Cannot receive files through Bluetooth - P3300, MDA Compact III ROM Development

Hi all
I can send file but I am not able to receive file via Bluetooth. I have did lots of troubleshooting also installed various software for instance ObexInboz etc etc. Any help would be highly appreicated.
Mobile= HTC P3300
ROM= WM 6.5.2
Radio= 3.21.00
_________________
/Regards/EW
Device: HTC P3300

Start > Settings > Connection > Beam Make sure you have checked recive all incoming beams

Thanks!! for the reply...Yeah..thats checked...Any other ????

enable FTP in the bluetooth settings,
ckeck "make this device available for other devices"
find the bluetooth destination you want, and establish a secure connection with, set password.
beam a file
wait 20 seconds after you see your target
transmit
if you find an easier way tell me I'm interested..

Hey all !!!
Thanks for the reply. HOwever, i found an easier way. I installed this Obex and now its perfect. Its working fine.

Related

xda exec issues PLEASE HELP IM NEW TO THIS

Hello. I have a XDA exec on o2.
I upgraded the ROM from their website.
Issues :- If I install in 0506 mode I loose my 3G internet connection and the ability to send and recivie MMS. (I can not find the connection settings)
No one can send me anything by bluetooth. But bluetooth is working as my head set works.
Any Hacks you think I should be running ?
Thanks
Carll
I di the same as you and it works much better than before. You don't need any hack. Just O2 support and demand they give the settings.
For MMS as I did it:
go to your inbox/menu/MMS configuration. Goto the server tabs.
tap new and enter the following:
Server Name: I call it O2 UK
Gateway 193.113.200.195
port number 8080
server address: http://mmsc.mmc.o2.co.uk:8002
connect via: choose yoru network I put My Work network
sednignzie limitations: 100k
WAP version: Wap 2.0
I don't have the bluetooth problem. But .... I was unable to receive files, you can enable this in registry (can't remember now - doing this from work ) but the check the registery OBEX or something
Also after the upgrade my battery icon disappeared but I got back by enabling it in the registry.
Check the hack pool at this forum (hack is not the correct word in my opinion - settings enabling in the registry is more correct).
Either way I do think yo should contact O2 and they are obliged to give you all the settings and help you wiht bluetooth (since it is their upgrade did that according to you.)
Hope this helps.
http://forum.xda-developers.com/viewtopic.php?t=32412
or you could try following the above thread.
Download the cab file and keep it on your storage card. Then you just need to run the file and it is all done for you automatically.
Keep it safe in case you need it again. Saves entering the information manually.
Thanks
http://forum.xda-developers.com/viewtopic.php?t=32412
or you could try following the above thread.
Download the cab file and keep it on your storage card. Then you just need to run the file and it is all done for you automatically.
Keep it safe in case you need it again. Saves entering the information manually.

Cardexport or WM5torage on WM6

I am using XDA Live 0.20.1 together with radio 1.35 on my Imate jasjam.
Before WM6 , I was able to use Cardexport 2.20
But now it does not work.
Windows XP pc discovers a new device named HERM100, then USB Mass storage but at the time of its drivers being installed, "a problem occured...." etc.
So I end up with no device connected.
I also tried WM5torage and it gives the same result.
Is there anyone with WM6 who can use Cardexport/WM5torage ?
Which version of radio rom (is it even related) ?
Thanks...
Go to Start > Settings > Connections > USB to PC
Then unselect "Enable advanced network functionality"
That works for me.
is there any conflict with secure file on storage card is enabled?
Card Export II web page says it's still not compatible with the Hermes. WM5torage never worked for me in WM5. Then it worked in XDA Live 0.10, but was a no-go in the various subsequent releases/versions (tried them ALL just for that purpose!). But I'm happy to say WM5torage works very well in the Black Ed., for me, at least.
I have also this prob, untill now I did not find any working solution for mass storage, if I uncheck advanced network functionality, then driver is sucessfully installed on PC, however access on disk still doesnt work. I tryed WM5storage and also soft stick card export...
coeptum,
thank you. it works with Card Export after disabling "advanced network functionality"
btw, what does that mean ?
Using XDAlive 2.0 it works fine also, I had to un tic the boxes under status, where it says Read only and Removable class. I'm using WM5torage.
WM5torage works for me - for the first time ever! The original TyTN ROM and the 1.35 South Africa ROM did not work with it, but WM6 Black Edition v1.1 does. I'm pretty much confirming most of what whatledog said.
Has anybody gotten WM5torage to work on the Titan/Mogul? I'm currently running WM6.1, but I don't think either worked in WM6 either.
WM5torage 1.8 Working on Apache with helmi 6.1
I took a couple tries, but here's what I did:
Disabled Advanced network functionality in the USB-to-PC settings panel.
This did not fix it on its own, but I have left it off
In the Menu > Troubleshooting turned on Disable RNDIS on Activate
No love. Unchecked Disable RNDIS. Muttered absently.
Menu > Troubleshooting turned on Disable Concurrency
Hey howdy, it works.
jazmatician said:
I took a couple tries, but here's what I did:
Disabled Advanced network functionality in the USB-to-PC settings panel.
This did not fix it on its own, but I have left it off
In the Menu > Troubleshooting turned on Disable RNDIS on Activate
No love. Unchecked Disable RNDIS. Muttered absently.
Menu > Troubleshooting turned on Disable Concurrency
Hey howdy, it works.
Click to expand...
Click to collapse
i had the same problem, and fixed it yesterday by checking 2 points in troubleshooting menu of wm5torafe. you should have disabled concurrency and rndis. that's enough. no need to disable Advanced network functionality in the USB-to-PC settings panel.
Sprint HTC Mogul 6800
Works on my phone now. Card Export v.3.12 was the trick.

Collection of all the fixes for WM6

We should post all the fixes the have been found for wm6 on the dash here to make it easier to find....
Reminder FIX:
From RandyRants.com:
Step 1: Make a change to your Normal profile. Raise the volume of some alert or something. Change something to get the device to create the following file: \Application Data\Profiles\Normal.prof.xml
Step 2: Connect via ActiveSync on XP or WMDC on Vista and copy this file to your desktop.
Step 3: Edit this XML file - add the following blurb to the SoundCategories section:
<characteristic type="Reminder">
<parm name="Script" value="v0p" />
<parm name="InitVol" value="4" />
</characteristic>
Step 4: Save this file on your PC.
Step 5: Set the System flag on this file. You can do this with a right click on the file and setting the properties or via a command prompt: attrib +s normal.prof.xml.
Step 6: Now copy it back to \Application Data\Profiles
I posted this to another thread, but the steps have changed... seems that if you don't have the System attribute set on the profile XML files before moving them to the phone it renders them useless. It also seems that on Vista with WMDC it keeps the attributes fine (inspite of having to change the OS to even see the files) but on XP/2003 with ActiveSync the System flag is removed when the file comes from the phone.
Either way, good luck with it!
Click to expand...
Click to collapse
Rotated video FIX:
freyes01 freyes01 is offline
Member
Join Date: Apr 2006
Location: Miami
Posts: 35
[United States] [U.S.A. - T-Mobile]
Default
getwsted at HF found a solution for the screen rotation issue:
Add the following Key "Rotation" under HKLM\System\GDI\
e.g. [HKLM\System\GDI\Rotation]
Then Add this dword.
"LandscapeMode"=0
It solved my problem with Orb and other Videos with WMP in full screen mode.
__________________
Thanks,
Freddy Reyes
http://www.freddyreyes.com
Click to expand...
Click to collapse
SMS Sent Notification Removal:
Download this Here YOU HAVE TO SOFT RESET FOR IT TO WORK!!
Bluetooth Voice Command Fix:
WM6 Voice Command 1.6
Voice Command is a very powerful program that will allow you to control your WM6 Excalibur with your voice.
* Hands-free phone
* Dial your phone by voice using the phone number
* Contact lookup
* View contacts with a voice command
* Have the subject, time, and location of upcoming appointments read to you
* Media player
* Program starter
* Device Status
Enable Voice Command
Start > Voice Command
Voice Enabled > Yes
Announcement Routing > Bluetooth if Available
This setting will allow Voice Command to use the Excalibur phone speaker to respond to vocal commands, if you don't have a bluetooth headset connected.
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the soft reset, press and hold the home key. This is the default Record Application Button which activates Voice Command. When you hear the beep say, "Help". Voice command will then guide you through the available voice commands.
IMPORTANT: Do not talk directly into the microphone. Hold the phone 4 inches/100mm from your voice. The response from Voice Command will take a few seconds.
A Voice Command tutorial from Microsoft is here.
Enable Voice Command with a Bluetooth Headset
With the current beta release of WM6, you need to modify the following registry settings to use your bluetooth headset with this feature.
NOTE: Your Excalibur has to be application unlocked to make modifications to the registry.
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule
The string value needs to be changed from "OEMAGW.dll" to "\Windows\vcbthag.dll".
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the phone reboots, your bluetooth headset will now be able to use Voice Command by pressing the button on your headset. Wait for the beep, then speak the command.
Viel Spaß mit Voice Command,
jromney
Click to expand...
Click to collapse
Streaming Video Player:
rvbcrs said:
Ok guys here is a .cab I made for the Streaming Media tool.. I tried it and it worked with m.youtube.com!
Let me know if it works!
Download here: http://www.ramonshare.com/files/index.php?share=4&path=TOOLS/RvBCrS_HTC_Streaming_Media.cab
Click to expand...
Click to collapse
anymore fixes please post here..
you could add those to the collection on the wiki
http://wiki.xda-developers.com/index.php?pagename=Excalibur_WM6_Tweaks
please feel free to do that i dont have the time for that...
k i done it
Thanks for the fixes. Unfortunately, none of the work for me. I have the files unhidden and apparently no files appear in my App Data/Profiles folder when modifying any of the profiles.
Also, when trying to add a new key to the GDI registry folder, I get an error message saying I can't do so. I'm using Resco Explorer's registry editor btw.
Error Message!
.PoNeH said:
Thanks for the fixes. Unfortunately, none of the work for me. I have the files unhidden and apparently no files appear in my App Data/Profiles folder when modifying any of the profiles.
Also, when trying to add a new key to the GDI registry folder, I get an error message saying I can't do so. I'm using Resco Explorer's registry editor btw.
Click to expand...
Click to collapse
My friend I had the very same problem you are having now. The reason you are getting that error message is because, your wm6 ROM got corrupted some how. what I did was, reinstall the clean wm5 ROM all over again, after that, I reinstall the new wm6 official upgrade Rom and also you will have to application unlock your device all over again! Now everything will work fine!
Reminder FIX - doesn work.
The reminder fix doesn't seem to work with the release version of WM6 for the Dash.
In fact, if you do this mod, you woun't be able to switch to "Normal" profile.
It seems if the OS determines that the profile's XML file is inavlid in some way, it will refuse to load it, and this mod seems to be invalid to the OS.
This is a BIG bug with the dash (no reminder volume setting) - I hope they release a patch for it.
UPDATE: I just found and read the full version of this fix (where you need to change the "system" attribute) and it actually now does work. I am going to try to create a CAB file to do the patch so users won't have to do all the copy to/from their PC.
UPDATE: See this page for the CAB file - http://forum.xda-developers.com/showthread.php?p=1271705#post1271705
Does anyone know how to ensure that your time is always in sync with your Exchange server? I never had this problem with WM5 but since I have upgraded my Dash's internal clock seems to have gone cuckoo. If I turn it off, and turn it back on my Dash thinks it's the same time that I turned it off at. It's like the clock just stops (would be nice if it happened in real life!)
Barring a fix, does anyone know of a utility that syncs WM time with a time server over the net using SNTP?
Edit: I found this:
http://s-k-tools.com/index.html?m_downloads.html#tsync
hope everyone is finding these fixes useful...
anthoneous said:
hope everyone is finding these fixes useful...
Click to expand...
Click to collapse
see thats why we use the wiki, so you don't need to bump
Somehow when copying back edited profile files, it does not retain System attribute on the flag, which, as already mentioned earlier, renders profiles unsuable.
Here is a simple workaround that I came across:
1) On your phone, open Vibrate profile for editing. Change something and save. This will force it to create the Meeting.Prof.xml profile file in the Profiles folder.
2) From ActiveSync, navigate to that folder on your phone and rename the file to Normal.Prof.xml
Now you can go back to your phone, open Normal profile for editing and the Reminder option will be there.
Hope this helps.
Unable to change profile
Unable to change profile?
Delete files in Application Data/Home/Profiles
then go to Start - Settings - Profiles
Switch to your desired Profile or re-customize your settings on every profile that you want
**xxxx.prof.xml files in Application Data/Home/Profiles contains the customizations made on every profile, example if you have only customized the Normal profile, normal.prof.xml will be automatically generated at Application Data/Home/Profiles.So deleting the xx.prof.xml file will revert the profile customization back to default.
Massive Fail.
anthoneous said:
please feel free to do that i dont have the time for that...
Click to expand...
Click to collapse
Massive Fail.
You've got the time to throw all of what's in your original post together, you've got time to append it to a wiki.
/Massive Fail.

Com Manager wrong buttons

Goodday to all,
I have update my HTC P3300 to WM6.
When i go to the Com Manager and i selected the settings and push the button wireles i get a wrong settings for excample i get the bluetooth settings.
The same when i selected the phone i get the wireless settings.
So the text doesn't attached to the write program.
Does other have the same problem when updated to WM6 and what is the solution to fixed this???
Thanks in advance and Kind Regards
Davidoff

WM6 / Activesync 4.5 will not pair

Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K
Kavafy said:
Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K
Click to expand...
Click to collapse
Open AtiveSync with phone NOT connected, goto "File" and "remove portable device" (or similar, I've italian version, I don't know exacly string in english).
If there is an old configuration, in this way you'll remove it, then it must start the wizard... (I hope...)
Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K
Kavafy said:
Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K
Click to expand...
Click to collapse
I thought it was a re-install... You can try removing all drivers and ActiveSync and reinstalling all, it seems an istallation problem or a wrong ActiveSync version...
Try to download ActiveSync newly
If you have any kind of firewall software try to disable it...
Then, if activesync works, you have to set up new firewall rules...
Did any of these methods work? did you do something else to make it work??
This is how I got it working.....
go to settings/connections, open USB-PCand untick "the enable advanced network configuration"
if this does not work, and if your trying to sync to an outlook server then in settings/connection, choose connections, chose advanced tab, select networks, then ensure both have chosen the same network ( ie my Work Network). On the chosen network chose edit, and you should see a Proxy Setting tab.. Choose this and ensure the only top box is ticked ( this network connects.....)
worked for me... dunno why?
yeah try xda-boj's one it should work fine
start\settings\connections\usb to pc and uncheck 'enable advanced network functionality'
Thanks for the suggestions. I know I wasn't clear in my earlier posts, so:
- I had Activesync 4.5 installed, and it worked.
- Then file transfer from the PDA to the PC stopped working (the files appeared to transfer, but did not appear on the PC)
- So, I uninstalled Activesync 4.5, downloaded it again, and reinstalled it.
- After the re-install, Activesync would not create a partnership with my PDA running WM6.
- The partnership wizard does not start!
- I don't get any error message; in fact nothing happens, except that the PDA connects as a "guest", so I am able to browse files and install software but not actually sync.
- I have tried: disabling Windows Firewall; disabling Avast! anti-virus; checking that all connection protocols are enabled in the "network connections" control panel; re-installing Activesync again; and finally I got the same error on another PC.
- I haven't yet tried unchecking the "Enable advanced network functionality" box - I'll try that as soon as I get home tonight.
Beyond uninstalling Activesync, is there anything else I should be doing to start with a clean system?
Thanks again,
K
I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time
I've tried unchecking "Enable advanced network functionality", but that doesn't solve it!
K
lhrt said:
I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time
Click to expand...
Click to collapse
Where can I find this option?
K
start->settins->USD to PC-> Enable advanced network functionality
Oh, OK. I'd already done that! Keep coming in with suggestions though!

Categories

Resources