configured the NAM1, but I need to configure NAM2, for use in VIVO CDMA (Brasil)
through the code ** 772 not meeting the nam2 only nam 1
**772 to enter service code area
000000 to enter programming phone number area
1º - Shows MEID (can't change) - press Enter
2º - Shows ESN (can't change) - press Enter
3º - Shows AKEY (don't know what is that) - press Enter
4º - Shows SVC MODE NAM1 - type your phone number - press Enter
5º - Shows MSIN(MIN) - already is your phone number, just press Enter
6º - Shows CDMA Home SID (don't know what is that) - press Enter
That is, but it didn't worked on my country. Probably because the MEID number. Here they work with 8 hex digits, not the MEID 14 hex digits.
someone can help ?
someone else can help me?
Related
use the link in my other thread to unlock the phone then follow these steps
1. Write down your (hex) esn: (under the battery)
2. Call sprint and ask for master unlock code
with every esn there is a different master unlock
code (MSL) number for sprint tech support
1-877-654-9111
3. Get code end enter on phone ## (MSL)
4. enter this info that you get from Alltel
MDN : (your phone number)
(MSID)MIN:
(HOME)SID:
when you enter all that and hit ok the phone will ask to reset the phone hit ok then it will shut off and turn on.... make a test call and you should be in business !! Well that’s what worked for me and I hope it all works out for you all!!
i try with this manipulation:
To unlock the p552 (orange network) you have to do the following :
1. Power ON your phone with a not allowed sim card (one that didn't come with the phone)
2. Type *#865625#SIMUNLOCK CODE (provided by your operator) - without clicking on the "call button".
3. A popup will appear telling you it's done.
but after Type *#865625#SIMUNLOCK CODE Nothing changes on the screen
plz i need help .................any one can help me
Long road almost there, error 67 :( calls & text ) but no data :( [evo on boost]
THE GOOD AND BAD NEWS... THE GOOD NEWS FIRST! i got my evo4g over to boost mobile with my boost account i already had open i can outgoing text and recieve text (no mms right now) i can call out and get calls in, works great shows my boost cell phone number on my evo and everything..
NOW THE PROBLEM...
my DATA doesn't work at all... i get the error 67
I TRIED THESE INSTRUCTIONS AFTER SEEING MY DATA DIDNT WORK..
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If data is not working move on to the next steps...
(Note: These are steps not verified by me as I still dont have neither 1x nor Evdo working but some people say 1 or 2 or all of these following steps combined worked for them, so i guess it depends on the network you are trying to get on)
1. First attempt to update your profile if it can or update PRL
Menu>Settings>About Phone>System Updates>Update Profile
Reboot and see if data works....
2. If still no Data, plug in your Hero to the computer, dial ##3424#, go to QPST folder and open QPST Configuration app.
Under the Ports Tab if the active COM port your phone is on is not in that list Click Add Port and add it.
Then go to Active Phones Tab, select the phone and then go to Start Clients>Service Programming
A new window opens, hit ok, then click Read From Phone on the bottom left, its gonna ask you for your MSL type it in
Then go to the M.IP Tab and under user profiles click on profile 0, click edit, and then deselect Profile Enabled, hit ok, then click Write to Phone.
Close the program unplug your hero, reboot it, and try your data again.
3. If still no data, plug in your old phone to the computer, open up QXDM
check Connections and make sure your COM port is being read.
Go to View>New>Common>NV Browser , in the Category Filter drop down menu, filter only Data
Then scroll down to ID numbers 1192 and 1194
Click read and copy down all the values in there until u reach 0x00
Then unplug your old phone and plug in your hero, dial in ##3424# and go to NV Browser
navigate to the same ID numbers 1192 and 1194, (just to be safe copy all the values here so you can revert back to the originals)
Then double click each value under the input column and it becomes changeable and change all the values to the ones from your old phone and hit write
Close QXDM unplug and reboot your hero, test Data again
4. If still no data, plug in your old phone to the computer, open up QXDM
check Connections and make sure your COM port is being read.
Go to View>New>Common>NV Browser , in the Category Filter drop down menu, filter only Data
Then scroll down to ID numbers 465 and 466
Click read and copy down all the values in there until u reach 0x00
Then unplug your old phone and plug in your hero, dial in ##3424# and go to NV Browser
navigate to the same ID numbers 465 and 466, (just to be safe copy all the values here so you can revert back to the originals)
Then double click each value under the input column and it becomes changeable and change all the values to the ones from your old phone and hit write
Close QXDM unplug and reboot your hero, test Data again
NONE OF IT WORKED.... SO I WENT TO THE SECOND SET OF INSTRUCTIONS.
Run the QPST config and plug in your phone, make sure your phone is detected in the COM port list. If not click Add New Port and add the one that it has detected your phone on. What it says may vary but USB will often be in the description.
Run QXDM click Options -> Communications and set the Target Port for the same one QPST config listed for your phone.
In the command box at the top type "spc 000000"
Note: If your SPC is not 000000 then you need to use the correct number instead!
If successful you will see a window titled "Command Output" that will output some text with the final line reading "SPC Result = Correct"
Next in the command box type "requestnvitemread ds_mip_ss_user_prof"
This will get you a lot of stuff in the Command Output window. It will start with the "DIAG TX item" section, ignore this one, we are interested in the "DIAG RX item" part.
The actual keys are 16 lines and marked in the output as 0-15. You will notice that quite handily both HA and AAA are both there. Take the part after the "0x" and that is actual key data. Just write down (or use word, notepad, whatever) to record this for safe keeping.
If you are doing this right then you have a long string of 30 characters all strung together for each key. DOUBLE CHECK YOUR COPYING! A single mistake will cause this to fail.
Putting the keys back into the phone:
Load QPST service programming, go to the M.IP tab. Double click profile 0 (in the white box) and use "Enter hex value" to enter your backups of your HA and AAA keys.
Write to phone.
Soft reset. (may not be required but I do it for good measure)
do "requestnvitemread ds_mip_ss_user_prof" for the sprint info and "requestnvitemread ds_mip_ss_user_prof 1" for the boost info
I'm telling you.. If you're getting the error 67, the following these steps above will fix it.. I'm on the Sprint network and the problem i was having was, in "Profile 0" The username which began with A000000 (this is actually your ESN #) Was from the original phone, not the donar phone... So i took the battery out the donor phone and looked at the ESN (not DEC) and began to type A00000 etc.
Then i used the steps above to get AAA Shared Secret from the Donor phone.. My AAA Shared Secret was 32 Alpha numeric characters...
i did that and still no dice.... i got the AAA key and the HA key .. both were 32 characters...
i even went as far as to get the profile info from the incognito phone, for profile 0 and 1, and made it exactly the same on my evo and addresses for the HA and alternate HA ADDRESS... still no dice.. i went into debug mode on my evo and even hit the restore to start fresh , and let it download the data via the servers... still didnt work...
i even re-entered the profile info and etc, for profile 0 and 1, and still not working
i know im close i just need to finish the puzzle please help.
oh yea, and when i go into debug mode it shows the authentication as failed.. i dont know how thats even possible I've triple checked the HA AND AAA keys via QXDM and they are the correct keys from the incognito boost phone.
If your IMEI is corrupted and/or shows 0s this could help you fix it. By using these steps you will not be able to change your IMEI to a different one than your original.
1.You need to be on stock ROM
2.Phone has to be rooted
3.Dial *#7284# on phone's keypad
4.Click Qualcomm USB Settings
5.Select RMNET + DM + MODEM and click ok
6.Download QPST and install it QPST
7.Connect T999 to Windows PC with USB cable (make sure you have all Samsung drivers installed and working)
8. In Windows open Device Manager, go to Ports (COM&LPT) and look up what port your T999 is using
9.Open QPST Configuration program
10.Click Add new port
11. Enter port (for example "COM6") from step 8 to boxes "Port" and "Port Label"
12.Open QPST RF NV Item Manager program
13.From top menu click on Settings then Comport
14. In Comport Configuration window click on drop down menu and select your port from Step 8 then click OK
15. In RF NV Item Manager click on Read Supported NV RF Items (first toolbar button or select it from File menu on the top)
16. Below on left side go to line number 550 and click on it
17. On the right side, check box "Hex" this will display 9 boxes below where you enter your IMEI
18. You enter it in pairs of 2 digits and backwards
Example:
your IMEI is 353024052511214
8 (this number is not part of your IMEI but has to be entered)
3a (first digit of your IMEI ,"a" has to be there also)
35
20
04 (this can be written as just 4 also)
25
15
21
41
19. Click Write NV button
20.You can reboot and disconnect your phone now.
21. On your phone's keypad dial *#7284# go to settings and check MTP + ADB to go back to original state.
Source of info above
Does anyone know how to get to the network control via the service menu on the ATT note 4?
I know *#197328640#. will open the Debug Screen, Im not sure how to get to the Phone Control, then Network
Lock and then the options menu.
Is it not a option at all?
Network Secret codes for Samsung galaxy- SOME WORK FOR THE NOTE 4 SOME DONT
*7465625*638*# This code gives you the ability to customize Network Lock MCC/MNC
#7465625*638*# Use this code to perform Network data locks and (Insert Network Lock)
*7465625*782*# Customize your Network Lock NSP
#7465625*782*# input any semi- Partiality Network Lock Keycode
*7465625*77*# Key code for Network lock SP
#7465625*77*# Secret key to insert network operator
*7465625*27*# Secret code for Network lock and operation for NSP/CP
#7465625*27*# Secret code for Samsung galaxy Content Provider network insertion
*#272*IMEI# Samsung galaxy s3 csc code -gives your the buyer code
*#2263# RF Band -select your network mode type
eyesofice said:
Does anyone know how to get to the network control via the service menu on the ATT note 4?
I know *#197328640#. will open the Debug Screen, Im not sure how to get to the Phone Control, then Network
Lock and then the options menu.
Is it not a option at all?
Click to expand...
Click to collapse
This is what ive seen online:
On the dialpad on your phone, type in *#197328640#.
Then select [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3] Perso SHA256 OFF.
Wait for 30 seconds or so before returning to your main menu by choosing back.
In the main menu, you should see a “Network Lock” message, now choose [4] NW Lock NV Data INITIALLIZ.
none of this is a option:
Then select [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3] Perso SHA256 OFF.
Wait for 30 seconds or so before returning to your main menu by choosing back.
In the main menu, you should see a “Network Lock” message, now choose [4] NW Lock NV Data INITIALLIZ.
Any suggestions?
Ive found: IM TRYING TO UPDATE THIS ASAP, IM CURRENTLY AT WORK AND NOT SUPPOSE TO HAVE MY PHONE OUT SO IM TRYING TO GO MENU BY MENU
A found the way to enable ServiceMneu on Galaxy Note 4
*#0011#
Menu>Back
Menu>Input>Q
Menu>Input>0000 wait some seconds and Hello service menu )
Then you get a screen that says:
1 Protocol State
2 UE SETTING AND INFO
3 ECT
4DEBUG SCREEN(OPEN)
5 HW TEST
WHEN ACCESSING THE DEBUG SCREEN YOU GETS
1 BASIC INFO
2 NAS INFO
3 AS INFO
4 SIM INFO
5 CDMA DEBUG INFO
when you clock on CDMA DEBUG INFO it takes you to a Debug Menu and cant click on it... not sure if there is a letter or a number that needs to be put in there to access that menu further
When you select SIM INFO
You get 2 options
1 GENERAL INFO
2 QMI UIM STATUS
When you select NAS INFO you get 6 options
1 MM INFO
2 GPRS INFO
3 REJECT INFO
4 BACKOFF FPLMN
5 SMC RESULT INFO
6 CALL END CAUSE
When you click on UE Settings:
UE SETTING
UE PROTOCALL MENU
1 AS
2 NAS
3 CDMA
4 GCF
5 SIM
6 GPS
7 IMS
8 TDSCDS
When you select 1 AS you get the following options:
AS CONFIG
1 FREQUENCY LOCK
2 RELEASE VERSION
3 DSDS INACTIVITY TMR
4 DRX CONTROL
5 SECURITY CONTROL
6 AMR CONTROL
7 LTE FGI FILE CONTROL
8 ACQ DB DELETE
9 NULL INTEGRITY MENU
When you select 5 Sim you get:
SELCET SIM
1 SIM CLASS CONTROL
2 UIM RESET CONTROL
3 IMSI REPLACEMENT CONTROL
4 SIM FPLMN CONTROL
5 EF_RAT CONTROL
When you select Protocal State
1 BASIC INFO
2 AS INFO
3 ECT ( PRESS ON THAT AND IT SAYS MENU DOES NOT EXIST- WONDER IF ITS A HIDDEN MENU THAT NEEDS A KEY SEQUENCE TO GET TO THE NETWORK LOCK
4 NAS INFO
5 SIM INFO
6 PROTOCOL SIMULATION
Others that I have found but not tested:
Samsung Galaxy Secret Code
*#06# (Display IMEI number)
*#1234# (Display current firmware)
*#*#4636#*#* (Diagnostic and general settings mode)
*#*#7780#*#* (Factory soft reset)
or *#7780#
*2767*3855# (Factory hard reset to ROM firmware default settings)
*2767*4387264636# (To display product code)
*#272*imei#* (Display/change CSC code)
or *#272*HHMM#*
*#*#1472365#*#* (GPS test settings)
*#*#197328640#*#* (Service mode main menu)
*#12580*369# (SW & HW Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)
or *#*#34971539#*#*
*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*782*# (Configure Network Lock NSP)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)
A found the way to enable ServiceMneu on Galaxy Note 4
*#0011# type this code "Q" than 0000 type don't see the service mode network band change
please help me how to do it this note 4 function .........