Develop Bugs

4GB SDHC card on WM5 XDA Orbit

Hi Everyone,
I have Xda Orbit by O2 bought in 2007, used it for only few months and since then it's been sat there in the box, have just started using it again and needed to put a bigger card (I have never used any memory card in it, and it dosn't even detect my SanDisk 4gb SDHC), now after all the search, it says i'd have to put a newer version of windows mobile in it, mine one is on WM5.
O2's website won't provide me with an update as they only have new XDA's listed on their website. upon my research i have found out on this forum that by putting this file called "SDHC-Artemis.cab" would make SDHC 4gb up and running, now the question is will this .cab file work on WM5? Where from i get it and how do i install it?
Plus any suggestions on how can i upgrade my WM5 to WM6 as i don't have any genuine copy of it, are the ones available around some cracked versions or something?
Many thanks in advance!!!

did u get your phone from the UK??
try this thread....I just flashed it today, works perfectly!
http://forum.xda-developers.com/showthread.php?t=455130
You may want to upgrade the radio rom to 3.34.90
...and I have no idea about the SDHC issue.

Thanks Klee, Yes i bought the phone from UK around Jan, 2007. Just called O2people but they said they can't do anything, which was very bad, and we can't even go to the manufacturer.
Sony Erricsson provides 3 years manufacturer's warranty even after your service provider stops.
well, have you tried putting in any bigger memory card after you have put WM6 in your phone?
which installation process did you follow, any tips? shall i use AutoSync which came with the phone originally?
Many Thanks for your help, Much Appreciated!!!!
by the way Would i have to Crack this windows or is it ready to go or something?

Basically first install activesync, run activesync and connect your phone to the computer
wait until your phone finishes syncing and all that, double click the exe file you downloaded in the thread I gave you earlier.... follow the instructions, after ~10 minutes, a working wm6 phone!
This is the official upgrade, so there is no need to unlock the phone first.
about the sdhc issue....I've never tried anything over 1GB, as I don't have the need for a bigger card, so I've no idea. I believe there is an SDHC cab somewhere floating around here, try searching for it
Hope this helps.

Thanks a lot mate,
this surely and definitely is helpful, i have downloaded the file, but haven't put it on the phone yet, as i don't have any spare phone for "just in case".
once i get a cheap standby phone i'll install it, very much looking forward to it.
and yes, i have thoroughly searched about the SDHC issue, and there is a patch available which i'll run once i have got WM6 sorted!
Kind Regards!!

Xda orbit rom download link please
Hi did u flush your xda orbit with windows mobile 6 if yes which one because on the site it don’t show the xda orbit, (which rom shall I select) , if yes can u provide the link to download the rom please, also after flushing with wm6 lot of people on the forum claiming problem with wifi, gps, and Bluetooth one or the other , have u had any problem with any of this, please help will be appreciated thanks

Hi klee,
I have managed to put the newer version of windows you suggested onto my phone, and it seems to work fine, have got my 4gb MicroSD card working too, by the help of above .Cab file i mentioned. can't manage to stream videos despite of trying several different utilities, i have installed .Net framework as well but still can't run the Cab files, any suggestions?
Best Regards,
Ahsan

can you upgrade to wm 6.1 by bluetooth

i lost the ablity to snyc by usb somehow but i can use bluetooth to move files around and whatnot. i appear also to have lost my camera controls also.i got this from a buddy heading out to the frontier(afganistan) any ideas on how to bluetooth an upgrade

Not possible. Try the memory card way if it exists for the Excalibur.

but it mentions that you have to be connected by usb

warlock123 said:
but it mentions that you have to be connected by usb
Click to expand...
Click to collapse
No, get a card reader, put the image file on it (rename it per the instrucitons) and enter bootloader.

ok my newbiness is showing like a solar flare,which 6.1 are you talking about.
also from the theads that i read it appears that for each advance the risk of losing things like cameras go up.oh well no risk no fun

please explain that last post someone.if i'm understanding you correctly i download to my sd card the upgrade program and let it runs

warlock123 said:
please explain that last post someone.if i'm understanding you correctly i download to my sd card the upgrade program and let it runs
Click to expand...
Click to collapse
Flashing from SD Card?

From Android to Win 6.5

Hi, I installed android to my touch but now I'd like to go back to window mobile. I haven't been able to figure out how to flash it back to windows... any help?
Thanks

reflash a winmo build.

I'd love to reflash to a winmo build, but i just don't know how.

search. read the wiki's @ the top.
why go back anyway?
Sent from my HERO200 using the XDA mobile application powered by Tapatalk

Long story short. i'm trying android again to see if the newest build has better battery life. the last build couldn't hold a charge long enough to make it worht while as a phone.
The only way i've ever gotten android to get data after being flashed has been to get it working in windows first and then installing android.
i've read and searched for a step by step on how to do this and i just haven't been fruitful.

just download and flash one of the 6.5 builds....there's a very informative guide on how to

The guides that i see want me to establish an active sync connection to flash the device but I have android installed and i cant' establish an active sync connection. I think thats my major hangup. Is there a way to flash it from the memory card?

not that Im aware of.. my have to RUU back to stock and start over.
look here for sprint rom http://shipped-roms.com/shipped/Vogue/

That would be just fine too... i still don't know how to do it. When i run the rom update utility it gives me a connection error.
Edit: I realize that i'm being vague. Let me try to fill in the gaps. I am putting my phone into the bootloader mode, hooking it up to my PC via USB and running the Rom update Utility with a custom rom. The phone has been unlocked so it really shouldn't have any trouble..
What am I doing wrong?

moperist said:
The guides that i see want me to establish an active sync connection to flash the device but I have android installed and i cant' establish an active sync connection. I think thats my major hangup. Is there a way to flash it from the memory card?
Click to expand...
Click to collapse
Put your phone in Bootloader Mode by pressing the Camera and Power buttons and then the Reset button all at the same time.
Then make sure you have a radio of 3.4x or above... If not Flash back to a new stock Rom and then follow the threads you were just reading.
If you radio is good go and Download one of the ROMS here on this forum.
Happy Flashing!
P.S Please Ask your Questions in the Q and A section of this forum.

moperist said:
That would be just fine too... i still don't know how to do it. When i run the rom update utility it gives me a connection error.
Edit: I realize that i'm being vague. Let me try to fill in the gaps. I am putting my phone into the bootloader mode, hooking it up to my PC via USB and running the Rom update Utility with a custom rom. The phone has been unlocked so it really shouldn't have any trouble..
What am I doing wrong?
Click to expand...
Click to collapse
Make sure it says usb at the bottom of the bootloader.

Ok, I found out the problem... i'm retarded.
Thank you for your patience. Sorry to have been a bother and put this in the wrong place.

moperist said:
Ok, I found out the problem... i'm retarded.
Thank you for your patience. Sorry to have been a bother and put this in the wrong place.
Click to expand...
Click to collapse
No problem.
Glad you got it figured out!

moperist said:
Ok, I found out the problem... i'm retarded.
Thank you for your patience. Sorry to have been a bother and put this in the wrong place.
Click to expand...
Click to collapse
No bother....learning experience.

so what was the problem?

so what was the problem because I'm trying to get from android to win 6.5 and the computer is saying that my xv6900 isn't hooked up even though on bootloader it says usb...any help would be great

How to Flash a Vogue without ActiveSync
How to Flash a Vogue Without ActiveSync
A method so easy my Mother could do it.
Not suggesting there's anything wrong with my mother, just that she's not all that technically oriented.​
Here's an easy way to flash your HTC Vogue without using ActiveSync. It would likely be a great method to use if you had many Vogues that all needed to be updated as well. Works great for those not using Windows, as well.
Look around for a Transflash (aka MicroSD) card, one that you can erase, 2GB or less.
Use your Windows machine to make sure it's freshly formatted as FAT32]
Copy the ROM you want to flash to the card.
Rename the file you just copied to VOGUIMG.nbh If you are flashing a different model, you need to be sure you have the right file name for it. I think the pattern is the first 4 letters of the model name with IMG.nbh after it, but if it doesn't work, don't blame me,
Put card in phone.
Enter bootloader mode by holding the CAMERA and POWER buttons, while pressing the RESET button in the little hole in the bottom of the phone. (don't bother to connect it to your computer)
Enjoy a caffinated beverage of your choice, or an alcoholic beverage of your choice, or heck, a nice tall glass of cool water while you wait.
Watch as your phone automagically flashes itself!
Congratulate yourself on a job well done.
This is what I'm going to use from now on for flashing with a Mac or Linux. For those addicted to flashing, you can even take a collection of cards with you. I'm not yet sure if you can have multiple ROMs on one card, and just rename the one you want to flash or not yet, but I'll likely find out soon.
ATTENTION:
Missing any of these will make it NOT WORK:
Card must be normal SD, not SDHC or XDHC. No bigger than 2GB
Card must be formatted with FAT32. They often come formatted FAT16 or plain FAT, and a previously-used card could have just about any format on it -- NTFS. HPFS. HFS+. EXT3 -- Format it right to be sure.
Be sure you have the right name. I've heard that CaSe cOuNtS -- the name above has been cut/pasted from a working reflash card.
There is no #4.
Have fun!
Oh yes, just in case:[Lawyer]You are responsible for your own actions. This information is provided as a public service, and I wave all responsibility for it's correctness or how it is used. If you brick your phone, it's your fault. If your phone explodes, not my problem, but I'd like the remains.[/Lawyer]

Gr1zz said:
How to Flash a Vogue Without ActiveSync
A method so easy my Mother could do it.
Not suggesting there's anything wrong with my mother, just that she's not all that technically oriented.​
Here's an easy way to flash your HTC Vogue without using ActiveSync. It would likely be a great method to use if you had many Vogues that all needed to be updated as well. Works great for those not using Windows, as well.
Look around for a Transflash (aka MicroSD) card, one that you can erase, 2GB or less.
Use your Windows machine to make sure it's freshly formatted as FAT32]
Copy the ROM you want to flash to the card.
Rename the file you just copied to VOGUIMG.nbh If you are flashing a different model, you need to be sure you have the right file name for it. I think the pattern is the first 4 letters of the model name with IMG.nbh after it, but if it doesn't work, don't blame me,
Put card in phone.
Enter bootloader mode by holding the CAMERA and POWER buttons, while pressing the RESET button in the little hole in the bottom of the phone. (don't bother to connect it to your computer)
Enjoy a caffinated beverage of your choice, or an alcoholic beverage of your choice, or heck, a nice tall glass of cool water while you wait.
Watch as your phone automagically flashes itself!
Congratulate yourself on a job well done.
This is what I'm going to use from now on for flashing with a Mac or Linux. For those addicted to flashing, you can even take a collection of cards with you. I'm not yet sure if you can have multiple ROMs on one card, and just rename the one you want to flash or not yet, but I'll likely find out soon.
ATTENTION:
Missing any of these will make it NOT WORK:
Card must be normal SD, not SDHC or XDHC. No bigger than 2GB
Card must be formatted with FAT32. They often come formatted FAT16 or plain FAT, and a previously-used card could have just about any format on it -- NTFS. HPFS. HFS+. EXT3 -- Format it right to be sure.
Be sure you have the right name. I've heard that CaSe cOuNtS -- the name above has been cut/pasted from a working reflash card.
There is no #4.
Have fun!
Oh yes, just in case:[Lawyer]You are responsible for your own actions. This information is provided as a public service, and I wave all responsibility for it's correctness or how it is used. If you brick your phone, it's your fault. If your phone explodes, not my problem, but I'd like the remains.[/Lawyer]
Click to expand...
Click to collapse
i do as yousay after i put it in bootloade mode it says loading for a split seconde then goes back to bootloader i need help i have android with no data i read that i need to reinstill wm get data working their then re install android i cant get wm back on this phone im going on 3 days trying to flash this yes its unlocked

Unable to use SD Card

I started a thread elsewhere and have been advised to put it here for a speedy resolution...
http://forum.xda-developers.com/showthread.php?p=9785290#post9785290
In essence, I have an HTC TP2 running WM 6.5 Pro supplied by Vodafone here in the UK. I have an 8Gb SD card (unknown manufacturer) formatted to FAT32. On the card I store all my WM apps, plus all my folders with files, docs, pictures, video, etc.
On the card I installed Ubuntu and XDAndroid via the 2.2 Froyo.112210 cab
The Ubuntu worked fine, The XDANDROID looked great and on the face of it worked fine too, until I tried to set the ringtone. I realised I was missing calls and notifications because it was on Silent, and I could not change it. I tried to open my music and videos, but the apps said i had no SD card. I checked memory in Settings and it stated that the SD card was mounted, but gave no size info and would not let me Unmount it. I then tried to search media on the card and had no joy. In essence it did not seem to recognise the card.
I then bought another SD card, this time a Kingston 16Gb already formatted to FAT32, added all the files and docs, it too would not work. I have since been round and round the loop of deleting both SD cards, reformatting to FAT32 using both my default Ubuntu app on my Laptop, gParted via my Laptop and the phone. None work.
I now am still on WM 6.5 because I can not use the phone.
I have searched Google and the Forum, and other than formatting to FAT32 I have seen nothing that can help, but that may just be my searching skills.
It has been suggested that some makes of card do not work also.
Other things that I have found a problem:
The keyboard does not light up when I use it, which is impossible poorly lit rooms, etc
Can't find a way of viewing folders, I'm sure there will be more once I get it going...
Any help, please!!!!!

Format with the HP tool. Full format.
Keyboard backlight doesn't work in Linux/Android yet. We're working on it...
Can't find a way of viewing folders...? Astro, OI File Manager...? There's a ton.

My experience is SD Card cannot be used if you installed xdaandroid with CAB version. I tried for the whole night, formatted my card with many different tools - without luck.
At last, I downloaded the zip one, and finally, it works!
Hope it also works with your

hadobac said:
My experience is SD Card cannot be used if you installed xdaandroid with CAB version. I tried for the whole night, formatted my card with many different tools - without luck.
At last, I downloaded the zip one, and finally, it works!
Hope it also works with your
Click to expand...
Click to collapse
Thanks for the tip. I'll try that. It makes more sense. I can't believe taht formatting using different tools can work as a FAT 32 is a FAT 32.... if not then what is it.
Can you tell me. Did you download to laptop, extract and then just copy the files on to your TP2 SD card....?

jonners59 said:
Can you tell me. Did you download to laptop, extract and then just copy the files on to your TP2 SD card....?
Click to expand...
Click to collapse
Either way, download extract & copy or just download & extract straight to your SD.
I don't think anyone should ever use the CAB install. The only benefit you get is a shortcut, which can easily be created manually.

The FIX
hadobac said:
My experience is SD Card cannot be used if you installed xdaandroid with CAB version. I tried for the whole night, formatted my card with many different tools - without luck.
At last, I downloaded the RAR one, and finally, it works!
Hope it also works with your
Click to expand...
Click to collapse
BRILLIANT - WELL DONE... Yes, this is the answer. Not reformatting. God knows how many times I tried and the number of different tools and processes of formatting. None worked.
This worked first go.
I am now just going through the device to fine tune and no doubt will find any glitches or queries.
So, short cut for all readers.
DO NOT USE THE CAB, Use the compresses RAR file.
http://reefermattness.scepterr.info/XDAndroid2.2Froyo.112210.rar
Save on the desktop of your Laptop/PC.
Connect device to the Laptop/PC
Extract to the root of the SD Card
Take out the Programs folder from the extracted folder on the SD Card and put in the Root of the SD Card - this may clash with the WM Programs folder, but I use Ubuntu so it allowed me to merge the two nicely.
Then off you go, boot up....

jonners59
I'm happy to hear that you had your problem solved.
AFAIK this bug just happenned with the latest version - the Froyo FRX03. I'm using Ubuntu as well, and the after I bought my new Memory stick, I formatted it with the Ubuntu Disk Utility, and the Cab - the Eclair - worked very well...
But like arrrghhh have said, yea people shouldn't use the CAB install. You gotta spend time installing it (and it usually takes quite long), and just to have its shortcut...

hadobac said:
jonners59
I'm happy to hear that you had your problem solved.
AFAIK this bug just happenned with the latest version - the Froyo FRX03. I'm using Ubuntu as well, and the after I bought my new Memory stick, I formatted it with the Ubuntu Disk Utility, and the Cab - the Eclair - worked very well...
But like arrrghhh have said, yea people shouldn't use the CAB install. You gotta spend time installing it (and it usually takes quite long), and just to have its shortcut...
Click to expand...
Click to collapse
Maybe, all I know is that I had trouble getting any releases to work, and spent ages searching for fixes, which is where I first encountered other's issues with the same problem. All suggested a reformat. And the only fix that worked was the zip Maybe if I had used the zip before I would not have had all this trouble.
Now that it works, I need to look at all the other little issues.
Light on all the time
fast use of the battery
Seems to lock up sometimes requiring soft restart
No Blue tooth
No camera
and I can't see my music or pictures, though i can see all those for the various apps!

jonners59 said:
Maybe, all I know is that I had trouble getting any releases to work, and spent ages searching for fixes, which is where I first encountered other's issues with the same problem. All suggested a reformat. And the only fix that worked was the zip Maybe if I had used the zip before I would not have had all this trouble.
Now that it works, I need to look at all the other little issues.
Light on all the time
fast use of the battery
Seems to lock up sometimes requiring soft restart
No Blue tooth
No camera
and I can't see my music or pictures, though i can see all those for the various apps!
Click to expand...
Click to collapse
You really need to at least read the FAQ dude, c'mon these are BASIC questions/problems.
I did tell you to reformat, I didn't think the cab was the issue honestly - I don't ever use the cab, as I think it's quite unnecessary... But others use it just fine AFAIK.

this worked for me...thanks
i installed the cab first and i also had this same problem with the sd card. i tried the zip file and that didn't work either. Then i used the hp tool that is mentioned in post #2 to format the sd and then tried the zip file again and BINGO. So i think a combination of formatting the sd and using the zip file works best. thanks alot guys for all the help. it sucked not having any sound

madhopps said:
i installed the cab first and i also had this same problem with the sd card. i tried the zip file and that didn't work either. Then i used the hp tool that is mentioned in post #2 to format the sd and then tried the zip file again and BINGO. So i think a combination of formatting the sd and using the zip file works best. thanks alot guys for all the help. it sucked not having any sound
Click to expand...
Click to collapse
Could be, but also suggested are gParted, which is a good format tool. The HP is for Windows machines. I use Ubuntu which is Linux, just like Android, so when I installed, it did so within WINE, which is Windows tool for running their apps on Linux. It's not perfect and in this case it could not find the USB ports. No worries though as I think the zip method was the ultimate solution for my senario

arrrghhh said:
You really need to at least read the FAQ dude, c'mon these are BASIC questions/problems.
I did tell you to reformat, I didn't think the cab was the issue honestly - I don't ever use the cab, as I think it's quite unnecessary... But others use it just fine AFAIK.
Click to expand...
Click to collapse
A little unkind arrrrghhh... The issues I raised in this reply were immediately after having managed to get the device working. And yes, I know some are in FAQ, though no solutions to most and many are not.
The power issue and the no ringtones options are not. The power has meant that I can not use Android and have gone back to WM for now. I used 2 batteries yesterday and ran out of charged batteries by 6PM! It should last over 24hrs per battery.

jonners59 said:
A little unkind arrrrghhh... The issues I raised in this reply were immediately after having managed to get the device working. And yes, I know some are in FAQ, though no solutions to most and many are not.
The power issue and the no ringtones options are not. The power has meant that I can not use Android and have gone back to WM for now. I used 2 batteries yesterday and ran out of charged batteries by 6PM! It should last over 24hrs per battery.
Click to expand...
Click to collapse
Well I'm glad you have such strong opinions about how this project should be. Keep making demands, it's very helpful...
Anyhoo, this project is for TESTING PURPOSES, it's not ready for prime-time yet. Have fun with it, but don't think it's meant to replace WinMo.
Also, all of your questions have been answered before - maybe they're not all in the FAQ, but most are. However, every single question you've asked has been asked before - use search!

arrrghhh said:
Well I'm glad you have such strong opinions about how this project should be. Keep making demands, it's very helpful...
Anyhoo, this project is for TESTING PURPOSES, it's not ready for prime-time yet. Have fun with it, but don't think it's meant to replace WinMo.
Also, all of your questions have been answered before - maybe they're not all in the FAQ, but most are. However, every single question you've asked has been asked before - use search!
Click to expand...
Click to collapse
Oh, yes, sorry, I am a bit forceful.
Actually, the device in Android has completely died. I have a blank black screen. Sad moment. I like the look, the feel and the way this project works, but it has a long way to go before it is a serious contender, sadly.
UPDATE: I plugged it in to my Laptop to effectively start over, and suddenly the PIN window appeared... We are back on. The ways and wonders of SW.

sd card
my girlfriend and i both have the same phone. I have a PNY 16GB sd card in my phone and she has a SanDisk 8Gb. I dont have the problem with android not reading my sd card and i used the cab file, but android wont read her sd card. did everything the same on both phones, so i am kinda thinking it is the maker of the sd cards.

edlokien said:
my girlfriend and i both have the same phone. I have a PNY 16GB sd card in my phone and she has a SanDisk 8Gb. I dont have the problem with android not reading my sd card and i used the cab file, but android wont read her sd card. did everything the same on both phones, so i am kinda thinking it is the maker of the sd cards.
Click to expand...
Click to collapse
I have heard this before, which is why I mention my card type in the thread

phone works fine, winmob works fine, if i use 4gb sdcard, android works, BUT
it android does not recognise sdcard(inside android),
if i use a 2gb sd card, inside android, the sd card is recognized.
When i use the 4gb is says sdcard not available,
format of both sd cards is the same, software is the same, android is the same.
for last: ANdroid is with both sd cards working, only inside android there is difference with both cards.

My experience and from what I have seen in my threads and searching is:
1. The SD card itself may make a difference. I have had and seen comments that some makes of card do not work or work as well as others.
2. The card should be formatted externally, i.e. gparted, HP's device or whatever to FAT32
3. The installation of Android should be done by downloading the zip to your PC/Laptop and then copying to the root of your SD card, then it tends to stand more chance of working.
I can second guess someone will contradict me, but I spent 4 months trying to get it working, including working with a developer... And following some advise this is what I found was the only way to make it work.
Give it a bash, but it is what ever works for you.
PS this is only a project so whilst the OS is absolutely fantastic it does have some things that do not work or work well. Good luck

DFrouter fix, yes this actually puts hd7*schubert) back in zune mode :)

Hey guys,
I wanted to share a solution I came up with that actually worked in putting the phone back in zune mode. you have to buy a Y cable and a gold card. the process is fairly straightforward and takes about 30 minutes to complete.
Check out my blog post here
http://fkhandev.wordpress.com/2011/08/11/dfrouter-fixhow-to-get-your-windows-phone-back-in-zune-mode/

Do you have the SCHUIMG.nbh?
Would be really reat
Best regards
Oberoth

Oberoth said:
Do you have the SCHUIMG.nbh?
Would be really reat
Best regards
Oberoth
Click to expand...
Click to collapse
here you go
http://forum.xda-developers.com/showthread.php?t=1058918
there are the files for more then only hd7
the thing is we already know this for mounts but nobody listen

fearlessdolphin said:
Hey guys,
I wanted to share a solution I came up with that actually worked in putting the phone back in zune mode. you have to buy a Y cable and a gold card. the process is fairly straightforward and takes about 30 minutes to complete.
Check out my blog post here
http://fkhandev.wordpress.com/2011/08/11/dfrouter-fixhow-to-get-your-windows-phone-back-in-zune-mode/
Click to expand...
Click to collapse
Works great! Thanks man.
Guys, if a detailed tutorial is needed with a cheeper way of doing that without buying the XTC CHIP - tell me and i'll write something.
Finally I can deploy Apps !!!!!
Ofir.

Hey ofir
You do not need the xtc clip. Just any preprogrammed SD card or create a gold card yourself. The entire setup cost less than $30. Well worth it.

fearlessdolphin said:
Hey ofir
You do not need the xtc clip. Just any preprogrammed SD card or create a gold card yourself. The entire setup cost less than $30. Well worth it.
Click to expand...
Click to collapse
Yes, I know. I've used about 5$ to setup the necessary for fixing the device.
But the tutorials wasn't so good, that's why I've suggested to write a proper guide.
Ofir.

Thanks Ceeshism. I wish there were less condescending people on this site like ofir here, who after reading this post will only reply with another argument.

Can we just do the hd7 hard reset for it.Cause i use the dfrouter now i can't connect to my pc or even zune.
Edit: I try hard reset it didn't work.

ofir54321 said:
Yes, I know. I've used about 5$ to setup the necessary for fixing the device.
But the tutorials wasn't so good, that's why I've suggested to write a proper guide.
Ofir.
Click to expand...
Click to collapse
How do you make the setup? Can you tell us?

I'm still a bit shocked, but it worked! HD7 is talking to Zune again.
Thanks!

team23 said:
I'm still a bit shocked, but it worked! HD7 is talking to Zune again.
Thanks!
Click to expand...
Click to collapse
how did you do it. i already have the cables.

Ttblondey said:
how did you do it. i already have the cables.
Click to expand...
Click to collapse
just copy the file on a gold card.
connect the goldcard using a Y-Cable to the phone (one side to phone,one side to goldcard,one side to powersource )
then bring phone in tri color (bootloader mode)
it should automatically see the goldcard and the diag file gets loaded.
follow instructions on screen.

ok thanks.

The problem is creating the goldcard although i have copy the 2 files in my m2 memory card from my multicard reader.

Ttblondey said:
The problem is creating the goldcard although i have copy the 2 files in my m2 memory card from my multicard reader.
Click to expand...
Click to collapse
"m2 memory card" ?
only sd cards will work and only smaller then 1 GB
"multicard reader" you can't use that one , it need to be a "microsd card reader"
(something like this " http://www.varologic.com/blog/post/...oduces-new-MicroSD-Micro-USB-Card-Reader.aspx " )

fearlessdolphin said:
Hey guys,
I wanted to share a solution I came up with that actually worked in putting the phone back in zune mode. you have to buy a Y cable and a gold card. the process is fairly straightforward and takes about 30 minutes to complete.
Check out my blog post here
http://fkhandev.wordpress.com/2011/08/11/dfrouter-fixhow-to-get-your-windows-phone-back-in-zune-mode/
Click to expand...
Click to collapse
Well I do not give the option of diagnostic mode, just install the rom and nothing else, I get on the radio screen, bootloader, and you rcust, nothing more,I do not appear in either Flash Mode or Diag Mode