to the ROM (vs just adjusting the eq) post it here, and I'll do the same.
jon5kr said:
If anyone came up with a solution for this that works native to the ROM (vs just adjusting the eq) post it here, and I'll do the same.
Click to expand...
Click to collapse
I have a stereo BT headset, and whenever I pair it with my (tmo US) TP2, the phone throws up a standard "you have to adjust the volume from the headset, can't do it from the handset" warning...and when I do use the volume controls on the headset, the volume does adjust accordingly, but without any feedback from the phone (no volume slider or other indication), so the adjustment is obviously happening in the headset's circuitry, and the audio coming from the phone is at a static, un-adjustable level.
From the research I've done, the culprit is the sub-par Widcomm bluetooth stack in the phone, and I haven't yet found anyone who has engineered a replacement stack. I know the possibility exists (I upgraded the bluetooth stack on my Wizard a couple of years ago to get one that had the A2DP profile), but I just don't think anybody has made a replacement for this model yet
sirphunkee said:
I have a stereo BT headset, and whenever I pair it with my (tmo US) TP2, the phone throws up a standard "you have to adjust the volume from the headset, can't do it from the handset" warning...and when I do use the volume controls on the headset, the volume does adjust accordingly, but without any feedback from the phone (no volume slider or other indication), so the adjustment is obviously happening in the headset's circuitry, and the audio coming from the phone is at a static, un-adjustable level.
Click to expand...
Click to collapse
Thanks for the reply! My situation is backwards in the sense that the headset doesn't have volume controls - and what I seem to be finding is that there doesn't seem to be an immediate fix for controlling a headset from the phone. I did use a tool called "Advanced Config" to find a default music volume that I can change, so I lowered that from 100 to 50 and now the volume is at least comfortable. However I have no control over it yet....
Could these issues be due to USB 2.0 versus USB 2.1 ?
I got a Motorola H17 (USB 2.1) and everything works perfect. Have volumn control from phone and headset and all audio sources work fine.
Oooops. Meant Bluetooth 2.0 vs Bluetooth 2.1.
jon5kr said:
Thanks for the reply! My situation is backwards in the sense that the headset doesn't have volume controls - and what I seem to be finding is that there doesn't seem to be an immediate fix for controlling a headset from the phone. I did use a tool called "Advanced Config" to find a default music volume that I can change, so I lowered that from 100 to 50 and now the volume is at least comfortable. However I have no control over it yet....
Click to expand...
Click to collapse
Yes, for some reason, the BT stack in this phone seems to assume that all BT stereo headsets also have built-in controls on them and won't allow them to adjust system volume. I think we're probably stuck with that fact until somebody finds a BT stack to replace the TP2's native one.
The best workaround for now may be just to find and use a headset that does have volume controls. I'll be posting a review soon of the ones I have now, the Plantronics/Altec Lansing Backbeat 903's
jonto said:
Could these issues be due to USB 2.0 versus USB 2.1 ?
I got a Motorola H17 (USB 2.1) and everything works perfect. Have volumn control from phone and headset and all audio sources work fine.
Click to expand...
Click to collapse
So when you play music through it, you can control the volume on the handset itself, and with controls on the headset? If so, I'm guessing it's because that's a monaural (not stereo) headset, so it may not be the same volume. My headset has BT 2.1 on it, and while I can control the playback etc on the phone, the volume controls only adjust the headset volume, not the volume on the phone.
sirphunkee said:
So when you play music through it, you can control the volume on the handset itself, and with controls on the headset? If so, I'm guessing it's because that's a monaural (not stereo) headset, so it may not be the same volume. My headset has BT 2.1 on it, and while I can control the playback etc on the phone, the volume controls only adjust the headset volume, not the volume on the phone.
Click to expand...
Click to collapse
This may be true since it is only monaural. The volume control (on the phone) still controls the phone (thus the headset) while the BT control only controls the BT headset.
jonto said:
This may be true since it is only monaural. The volume control (on the phone) still controls the phone (thus the headset) while the BT control only controls the BT headset.
Click to expand...
Click to collapse
Good evening,
If it can help you with tcpmp-0. 72RC1 - GF5500Edition - Alpha4. 1 can adjust the volume of this famous helmet HBH-IS800 and it is easier than with nitrogene.
Good evening
Ichtus
if its is supported by only sony phones(BB storm too) then can we get the profile from a xperia and install it on another device
I have seen multiple people state they can adjust the volume both on their headset and on the handset asystem volume. I thought perhaps it was the BT stack EXCEPT I was able to do this as well before I did a hard reset now I cannot adjust the 2 volume controls independently. The handset volume is static. Will someone that can adjust the system volume with a headset compare settings/egistry entries with me?
Is there a way we can adjust the volume of the line out from the bluetooth connection, anyone, lately ive have noticed that most devices are doing this, dont want to revert to a old stack but there has to be a way to combine the headset volume with the bluetooth volume
I have experienced substantial static noise on my Sprint variant of the Samsung Note 7 when using headphone jack to Aux in my car stereo. The static's volume was substantial and made listening to music unbearable. I was thoroughly disappointed that this brand new phone sounded like garbage, and thinking it was a hardware defect and considered returning the phone. I decided to troubleshoot this problem, and found an odd solution, odd because it seems to be a software issue. So, while my phone was streaming music and producing static while plugged into the Aux car stereo, I jumped into settings and toggled on the 'UHQ upscaler' found in 'sound quality and effects' at bottom of sound settings menu. (( Settings > Sounds > (Advanced) Sound quality and effects > UHQ upscaler )) Toggling this switch immediately got rid of the static issue... even after turning the toggle back to off.
Static / White noise Experience Continued....
So, while listening to static free music via Aux cable to car stereo, a call comes in through phone app, static immediately resumes as phone app takes over sound settings. I answer the call and static continues to come through car speakers obscuring the caller's voice. (no, this is not static from a microphone / speaker feedback loop) So, I unplug aux cord and place phone against ear the old fashion way. When call is about to end, I plug Aux cable back into phone, static resumes until phone call ends (phone app releases control of sound) at which point music resumes playing without static.
Troubleshooting methods tried while figuring out static via Aux cable to car stereo:
- plugging in various Aux Cables ( no effect )
- unplugging charging cable while listening to music ( no effect )
- playing music on Note 7 to home stereo via 3.5mm to RCA cable ( Did not produce static )
- toggling UHQ upscaler (( eliminated static via Aux cable to car stereo after toggling on (or off, after it has first been toggled on), static returned for duration of native phone app call and disappeared after call was over ))
I find this issue to be quite odd, seems like it is some sort of software issue... Is anyone else experiencing this or something similar?
STATIC!!!!!
Edit: After doing some more research found that the galaxy S7 and S7 edge suffer from same problem. Workarounds include toggling UHQ upscaler ( Settings > Sounds > (Advanced) Sound quality and effects > UHQ upscaler ) and/or purchasing a Ground Loop Noise Isolator...
The sound on my note 7 is fing horrible especially on the aux line out, the bass and treble is so muddy. i don't get near the clean volume or loudness like I do out of my note 7 compared to my iPhone 6s even over Bluetooth. I'm wondering if there's a volume protection setting on the note 7 I'm not seeing because even my UE mini boom sounds louder and better over Bluetooth with my iPhone.
Galaxy 8 hissing noise
My Galaxy 8 makes a huge hissing noise when I hook the audio jack to an external speaker with the 3.5mm plug.
Samsung engineers are incompetant.
Samsung brags about all these hundreds of "features" on this $650 phone and THEY CAN'T EVEN GET GOOD AUDIO OUT OF IT.
I have noticed that when either connected to Bluetooth headphones or streaming to my car stereo that I am having to turn the volume up to nearly 90% just to get a reasonable volume.
Any work around for this ?
hpsauce37 said:
I have noticed that when either connected to Bluetooth headphones or streaming to my car stereo that I am having to turn the volume up to nearly 90% just to get a reasonable volume.
Any work around for this ?
Click to expand...
Click to collapse
Yea I have a pair of wireless beatsx, but those headphones are junk anyway. Can not get them "loud". Maybe its the phone/bluetooth..
I noticed the same thing when I first paired the 7t with my car's BT. I don't consider it a problem because all I had to do was raise the volume on the car radio, and it remembered the setting. But I'm only listening to navigation prompts and voice phone calls. I haven't tried it with music.
Anyone solved this problem?
While using headphones or any audio-bt devices connected to oneplus 7t i can get only around 70-80% of max device volume.
My bluetooth can get painfully loud on any system... Are you sure you are not facing to sets of volume controls?
Some "dumb" headphones / speakers just have one output volume and you control loudness via the phone volume. Others have their own volume processing (like a car stereo). If you max out your phone volume then you can control the loudness via the stereo.
Numerous times I've been in the car and can't figure out why I need to turn the stereo volume up so high only to realize I've bumped the phone volume to a low setting.