Imate JAMA Flashing Problem! - Upgrading, Modifying and Unlocking

I am using Imate JAMA. Yesterday I was start to upgrade WM6 ROM for my device through memory card, but after finished update OS message another massage is come like "CFC of CP partition not matched". After that nothigs happenig.
Please urgently help me to get my device back to full working condition.

Please anyone give me solution for this problem.
Please help me.............................................

Here : http://forum.xda-developers.com/showthread.php?t=574627

Thank you for reply me.
But i follow the steps too in your link that also not worked.
After update OS phone going to restart and another massage coming "Failed to Download Process" after nothings happening.
Please help me...

Still i am stucking with my device.
But I was tired with all Imate JAMA posts to find the solution.
So Please any one help me to recover my device, Please...
It is very important for me to recover my device, So again please help me anyone.
It is my kindly request...

Related

*************O2 MINI DEAD***********

Hello
I tried upgrading ROM for O2 mini inthis process iam left with only a blank screen with ** USB , Ver 1.00
Please help me out with this problem
I even dont have the rom Backup on to My SD card.
Please Help ME **
have this problem, too can anybody help pleaseeeeeee!!!!!!!!!!!!
What kind of upgrade did you do, sd-flash or shipped-rom? You're now stuck in bootloader.
So try a reset first, maybe it boots. If not put it in bootloader again & do a shipped-rom upgrade (again). If this fails & you still got warrenty use it.
Regards, M
had problem on k-jam, first upgrade just stopped.
started again and all upgraded ok, just restarted the upgrade program.

Universal unlocking problem - plz help!!

Hi all!
I have a big problem with my MDA Pro, so I'll apriciate all help that you can give me!
I tried to remove simlock and I flashed 0.00.00 Rom and everything went fine. But then, when I rebooted my device on boot screen I see "No GSM" and can't flash my radio rom again, it just says "Updating radio rom - please wait" and after some time it aborts flashing. Everything else is working fine, all other PDA functions, but my phone is dead... I had original T-Mobile rom instaled on my device and bootloader 1.01.
Plz help guys, don't know what to do!!

help me plz i am stuck in os screen after try to update from schapes 3.3 to 4.0

hi plz every one who can help me it very urgent..
i try to upgrade my friend htc hermis but i am stuck in os menu
previusly i install scap rom 3.3
i treid to install the new version it reached 2% and the an error massege appear (connection error) then i tried to do it again but evry time i try the same maasege appear on the phone (coonection error )
it reach 0% and this message appear
i have spl 1.09
i also tried to hard spl it but still the same message ...
i treid different usb and pc but still
i download an official rom the same message
i sleep a see the same f*cking message
plz help me
IT Would help if you Gave the Error Message # for Example If your Getting Error Message 240 It's a Connection Problem.
Try Turning of your Firewall, Have the Rom you are upgrading to in your Root Directory And Always Make sure your Phone is Super CID unlocked.
Hope This Helps.....I"ve been where you were at once... IT was the My Firewall for me.
Try flashing your Operator rom using the SD card method. Or looking at the Unbrick table done by POF. It's all in the WIKI...
halder said:
hi plz every one who can help me it very urgent..
i try to upgrade my friend htc hermis but i am stuck in os menu
previusly i install scap rom 3.3
i treid to install the new version it reached 2% and the an error massege appear (connection error) then i tried to do it again but evry time i try the same maasege appear on the phone (coonection error )
it reach 0% and this message appear
i have spl 1.09
i also tried to hard spl it but still the same message ...
i treid different usb and pc but still
i download an official rom the same message
i sleep a see the same f*cking message
plz help me
Click to expand...
Click to collapse
Try booting in debug mode (hold the Side OK button + power button and reset at the same time)
once you booted into that 4 colored screen with SPL/IPL listed, flash the device with HardSPL 0.7
Link Here
Then upgrade your device again.
using HardSPL it ensures your device will not be overwritten with bad blocks and it enables unsigned rom files to be written to the phone. it's a win-win if you upgrade it.
still the same message 262 update error.
i triecthe hard spl but s6s error always appear
i can go to boot screen
plz if there solution tell me..
its not afirewall fault..
halder said:
still the same message 262 update error.
i triecthe hard spl but s6s error always appear
i can go to boot screen
plz if there solution tell me..
its not afirewall fault..
Click to expand...
Click to collapse
This 262 Error Message I got this
""ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.""
At this Point I"m Stumpped I"m hoping one of the Big Boys Will Step in on this one and give you a better Solution....
yes it reached 2% then it stuck there i treid to reupgrade with the same rom no luck..i tried different rom also ..
do u think if i download a shiped htc rom it will work
halder said:
yes it reached 2% then it stuck there i treid to reupgrade with the same rom no luck..i tried different rom also ..
do u think if i download a shiped htc rom it will work
Click to expand...
Click to collapse
Wam7 has already given the best advice to start unbricking your phone.
1. Get the original Rom which came with your phone. It might be listed here http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades or here http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions. If it is not listed you'll need to search the internet and/or this forum.
2. When you have your original ROM, flash it to your phone from the SD card, not from your computer. Instructions to do this are here http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing. Remember to have a full battery charge before beginning.
Hopefully this will recover your phone. If it does, then make sure that you flash Olipro's HardSPL 2.10 (V7) to your phone http://forum.xda-developers.com/showthread.php?t=296722.
If you get stuck on how to do this correctly, there is some good advice in Mrvanx's upgrade guide http://forum.xda-developers.com/showthread.php?t=299462.
Also, in the future it can help others to help you if you give more information about your phone such as phone type, original ROM, current Rom, Radio version, SPL version etc, etc. Most people include some of this info in their signature so they don't have to keep re-typing it.
thank you very much for replaying...
i tried the sd card method and i download my exact cid rom but still it give the error 0068002 i download more than 5 original shiped rom same message
my phone is htc ...tytn ..not qtek or dopod ....
htc pure
info
r 1.18.00.10
g 32.55.7018.01h
d 3.57
m05 s04 b06
any other solution
i can go to boot menu
plz again
i tried evry possible way to flash my phone but i cannt get it done why??? EROOR 262
i download more than 10 official rom (htc) and i apply the exact sd method steps still it give me 0028002 error
my device is HTC ...BUT HTC WHAT I DONT KNOW...IT JUST HTC ONLY
SO I CANNOT CHOOS MY EXACT CID ROM
PLZ HELP ME OR I WILL THROUGH IT AWAY
plz answer me its very urgent?????
ok i dont want to open a new thread with same question.so if some one plz can help i will be graetful....
i want to knew how to fix error 262
Have you tired flashing from the bootloader?
Have you tired flashing just the rom from mitty ?
Is the phone unlocked? Have you thoroughly read the unbricking thread in the wiki?
WB
i dont know if its unlocked but i flash it with chap 3.7 a then i tried to flash it with chap 4.00 it reach 2% and stoped..ofcouse its unlocked..
it tried the mitty way but it give
level=ff instead of 0
and bad command
it tried the sd card method the error 0068002 or invalid vender id
If you get invalid vendor error doesn't that mean the phone is locked?
since no one helped me here in this thread ...i helped my self..
i found the solution...i send my ID to htc.com and they replay nicey and send me the link to my exact cid rom ..
the problem was my original rom was norway not wwe ..**** who thought that???
anyhow thank you for all who tried to help me..really i benfit from thier method for future desaster???
see u in another problem...
cuz we know nothing we just ask and ask until we find the solution ..

help o2 got stuck during rom update

hi! friends need an urgent help plz while i was updating the rom my o2 got stuck with some blank screen written with "SERIAL" on the top and "VS1.02" at the bottom plz help how to get back my phone software
simple steps first: Have you performed a manual soft reset? If so then please list everything you have done/tried so we are not reinventing the wheel in trying to help.

please help

i am trying to paste over karmba 12.0 WM6.1 the new 6.5 for trinity and every time i have the message for error. please help
what error?
Try being more specific.. What error message? When do you get it? Is your phone currently working or is it bricked?
Have you tried putting your phone in IPL mode (power,camera,reset button) and then try?
If all fails- download original HTC ROM. It will install WM6.0 on your phone , and maybe mess up with your radio, but it will bring the phone alive and then you will be able to put another cooked ROM on.

Categories

Resources