Settings & Comms Manager Colour Icons - Touch HD Themes and Apps

Hi there
Have been searching for Settings & Comms Manager Colour Icons compatible with Sense 2.5 (as I previously used Brent G's SettingsIcons.cab & CommsIcons.cab when running Sense 2.1).
Does anyone know if these will work with the later version of Manila and if not where I can find some good alternatives?
Thanks in advance
Balders

Hello . in the diamond 2 is a cab , work fine
my english is very bad

http://forum.xda-developers.com/showthread.php?t=625292 , look here

izalcoman said:
http://forum.xda-developers.com/showthread.php?t=625292 , look here
Click to expand...
Click to collapse
Hi izalcoman
Many thanks for that. I am running 2.5.20113030.0 and from what I read in the thread you have provided the .CAB should do the trick. I will give it a try.
Do you happen to have, by any chance, something up your sleeve re. the Comm Manager icons?
Regards
Balders

Colored HTC Comm Manager + 11 Buttons
This one works great on mine.
Thanks to bnm7bnm!
http://forum.xda-developers.com/showthread.php?t=536466

Related

Dialpad Skins Install

I have found a realy great pack with Dialpad Skins buth i whant to be sure i can install this on B&B4.3 rom ? And if it possible buth i dont like it is there any change to uninstall it ? Thnx
Diaplad Pack: http://www.zombienexus.net/portal/GL_Display.asp?SEC=3&EntryID=513
but it has video call? p3300 doesnt have video calling?
Default Dial Pad
To get this dialpad working you don't have to install a cab - it's the wm6 default dialer. Just change this regvalue and soft reset:
HKEY_LOCAL_MACHINE\Security\Phone\Skin\Enabled = 0
ok thnx for your support
Can anyone tell me of the dialpads from the link below will work on Artemis with th 30.07.90 Radio rom ? Thnx
http://www.zombienexus.net/portal/GL_Display.asp?SEC=3&EntryID=512
500 vieuws and 1 reply, great
Come on my friend. Your answer is one click away from the page that you gave the link. Look on the left on Which dialpad for you?
Don 't be so lazy. That 's why nobody gave you an answer.
freco said:
Come on my friend. Your answer is one click away from the page that you gave the link. Look on the left on Which dialpad for you?
Don 't be so lazy. That 's why nobody gave you an answer.
Click to expand...
Click to collapse
I also have seen that dude, i just whant to be sure that it works with the latest radio rom. Because the Iphone dialpad have problems with latest radio rom.
NP9660 said:
Because the Iphone dialpad have problems with latest radio rom.
Click to expand...
Click to collapse
somehow i can't believe that it makes difference which Radio you're using.
When you take a look into these cab-files, there are just bitmaps and gif-images
and a lot of registrykeys pointing to these pictures and setting colors. So why should it affect to Radio ROM ? IMO they're working without any issues...

Software Wanted

Hi all
Does anyone have a program or know where I can get one from so that I can turn Wi-Fi on/off with the touch of 1 icon from a shortcut in the launcher tab, I have got 1 that allows me to do this with Bluetooth but I cant find 1 that will do it for Wi-Fi, I cant create one from windows so at the moment I keep having to go to comms and then from there.
Many thanks
Jon
Hi JPW, hi use this little app and works really good! Please let me know if it work for you...
Bye,
Fili
Where did you get the one for BLUETOOTH ?
I am searching for it ...
Thanks
casascha said:
Where did you get the one for BLUETOOTH ?
I am searching for it ...
Thanks
Click to expand...
Click to collapse
Hey thanks for that - works really well and nice little icon too
have attatched the bluetooth cab I use - cant remember where I got it from but its good.
jon
Thanks a lot ...
Yet how do you get it in the Windows Startlist or the Program Tab ?
hi just install the cab and sft reset
you should get a shortcut in the programs list just add it to your touchflow progs
regards
jon
JPW said:
hi just install the cab and sft reset
you should get a shortcut in the programs list just add it to your touchflow progs
regards
jon
Click to expand...
Click to collapse
Thanks it worked ...
Thanks for sharing....these might come in handy!

Get background for all tabs with itje's 5.xx

Since I installed itje's 5.xx rom I have been looking for a way to put a background for all tabs, but evrth I install would mess up something else (the clock), or even worse it would work but in portrait it'd be zoomed in, and after lots of trial and error I finally reached the best combo.....
What I did was that first I installed " Plain HD TF3D " and then " mUn bg4allTabs_stockLike_v1"...
this is nth gr8 but i hope this will help anybody out !!
let me know if it works !
Edit: If anybody thinks this thread is useless plz remove it
and i take no credit for the files uploaded all thnx go to those who developed this great apps !
Very nice, I tried it and it works. Now I have nice backgrounds in all stock tabs,
btw does the ultimate version work?
Mun_rus' original post
http://forum.xda-developers.com/showpost.php?p=3273729&postcount=1
I didn't try that out because I prefer having the background only in the tabs.....you could try that out and if it works share it with everyone
I'm happy this helped someone out
reallylame said:
Very nice, I tried it and it works. Now I have nice backgrounds in all stock tabs,
btw does the ultimate version work?
Mun_rus' original post
http://forum.xda-developers.com/showpost.php?p=3273729&postcount=1
Click to expand...
Click to collapse
Yes, ultimate works well. Very bling bling.
Tried it and looks nice but stops the new style HTC start menu from working!
Anyone found a workaround, would really like them both.
Im too. When I install it, I have a nice background, I really like it. But start menu not work. Who can helf me? thank a lot!
here try this cab....it'll restore the old style start menu
on a personal note though my experience taught me that bg4all tabs slows down tf3d....so the best idea would be to learn making your own manila bg,,,or post the bg you want to have here and i'll see what i can do (specify your rom)!!
darkhalf520 said:
here try this cab....it'll restore the old style start menu
on a personal note though my experience taught me that bg4all tabs slows down tf3d....so the best idea would be to learn making your own manila bg,,,or post the bg you want to have here and i'll see what i can do (specify your rom)!!
Click to expand...
Click to collapse
Thank for your helf. But Im still want use back ground all tab. Could you helf me. What will I do for start menu still work well in itje's 7.1 Room?
staythesame said:
Thank for your helf. But Im still want use back ground all tab. Could you helf me. What will I do for start menu still work well in itje's 7.1 Room?
Click to expand...
Click to collapse
I just told ya .....install the cab i attached in the post above yours !
let me know if it works
darkhalf520 said:
I just told ya .....install the cab i attached in the post above yours !
let me know if it works
Click to expand...
Click to collapse
Thank u! But when I install two *.cab above, all background ok. But when I klich in start menu it don't work ( I used start menu of Touch-IT v7)).
restart your device....you will get the normal "old" start menu
For Touch-It V7.0 USERS:
install only mUn bg4allTabs_stockLike_v1.cab
its works fine by me!!!
And my general advice ramains ....LEARN TO MAKE YOUR OWN BACKGROUND WITH MANILA EDITORS !!!
really i can't emphasize how better this is ....much much faster !!!
londa88 said:
For Touch-It V7 USERS:
install only mUn bg4allTabs_stockLike_v1.cab
its works fine by me!!!
Click to expand...
Click to collapse
I install mUn bg4allTabs_stockLike_v1.cab, restart. But when I click to start menu, not activities, I can't see new menu or old menu.
When I unstall (remove) mUn bg4allTabs_stockLike_v1.cab. I can use start menu (new menu - as basic 7.1 Room). But when I click to messages tab in touchflo3d, I can't opent my messages and, then touchflo3d have some error. restart touchflo3d or dont open.
Thank your helf. But I think this cab not suitable with my X1. I should re-up and content use itje's basic 7.1 room
I want their ringtones too someone help me pleasee.
staythesame said:
I install mUn bg4allTabs_stockLike_v1.cab, restart. But when I click to start menu, not activities, I can't see new menu or old menu.
When I unstall (remove) mUn bg4allTabs_stockLike_v1.cab. I can use start menu (new menu - as basic 7.1 Room). But when I click to messages tab in touchflo3d, I can't opent my messages and, then touchflo3d have some error. restart touchflo3d or dont open.
Thank your helf. But I think this cab not suitable with my X1. I should re-up and content use itje's basic 7.1 room
Click to expand...
Click to collapse
About the messages tab, it has nothing to do with this cab. You can find the fix on itje's Touch-IT v7 thread on page 40.
does anybody know where itje got his background in the 5er series of his touch-it rom? Want this floral background back
DonGeilo.....here is it .....just extract these 4 file in windows directory using total commander.....let me know
nope...get the standard background thats in the rom...
try restarting your phone !

Manila Theme from Dutty 2.7?

Hello dudes!
A friend showed me his BlackStone with the Dutty 2.7 Rom, and he has a new theme for manila. He told me that's the official from Rhodium.
A blue one with a new clock.
Where can I find it?
Thanks.
http://xboxmod.totalgamer.org/release/xbmod TMOBILE SKIN.cab
Think you talking about this one
Maybe, but the link doesn't work .
Tatou26 said:
Maybe, but the link doesn't work .
Click to expand...
Click to collapse
Hehe doesn't work here also
Still nothing?
like my rom here for x1?
http://forum.xda-developers.com/showthread.php?t=498019
itje said:
like my rom here for x1?
http://forum.xda-developers.com/showthread.php?t=498019
Click to expand...
Click to collapse
Yes exactly.
This is the one .
Is there a way to install it?
Ooops I should try the link frist
Here you go
http://rapidshare.com/files/226496316/xbmod_TMOBILE_SKIN.cab
Thanks VIPPER, It works fine.
I really like this theme.
Glad i could help, its was courtesy of xboxmod back at Rhodium VGA port Project
http://forum.xda-developers.com/showthread.php?t=493531
On my HD, the cab only installs a new slider and changes the color of the highlight when i select the TF3D clock. It also made the 1st, 3rd and 4th digits appear white on the default white clock. Is this how it is supposed to be?

Background on all tabs? TouchFLO 3d 2.1.38411.0

Hi iv been looking around as id like all my backgrounds the same image but when i apply the tweaks that a few people are saying it distorts my whole touch flo program and crashes it why is this happning are the tweaks only ment for 2.5?
I would like to know that too. IS there a chance to have the same background on all Tabs?
Background For all Cabs for touch flo 2.1
Here is a cab which i found which worked for me on touch flo 2.1. Hope it works.
thx i'll try it
edit: I have tried it on manilla 2.5, but nothing happens. I mean how to run it after I install cab. NOw I am flashing a new rom with manilla 2.1 to see if it will work. But glad to see, that such a tool exists. If you can provide more info about this tool
I recommend trying HDWalls can be found in the forum with a search, this works perfectly on my manila 2.1, very easy to use as well, I make all my wallpapers with it, excellent app.
cheers
Cool thanks for the feed back there the reason i know it does work was i managed to download a cab a while ago and right enouth it worked but i though ill get fly and try a few other cabs but unfortunutly they must be version dependent,
i know the method of over wrighting 2 windows files i tryed to look through my windows enabling hiden files but could not find the 2 files listed on most topics,
ill try your update thanks alot for the feedback,
Thanks
Brilliant cheers badbrowne this sorted the issue it is working perfect all tabs running my main tab image that was simple could not find this answer,
This should be added to the sticky part thats a great saves me from having to hard reset,
how did it work for you? or is it simple but you just have to have manila 2.1 ? only needs to run this cab file and that should be it? thx
Yea
I just downloaded the cab posted sent it to my device insatlled it to my storage device not the external memory and restarted my touch hd make sure your fone is the stated resalution though or this may end up destorting your tf3d theme, if you have the wrong screen type,
yes with the new flashed rom using manila 2.1. It all went good. Very happy now. Thank you all
This does not work on weather clock versions.
Works for me..
gr8 work, thanks a lot..
Ty ty ty ty
does not work on tf3d 1.2 but greatly works on my tf3d 2.1
thanks a lot dude ^_^
I just noticed the home page slider is transparent while the slider on other tabs remains

Categories

Resources