Hi Folks,
i found a trick to make an autoinstall from strorage card (like from extended Rom)!
autorun.exe looks for the file config.txt on the place is in registry stored in:
"HKLM\Comm"
"AutoRunCFG" = "\Speicherkarte\Autoinstall\config.txt"
so i changed the registry entry and now i am able to put config.txt and the files to install on every place i want.
on windows Mobile 2003 devices this works wonderful!
on problem i have now with windows mobile 5 devices:
when installing a question appears where to store files (device or storage card)!
can anybody help me to get rid of this question during automatic cab install??
i want install all cab files to device without any questions!!
pbelcl: apologies for my ignorance, but is this very different to a 2577 folder?
with a 2577 cab we could use this info:
http://forum.xda-developers.com/viewtopic.php?p=225375#225375
and choose a default install folder I think for WM5.
V
Thanks for your quick answer!
i read the other tread and if i understood it right i have to remove the .dll file from my cabs?
i'll try this and tell you if it worked ....
I think the other way round.
I've never done it before, but you need to make a custom cab and .inf file, and specify the installation location in therere, and then the "choose a location" dialog doesn't come up. I'm not sure, I'll try this at home later.
V
vijay555 said:
...I'll try this at home later.
Click to expand...
Click to collapse
Thanks, that would be interesting for me because i cant generate cab files because i hav no developer software for this.
i also have access to a cab file manager (at a customer) where i can edit the cab files and change them as i need it.
if it is possible to generate an "empty" cab file for me that would be nice ....
pbelcl: I never use the cabwizard either, I use cab manager. To make an empty cab, take any normal cab (download one of mine?) and just remove all the files from it. That's what I always do!
V
vijay555 said:
.just remove all the files from it. That's what I always do!V
Click to expand...
Click to collapse
ok, this is also my way to get an empty cab file
there is one question interesting:
Sometimes there is a "CheckFile.exe" and a "CeSetup.dll" in the cab file.
Do i need them for any work during install this cabfile or can i delete them also?
I remove everything from my cabs, and then use cab manager and drag and drop stuff. So I've never used those files. I will have to read up on how to make a "normal", but I don't think they're necessary if you didn't put them in there!
V
Hi folks,
again my last problem with automatic install on WM5 devices:
when my automatism starts to install the cab files (from where ever) each time there comes a popup windows where to install the cabfile (storage card or device).
for my routines it is not important becaue most of my cab files only set some registry keys and dont install files on the device!
Does anybody know how i can get rid of this window and install the files to device WITHOUT question popup window??
So here's the scoop. You got this killer rom, but it loads a whole bunch of stuff that you don't want. You get around this by resetting before the configuration starts after aligning the screen.
You might have a host of cabs that you always load, and after you flash you need to run each one. Every rom you use it's the same thing - flash the rom, then load all your cabs.
Or, you may have a program you want to execute, such as enabling SetHSDPA.
Here's a way to "automate" it so you can use the power and flexibility of the PreConfig funtion as an "after the flash" customization tool, and make subsequent installations much faster.
You'll need a folder on your storage card called CABS, and in that folder put the attached file called CFG.txt as well as the cabs / exe's etc (unless they're already in the ROM, then just point the config file to the correct path) that you want to run. The CFT.txt is the file that will tell it what to install, and is exactly like the PreConfig.txt file - see my extended rom thread for ideas on what you can do with it.
Basically, here's the contents of the CFG.txt file I attached:
LOCK:Enabled
CAB: \Storage Card\CABS\A2DPFix.CAB
CAB: \Storage Card\CABS\ATIFix.cab
CAB: \Storage Card\CABS\Cingular_WAP_MediaNet_MMS_Settingsv2_No_ICON_Change.cab
CAB: \Storage Card\CABS\Google Maps Cell.CAB
CAB: \Storage Card\CABS\Monopoly.cab
CAB: \Storage Card\CABS\NETCFv2.wm.armv4i.cab
CAB: \Storage Card\CABS\S2U2-0.72-WM5.cab
CAB: \Storage Card\CABS\Solitare.cab
CAB: \Storage Card\CABS\StartClean.cab
LOCKisabled
RST: Reset
Just list out your cabs or actions in this file - and be sure the files you are referring to are in the destination path.
To use this setup:
Edit the CFG.txt file and place in \Storage Card\CABS (if the folder isn't there, create it)
Copy your cabs/exes into this folder, being sure they are set to READ ONLY.
Install the attached cab, and after you reset it'll start the installation!
Once the installation is complete and the phone resets - you can remove the program from Settings-Remove Programs.
Important Notes:
Don't forget to make your CABs READ ONLY - or they'll delete after installing. YOU HAVE BEEN WARNED!!!
Ensure that the cabs you're installing does not require any user input. If it does, it will hang the installation process, you'll need to reset the phone, and not all of your stuff will get installed.
Known list of NOT COMPATIBLE files:
MS Reader
Sweet bro!!! I am all over it, will give it a go and let you know my results!!! Very cool stuff!
You Rock!
Downloading Now!
Can I put this on My Treo?
berdinkerdickle said:
You Rock!
Downloading Now!
Can I put this on My Treo?
Click to expand...
Click to collapse
sure, if it's WM5/6.
mattk_r said:
sure, if it's WM5/6.
Click to expand...
Click to collapse
Jokes on Me.
Seriously Though,
This is Great!
mattk_r said:
...clip...
Ensure that the cabs you're installing does not require any user input. If it does, it will hang the installation process, you'll need to reset the phone, and not all of your stuff will get installed.
Click to expand...
Click to collapse
We do want to be sure not to use apps that require a reset.
great! That's what I was looking for recently
Is there a way to get cab files to default to installing on a Storage Card? I'm trying to prevent it from asking me where I want to install it and thus causing this tool from hanging up.
Nevermind, I made a bad assumption (yes, I know what they say about assuming things) that the PreConfig Launcher would hang up waiting for input for where to install something. I just tested it out on a cab that allows a user to override the installation directory and everything worked fine.
Sorry.
kc_hubbard said:
Is there a way to get cab files to default to installing on a Storage Card? I'm trying to prevent it from asking me where I want to install it and thus causing this tool from hanging up.
Nevermind, I made a bad assumption (yes, I know what they say about assuming things) that the PreConfig Launcher would hang up waiting for input for where to install something. I just tested it out on a cab that allows a user to override the installation directory and everything worked fine.
Sorry.
Click to expand...
Click to collapse
You could edit your cabs and have them install to the storage card by default - or at least I think you could. I'm thinking something like %storage card%. If I get a chance I'll poke around WinCE Cab Manager and see if it's possible.
I just tested it by building a cab to install to the folder /Storage Card, and it worked fine.
mattk_r said:
I just tested it by building a cab to install to the folder /Storage Card, and it worked fine.
Click to expand...
Click to collapse
Matt,
While I'm not quite the noob the number of posts would indicate I am, I admit that I haven't done much w/ building cab's. In an attempt to build one to install directly to the storage card, I've used WinCE to alter the default directory and have altered _setup.xml file, both to no avail.
While my pride says not to ask you to tell me how you set the cab up to install to storage, I'm not above asking you to post the example you created to test this so that I can look it over and try to figure this out for myself.
Would you mind attaching a cab file that installs directly to storage for me? Please?
kc_hubbard said:
Matt,
While I'm not quite the noob the number of posts would indicate I am, I admit that I haven't done much w/ building cab's. In an attempt to build one to install directly to the storage card, I've used WinCE to alter the default directory and have altered _setup.xml file, both to no avail.
While my pride says not to ask you to tell me how you set the cab up to install to storage, I'm not above asking you to post the example you created to test this so that I can look it over and try to figure this out for myself.
Would you mind attaching a cab file that installs directly to storage for me? Please?
Click to expand...
Click to collapse
I could - but this is super easy. When you add a file, you get a window with three tabs, one being location. In that tab, you'll have the folder view. Click on the root '/' folder and press 'new folder'. Call it Storage Card.
That's it!
mattk_r said:
I could - but this is super easy. When you add a file, you get a window with three tabs, one being location. In that tab, you'll have the folder view. Click on the root '/' folder and press 'new folder'. Call it Storage Card.
That's it!
Click to expand...
Click to collapse
I must be an idiot to not have been able to figure that out (and my day job is computer programming, albeit on IBM Mainframes). Will work on this again once I'm back home. I'm sure big brother is already not too happy w/ all the time I spend on the forums anyway.
Thanks Matt!
so, if i were flashing a ROM i would flash, install the cab and then, assuming i already have my cabs and config files on my card, i hard reset and this should launch ok?
thanks,
mark
AximMarkSD said:
so, if i were flashing a ROM i would flash, install the cab and then, assuming i already have my cabs and config files on my card, i hard reset and this should launch ok?
thanks,
mark
Click to expand...
Click to collapse
From what I've done/learned no hard reset is required. You install the Pandora PreConfig Launcher and let your phone Restart. When it restarts, your cabs in the CFG.TXT file will be installed.
so after a flash or a hard reset (for whatever reason) you just install the cab and then soft reset and it will install your cabs?
AximMarkSD said:
so after a flash or a hard reset (for whatever reason) you just install the cab and then soft reset and it will install your cabs?
Click to expand...
Click to collapse
correct - as long as your cabs and the configuration file reside in the CABS folder on your storage card
mattk_r said:
correct - as long as your cabs and the configuration file reside in the CABS folder on your storage card
Click to expand...
Click to collapse
right.
thanks. that's a great tool.
pardon the ignorance but i've never played w/ the WinCE cab manager. can i change the default install location on commercial cabs that i've purchased (assuming they require no interaction during install)?
AximMarkSD said:
right.
thanks. that's a great tool.
pardon the ignorance but i've never played w/ the WinCE cab manager. can i change the default install location on commercial cabs that i've purchased (assuming they require no interaction during install)?
Click to expand...
Click to collapse
Yes you can change the default install directory.
Matt,
Thanks for this great program. It makes changing roms SOOO much easier!! When combined with WinCE cab manager, you can autoinstall just about any program. This thread should be stickied.
Quick guide on how to get programs to install to storage card used WinCE Cab Manager. This guide was modified from K's FlexiRom instructions:
Preparing the cabs
---------------------------
- To set the cabs to a static path, install WinCECab Manager.
- Open a cab with WinCE Cab Manager and click on "CAB Information".
- Double click on "Default Install Dir" then select "Installation Directory"
- Change the default install directory to what every use desire. Do this by creating new directories under "/". For most users wanting to install on storage card, change path to "/Storage Card/Program Files/cabname". Before moving on to the next step, make sure that once you make the folders, click the desired installation path and click "APPLY".
- After applying the new default installation path, choose "Do not allow user to select installation directory"
- Check if there "Setup dll" is present under Cab Information. If setup dll is present, delete it off. [this step is from K's instructions, not sure if it is necessary or not. I've been doing it.]
- Save the cab then right click on the can and select "Read Only" and click apply/OK.
- Check and prepare all the cabs you want to auto install and place them into the CABS Folder of your storage card.
PS Using WinCE Cab manager, you can also modify the shortcuts of the program.
Hi,
Where is the location of downloaded but not installed modules?
Please.. I downloaded lots of modules and its a waste 100mb
Bump
@rovo89 pls
Please stop bumping every 9 hours, it's not really helping your case. Have you tried emptying the cache for installer? Have you looking in the app folder for xposed installer. What do you mean you downloaded but didn't install, whenever I download a module, the very next screen is Android's installer, did you press cancel?
"Have you tried emptying the cache for installer? " -- Yes
"Have you looking in the app folder for xposed installer?" -- I don't know what you mean, but i looked for in all folder, internal storage, data and system folder too. Everywhere
"What do you mean you downloaded but didn't install, whenever I download a module, the very next screen is Android's installer, did you press cancel?"
-- Not completely. I downloaded, installted, then deleted. But in the version history it says "Succesfully downloaded, press to install now" and if i press, the package installer comes, so the apk is in the phone. And i tried, i downloaded some modules to test, installed then removed, and i lose ~15mb. So the not installed apk files stored in the device in a secret place.
I bumped this because i think a lot of people know this, but no one replies for this petty thread...
I dont really know how this works but it happens to me sometimes and i usually find the uninstalled modules through Samsungs stock file manager (My Files) it lists the downloaded apks inder Recent Files but as to their location thats unsolved
Use Filemanager
you can find the downloaded but not installed apps by installing a file manager on your device