how to install rom when my phone is dead - Upgrading, Modifying and Unlocking

hi, i have asusu p552w mobiel phone and i have tried to update my firmwire version from 5.4 to 5.12 it was going smoothly and suddenly the power gone so the pc got off and my upgrade halt in between and now my phone has no bootrom it says update failed please update again and my windows doesnt recognise my phone now. so how to install the rom without connecting to windows when my phone is dead
please help me

Related

HELP: Trying to get USB to work under bootloader to recovery botched ROM update

Hi guys,
I tried to upgrade my rom to BSB WM6.5G I have been running several versions of 6.5 with no issues. This time I am away and am using Windows on a Mac. I tried to use VMware with XP the tfirst time and it sat at 0% and didn't move (XP also tried to add the phone as new hardware during the update, not a good sign). I went into the recovery mode of the customruu that got me back to the bootloader but it still couldn't run the rom update.
Now I am running windows under bootcamp and I can't get the bootloader to recognise the USB. Everytime I connect I get XP trying to find drivers for the Qualcomm chip. Does anyone have any ideas about how to get the bootloader screen to go into USB mode so I can reflash the rom?
Thanks for any help
SOLVED
Kind of embarrasing..... The version of XP I am using to try and recover it didn't have active sync installed. Installed that and all is well. Note to self, dont use VMware to flash ROMs
SOLVED
Problem solved...
@ mods: plse close this Thread

Bootloop after Xposed install, Hard Reset not working

Hi there,
i rooted my G3 using Towelroot and all worked fine.
Today i installed the actual Version Xposed Framework and after rebooting it entered a Bootloop.
So i tried to Hard Reset my G3 but when i confirm it the Android with the Gaers show up for a second and then my G3 keeps showing the LG Logo for a few Minutes till i disassamble the Battery.
Next step i try is to flash a firmware in Download mode, but i cant get the Drivers to work... =(
Someone have some hints for me?
patrickn2282 said:
Hi there,
i rooted my G3 using Towelroot and all worked fine.
Today i installed the actual Version Xposed Framework and after rebooting it entered a Bootloop.
So i tried to Hard Reset my G3 but when i confirm it the Android with the Gaers show up for a second and then my G3 keeps showing the LG Logo for a few Minutes till i disassamble the Battery.
Next step i try is to flash a firmware in Download mode, but i cant get the Drivers to work... =(
Someone have some hints for me?
Click to expand...
Click to collapse
Have you choosen ART modality?
If i would say "what the hell is that" ... would u slap me?
No.. i dont have chosen that..
Bigger problem is that i dont get any usb driver working for firmware update in Download mode.. =(
OK... i managed to get the drivers working.
But further Problem ist now that im not able to flash anything on my device...
Neither the TOT Method, nor updating with the Original LG Support Tool is working...
Support Tool tells me my Model Number and that my Version is most actual.
If i update anyway it stucks at 4% and tell me it cant connect.
TOT Tool tells me that my Version Number is not correct... but it is..
With the KDZ Update Tool it stucks at 4% like the Original method.
Same problem here
Any one can help us?
Solution
Hi there,
the Problem was my PC...
I was on a Windows 8.1 64bit.
Switched to a Win7-PC and all is working fine.
You should try to use the Original LG cable, or another "Original" Cable and connect it to a USB-Port on the Back of your PC (directly to the Mainboard)
On a blank Win 7:
- I installed the LG PC Suite
- Updated the PC Suite
- Connected my LG in Download Mode
- Let the PC install all drivers,
- Disconnected the Phone
- Downloaded the actual LG Mobile Support Tool
- Let the Support tool do the work
After this i got my first OTA Update and its working like a charme

lg g3 d855 in a very strange problem

Hi
am having a very strange problem with my phone, first it was the sim not working, until I continuously remove an install it again and again,
it was first runing on android 5.0 fully OTA updated.
However in a try to resolve the problem, I connected it to LG pc suite in order to get the android 6 ! it was working for a day, but it suddendly it stopped and went OFF for ever.
Thanks to a thread here in the forum, I Hard bricked it then soft bricked it with kitkat 4.4, it worked without any problem, but when the auto updates went to lolipop 5, it stopped again.
I installed marshmallow 6 with flashtool, the phone is working with the SIM without Internet with no problem, but, when I connect it to the net, and specially when I enter my gmail account it goes to the same loop again, and I have to flash it to return back.
Please Help.
Check which version of gapps your using... That's the only thing I can think of

help me please

please help me..
a few days ago I installed on my galaxy a3 2017 a custom rom but now I want to reinstall the official samsung software and so I took my computer and I tried to install it with odin. The memory was full and installing the software all's gone wrong and now when I try to go to recovery mode o something else like the download mode my phone shows me "an error has occurred while updating the device..." I've tried to use the emergency recovery in the smart switch on my pc but, even if I install again the drivers the computer doesn't recognize my phone. I'm going in panic please help me soon.. I need it
hi
i have your issue but when phone turned off i can go to download mode and install new firmware and its ok
smart switch emergency recovery cant do anythings and dont use it!!!!
try adb if you can
Ale2001_03 said:
please help me..
a few days ago I installed on my galaxy a3 2017 a custom rom but now I want to reinstall the official samsung software and so I took my computer and I tried to install it with odin. The memory was full and installing the software all's gone wrong and now when I try to go to recovery mode o something else like the download mode my phone shows me "an error has occurred while updating the device..." I've tried to use the emergency recovery in the smart switch on my pc but, even if I install again the drivers the computer doesn't recognize my phone. I'm going in panic please help me soon.. I need it
Click to expand...
Click to collapse
Where is that custom rom?

asus 5Z still on android 8.0, how to update

I have a peculiar problem, somehow my 5Z has stuck on Android 8, problems started when i was trying to install android 10 beta version(phone bricked and i downgraded to 80. version to recover phone) and iam unable to update since then, if i manually put update.zip in root folder. system recognizes and updates the phone but after restart giving update failed error , I lost mobile signal too with any sim. After multiple failed attempts, i decided to root and unlocked the boot loader, now iam getting a red warning whenever i restart my mobile. How to update to latest android version and get back mobile signal. thanks

Categories

Resources