htc arte300 stuck in first logo after use artemis uspl tools. - P3300, MDA Compact III ROM Development

I use cid unlocker to upgrade my arte300 to wm6 new rom..
after this phone stuck in htc logo.
i use original rom to downgrade it to first time! but every time get vender id error or incorrect image file and error in 2% progress..
i dont know whats the country id and rom version before flashing!
i get this info from mtty tools.
HTCSFHTCE
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>ruurun 0
Cmd>getdevinfo
HTCSARTE30000q¨ÿÙHTCE
Cmd>resetDevice
Invalid command : resetDevice
For a help screen, use command ? or h
Cmd>ResetDevice
what was doing for this time?please guide me !

Anybody Dont decided to help me for repair this problem?!

u have tried wrong uspl & still it is not unlocked visit hear for more information
http://forum.xda-developers.com/showthread.php?t=308242
NOTE : If you try to recover by mtty then you should not copy paste code, just type that code ... finally it must be restart
Hear is the solution just follow guide with carefully
1. Launch ActiveSync on PC
2. Go to connection settings
3. Uncheck the Allow USB Connection
4. bring the device to bootloader.
5. Connect device through USB
6. Now, run mtty .
7. Run mtty.exe, You will se a box showing "COM1" from this list select "USB" -
8: Leave default parameters, (8 bits / Flow Control NONE / Stop bits 1 / Parity None / Local Echo No) and Click OK
9. Enter (it shows cmd>)
NOTE: Dont copy paste below code just type as it is with carefulley
password BsaD5SeoA ( Press enter from key board of computer )
ruurun 0 ( Press enter from key board of computer )
getdevinfo ( Press enter from key board of computer )
ResetDevice ( Press enter from key board of computer )
i think u have made mistaken at the last stage ResetDevice because u have entered r small letter resetDevice
Good Luck Buddy....

Thank you so much dear friend..
i use this command correctly and get this info!
password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>ruurun 0
Cmd>getdevinfo
HTCSARTE30000q¨ÿÙHTCE
Cmd>ResetDevice
what was doing now?
How i fined right rom?
im from iran.. witch rom is suitable for this phone?

buddy, if u follow above steps it must restart, at last ResetDevice & give enter

Also reset the phone with this command...
what was doing now?
how solve this problem?

iam not getting you, tell me what exactly the problem you are facing, what exactly the phone status, is it realy stuck at boot screen still...?

Related

Unable to flash S620 with signed .nb0 file

Hello guys!
I've got S620 unlocked by imei-check.co.uk. Currently with official HTC WM6 English rom onboard.
I have a signed .nb0 file (49mb).
Trying to flash -> get multiply errors.
I press 'camera' button, connect USB cable. USB is disabled in activesync.
MTTY screen is the following:
Cmd>set 32
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
***** user area size = 0x7940000 Bytes
SDInit---
SDInit OK
g_cKeyCardSecurityLevel = 0
Cmd>lnbs flash.nb0
clean up the image temp buffer at 0x8C080000 Length 0x03900000
MTTYDownloadImage "flash.nb0"
:F=flash.nb0
start download
S
HAddress A0000000h Length 0310659Eh
Start Address out of boundary
checking image header
---------------------
It seems i should enter 'right' bootloader start address after "lnbs flash.nb0" command - any clues, how to find it?
And one more question: why when i enter "lnbms" command i receive unknown command in return?
Thanks,
Alexey

Gene j-tag problem need help

I flash my gene whit an oficial rom and i block the CID . now i try to jtag but my pc dont detect the divice when i ty to configure the hjtag program ghive this error see pic.
i made the interface, i start the divice (onli start whit batery) if i remove the batery pack will not start onli whit lpt interface (it is normal?) or it must start in bootloder on lpt interface no batery need?see pics:
Plz help me i dont know what to doo?
i try mtty end this is show:
set 32 1
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF
Cmd>ls boot.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Plz help whit jtag!
Sorry for my enghlish!
same with me also,
please anybody help us..
Hi, miluxtremenet,
can you send me the photographs of the j-tag connections that you have made. Please send the clear photographs or else the connection diagram. I will be thankful to you.
My email id [email protected]

How to flash the HTC Artemis P3300 Movistar

Hi all,
When i run mtty and command : password BsaD5SeoA from Boot-loader I have this message error :
CMD55 failed
GetDeviceCID: Error - InitDecoder
How can I solve my problem
Another thing I have access to my HTC only with Boot-loader
See all information :
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST

Artemis stuck at bootloader - help to recover please

Hi
I've picked up a second hand Artemis. Unlocked it from T mobile and run USPL. When flashing the Andrew82 WM6.1 ROM, it has rebooted, but now sits at the white TMobile start screen displaying:
IPL 1.13.0001
SPL 1.13.0000
GSM 02.49.90
OS 3.15.0.0
It won't see activsync so I can't reflash the rom.
It will load to bootloader but I don't know what to do next to recover it.
A hard reset only returns to the T mobile start screen.
I have copies of mtty, terratty available, and have downloaded the T Mobile rom ART_TMOUK_11311001_024990_WWE_Ship_R3.exe.
How do I get the rom onto the phone?
Help would be appreciated.
Thanks
...
Cmd>password BsaD5SeoA
Cmd>runruu 1
this should flash..
flash original rom, uspl did ot work!
spl = 1.11.cmon
or
spl = 1.11.0000
click uspl on my sig to download spl 1.11.cmon.. this flashes no matter the rom size..
pm me if you get stuck..
Thanks for the prompt reply.
I've set the phone to bootloader, started Mtty (with activesync set to no usb), and opened the mtty process.
Entering password BsaD5SeoA
I get
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = 0
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
When I enter runruu 1
I get
Invalid command : runruu 1
Any Ideas ?
Thanks
...
shubbie said:
Thanks for the prompt reply.
I've set the phone to bootloader, started Mtty (with activesync set to no usb), and opened the mtty process.
Entering password BsaD5SeoA
I get
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = 0
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
When I enter runruu 1
I get
Invalid command : runruu 1
Any Ideas ?
Thanks
Click to expand...
Click to collapse
Cmd>runruu 1
Sorry, no joy.
but at Cmd>runrru1
mtty returned, invalid command.
The phone is now a grey screen with a loading bar showing, but stuck at 0%.
PM me if will make things quicker, from my end XDA is running very slow at the moment. (probelbly decause I'm in darkest Lincolnshire !)
Sorry, no joy.
but at Cmd>runrru1
mtty returned, invalid command.
The phone is now a grey screen with a loading bar showing, but stuck at 0%.
PM me if will make things quicker, from my end XDA is running very slow at the moment. (probebly because I'm in darkest Lincolnshire !)
...
shubbie said:
Sorry, no joy.
but at Cmd>runrru1
mtty returned, invalid command.
The phone is now a grey screen with a loading bar showing, but stuck at 0%.
PM me if will make things quicker, from my end XDA is running very slow at the moment. (probebly because I'm in darkest Lincolnshire !)
Click to expand...
Click to collapse
try
Cmd>runnruu0
Cmd>ResetDevice
...
shubbie said:
Sorry, no joy.
but at Cmd>runrru1
mtty returned, invalid command.
The phone is now a grey screen with a loading bar showing, but stuck at 0%.
PM me if will make things quicker, from my end XDA is running very slow at the moment. (probebly because I'm in darkest Lincolnshire !)
Click to expand...
Click to collapse
run the ruu
Thanks
runruu0 reported as invalid command as well.
DeviceReset rebooted the phone, and it now boots to the bootloader screen, and nothing else.
when you say "run ruu" do you mean the rom update utility? As this doesn't work as it says the phone is not connected.
All fixed !
Great thanks to raving_nanza - he really helped me out with great advice.
Finally solved by flashed the t mobile original rom via the RUU with activesync set to no usb. Flashing from SD card not successful, but back up and running now.
Now I can get back to the reall target, flashing to WM 6.1 !!
...
glad to help dude..
when you do uspl make sure you spl is
1.11.cmon
if it aint that then you might brick again..
click uspl 1.11.cmon on my signature to download
i suggest the rom too
good luck
...
im gona do a dump of all my stuff (cabs, roms etc) for artemis on 4shared.. ill send you the link when its done dude..

HTC P3300(ARTE300) only bootloader mode come

Cmd>set 32 0
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF
HTCE
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>getdevinfo
HTCSARTE30000q¨ÿÙHTCE
Cmd>
here is info my phone
P/N 99HCV036-00
IMEI 353404017810570
S/N DP847FX00034 B
bootloader mode
IPL 3.17.0001
SPL 3.17.0000

Categories

Resources