Related
I follow instruction in http://forum.xda-developers.com/showthread.php?t=313486 but after hardreset.
My p800w is stuck in T-Mobile logo and version number. It can't continue booting up to windows mobile.
Question: How to flash ROM without ActiveSync?
How to recovery my Artemis?
Welcome any advice,
Thanks in advance.
Yea me to, mine is now a brick after that upgrade? No active sync connection possible and all I get now is the blue O2 start screen after the hard reset with the red writing and numbers in the top left hand corner..
Phone is an UK XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
HELP!!!!!!!
yeah, I had the same problem and have created a thread for it already. unfortunately I got no useful replies, and it seems that I am stuck waiting for an official o2 ROM so that I can recover my Orbit.
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
motomob said:
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
Click to expand...
Click to collapse
I read in here that you hold the voice button and soft reset.
Decaf said:
I read in here that you hold the voice button and soft reset.
Click to expand...
Click to collapse
Correct and use mtty
Already see in the forum ....
Thanks guys and apologies for the spelling..I ran the Artemis_USPL before I tried upgrading to WM6 and again have been able to run it after with my new brick now with the phone in bootloader mode but still when I try and run the german ROM update a) it will only work with the german file which freezes @ 3%? This seems to be a known problem reading around and b )when I replace it with the smaller ROM file, 54MB the german one is 66MB, I originally tried to use it doesn't read the ROM file or the update utility doesn't want to read it. I reckon I might be able to get it back if I can get one of the ROM update utilities to read a good ROm file and send it to the phone.
I can;t find this MTTY program to sniff the USB port and return the code of if the USPL util wokred as I think that could be key to all of this.
Can anyone post a quick how to here for
1) install MTTY from somewhere
2) what command to run agaist the phoen to see if the USPL util worked and what values I should be looking for
3) another WM6 ROM version (that the update utils can read) download location I can download from to try and send to the phone using the German update util
Not asking for much am I but I desperately need my phone back WM5 or 6 in the next day or so so really can't send it off.
Thanks
Error message I recive at the 3% stage when using the German ROM and english update util.
use the file attach and read that :
http://forum.xda-developers.com/showthread.php?t=285112
Thanks but I'm not that cleud up on what commands I'm meant to be sending. It works in Bootloader mode I ge a response from the phone by send it a command. But even if I get a response telling me what the CID status is its not much help as I think ti shoudl have tekane BEBEs ROM by now as I've got the german ROMUpdateUtility sending that 54,272KB file to the phone but it stops after 3%. What are my options?
motomob said:
But even if I get a response telling me what the CID status is its not much help as I think
Click to expand...
Click to collapse
That's right. On older models MTTY was quite useful, but not on the Artemis. You cannot use it to read the CID status anyway. If you are not sure about the status, run the USPL tool, just to make sure.
I've already re run the USPL ROMUpdateUtility and it completes 100% okay in bootloader mode. But after I hard reset and then try and flash the WM6 BEBE ROM or any ROM German etc back onto it it either fails with the error code I posted up earlier or gets to 3% and fails.
What are my options at this stage? Does anyone have a link to another ROM I can try like the original WM5 O2 ROM or any other WM6 ROm that might work. I'm willing to give them all a try as it's just a useless phone right now and I haven;t sent it off as 1) I need it before the weekend and 2) As I can flash some ROMs with the USPL and others have done this no problem I really feel there must be a solution as I can still falsh the phone.
What can I say RTFM... I did it all right and I didn't have a brick, I missed out one small detail... loading on the ROM with the extended ROM. All now running and it does seem a little faster than WM5.
Thank you to all those that tried to help out. To the others that are still having probs.. Don't try and run the update in the middle of a busy day in the office whilst trying to manage 100 other things meaning you are probably missing out a line like me...
One question though how do I get back my O2 power and storage meters on the today screen back as I liked them and the WiFi seems to have a bug where when it is enabled and you click on the WiFi symbol up the top it only allows you to switch it on, when it is already on.. so you have to open up the COMM manager to switch it off.
So how did you fix it exactly? I have read this thread thoroughly and can't find out what you did!
ERROR[206] occurs while trying to update ROM to WM6
While tring to update ROM to WM6 on O2 XDA Orbit i encounter ERROR[206].
I wanted to attach the screen shot but dont know how to do that, but anyway what i am doing is i attached my pda to my pc via activesync using supplied usb cord. Everything goes well till i reach a screen where it says "You are now ready to update your ROM image...." and once i click next a progress bar apperas and my pda shuts and activesync exit's automatically and my pda tries to restart with RBG band and some text:RUU, IPL 1.25.0001, SPL 1.25.0000 and USB. And thats it after few seconds or a min i get the ERROR[206] and my pda hangs.
I dont know why Activesysn shutsdown ???
Just an additional in i want to tell that without installing activesync i am not able to connect/pair my pda with my pc. So do i need to install the drivers and then try or it doen't matter cause once i install Active sync i can connect the device.
Please help me with this....
Thanks
unable to load bootloader!!!!!!!!!!!!
HELP!!!!!!!!
I have HTC3300, tried to update rom, now its bricked. I tried to start bootloader by pressing the voicebutton and softreset but loads in t-mobile screen and hangs, im unable to start the bootloader.
Is this end of story or are there any other options to get the bootloader to start????
please help
Bootloader
I had a problem with my phone loaded touch flow 4 and cid unlocking, everything was fine then after a while it froze at boot up.
I look put the battery and did a hard reset, put it into bootloadeder mode, reflashed with a t-mobile rom does not need to be cid unlocked to do that.
Once origonal rom was working, cid unlock again, flashed back to touchflow 4.0 - sorted
Where did you got an tmobile rom from can you tell me. Mine is also freezing on booting almost once every day or so after I've upgraded to 4.0
HI all,
yesterday my Orbit crashed. Whenever i try to turn it on, it gets stuck, and only shows the first 2 lines when loading, and does not show the GSM version and OS version, I tried to do a hard reset, nothing helps, it just keep stucking on the 1st screen with the first 2 red lines.
Anyone any ideas ???
Thanks
Worth a Try
You might just have a go at putting it into bootloader mode and flashing with a new or the same ROM.
I wouldn't like to suggest it would definitely work, but it'd be worth a go.
How do i do that ?
When in doesnt recognize a connection ?
igal said:
When in doesnt recognize a connection ?
Click to expand...
Click to collapse
It may be able to make a connection in bootloader mode. Like I say, it may not work, but have you tried it? Have you got a better idea?
igal instructions how to go into bootloader mode are in the first thread of the forum. You dont need an activesync connection just connect via usb.
As Mark has said above Activesync connection is not required for "connection" Bootloader mode activates a USB connection which allow ROM flashing.
Use an official O2 Rom or similar, which AFAIK does not require USPL'd ?
Check this thread, which succesfully fixed my bricked Orbit, Remember your on your own though, but if it is knackered now it can't get worse....
My instructions use the official German Rom to get it back up and running, as the English version had not been released. Once you get back up and running you can use any of the other cooked ROMS that are about.
http://forum.xda-developers.com/showthread.php?t=312495
DISREGARD the bit about WINRAR, just get an official ROM, stick your handset in bootloader mode and run ROMupdateUtility.exe
Report back on how you get on.....
I went in to..
Bootloader mode. and got the RGB screen with usb connection, but when i try to flash ( both the rom im using now B&B 4.1 and also an official ROM by O2 ), it quits after 3% altough i have a CID unlcoked by imei-check, and i flashed like 10 times before...
any ideas ??
Thanks!
You must use the factory rom specific to your device including language - did you?
Yes i did.
Not working....
Hi Igal,
which rom eaxctly did you try to flash with to rescue your Artemis from the bootloader?
Rgs
Cyber
I used O2's rom
I downloaded the official rom of O2 ( Windows Mobile 6 ). Once it told me "Invalid Vendor" and the other time " Image corrupted " ( I have O2 XDA ORBIT ).
Are you in the uk using a rom from 02 UK?
I had a similar problem like you are having and managed to rescue using the HTC WM5 standard rom.
Im not in the UK, But
The phone is a UK one, and i tried to rescue it with wm6 official rom, Do you think i should try with wm5 ? Where do i get it ?
igal said:
The phone is a UK one, and i tried to rescue it with wm6 official rom, Do you think i should try with wm5 ? Where do i get it ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=318696&highlight=mobile+5
I have Dhva_ddt V20 installed....
I tried to install omnia slm/touch player...During installation it got hanged...
I did soft reset but after reset it got hanged on splash screen...
After that i tried to falsh new rom by SD card method.. but not sucessful..
It shows IPL / SPL and "serial" at bottom on bootloader...
I tried to connect it to pC here it shows USB at bootom at bootloader but gives an error..."Use new version of RUU"... don't know what to do?
I am trieng from two days and read a lot but noting help...
alex8525 said:
I have Dhva_ddt V20 installed....
I tried to install omnia slm/touch player...During installation it got hanged...
I did soft reset but after reset it got hanged on splash screen...
After that i tried to falsh new rom by SD card method.. but not sucessful..
It shows IPL / SPL and "serial" at bottom on bootloader...
I tried to connect it to pC here it shows USB at bootom at bootloader but gives an error..."Use new version of RUU"... don't know what to do?
I am trieng from two days and read a lot but noting help...
Click to expand...
Click to collapse
downloaded the newest hardspl and flash that, if that doesn't work download the newest shipped from for your phone from the wiki.
here is hardSPL
and here are the shipped roms
or official AT&T rom with radio stripped out (safer)
Tried ATT rom..But it didn't work
alex8525 said:
Tried ATT rom..But it didn't work
Click to expand...
Click to collapse
Then try your official rom. (I put the custom RRU with the striped one).
Should work. If you can get into bootloader tisnt a perma brick.
also see this thread here, looks like the guy solved a problem like yours
alex8525 said:
Tried ATT rom..But it didn't work
Click to expand...
Click to collapse
Try flashing with SD card! Read through wiki to figure out how to flash through SD card.
I have tried SD card method...
But it shows bootloader with IPL / SPL version and "Serial" at bottom...
It dose't load any thing...
I have tried installing ATT official rom also.. but it says use updeted utility to flash....
I am able to go to bootloader and get USB connection when connect to PC....
But I don't have Activesync installe on PC is it a problem??? and I can't install active sync because of some restriction....
How to come out of this?
Is there any way I can Hard reset phone? Without switch on it?
Please help ...M scared....
I have done hard reset and now I m stuck at white screen .....
Is it bricked?
alex8525 said:
I have done hard reset and now I m stuck at white screen .....
Is it bricked?
Click to expand...
Click to collapse
ok, can you get into boot loader, press ok on left, and power on on right, and stick your stylus at the bottom, all together. Plug USB to PC, with boot loader screen, download the ATT rom mentioned here, and start the process. You have to have activesync 4.5 and .net 2.0 on your PC to have this to work.
Also, you have been given a link above for the official ATT without Radio, and here is the exact instructions on how to flash via SD. what part of any of these do you not understand?
Why would you perform a hard reset right after asking about it and not even waiting for an answer? If you had any doubts you should have just waited. I don't know much about your problem but I would't be taking the chance of doing something I wasn't sure about thats for sure. I really hope you can get out of this mess.
what size micro sd have u got. if it is larger than 2 or its a sdhc than you will not be able to flash sd method.
download another recent rom or just reflash the same dvha rom and do it through active sync on pc.
Finally got it working...
After 3 hard reset now I am out of white screen and now its working.
After 3 days
1. on splash screen
2. on bootloader
3. on white screen
Thank you everyone who have replied and who have atleast viewed.
learning:
Activesync is must for flashin through PC
new way to hard reset (thx wiki)
don't panic...your phone will be working sooner or later, if it was not a flshing that hanged it.
by d way i am posting from phone
alex8525 said:
Finally got it working...
After 3 hard reset now I am out of white screen and now its working.
After 3 days
1. on splash screen
2. on bootloader
3. on white screen
Thank you everyone who have replied and who have atleast viewed.
learning:
Activesync is must for flashin through PC
new way to hard reset (thx wiki)
don't panic...your phone will be working sooner or later, if it was not a flshing that hanged it.
by d way i am posting from phone
Click to expand...
Click to collapse
Glad to here you fixed it!
HTC TyTN II
KAIS130
SPL-1.98.0000
CPLD-8
I have eclair installed and several Radio related thinks, like sound wont work.
I am trying to go back to WM6.1 from HTC.
I tried KAISIMG.nbh installs from SDCard but nothing works.
I tried Radios WM6.1 and WM6.5
I always get stuck at a white screen witch says "Loading..."
What else can I do?
I believe your problem is same with mine
I'm not sure myself but I guess it gets stuck in loading because there are no hard SPL installed anymore.
it says that you got SPL-1.98.0000.... not a hard one isn't it?
If I'm not mistaken, SD install only works with hard SPL.
but we should be able to flash a stock rom via usb cable.
prompt your bootloader -> connect via usb cable -> flash your stock rom
but i have tried 2 rom which is
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
and RUU_Kaiser_HTC_WWE_3.02.405.0_radio_sign_25.70.30.05_1.58.26.20
none of them works.. always stuck at 1 % of the process and gives me error notification [294] : invalid vender ID.
well, I hope this could give a little help for you
good luck..
gruessle said:
HTC TyTN II
KAIS130
SPL-1.98.0000
CPLD-8
I have eclair installed and several Radio related thinks, like sound wont work.
I am trying to go back to WM6.1 from HTC.
I tried KAISIMG.nbh installs from SDCard but nothing works.
I tried Radios WM6.1 and WM6.5
I always get stuck at a white screen witch says "Loading..."
What else can I do?
Click to expand...
Click to collapse
1. take out sim card
2. remove SD card
3. hold down camera and power button (boot tri-color screen)
4. plug in USB cable to phone after tri-color screen
5. update phone with winmo rom using RUU.
qqdawg said:
1. take out sim card
2. remove SD card
3. hold down camera and power button (boot tri-color screen)
4. plug in USB cable to phone after tri-color screen
5. update phone with winmo rom using RUU.
Click to expand...
Click to collapse
still doesn't works for me.. the method is exacly what you said.
this is the 3rd rom I tried to install today
RUU_Kaiser_DOPODASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
but still the process end at 1% with error notification [294].
what winmo rom did you use? or should I try to flash a non-stock rom?
-Rif- said:
still doesn't works for me.. the method is exacly what you said.
this is the 3rd rom I tried to install today
RUU_Kaiser_DOPODASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
but still the process end at 1% with error notification [294].
what winmo rom did you use? or should I try to flash a non-stock rom?
Click to expand...
Click to collapse
The stock ROM I use is : RUU_Kaiser_WM6.1_ASIA_WWE_3.10.707.1.YK_Test
-Rif- said:
still doesn't works for me.. the method is exacly what you said.
this is the 3rd rom I tried to install today
RUU_Kaiser_DOPODASIA_WWE_3.29.707.0_radio_sign_25.83.40.02_1.65.16.25_Ship.exe
but still the process end at 1% with error notification [294].
what winmo rom did you use? or should I try to flash a non-stock rom?
Click to expand...
Click to collapse
Always use stock ROM when in doubt.
I am trying to flash my PDA with a new ROM, While working with HardSPL everything gonna alright, But during updating Radio or ROM i got a message Error with [ Error 262] unable to communicate, please help me
Error screen short attached
Try to flash when the phone is in bootloader mode
To enable bootloader mode hold volume down when the phone is off
or soft reset then hold volume down,you will see a tri-colour screen,that's normal
then connect to the pc and flash,this should solve
Hi, get the same Error.
Using the O2 XDA Diam300 HTC Touch Diamond Handy.
If got 20 (!) rom´s, no one runs on my Handy.
Anyone a idea?
xburnsidex said:
Hi, get the same Error.
Using the O2 XDA Diam300 HTC Touch Diamond Handy.
If got 20 (!) rom´s, no one runs on my Handy.
Anyone a idea?
Click to expand...
Click to collapse
you got HSPL installed, right?
How can watch it, if i got HSPL?
Okay... must install with mtty...
k
****
i´ve got a Brick... damn
how can i start the Ruu in the "tri-color" mode?
I think the RUU need the Active Sync..
Help...........
Problem resolved!
I've not any idea what happened but now i am able to flash my phone with any ROM. If i am not going wrong i think my phone was security restricted to install third party ROM, just HSPL with again and my problem resolved. Thank for support.
hold volume down and softreset! then with usb cable connected run the ruu file