Niggly Problems - SMS and Contacts - Touch Pro2, Tilt 2 Windows Mobile General

I have had my TP2 on Orange UK for a while, recently upgraded to WM6.5, and have a couple of really frustrating problems:-
1. If an SMS message cannot be sent it goes into drafts and doesn't resend automatically. This is bad enough, but when I open it to try to resend it has my own mobile number as the recipient, so cannot simply press "send". The only way I can resend it is by selecting "menu" then "forward" and then re-entering the recipient. Unbelieveably frustrating!! Can anyone help please?
2. I'm a long time HTC WM user, and well used to the challenge of Phone contacts being difficult to navigate (however careful you may be when swiping the list, accidentally touching a contact for too long opens it, and when you press "Back" it takes you to the top of the list... this is rubbish!! I have about 300 contacts on my phone. On upgrading to 6.5 I now have a new "Contacts" icon in the start menu, which is obviously a different app. Its far more user friendly, better layout for my 50 yr old eyes and doesn't have the same issue of going "back", as pressing the "X" takes you back to where you were in the list. Is there any way you can use this as the default app for contacts in the phone menu?

Related

SMS is received by recipients mutiple times

Hi all,
Since I upgraded my T-Mobile ppc to 4.01.16 ENG Rom and 6.25.02 Radio, I have had bad experience on SMS sending. The sms I send is received by the recipients twice or trice and I am sure that I am charged with the extra sms. I have been thinking that my new radio version is not compatible to where I am (I am currently in Asia-Pacific/Philipines which uses GSM900/1800 but I am going to and from the US and Phil so I also need my device to be compatible with US network). I have been researching this forum and found out that radio downgrade is not possible and very dangerous for my device.
But now, I think I have found the real culprit. I always send messages through the 'mail' software (today panel and tap on 'no unread messages' part), of course through SMS. When I send the SMS and close the 'mail' software before before the message is sent (that is before the message sent icon on top appears), SMS is sent mutiple times. But when I wait the message sent icon to appear before I close the 'mail' software, the SMS is only sent once. I am very sure of this for I have observed this for quite some time already.
Is there an app or something to correct this? I need help for I am charged at least twice or trice for the SMS I send. Thanks a lot.
Try this method: Open Contacts, select the name and tap & hold on the name and select "Send SMS". Sometimes the s/w doesn't get the aknowledgement from the GSM network so it attempts to send it again.
Thanks Biso. Can you recommend a better software other than the 'mail' default program? Or can I make the mail program 'unclosable' so that it will on be minimized. I'm using SPB Pocket Plus so the 'x' button is closing the apps. I just want hte mail program to be also minimized ang the rest are closed. Thanks
Hi,
I don't prefer any other mail program than the standard one especially if you are connected to MS Exchange server. It's fully integrated with it, but for POP3 mail I heard that nPOPw is very good http://www.pocketpcfreewares.com/en/index.php?soft=839
As for minimizing the mail s/w, even tho I don't see any difference between closing and minimizing (except for on line s/w like MSN messenger), but with each task manager (I use Magic Button) you should find an option to assign the current window to "Keep Alive" flag. Then the x button will only minimize it (switch to the next window or Today if all off).
Thanks Biso. Just found out that SPB Pocket Plus has a 'minimize by gesture' feature which you can add to list the program you just want to minimize. And it works, when I just minimize the 'mail' software the sms I send is only sent once (recipient only receive it once). Thanks a lot. Guess this is a bug on T-Mobile WM2003 Rom?

intellipad question regarding sending text messages

When on the today screen, you select new message. Upon seeing the new message screen and intellipad input method is selected, you can't use the intellipad to choose names in contacts. You can type out the name of the person in your contact, but it won't automatically complete the name, and verify the contact you are sending to (with the contact's cellphone number displayed). But if you type a contact's name using the keyboard, after hitting 3 keys, it automatically displays candidates that you can choose to send message to. This creates additional hassles, use a keyboard to select the contact you're gonna send message to, then sellect intellipad to input text messages. It's kind of a hassle. Any ideas?
Agree.
I do it the other way around...when I want to send a text message, I click on the call button, find the person I need with intellipad, then click and hold the name, and the menu that pops up allows me to send them a text message...easier and faster this way!
Ok. Thanks for the tip. Sure hope somebody fixes the issue though.
Unfortunately, it's the way IntelliPad was designed.
<techie>
Instead of trying to handle the entered text on whatever text box/trich text pad/label/unsupported text object, IntelliPad builds the word in it's own little box until you tell it to move on (by pressing enter or space), and then just moves the word onto the active control.
This way, you have less issues with the text not working as expected, even though it causes the one or two niggles like in Messaging .
</techie>

Issues with WM6

I upgraded to WM6 at the weekend and I've got a couple of issues. I'm not sure if this is for all WM6 roms or just the one I have ( LVSW(2007/04/23) RUU_Hermes_WWE_3.30.0.1). I've got the following problems:
1) When I open any message it skips to the bottom of the message which is really frustrating. How can I stop this?
2) I've hidden my sim contacts but when I compose a text message and type a recipient they still show up. How can I hide them completely?
3) I'd like the left button when viewing my inbox to be changed to "New" rather than "Delete".
Any help on the above 3 would be great. I've had a search for these issues/changes but I could not find anything

Delete multiple/many text messages or emails

Hi guys,
Is there an easy way to select and delete a lot of SMS messages or emails?
I use my Orbit for work/on call and when things really go wrong we might be alerted with 40+ SMS in a couple of minutes. It's a real pain in the backside deleting them individually....is there any easy way to do it?
Hi Fingery,
You can do a multiple select by just swiping over all the messages to highlite them all then select delete at the bottom of the screen..
If they come in at irregular intervals and you have messages you want to keep scattered around them then goto Menu>>tools>>sort by and sort by name thus collecting them all together then do a multiple select. Remeber to put the sort by back to received after your finished.
Dont forget to empty your delected items when your ready as it can chew into your memory very quickly.
Gilgamesh.........
Check out the My Mobiler thread above
I was able to delete multiple SMS and e-mails using the programme. Just select individual or groups of messages using the Windows [Ctrl] or [Shift] and left mouse function

question on sending messages.

How do you select several people at a time when you send a same message?
its very annoying when u only allow to select one person at a time and click on add recipient millions time when you try to send a message like "happy new year" to 300 people.
Anyway, happy new year to everyone.
if you press enter on the key board it goes to the contact list you have to pick one at a time but you can do it in the same message, not sure if there's another way around this...
Yes, it's limiting. I had been looking for a mail client that has the concept of mailing list for a long time but could't find one.
If anyone knows of such a mail client, please share.
Power SMS has a functionality to define "groups" for multisending, and selecting a group it adds automatically the recipients in standard sms. of course you still have to add contacts one at time, but you have to do the process one time only (next year, hopefully, you'll still have the "new year's eve" database)
bbonzz said:
Power SMS has a functionality to define "groups" for multisending, and selecting a group it adds automatically the recipients in standard sms. of course you still have to add contacts one at time, but you have to do the process one time only (next year, hopefully, you'll still have the "new year's eve" database)
Click to expand...
Click to collapse
so u mean we can't go to multi-selection mode and select several people at at time then? Does the Power SMS able to do so? Coz u can't define a group that work for every message.
But thanks.
as an add on to your Q how can you make the text box bigger any one know?
Have you tried groupsms in google?
Worked for me. I only know because someone else on this forum recomended it to me for exactly the same reason but in another thread.
Hope this helps.
Enter your numbers as follows
<no 1>;<no 2>;<no 3> and so on...
You can save a contact with the mobile numbers set to a group of numbers in the format svown and then enter this one contact and the to: list is filled with the numbers for you.
Actually... there are 2 others ways to add multiple recipients... although neither is as quick as simply ticking all that apply!
[1] Tap the word "To:", select a contact, and repeat.
[2] In the space after the "To:", type the first letter of the contact name... and a selection of contacts starting with that letter will be shown in a horizontally scrolling list just above the keyboard. When you've found which contact to add in that list... click it, and it will be added to the "To:" field, followed by a ";" ready for you to repeat the process for the next contact!
GROUP SMS
Try Group sms
http://www.freewarepocketpc.net/ppc-download-group-sms.html
Im trying to send out a mass text about the super bowl right now so i hope it works
Other wise i have to get out of bed now and i dont want to!!!
Yeah ok it works, some of my contacts didnt show up though, maybe they are not outlook contacts or something, i have to look into that another time. So only one person didnt get texted. Works for me. and its f f f freee!
bug
sidepa said:
[2] In the space after the "To:", type the first letter of the contact name... and a selection of contacts starting with that letter will be shown in a horizontally scrolling list just above the keyboard. When you've found which contact to add in that list... click it, and it will be added to the "To:" field, followed by a ";" ready for you to repeat the process for the next contact!
Click to expand...
Click to collapse
I've been using this for ages...grown very comfortable with it too. Now, yesterday, all of a sudden, something happened and it doesn't put in the ";" automatically I admit, it's only a small thing, but it's annoying once you're so used to doing something one way. So if anyone has any idea how to fix it...please help!
PS: Closing messaging and restarting it didn't work, and neither did a soft reset
sidepa said:
Actually... there are 2 others ways to add multiple recipients... although neither is as quick as simply ticking all that apply!
[1] Tap the word "To:", select a contact, and repeat.
[2] In the space after the "To:", type the first letter of the contact name... and a selection of contacts starting with that letter will be shown in a horizontally scrolling list just above the keyboard. When you've found which contact to add in that list... click it, and it will be added to the "To:" field, followed by a ";" ready for you to repeat the process for the next contact!
Click to expand...
Click to collapse
i've just tried Your recipe for sending group message and it's brilliant. THNX for the tip

Categories

Resources