changing power on/off button? - P3300, MDA Compact III General

HI all: I received from a friend an arte100 with the power on/off button broken.
Meanwhile the owner doesn't want to spend money on the resoldering, is there any trick into the register in order to change the physical button that power on/off? It shouldn't be enough for me to install a program that power off, duethe problems of starting pressing any button when it is inside the pocket, in the bag....
Thanks in advance.

Related

Power button problem

Hi all,
My XDA IIs works well before. But few days ago the Power button doesnt work properly, it can turn on the phone, hold to turn off the back light, but I can't use it to turn my phone screen off like before. Anyone has same problem ?
Can you see any part of the screen? It might just be that the backlight adjustments are set too low when the unit isn't cradled. You might be able to see the screen in daylight.. or maybe it was inside your home. I forgot where I was at when it happened to me. In anycase, if you can see a bit of images on your screen, go into the Backlight properties and change the setting to your liking.
Good luck..
The problem is i can just press the power button to turn off my phone BEFORE (the screen is completly off), and NOW it doesnt work at all ! When my phone was off, I can press the Power button to turn it on, or when I hold it for few seconds the back light will be turned off, but press once to turn off. I dont know why, if somthing wrong with the Power button it should be doesnt work at all, that's mean i cannot turn on my phone as well. But other functions of the Power button are still work well, except the 'Turn off' :roll:
power off doesn't work anymore
I have the same problem here. I can't use the power button to power off my qtek 9090!!
i can use the power button to turn my pda on and to switch the background light on and off - so the "hardware side" of the power button is working.
however, i can't use the power button to turn off the device. it's very annoying, because i can't put it in my pocket after finishing a call :-(
this should be some sort of a software problem - so i hard resetted my device (a couple of times) - but that didn't help!
can anyone help?
thanks,
lorenz
the ba doesn't turn off it is always on staand by mode. ->settings -> system -> button lock
this will stop any missed call because when the ba is in standby the power button is the only one to work
power on is no problem. i can't put my BA into standby mode. if i press the power button while the BA is turned on, nothing will happen. the screen will stay on, the background light stays on.
i have no way to put it into stand-by with the power button!
try this and see if it works. it's a software app that wil rest, shut down, and turn the screen off. just copy it to your BA temp directory and install it.
power button problem
nemchua
Is your problem solved ?
Because I have the same problem.
Power of switch doesn't work !!!
Any help would be welcome.
power button problem
Does anyone solve the problem???
Had the same problem...
I had the same problem going on for about two weeks or so...never changed anything and it went away all by itself.
The problem has not come back now in over 4 months.
Sure would love to know what the problem was tho...
Greetings,
Noddy
Power Off does not work
Add my name to people with this problem.
The only event I can link it to is this: I deleted my Motorola Bluetooth headset and installed a Logitech headset. I noticed the problem (can't turn OFF with POWER BUTTON) soon after that.
same problem for me ..... someone must know !!!!
I think it is a hardware problem. The contact is not making cleanly. Disassemble and spray time, perhaps.
It's a standard push switch, easy enough to replace, I occasionally list themon ebay but any phone repairier should have them in stock.
Richard
i had same problem yesterday afternoon, but it is ok now. recovered by himself
Write again in two weeks and let us know if it is still healthy. In my case, anintermittent problem became continuous.
Can't turn the screen on after pressing power button
I have a problem with my Bell Atrix. After pressing power button to lock the screen, i can't wake up the screen up by pressing that button again. Could anyone tell me how to fix it pls.

Mapping Power button

Hi,
does anybody know a program to map the power button to a different button lik the OK-button to switch an MDA III on and off as the power button is broken?
Greetings
Peter
VJKeypress can do this. Also VJEschaton I think...
V
Power button mapping
I've tried Vijay 555 to assign power on/off to another button, but it has not worked. I need to map on/off elsewhere, whilst having the button lock option, as my normal Blue Angel power button is broken.
Have I used the software correctly? Is there a way of re-mapping power button AND having button lock still not allow any other button to power the device up?
Any help would be great - whilst I carry on searching the site!!

How to modify power button on TP2

I'm using HTC TP2, but it's hard to press power on/off button. Now, I want to modify to use another button to power on/off. Please help me to modify it. Thanks!

Disable Power button lockscreen

Hi Guys,
I grabbed a S4 Mini recently and need to find a way to stop it powering off when it is in a protective shell.
I have a Pelican i1015 for the phone that it fits into, however the power button on the side gets depressed when the case is closed.
God knows why they put it there.
Is there any way to stop it from powering off on long press if the screen is turned off?
Cheers
You should be able to remap the button default action with the Xposed Additions module installed.
Thanks! will that stop it for powering off when long pressed though?
No, it won't (if you want). You can set or disable actions for click, double click and long press of hardware buttons, separately for screen on/off states.

HELP...Z1c Strange issue. Can Anybody Pls Help URGENT!!!

Hi Friends...:crying:
My Xperia Z1c Phone was good but dont know what happen to it "Power button Stopped Working" all of a sudden.
Phone Problem are:
1) Power Button Not Working
2) Power button function shifted to Volume up key
3) whenever i press volume up key.. volume increases but at the same time power button function activates...i mean it asks for power off, restart,profiles,screenshot... just like power button functions. both power button and volume up key runs when volume up key is pressed.
4) i am unable to turn off my phone... so i had to turn off my phone by pressing volume up key. even it gets turn off it restarts itself. i believe there is some Hardware problem.??
5) when i press and hold volume up key for 3 yo 4 sec it vibrates 3 times and gets turn off just like we do it by pressing the small button next to sim slot.
i think this is strange hardware problem... anybody got solution for this Problem or i need to take my phone to Local repair shop..?
Please help me.......:crying:

Categories

Resources