I tried to setup android 2.0.1 eclair. I did everything said but it didn't work. I wait like 20 minutes and I get an error : "something used micropklt_lcd_ctrl . This function should no longer be used". Another thing when I enter Bootloader other blackstones show (LED) v6 and I see (LED) v5. This difference doesn't effect anything when using Winmo ROMS, only I get an error in the begining please update firmware. Nothing else. Is there any way to update this firmware or is the problem causing my android to fail something else ? Please help me. Thanks in advance.
Use the Android Questions at the top of the forum please
As per above post, thread closed
Related
Hi
I have just tried to update the rom on my xda exec (downloaded from the o2 microsite) it seems to load fine, but when i do a reboot I just get a wierd green & red speckled screen.
I have tried to update the rom twice now, once when the xda was on, & once from the bootloader screen.
Both times it seems to install correctly, but i get the strange screen.
HELP!!!
Add. My battery seemed to go to about 30% whilst i was updating. Could it be the battery? Can't charge it now to test. Can still get in bootloader screen.
PLEASE HELP!! Thanks
Same Here
I have exactually the same problem!
I downloaded the latest ROM from the My-XDA webiste (O2 Ireland) and it supports the XDA Exec as sold in UK and Ireland.
The upgrade goes fine but when I hard reset it just get a fuzzy screen full of red/green spots (lise interferance on a TV).
Have reinstalled the ROM from another PC and the same thing.
Can access the bootloader (v2.01) with no problem.
Have downloaded the ROM from another PC and tried from there and same thing?
Can anyone help?
Is there a known good ROM file that someone has used to rule out the file, as the XDA was fine until I ran the update.
Please help,
IrishLad
search be4 post
Update
I have tried 2 other ROM's on my XDA Exec and its exactually the same issue.
Once it gets flashed successfully and reboots i get the hazed screen which i cannot use. So its not the ROM file.
Has anyone got help with this, I have searched the posts already and found no solution that it why I have posted this thread.
Please Help,
Thanks,
IrishLad
So its not just me then! Thought I had cocked it up.
If this has already come up in these forums, I cant find it. Please at least send link to the previous problem if it is in here somewhere.
My XDA is dead!
Many thanks for your time & knowledge
Mark
try this one
try this configuration :
O2 XDA EXEC WM6 crossbow
Rom version : 2.02.00 WWE
ROM date : 03/10/07
Radio ROM : 1.15.00
Protocol version : 42.51.P8
ExtROM :UNLOCKED
have fun
the screen is funky but the xda is dead
I too am having this problem and am getting very frustrated.
I have searched the forum for hours and am not getting any closer to a sollution.
If anyone has resolved this problem in the past please send me a private message. I will love you forever if you do.
I had the same problem i think its a dodgy rom on the O2 website
I went into boot mode and used this ROM
http://forum.xda-developers.com/showthread.php?t=297256
Works a treat and is loads better than the normal o2 Rom
Thanks for the feedback
I have tried a few ROM's already with no success.
I will however try the ROM you posted and let you know if it works...
Thanks,
IrishLad
IT WORKED!
Not sure how, or why this worked.
But i installed the Crossbow ROM as listed previous and its working.
And can I just say the Exec is brillant now, its much faster, more responsize and works perfectly.
Thanks for the info, but I had tried 2 different ROM's previously and they never worked let I used one previously with no problems.
Either way I am now staying with Mobile 2006.
Thanks,
IrishLad
ukron is a god
YIPEEEEE!
IT WORKED
Thank you so much
I am very happy. Could you tell?
help
i have the same problem as you guys.
and more i can get my xda exec in to bootloader usb at the top and v2.01 at the bottom
but when i got to update it with the wm6 upgerade mentioned earlier
i get a connection error, please con somee one help
im using vista could this be the problem i have a hdd around some where that has xp on should i try that.
also i dont know is any of you knew but when ur in that messed up screen
if you press the lightbuld button a sort of i guess diagnostics or somthing screen pops up
Enable KITL NO
Clean Registry Hive NO
Formate Storage NO
you can change the no/yes's iv only got the enable kitl to do anything though. change it to yes buy using the buttons by the screen and then the center button it take you to the screen below
Select KITL Transport:
USB KITL
SERIAL KITL
ETHERNET KITL
Select KITL Mode:
ACTIVE
PASSIVE
any help with this will be appreciate
where can we find that crossbow wm6?????is that the one thats needed???
Someone please post a link 4 crossbow wm6 latest
would really b greatful...im it to me, email, or post it either way is good 4 me
THANKS,
Randy
no need problem solved....wm6 crossbow was def. needed
hi there,
i have just taken t-mobile dash and love it it came with windows mobile 6 but i just wana upgrade to kavana rom or rickys rom
i have tried several times but i get error on completing 3% it shows Error 270 ur file is corrupt.
please help me guys or give me the link for downloading fresh rom.
i want realplayer of a player which can play rm file
Thanks in Advance
once again..this topic is posted daily. use the search or scroll through some threads on here...you will find the answer..i dont get why people post an issue before bothering to read...
as far as i know now, you need to go in bootloader. Keep the sym camera button, then turn the power on. You will go to bootloader screen.
Then plug in the usb connect to the PC . Flash ur original ROM . You can find a lot here
But poor me i still stuck . Hope u will be alright
you just had to look a little bit...
See over here:
http://forum.xda-developers.com/showthread.php?t=388104
Thanks Guys Now Its Working I Unlocked It And And Then Upgraded It Worked
Thanks Guys Now Its Working I Unlocked It And And Then Upgraded It Worked
Hey guys, I've used the search function to find an answer to this 262 error when updating to the latest rom. Mostly the answer was that the HardSPL needed to be installed, yet I've soft reset my phone and checked that hardspl has been installed.. and it has?
I've tried about 4 times now, and each time the install bar doesnt get any further than 0%. Any help or abuse welcome, please use small non technical words because I'm new to this, and all your abbreviations are driving me wild
which version on Hard SPL do u have? (can be checked by going into bootloader - instructions in Wiki)
What ROM are u trying to Flash?
Solved now guys, thanks for the feedback anyway.
Mods can close the post now.
How did you solve this problem? I have not been able to solve this yet.
It is so damn annoying, nomatter what I do I keep getting that darn error :S
This happens with evrything that I try to install.
The onlything that I have been able to install was HardSPL.
But even tho I installed it, does it not work :/
would have been nice if someone would have warned us "rookies" about AlexSS ROM being a Beta Test and that it would expire on it's own and throw a screen up that reads "this concludes the beta test of this software, yada, yada,yada". problem is when you try to flash another rom you can't because it won't activesync. still playing with it. have done soft/hard resets but seems by the time you install the certificate allow and run sda unlock, that damn message pops up again, cutting off the activesync. now i do have 1 question. when in bootloader mode will the phone activesync? in the sticky's it's said to hit the camera button.as in 1. there's 2, the Alt/Fn and sym buttons for the camera app. i will also try the CID unlock. any suggestions ? what am i doing wrong ?
If you have a problem with a ROM use the ROM thread don't start new...
Get into bootloader and flash stock ROM, then choose another ROM, i'm sure that if you read the thread a user already noted this.
Thread closed.
first off, I am sorry for the many posts ans questions about this but i cant get any solid answers or help. I have tried every thing suggested and still no results. when I go into about phone at the bottom (i forget what it says) but the answer says "custom" I have ran every version of odin and have tried, CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5 , also N900TUVUBMI7_VEGA.tar.md5, also N900TTMBBMI7_CSC.tar.md5, and have tried different cords , ports, turned off all security's,. I got into developer mode and checked the usb debugging box but I don't have the option in security to change write privileges.. when I run odin sometimes it will say reset, sometimes it says pass but only once did it reboot the phone, but I have no super user app in the drawer and in odin mode it says write protection: Enable (in grey) it also says current binary :custom, system status :custom, know kernel lock 0*0, and knox warranty void: 0*1
I think I have gotten down all the info I can think of that may help someone figure out what the problem is. I would really appreciate any help or ideas you may have and appreciate your time helping me. I will be sure to hit the thanks button.
also I should when I do reboot my phone it will still go to my launcher but constantly a message ( unfortunately direct pen input has stopped) I have to to hit ok then I can press on something one time then it locks up for a few seconds until the message pops up again and I hit ok then I can press another button, and I have to keep doing this until I get where I'm going. ( a text message would take 20 minutes to write) the phone locks up until that message pops up. I went into settings and turned off everything that has to do with the pen but no help.
also if anyone still has one of the first CF TAR files if youi could get that to me I could give that a try. i got my phone when it first came out and am still on all the older versions of everything so that might work thanks
Use the previous topic you created for this issue:
http://forum.xda-developers.com/showthread.php?t=2736873
You don't need to create a new topic for the same issue.
krelvinaz said:
Use the previous topic you created for this issue:
http://forum.xda-developers.com/showthread.php?t=2736873
You don't need to create a new topic for the same issue.
Click to expand...
Click to collapse
i understand and I apologize but I need this phone for work so it is very important I get it fixed, My thread is getting no real attention so I was hoping to get the topic back on the first page pus I had more information to add. I wont create another on this topic I promise.. I just really need some help on this. sorry for the inconvenience.