Hi how come I can not see some posts?
anyone can help me thanks..
vBulletin Message
luxio, you do not have permission to access this page. This could be due to one of several reasons:
1.Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
2.If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
Click to expand...
Click to collapse
A few changes have been created to help the fight against spambots. As such all new members (until they reach 5 posts...used to be 8 but I believe its been reduced to 5) will have some restrictions such as unable to post links, access to certain areas and also their first 5 posts are monitored and approved. Once you have reach this limit these restrctions will be removed.
Thanks for you patience in this matter
Rick
OK: I'm curious why I can't download basic stuff like MTTY, even though I'm listed as a "senior member" with over 100 posts. Insufficient privileges, but why?
I've brought this up in the moderator forum. Hopefully the admins can look into this for you.
Also, try the suggestions I made in reply to your other post.
Ta,
Dave
UncleBeer said:
OK: I'm curious why I can't download basic stuff like MTTY, even though I'm listed as a "senior member" with over 100 posts. Insufficient privileges, but why?
Click to expand...
Click to collapse
i think you need 150+ post
Shazad.K said:
i think you need 150+ post
Click to expand...
Click to collapse
There are new restrictions on posting links / pics etc but there are not supposed to be download restrictions. As Dave said above this has been raised by the Mods and Admin is aware - but I'll check on it.
Mike
thank you i just need to get post counts up
You do not have permission to access this page
I get the You do not have permission to access this page message when I try to view http://forum.xda-developers.com/showthread.php?t=639168 It's the MobilePad thread. Is the whole thread closed or is it about MY account? So far I have 13 posts.
Could someone of the senior members try to view that thread and report back here?
I'd apprectiate it.
Regards MaeSiuS
I can't access that thread too, so the count of posts would not be the problem.
I'd guess that thread got removed for violating forum rule #11:
11. Don’t post with the intent on selling something
Click to expand...
Click to collapse
A removed thread will give you the following warning:
Invalid Thread specified. If you followed a valid link, please notify the administrator
Click to expand...
Click to collapse
The thread has been moved to a restricted internal review section of the forum as it appears to breach Forum Rule #11. The XDA Admins have already been notified.
Regards,
OK thanks for pointing that out.
Related
Dear Admins
The links to the archive does not work.
Its by far the best way to keep up on threads as it is possible to see threads listed by the date they are startet... Never miss anything
A typical link is: http://forum.xda-developers.com/archive/index.php/f-260 /DEV/HACKING section...
Could someone please get it back.
Martinhdk said:
Dear Admins
The links to the archive does not work.
Its by far the best way to keep up on threads as it is possible to see threads listed by the date they are startet... Never miss anything
A typical link is: http://forum.xda-developers.com/archive/index.php/f-260 /DEV/HACKING section...
Could someone please get it back.
Click to expand...
Click to collapse
Sorry to sound like an arse, but what's "does not work" mean?*
I can access it fine, also putting .html on the link gives a different view : http://forum.xda-developers.com/archive/index.php/f-260.html
*I'm a programmer, I get so many bugs saying stuff doesn't work.
Dave
Martinhdk, thanks for reporting it. We did have an issue with this earlier and it has been fixed since.
Have seen this on other type forums, but haven't figured out yet, how does it work here.
Redirecting to some part of text in one post can be done via anchoring. At least it was so on SMF forum.
There I used [iurl=#sometext][/iurl] for the link and [anchor=sometext][/anchor] for the place, where it has to redirect to.
Now, this is not SMF and I haven't found a working way for this. HTML and PHP codes, which I also have tried, do not work. If I try [ HTML] and [ PHP], then these comes in the boxes.
This is, where is the link
HTML:
Text to be shown
and this is, where it should direct to
HTML:
<A NAME="anchor">Text to be shown</A>
You get the point, right?
Is here a way to get it working also? I have a tutorial, which is already quite long, but not complete yet. It would be easier for readers to just click the part of the tutorial they want instead of scrolling through bunch of text.
Someguyfromhell said:
Have seen this on other type forums, but haven't figured out yet, how does it work here.
Redirecting to some part of text in one post can be done via anchoring. At least it was so on SMF forum.
There I used [iurl=#sometext][/iurl] for the link and [anchor=sometext][/anchor] for the place, where it has to redirect to.
Now, this is not SMF and I haven't found a working way for this. HTML and PHP codes, which I also have tried, do not work. If I try [ HTML] and [ PHP], then these comes in the boxes.
This is, where is the link
HTML:
Text to be shown
and this is, where it should direct to
HTML:
<A NAME="anchor">Text to be shown</A>
You get the point, right?
Is here a way to get it working also? I have a tutorial, which is already quite long, but not complete yet. It would be easier for readers to just click the part of the tutorial they want instead of scrolling through bunch of text.
Click to expand...
Click to collapse
This isn't currently available at XDA, but one way you can do it is to break your guide/tutorial into sections, and put each into a separate post, and hotlink to the post directly.
You can get the permalink from the post number at the top right (copy the target URL)
pulser_g2 said:
This isn't currently available at XDA, but one way you can do it is to break your guide/tutorial into sections, and put each into a separate post, and hotlink to the post directly.
You can get the permalink from the post number at the top right (copy the target URL)
Click to expand...
Click to collapse
My tutorial already has answers in the topic, neither is it ready yet. Adding new posts between other posts is, according to me, not possible.
Someguyfromhell said:
My tutorial already has answers in the topic, neither is it ready yet. Adding new posts between other posts is, according to me, not possible.
Click to expand...
Click to collapse
We can inject posts for you relatively easily if needed
pulser_g2 said:
We can inject posts for you relatively easily if needed
Click to expand...
Click to collapse
If you offer that...I could use some.
I would like 2 posts there, after my first post.
Link to the tutorial is in my signature, first link.
pulser_g2 said:
We can inject posts for you relatively easily if needed
Click to expand...
Click to collapse
Is this offer still available? I need few posts(2-3) there, right after the first post.
Just ran to 30000 character limit, even though I am far from finished with it
Someguyfromhell said:
Is this offer still available? I need few posts(2-3) there, right after the first post.
Just ran to 30000 character limit, even though I am far from finished with it
Click to expand...
Click to collapse
Done
the_scotsman said:
Done
Click to expand...
Click to collapse
Thanks, I really appreciate this
I own a LG d620r (europe) with LINEAGEOS 14.1(BUILD 14.1-20171128-NIGHTLY-g2m) combined with supersu and have some issues while Booting.
When I boot the Phone, i get the regular boot animation. After about 5 Seconds the Screen brightness goes down to about 10%. Same happens when I use Chainfire LiveBoot. How can I change the brightness during boot so the LiveBoot output becomes readable to me?
Brightness change is not affected by the SuperSu-Binary, also happens with clean Lineage.
Thanks in Advance.
9hax
9hax said:
I own a LG d620r (europe) with LINEAGEOS 14.1(BUILD 14.1-20171128-NIGHTLY-g2m) combined with supersu and have some issues while Booting... /QUOTE]I don't have this device but, your best bet is to post this question within the following Official LineageOS thread for your device.
https://forum.xda-developers.com/showthread.php?t=3529585
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Ibuprophen said:
9hax said:
I own a LG d620r (europe) with LINEAGEOS 14.1(BUILD 14.1-20171128-NIGHTLY-g2m) combined with supersu and have some issues while Booting... /QUOTE]I don't have this device but, your best bet is to post this question within the following Official LineageOS thread for your device.
https://forum.xda-developers.com/showthread.php?t=3529585
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Sorry, because of a formatting error, i didnt see your messaage, thanks, will do.
9hax
ps. how do i close a thread?
Click to expand...
Click to collapse
9hax said:
ps. how do i close a thread?
Click to expand...
Click to collapse
1) On the first post, select the bottom left triangle (reporting a post).
2) When the next page loads, select the reason on drop down section (at the bottom left of the text area), then select the one that states "Thread/post moving or maintenance".
3) If it's because your question was simply answered, then type the reason within the text area. Something simple like "Can you please close this thread because my posted question has been answered." (you can also tell them that "Ibuprophen is awesome" LOL!).
4) Finally, select the "Send report" and you'll then be taken back to the thread. Your all set!
The report is then listed on cue for a Moderator. It typically takes anywhere from 10 min to a day or two. The Moderators are very good and are pretty much on top of things.
Reporting a thread isn't intended as a bad thing. It just elevates having to send call-outs and PM's to a bunch of Moderators till one is available.
You've now graduated from the "Closing a thread 101" course! LMAO!!!
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Thread closed as per OP request.
Matt
Senior Moderator
I publish a firmware update (for Xperia M2) every month and edit the first post.
After editing on May 25, the whole topic disappeared.
Nobody sees her, I only see her in my subscriptions - but I can’t open it (you do not have permission to access this page.)
I checked it now on another topic - the topic also disappeared, after the Edit project.
f2065 said:
I publish a firmware update (for Xperia M2) every month and edit the first post.
After editing on May 25, the whole topic disappeared.
Nobody sees her, I only see her in my subscriptions - but I can’t open it (you do not have permission to access this page.)
I checked it now on another topic - the topic also disappeared, after the Edit project.
Click to expand...
Click to collapse
Is this the thread you are referring to?:
https://forum.xda-developers.com/xperia-m2/rom-lineageos-14-1-t3919879
Mike
MikeChannon said:
Is this the thread you are referring to?:
Click to expand...
Click to collapse
No (there the firmware will be compiled in a few days, so I have not edited this topic yet).
Missing topics here:
https://forum.xda-developers.com/showthread.php?t=3919890
https://forum.xda-developers.com/xperia-m2/recovery-twrp-3-3-0-development-t3923414
f2065 said:
No (there the firmware will be compiled in a few days, so I have not edited this topic yet).
Missing topics here:
https://forum.xda-developers.com/showthread.php?t=3919890
https://forum.xda-developers.com/xperia-m2/recovery-twrp-3-3-0-development-t3923414
Click to expand...
Click to collapse
Agh, ok. Well I've notified our server people as I don't have permission to view either
Mike
When will the problem be fixed? How to publish firmware now? Forget the lost topics and make new topics?
f2065 said:
I publish a firmware update (for Xperia M2) every month and edit the first post.
After editing on May 25, the whole topic disappeared.
Nobody sees her, I only see her in my subscriptions - but I can’t open it (you do not have permission to access this page.)
I checked it now on another topic - the topic also disappeared, after the Edit project.
Click to expand...
Click to collapse
f2065 said:
When will the problem be fixed? How to publish firmware now? Forget the lost topics and make new topics?
Click to expand...
Click to collapse
Sir, I apologise that it took a while but the web gurus were able to create a fix that seems to have solved the problem.
Please have a look; as far as I see your "lost" threads are back.
Stay safe and stay healthy!
Regards
Oswald Boelcke
https://androidfilehost.com/?fid=8889791610682937888
Has anyone tested this yet?
THREAD CLOSED
@mak7lindya As per the Forum Rules, links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source. Additionally, the website you linked forces registration to download.
Regards,
shadowstep
Forum Moderator
mak7lindya said:
MOD EDIT: Link Removed
to download, you need to register on the site
https://4pda.ru/forum/index.php?showtopic=887150&view=findpost&p=99856201
Click to expand...
Click to collapse
I checked. No, you don't.
Thats really great but can you post some results give us a little bit of info, have you tested this yourself?