Develop Bugs

[Kernel]Cm7/AOSP[2.6.32.40](v2.6.6)MaxOC~1.84GHz,Smartass/UV/BFS/BFQ/SLQB[May-26]

THIS KERNEL IS NOW OBSOLETE. CM7 Nightly 90+ and my Nexus 1.2.5+ require TRUE 2.6.35+ Kernel​
All GB Sense ROMs should use my GB Sense Kernel
All Froyo AOSP ROMs should use my Froyo AOSP Kernel
All Froyo Sense ROMs should use my Froyo Sense Kernel[/b]
Hi XDA members and fellow MT4G users:
This is my SECOND kernel hack. I want to thank Gr8Gorilla, Erasmux, dumfuq and several others I cannot recall for inspiring me to venture into this unfamiliar territory for me.
What is a Kernel? The Kernel is the Foundation in which everything else builds upon in any software system.
[Car Analogy]: Kernel is like the Engine, Electrical system and the Transmission to a car. The Library, Framework and the Apps [AKA ROM] are the body frame and the rest of the Car.
​
THIS KERNEL is BASED ON AOSP/CM7 Source Code. So it is COMPATIBLE ONLY WITH AOSP/CM7 Builds.
Please DO NOT use any task killers, they DO NOT improve performance nor battery life. They INTERFERE with your phone's stability (more crashes) and App compatibilities (Forced Close).
MinMax Governor (Battery Saver)
This governor will try to minimize the frequency jumps/changes which cause voltage spikes/changes which supposedly drains more battery life... Supposedly designed to work with SetCPU... so give it a whirl...
SmartAss Governor (Balanced)
This governor has a built-in "profile" similar to SetCPU, so screen off will use lower clock rate thus conserve more battery, but it also has a fast wake up feature so that user interaction will not see the lag when switching from Sleep to Wake state.... (So SetCPU Profiles are sorta redundant when using this governor, you can still use SetCPU to OC to higher than default Clock frequency).
Interactive Governor (Performance)
This governor is designed to put more priority to User Interface (UI aka Apps) tasks, therefore appears more responsive then the traditional OnDemand governor. So if you want the smoothest UI interaction, this governor is for you...
Brain F*ck Scheduler - (BFS)
This scheduler is designed to be simple and speedy tailor specifically for user interface type systems such as desktop/smart phone devices where user interaction is MORE important than serving 1 million web requests (CFS, the default scheduler) at the same time (think of nimble desktop workstations vs large corporate servers).
SLQB - (SLAB allocator with Queue)
This memory allocator is designed for small number of CPUs system (such as desktop or smart phone devices). This allocator is design to be simple and it is optimized for using order-0 pages as much as possible (order-0 pages are the simplest therefore quickest type of memory in a Linux system to allocate). Not all kernels are using SLQB including CM7 main line...
Fair Budget Queue (BFQ I/O scheduler)
This I/O scheduler is an improvement on top of Completely Fair Queue (CFQ). CFQ is fair in terms of time but not in terms of throughput / bandwidth, so BFQ make sure that both time and throughput / bandwidth are balanced across all requests.
Installation Instructions:
Here's a step by step instruction to install this kernel:
Warning Version 2.6.3+ is COMPATIBLE ONLY with Android 2.3.4 ROMs such as latest CM7 nightlies, MIUI, RoyalGinger.
All Android version 2.3.3 ROMs such as older versions of CM7 including RC1, RC2, RC3, CM 7.0.1~7.0.3 should use version 2.5.2!
[ FINAL VERSION ]
[ CFS-Smartass ] (Mainline)
The File ==> CM Kernel 2.6.6 CFS Low Voltage #162 <==
The File ==> CM Kernel 2.6.6 CFS Stock Voltage #163 <==
[ BFS-Interactive ] (Enthusiast Edition)
The File ==> CM Kernel 2.6.6 BFS Low Voltage #164 <==
The File ==> CM Kernel 2.6.6 BFS Stock Voltage #165 <==
Low Voltage - Under Volt the processor, therefore uses Less Battery, but NOT ALL CHIPS can handle Under Volt.. If you experience instability, try the Stock Voltage Version.
Stock Voltage - Uses the voltage values from ORIGINAL HTC Kernel Source.
There are NO PERFORMANCE DIFFERENCE between the 2 versions!
[Optional CFS kernel ONLY]
If this is first time you FLASH my kernel or you just recently FLASHED any ROM,
To use my CFS-Tweaks from version xxx, you must FLASH xxx first, then FLASH the latest version.
1. download the above file (via phone directly or to a PC)
2. copy the downloaded zip file to /sdcard/download/
3. Open ROM Manager and select "Reboot into Recovery" and select "OK"
4. Once in recovery, select "wipe cache partition", select "Yes", then select "advanced", then select "Wipe Dalvik Cache", then select "Yes" again. Once finished, click the back button to go back to the main recovery menu. On that menu, select "Install Zip From SDCad", then select "Choose zip from SDCard", then go to /sdcard/download and select the downloaded zip file and let it run its script.
5. Once the script is done, select "reboot system now"
Note: After FLASHING, the first reboot may take longer than usual, please be patient... After the first reboot, it may lag during initial load (let everything finish loading). Once everything is loaded and phone is ready for use, reboot the phone a 2nd time and the lag will be gone and everything should be silky smooth...
NEWS BULLETIN:
Version 2.6.6 is OUT!!!!
This is most likely the FINAL VERSION for this kernel. CM7 is moving to a real 2.6.35+ kernel from very soon. Once that happens, this 2.6.32 kernel will be made obsolete!!!
Please don't hesitate to talk among yourselves and help each other out... The MT4G/XDA community is what inspired me to hack kernels for everyone since everyone here is nice and helpful to each other... Keep helping each other.... Famous proverb: It's better to give than to receive...
BUGS:
[ Android 2.3.4 ROM ]
If you experienced WiFi issue, it means the bcm4329.ko modules was NOT installed properly.
Extract the bcm4329.ko from the same zip file, then
[ with ADB ]
adb push bcm4329.ko /system/lib/modules
[ with Root Exploror ]
1. touch Mount R/W
2. copy bcm4329.ko to /system/lib/modules
3. long press on the bcm4329.ko and select Permissions then check read, write for owner, read for group and read for others, click ok
4. long press again on the bcm4329.ko and select Change Owner, then pick 0-root for owner and pick 0-root for group, click ok
I will investigate to see if I can fix the updater script so this would be done automatically with 2.3.4 ROMs
Not All CHIPS ARE CREATED EQUAL
[NOT REALLY A BUG, when OC'ed, everything is questionable]
Interactive and OnDemand Governors will freeze the phone when the delta / difference between the Max and Min frequency is too large..
Ie, Max 1843MHz~Min 245MHz -- will lock up, but Max 1840MHz and Min 1000MHz will NOT...
TO DO:
version 2.x.x -- Haven't thought about it yet...
History:
See Post below...
Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this kernel!!!
My Github Complying with GPL
Follow me on
:
If you find this Kernel useful, feel free to hit the [Thanks] button below

Version History
History:
Version 1.0: (deprecated)
Baseline from CM7 kernel source code
Added OC all the way to 1.8 GHz (drawing Max VDD @ 1400)
Added SmartAss, MinMax Governors
Applied Cache clear routine from HTC Incredible line (better emulator performance)
Under volt (battery savings) frequencies below 902400 Hz (up to -100 mVolts)
Added more intermediate Overclock frequencies (all the way to 1.84 GHz for you brave souls )
Increased Bluetooth Volume Gains and Handset Volume Gains
Added BFS and SLQB technology (see above)
Tweaked SmartAss governor slightly
Made built-in BFQ I/O scheduler as default I/O scheduler (see above)
Version 1.1.0: (deprecated)
Adjusted SmartAss to use the same adjustments as my Sense Kernel (This will further help prolonging battery life)
Updated CM7 CPU freq table to be the same as my Sense Kernel (added 1 more low CPU frequency @ 537600 KHz, to help battery life)
Version 1.2.0: (deprecated)
Adjusted SmartAss to use the same adjustments as my Sense Kernel (reduced Sampling time to 33ms for super smooth response)
Version 1.3.0: (deprecated)
Added my Sense Interactive and OnDemand Governors to CM line
Version 2.0.0: (deprecated)
Updated CPU Frequency/Voltage Table from my Sense ROM (includes the new 536 MHz clock for use with "SmarterAss Governor")
Updated Touch Panel Driver from my Sense ROM (Touch of Silk feeling, aka, Finger Porn)
Updated Sound Driver from my Sense ROM
Updated Bluetooth Driver from my Sense ROM
Updated Camera Driver from my Sense ROM
Updated Keyboard Driver from my Sense ROM
Updated Optical Joystick Driver from my Sense ROM
Updated Battery Driver from my Sense ROM
Version 2.0.2: (deprecated)
Updated WiFi driver
Updated General TCP/IP networking stack
Updated USB driver (not easy)
Compiler optimized for Neon FPU and ARM7 architecture
Version 2.0.3: (deprecated)
Updated Video Driver from EVO Shift 4G
Adjusted DMA Engine to work with CFS
Version 2.0.4: (deprecated)
Updated core Kernel version from 2.6.32.28 to 2.6.32.31 (some bug fixes and performances boost)
Added CIFS (read bulletin for details)
Version 2.0.5: (deprecated)
Corrected Kernel Version to indicate 2.6.32.31
Updated File System Components including Core, NFS and EXT3
Updated Crypto Kernel Component
Added UTF-8 support to show special characters to work with CIFS
Version 2.0.6: (deprecated)
Fixed WiFi error related to county code due to coding error (late night coding is bad )
Version 2.1.0: (deprecated)
Updated core Kernel version from 2.6.32.31 to 2.6.32.32 (Speedy Edition)
Version 2.1.2: (deprecated)
Maintenance release: Fixed minor errors in power management driver and video driver
Revert back from RWSEM_XCHGADD_ALGORITHM to GENERIC_SPIN_LOCK
Version 2.1.2.1: (deprecated)
Fixed screen tearing issue (coding error in private memory flush routine leads to screen tearing)
Version 2.1.4: (deprecated)
Updated Core Linux Kernel from 2.6.32.32 to 26.6.32.33
Fixed few issues in CFS
Updated WiFi driver
Updated I2C driver
Revert back to CM7 OnDemand and Interactive Governors
Updated SmartAss Governor
Added CGroup Freeze/Unfreeze control
Fixed potential stack overflow in BunZip2
Updated with latest base CM7 kernel changes
Version 2.1.5: (deprecated)
Cleaned up all remaining issues in CFS
Updated OnDemand Governor
Updated bunzip2 again
Updated G-Sensor Driver
Updated Compass Driver
Updated KeyReset Code for Inputs
Updated SDCard Driver
Version 2.1.6: (deprecated)
Fixed bugs in Speaker Amp and G-Sensor drivers which prevents screen rotation under certain conditions found by user [MadWolf27] MAJOR PROPS to him!!!
Version 2.2.0: (deprecated)
Updated Video Driver (openVG) per CM7 Changes (Now compatible with Nightly Build 29+)
Version 2.3.0: (deprecated)
Updated Core Linux Kernel from 2.6.32.33 to 2.6.32.34
Updated GPU code from latest HTC Incredible S Kernel (same as CM7 GPU updates)
Added native FUSE (file system in user space) per CM7 changes
Adjusted kernel compile configurations per CM7 changes
Version 2.4.2: (deprecated)
Updated Core Linux Kernel from 2.6.32.34 to 2.6.32.36
Updated kernel to latest HTC WiFi Driver from HTC Incredible S Kernel Source
Included the latest HTC WiFi Firmware from HTC Desire Z (leaked)
Added native CIFS+UTF-8 directly into kernel (CM7 kernel added CIFS+UTF-8 just 5 days ago, we had it for weeks). No more need for .ko files.
Fixed a minor mismatch bug in MMC driver
Revert back to my Old Interactive and OnDemand Governors
Adjusted CPU Voltage Tables again ONLY for LOW VOLTAGE versions.
Version 2.4.3: (deprecated)
Reverted Back to CM7 WiFi Driver to fix WiFi AP issue
Version 2.4.4: (deprecated)
Fixed bugs in Speaker Amp and G-Sensor drivers which prevents screen rotation under certain conditions found by user [MadWolf27] MAJOR PROPS to him!!!
Version 2.4.8: (deprecated)
Updated Headphone driver from HTC Thunderbolt kernel
Updated GPIO driver from HTC Thunderbolt kernel
Updated Battery Driver from HTC Thunderbolt kernel
Updated LED Driver from HTC Thunderbolt kernel
Updated Power Driver from HTC Thunderbolt kernel
Updated SPI Master Driver from HTC Thunderbolt kernel
Updated MMC/SD Driver from HTC Thunderbolt kernel
Updated USB Dock Driver from HTC Thunderbolt kernel
Applied CodeAuroraForum (CAF) Wake_Lock patches to new 2D/3D drivers to improve power management when Video is waiting for I/O to complete (save more JUICE!!!!)
Adjusted CPU Freq Table changed 536 MHz to 576 Mhz from using PLL_2 to PLL_3 (PLL2 reserved exclusively for OC)
Adjusted Smartass Governor's Max_Sleep_Freq to reflect CPU Freq Table change 536->576MHz
Fixed a couple issues in WiFi driver
Removed All Debugging code [boost performance]
BFS scheduler is BACK! [Enthusiast Versions]
Compiled with newer toolchain from 4.4.0 to 4.4.3 [more optimizations = better performance]
Version 2.5.0: (deprecated)
Patched Core Linux Version from .36 to .38
Patched BFS version from 3.3.0 to 3.6.3 (latest stable release of BFS)
Fixed minor Bluetooth driver error
Fixed minor Touch Screen driver error related to wireless charging update from before
Fixed minor issues in Camera Drivers (front and back)
Fixed minor issues in LED drivers
Fixed minor issue in Voice Processor Driver
Removed unnecessary / unused drivers
Version 2.5.1: (deprecated)
Updated PPP network driver (used by VPN)
Updated WiFi driver related to Address Resolution Protocol (ARP) offloading
Updated with Zinx's latest Video Frame Buffer Fix specifically for Glacier (should fix video playing while screen is off, hard lockup issue)
Version 2.5.2: (Long Term Stable Release For GB 2.3.3 ROMs)
The File ==> CM Kernel 2.5.2 CFS Low Voltage #137 <==
The File ==> CM Kernel 2.5.2 CFS Stock Voltage #138 <==
The File ==> CM Kernel 2.5.2 BFS Low Voltage #135 <==
The File ==> CM Kernel 2.5.2 BFS Stock Voltage #136 <==
Updated Core Kernel from .38 to .39
Updated the Light Sensor Value from Zinx
Version 2.6.1: (deprecated, AOSP 2.3.4)
Updated WiFi Driver with latest CM7 patches
Updated USB Driver with latest CM7 patches
Updated MDP (video) Driver with latest CM7 patches
Added USB Accessories Support for AOSP 2.3.4_r1
Version 2.6.3: (deprecated, AOSP 2.3.4)
Added Native GB HTC Kineto_Gan Support directly via kineto_gan.ko
Removed CM7's gan_eth Froyo WiFi Calling Hack
Version 2.6.5: (deprecated, AOSP 2.3.4)
Patched core kernel to .40 from .39
Re-adjusted Voltage table based on HTC's 2.6.35 kernel source for LV and SV
Adjusted SmartAss Governor Ramp Up/Down steps
Default Speed now set at 1.2 GHz
Applied USB Battery Drain patch
Removed more unnecessary drivers
Version 2.6.6: (Current, AOSP 2.3.4)
Revert SmartAss Tweaks back to 2.6.3
Revert AudioDSP drivers back to 2.6.3
Default Speed now set at 1.1 GHz
Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this kernel!!!
Follow me on
:
If you find this Kernel useful, feel free to hit the [Thanks] button below

Reserved 2 Just in case

Downloading...
Sent from my HTC Glacier using XDA App

163 kb???
Sent from my HTC Glacier using XDA App

verysick said:
163 kb???
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Your download is corrupt re dl it the file should be over 3 MB
Sent from my HTC Glacier using XDA App

verysick said:
163 kb???
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
The file is 3.4 MB. Try downloading again.

Everything looking good, thanks.

will try now

Wow is seem more faster than before and Apps works fine.
Sent from my HTC Glacier using XDA App

Had to try bout 6 times to get the 3.44mb \m/ just hit 4th place on linpack
Sent from my HTC Glacier using XDA App

feliciepr7 said:
Wow is seem more faster than before and Apps works fine.
Cool! I put lots of new technologies into this kernel from my Sense Kernels and I was afraid of it not working at all since I was unable to test it myself... I am happy that you guys like it. Please test the heck out of it and report any errors on my thread... now try your best to beat my Sense Kernel Users high scores in synthetic benchmarks..
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Sent from my HTC Glacier using XDA App

Faux123 is this the same version (1.0b) that you posted in the cm7 rc thread? (with a promise of NO SUPPORT) thanks for this, it's fun to play with. Only really stable on my silicon to 1700 with smartass gov. Keep up the good work!
Sent from my HTC Glacier using XDA App

I have a??? If I update from my current version of rom v. 2.0 to the new one, do i have to flash it again the kernel?
Sent from my HTC Glacier using Nexus S 2.0 and XDA App.

feliciepr7 said:
I have a??? If I update from my current version of rom v. 2.0 to the new one, do i have to flash it again the kernel?
Sent from my HTC Glacier using Nexus S 2.0 and XDA App.
Click to expand...
Click to collapse
Yes, if you are running jaywans new release, that should be compatable since it's basically a modified cm7. Nandroid flash and find out.
Sent from my HTC Glacier using XDA App

After flashing this kernel I noticed GPS doesn't lock anymore..anyone else have this problem?
Sent from my HTC Glacier using XDA App

I'm having problems getting the (H) signal
Sent from my HTC Glacier using XDA App

verysick said:
I'm having problems getting the (H) signal
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I'm getting H ..did you wipe cache before flashing?
Sent from my HTC Glacier using XDA App

I am getting H too, no problem yet.
Sent from my HTC Glacier using Nexus S 2.0 and XDA App.

feliciepr7 said:
I am getting H too, no problem yet.
Sent from my HTC Glacier using Nexus S 2.0 and XDA App.
Click to expand...
Click to collapse
¿ y en Barceloneta hay H ? No pense que llegara hasta aya.
I did not know that H got to his location.

[Nov29][GSM][Kernel|ROM][Froyo][P1000L/N]

November, 29 2011
Honeycomb-Beta-v3.5 for P1000L/N
Download
Instructions (use P1000LVJJM9 Froyo downgrade)
You can download JM9 ROM here .
_______________________________________
September, 04 2011
New kernel.
Download
Features:
Recovery CwM with full functions.
Added host USB.
Added I/O Schedule [VR]
_______________________________________
August, 20 2011
I created a place for discussion about P1000L/N in Portuguese language.
[Construí um espaço para discussão sobre os modelos P1000L/N em português]
http://www.humberos.com.br
_______________________________________
July, 30 2011
New Rom - HumberOS-v1.3.0-Americas
Download here
sha1sum
Code:
a49e77f226038c439beb102cfa0986ad1cb74d73 HumberOS-v1.3.0-Americas.zip
Make your backups [only user apps]
This is a wipe version
_______________________________________
July, 29 2011
New FAST kernel
Download
sha1sum
Code:
3074e9af87c9adff5c6879f61946ebbe2fb42e69 zImage_ltn_20110728.tar
_______________________________________
July, 21 2011
New Rom HumberOS-v1.2.6-Americas
Added latest kernel [zImage_ltn_20110612]
Download here
sha1sum
Code:
aec9e30ef6787e0c4f3be0a9d2b99db7882adcab HumberOS-v1.2.6-Americas-P1000L.zip
_______________________________________
June, 14 2011
I've just ported CF-Root to new Gingerbread Kernel.
Moved to Another Thread
_______________________________________
June, 12 2011
New HumberOS kernel version.
Changelog (bottom of this post)
Download
_______________________________________
June, 10 2011
New Kernel (Android 2.2.1) for P1000L version.
Tested on JMG (Android 2.2.1)
This Kernel dont work on HumberOS Rom. (sorry)
Read Changelog(bottom).
LINK
P1000N version, looking for testers!
Issues:
Reboot when USB connect (on HumberOS-1.2.5 Rom)
_______________________________________
May, 11 2011
H u m b e r O S v 1 . 2 . 5 - P1000L - Americas
DOWNLOAD
April, 23 2011
H u m b e r O S v 1 . 2 . 3
Link: HumberOS ROM
This is a similar Overcome ROM version for P1000L/N devices.
Thanks to @alterbridge86 !
INSTALL INSTRUCTIONS
Install a stock ROM.
If you have a stock ROM, please flash Humberos latest kernel (20110610).
If you have latest humberos kernel, put the zip file (HumberOS-vX.X.X.zip) in sdcard and install it with CwM Recovery.
You can find instructions on doing this below under "if your Tab doesn't boot..."
Titanium Backup users, ONLY backup user applications and data, NOT system apps and system data.
Also, read this LINK
ROM FEATURES
HumberOS Kernel v20110420 Included (OC/UV) (thanks to @koxudaxi)
Overcome Recovery (Voodoo Initramfs)
Fully Deodexed
Fully Zipaligned
Rooted with busybox installed
Reboot/Recovery/Download options added to the power menu
Some icons modifieds
GPS Fix included
Removed Startup/Shutdown sounds
Cool Honeycomb bootscreen
Smoked notification background
Gallery replaced with AOSP
Power Off confirmation disabled
GPS tweaks
Added AppWidgetPicker
Browser modified to allow for UAString - "Desktop"
A2DP Bluetooth Connection Fix
WPA_Supplicant replaced to allow ad-hoc wifi connections
KERNEL FEATURES
UV Control and OC 1.2/1.4 (thanks to @koxudaxi)
Overcome CwM Recovery v3.0.2.8 (Custom built Clockworkmod v3.0.2.8) (thanks to @alterbridge86)
Simple I/O Scheduler added and set as Default
Built in CIFS/TUN/SlowWork support (thanks to @koxudaxi)
Voodoo Sound - version 8 (thanks to @supercurio)
Pre-rooted initramfs (thanks to @richardtrip)
Ext4 Update (thanks to @koxudaxi)
Decrease Ram voltage (thanks to @koxudaxi)
Decrease LCD voltage (thanks to @koxudaxi)
Network Fix : LINK thanks to @fernandoper .
HumberOS-v1.2.3 TV Tuner Fix - Instructions
____________________________________________________________
April, 18 2011
CM7 Kernel for P1000L/N
I've just compiled a CM7 kernel version for P1000L/N devices.
Please, read all INSTRUCTIONS AND CHANGELOG BEFORE flash.
Kernel: LINK
PS. Download CM7 Beta and replace the kernel file.
Thanks to @ivannw !
____________________________________________________________
April, 15 2011
P1000N with Arabic Language Support
Link: HumberOS-v1.1.2-Arabic.zip
Install instructions: LINK
____________________________________________________________
DONATE
..
..
..
..
Finally, if you like my work, donate to me!
Thanks!
Se gostou do meu trabalho, faça parte dele com uma doação simbólica.
Muito obrigado!
..
..
..
..
..
..
..
____________________________________________________________
CHANGE LOGROMHumberOS-v1.3.0Android 2.2.1
Features:
zImage_ltn_20110728
Updated Voltage Control App
Added Dolphin Browser HD
HumberOS-v1.2.6Android 2.2.1
Features:
zImage_ltn_20110612
HumberOS-v1.2.5Android 2.2.1
Features:
zImage_ltn_20110505
Window Flip
HumberOS-v1.2.3Baseband version: P1000ZTKC1 - Android 2.2.1
Features:
zImage_ltn_20110420
TV Tuner fixed
Framework-res.apk changed with HumberOS icons.
GPS tweaks
Power Off confirmation disabled
Added AppWidgetPicker
Ads Blocked
WPA_Supplicant replaced to allow ad-hoc wifi connections
Window Flip => replace /system/framework/framework-res.apk Instructions
HumberOS-v1.2.1Baseband version: P1000ZTKC1 - Android 2.2.1
Feedback: Analogic TV tuner fail
Features: zImage_ltn_20110415​HumberOS-v1.0.8Baseband version: P1000LVJJM9
Features:
Reboot/Recovery/Download options added to the power menu
Cool Honeycomb bootscreen
Fully Deodexed
Fully Zipaligned
Rooted
Busybox installed
Battery icon modified
zImage_ltn_20110402
KernelzImage_Ltn_20110904
Fixed: Digital TV Record
Fixed: CwM Recovery
Added Host USB
Added I/O Schedule VR
zImage_Ltn_20110728
Added Latest Voodoo Lag Fix
Added Voodoo Sound 10
Added BLN function
Fixed undervolt functions
Works on HumberOS Rom
zImage_Ltn_20110612
Adjustments on Initramfs CwM downgrade to 3.0.0.0
Added Voodoo Sound 9
Smartass Governor CPU
Adjutments on Touchscreeen
Increase voltages on LDC (2600) and RAM (1600)
Works on HumberOS Rom
zImage_Ltn_20110610
Initramfs fix
Adjustments on the touchscreen
Fix boot screen glitch
Improved capture of TV signal (digital/analogic)
Adjustments on sounds
zImage_ltn_20110505
Overcome CwM Recovery v3.0.2.8 (Custom built Clockworkmod v3.0.2.8)
Voodoo Sound - version 8
zImage_ltn_20110420
Overcome CwM Recovery v3.0.2.4 (Custom built Clockworkmod v3.0.2.4)
Simple I/O Scheduler
Voodoo Sound - version 7
Decrease Ram voltage *1500*
Decrease LCD voltage *2400*
zImage_ltn_20110415
UV Control and OC 1.2/1.4
Voodoo CwM Recovery
Voodoo Lagfix
CIFS/TUN/SlowWork
Voodoo Sound - version 6
Pre-rooted initramfs
Ext4 Update
Decrease Ram voltage *1600*
Decrease LCD voltage *2600*

amazing work. KUDOS!
=D

does the camera work on this one?

g2tl said:
does the camera work on this one?
Click to expand...
Click to collapse
Yes.
Camera and TV tuner.
Sent from my GT-P1000L using XDA App

Thanks, works very nicely. Exactly what I was looking for.

What is the benifit? Plzz xplain
Sent from my GT-P1000 using XDA App

Explain
deepx10 said:
What is the benifit? Plzz xplain
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Hi, @deepx10
So, after flashed this kernel my tab is another device. Even without overclocking configuration it is quite fast. The system files is converted to ext4, you can control voltage (save battery) and use a Voodoo Sound app.... Ow! And use cwm on recovery mod too... So,... Is it enough? kkkkkk
Good luck!
Regards!
Humberto.

You can teach me how to install the Rom P1000LVJJM9 (no signed bootloader) with "Heimdall" software, or if you have compressed it clean please can you post?
Ouvir
Ler foneticamente
Dicionário - Ver dicionário detalhadosubstantivo0.tributação0.imposto0.taxação0.multa0.determinação de taxas
humberos said:
Hi,
Great News for P1000L users.
We can apply patchs for make 1.4 OC, Ext4, Voodoo Sound, ... with this kernel!
Thanks to sensei @koxudaxi
Kernel: LINK
Official Thread: LINK
Baseband: P1000LVJJM9 (rooted)
initramfs: P1000LVJJM9
My procedure:
I did a full backup with Titanium Backup APP (I copied this files to my external_sd) and applied a factory reset.
After, I flashed this KERNEL on P1000LVJJM9 (without bootloader signed) baseband version with "heimdall" software.
------------------------------------------------------------------------------------------
Like this:
heimdall flash --kernel zImage_ltn_2_8_9
------------------------------------------------------------------------------------------
After flash, set your device for recovery mode (Press Vol UP + Home + Power).
You will see a different boot system.
Wait a few minutes and after.... only ENJOY!
Ps. I advise you to reapply a factory reset.
___________________________________________________________________
Thanks to sensei @koxudaxi
Click to expand...
Click to collapse

Can i use this with my tab it's a latin gt-p1000n, base p1000nubjj3

carlitos_5721 said:
Can i use this with my tab it's a latin gt-p1000n, base p1000nubjj3
Click to expand...
Click to collapse
You can try flash with heimdall.
If don't work, you will return baseband JJ3.
Please let me know if works. I can try compile a version for N models.
Regards,
Humberto.
Sent from my GT-P1000L using XDA Premium App
Baseband: P1000LVJJM9

Well, I flashed the kernel via Heimdall as stated in the OP on a P1000N and it did flash, but once I rebooted in CW and the Ext4 conversion was about to be performed I get an error message that SD couldn't be mounted.
Any ideas???

Nevermind got it to to work. So, I can attest to it working on P-1000N. Good job!!!

Jorge787 said:
Nevermind got it to to work. So, I can attest to it working on P-1000N. Good job!!!
Click to expand...
Click to collapse
What did you have to do?

Jorge787 said:
Well, I flashed the kernel via Heimdall as stated in the OP on a P1000N and it did flash, but once I rebooted in CW and the Ext4 conversion was about to be performed I get an error message that SD couldn't be mounted.
Any ideas???
Click to expand...
Click to collapse
I have the same problem on P1000L. i didn't wipe factory reset, but i don't believe this is the cause!

Honestly all I did was pulling the sd card out in the error screen, put it back in and rebooted back to recovery it worked and did the conversion.
One other thing: It is very important to do do the wipe after flashing the kernel I got into all kinds of trouble with my personal Tab, all because I forgot to wipe. But honestly this thing is flying now. Only problem seems to be thumbnail generation on the Gallery app.
Sent from my GT-P1000N using Tapatalk

Well, I must have an external de card for the recovery works. After I insert one the backup process begins. Let me see.
cristiancan - Sent from my I9000B - XDA Premium app

Update
@Jorge787
Thanks!
Please, read first post for fix gallery, browser and some APP sensor problems.

Simply great, worked perfect for Windows users disable the antivirus before running setup.bat.
humberos said:
UPDATED
Sensor Fix
For Windows: here
For linux or windows (command line):
Download: Sensor Default
Code:
adb remount
adb push sensor.default.so /system/lib/hw
adb reboot
===========================================
Hi,
Great News for P1000L users.
We can apply patchs for make 1.4 OC, Ext4, Voodoo Sound, ... with this kernel!
Thanks to sensei @koxudaxi
Kernel: LINK
Official Thread: LINK
Baseband: P1000LVJJM9 (rooted)
initramfs: P1000LVJJM9
My procedure:
I did a full backup with Titanium Backup APP (I copied this files to my external_sd) and applied a factory reset.
After, I flashed this KERNEL on P1000LVJJM9 (without bootloader signed) baseband version with "heimdall" software.
------------------------------------------------------------------------------------------
Like this:
heimdall flash --kernel zImage_ltn_2_8_9
------------------------------------------------------------------------------------------
After flash, set your device for recovery mode (Press Vol UP + Home + Power).
You will see a different boot system.
Wait a few minutes and after.... only ENJOY!
I've just compress all files for flash with ODIN. (without boot files because bootloader signed)
Download: here
Ps. I advise you to reapply a factory reset.
___________________________________________________________________
Thanks to sensei @koxudaxi
Click to expand...
Click to collapse

humberos said:
@Jorge787
Thanks!
Please, read first post for fix gallery, browser and some APP sensor problems.
Click to expand...
Click to collapse
Thanks I did it by replacing the file using Root Explorer since for some reason adb remount is not working for me. It did help a little but it's still not working 100% on the Gallery and on the Honeycomb Music app. Honestly nothing I can't live with.
So far I'm having great battery life even with O/C @1400, tried a couple of Quadrant tests and I noticed that I can get a 1900+ score as I can get 2200+ and had a couple of errors while running it too. Other than that great kernel.
Does anybody have any voltage settings yet?

Jorge787 said:
Thanks I did it by replacing the file using Root Explorer since for some reason adb remount is not working for me. It did help a little but it's still not working 100% on the Gallery and on the Honeycomb Music app. Honestly nothing I can't live with.
So far I'm having great battery life even with O/C @1400, tried a couple of Quadrant tests and I noticed that I can get a 1900+ score as I can get 2200+ and had a couple of errors while running it too. Other than that great kernel.
Does anybody have any voltage settings yet?
Click to expand...
Click to collapse
Hi,
I also had these problems and solve them when I replace sensor file and reboot.
My configuration on Voltage Control is:
app: VoltageControl-gt-600.apk mirror this app can decrease voltage in OC_kernel(add 600MHz& 1.4GHz)
Scheduler: bfq
Limit clock to: 1400Mhz
Code:
1400 Mhz: 1450 - 50 = 1400mV
1200 Mhz: 1300 - 50 = 1250mV
1000 Mhz: 1250 - 75 = 1175mV
800 Mhz: 1200 - 75 = 1125mV
600 Mhz: 1100 - 100 = 1000mV
400 Mhz: 1050 - 100 = 950mV
200 Mhz: 950 - 150 = 800mV
100 Mhz: 950 - 150 = 800mV
Regards,
Humberto
Sent from my GT-P1000L using XDA Premium App
Baseband: P1000LVJJM9

[July 19th 2011][CWM]TMOUS-CM7-DATA2SD GRJ22/2.3.4 [K:tytung_r10]

This is my first post in this forum and I hope this works as well for you as it has for me.
First and foremost: I am not a developer; just an advanced user that has spent many many many hours in these forums and has used the tools I have found to make my deice the best it can possibly be. I TAKE NO RESPONSIBILITY FOR ANY DAMAGE DONE TO YOUR DEVICE BY USING THE SCRIPTS PROVIDED. I did not create these scripts and for the life of me cannot remember which forum or developer(s) I got them from; I am sorry that I cannot give the proper credit.
I have been using this DATA2SD method for about a month with several different ROMs and have found it to be very fast and very stable (only one crash in 2 weeks using Hyperdroid 2.1, not sure what caused it).
I am currently using the latest Hyperdroid CM7 (big Thanx to Pongster for a fantastic build!), albeit a version cooked using dsixda's kitchen to include my favorite apps and a few other changes. I have also used these scripts with the AOSP MIUI 1.6.24 and up ROMs (my NAND configuration has not changed between the two [MIUI and CM7], not sure if the large cache size helps or not). I have only used this process successfully with these two builds and cannot attest to the compatibility or stability if used with any other firmware.
I am using a 200MB system partition with 45mb for cache with Clockwork Recovery 4 (partitioned and updated using the HD2 toolkit). My SD card is using EXT3 set at 1024MB. Once again, this is the only configuration I have used successfully.
**BUG**
The only bug I have noticed so far is that whenever the device is rebooted CM7's Theme Manager reverts to the default (system) theme.
Instructions are included in the download. The scores shown were attained running Hyperdroid CM7 with the governor set to performance at 1152mhz (the highest stable overclock speed for my device using an 2.3.4 based ROM). The scores are provided by Quadrant Advanced (of course) and Device Mark.

nice but why is it only for tmous ?
i have one but i wonder why an tmous version is neccessary
errmm and i think u should post some Screens of the homescreen

This should work for 512 as well, i have only been able to test on us version... will post some screen shots
Sent from my HD2

Posted another in the screen shots forum
Sent from my HD2

so can some one tell me how can i try it on a eu version? I mean do i just flash it in the cwm recovery or something else?

beston94 said:
so can some one tell me how can i try it on a eu version? I mean do i just flash it in the cwm recovery or something else?
Click to expand...
Click to collapse
It should work as well as it works on the tmous version because it doesn't use that much place that requires a tmous. You can't to anything wrong
If u try it I would say please report back so that the dev know if it works there too
Sent from my HD2 using XDA Premium App

I included instructions with the download; these are scripts that are flashable visa clockwork recovery and should work with your device. Compatibility issues usually come into to play with the ROM that is used; it must support scripts (I think the proper term is init.d scripts). Usually Rom s that already have Apps2sd support this but i have only used this process successfully ( stable) with the AOSP MIUI and Hyperdroid ROMs
Sent from my HD2

cinnesere said:
This is my first post in this forum and I hope this works as well for you as it has for me.
First and foremost: I am not a developer; just an advanced user that has spent many many many hours in these forums and has used the tools I have found to make my deice the best it can possibly be. I TAKE NO RESPONSIBILITY FOR ANY DAMAGE DONE TO YOUR DEVICE BY USING THE SCRIPTS PROVIDED. I did not create these scripts and for the life of me cannot remember which forum or developer(s) I got them from; I am sorry that I cannot give the proper credit.
I have been using this DATA2SD method for about a month with several different ROMs and have found it to be very fast and very stable (only one crash in 2 weeks using Hyperdroid 2.1, not sure what caused it).
I am currently using the latest Hyperdroid CM7 (big Thanx to Pongster for a fantastic build!), albeit a version cooked using dsixda's kitchen to include my favorite apps and a few other changes. I have also used these scripts with the AOSP MIUI 1.6.24 and up ROMs (my NAND configuration has not changed between the two [MIUI and CM7], not sure if the large cache size helps or not). I have only used this process successfully with these two builds and cannot attest to the compatibility or stability if used with any other firmware.
I am using a 200MB system partition with 45mb for cache with Clockwork Recovery 4 (partitioned and updated using the HD2 toolkit). My SD card is using EXT3 set at 1024MB. Once again, this is the only configuration I have used successfully.
**BUG**
The only bug I have noticed so far is that whenever the device is rebooted http://forum.xda-developers.com/showthread.php?t=852219&page=37CM7's Theme Manager reverts to the default (system) theme.
Instructions are included in the download. The scores shown were attained running Hyperdroid CM7 with the governor set to performance at 1152mhz (the highest stable overclock speed for my device using an 2.3.4 based ROM). The scores are provided by Quadrant Advanced (of course) and Device Mark.
Click to expand...
Click to collapse
Is the same as:
http://forum.xda-developers.com/showthread.php?t=527636
or
http://forum.xda-developers.com/showthread.php?t=852219&page=37
or is another approach?

I don't believe so; i believe the process outlined in that post (i could be wrong) uses a data image similar to the one Rafpigna uses in Rafdroid or in Acura MIUI which is stored on the root of the sd card. This script uses ext 3 for the storage. I could be wrong, this is my first time seeing that post.
Sent from my HD2

Today's run
Sent from my HD2

i tryed with EU HD2 and no problem
one question: it's possible to try to OC tytung kernel to 1.5ghz? (like in rafpigna 1.9)

pirlano said:
i tryed with EU HD2 and no problem
one question: it's possible to try to OC tytung kernel to 1.5ghz? (like in rafpigna 1.9)
Click to expand...
Click to collapse
It should work :$
But make a nandroid backup before flashing the kernel so you can revert to the "stock" rom if booting fails after flashing
Sent from my HD2 using XDA Premium App

pirlano said:
i tryed with EU HD2 and no problem
one question: it's possible to try to OC tytung kernel to 1.5ghz? (like in rafpigna 1.9)
Click to expand...
Click to collapse
I have not been able to use Raf's kernel with any 2.3.4 Rom at 1.5 ghz with or without these scripts. I haven't seen anyone we in the forums mention this so maybe it is my device... if anyone has a suggestion I would live to see it, i really like Raf's kernel, sips the battery...tytungs kernel maxes at 1190, which is also unstable on my device with 2.3.4 Roms
Sent from my HD2

cinnesere said:
I have not been able to use Raf's kernel with any 2.3.4 Rom at 1.5 ghz with or without these scripts. I haven't seen anyone we in the forums mention this so maybe it is my device... if anyone has a suggestion I would live to see it, i really like Raf's kernel, sips the battery...tytungs kernel maxes at 1190, which is also unstable on my device with 2.3.4 Roms
Sent from my HD2
Click to expand...
Click to collapse
tytung is stable for me and 1190mhz on tytung is fast as 1536mhz on rafpigna one, so i was thinking that 1536mhz with tytung would be awesome...
btw with hyperdroid cm7 v2.1 with tytung at 1190mhz and you trick i'm only able to reach """only""" 2500 point in quadrant, and 3d graphic is corrupted (some 3d bench are black). it's possible to update graphic driver with an update.zip in recovery?
what rom are you using to reach 3000 points?

pirlano said:
tytung is stable for me and 1190mhz on tytung is fast as 1536mhz on rafpigna one, so i was thinking that 1536mhz with tytung would be awesome...
btw with hyperdroid cm7 v2.1 with tytung at 1190mhz and you trick i'm only able to reach """only""" 2500 point in quadrant, and 3d graphic is corrupted (some 3d bench are black). it's possible to update graphic driver with an update.zip in recovery?
what rom are you using to reach 3000 points?
Click to expand...
Click to collapse
I am running Hyperdroid cm7 2.1 at 1152MHz ( the highest stake clock speed for my device). Have you tried setting the governor to performance in cyanogenmod settings? Chainfire 3d lets you update the driver of the device but this program is meant to make the rendering of complex 3d graphics easier for older devices (at least that's my understanding). I am using this program but I did not apply the effects to quadrant ( or any other app). The high scores database read/ write speed.
Sent from my HD2

cinnesere said:
I am running Hyperdroid cm7 2.1 at 1152MHz ( the highest stake clock speed for my device). Have you tried setting the governor to performance in cyanogenmod settings? Chainfire 3d lets you update the driver of the device but this program is meant to make the rendering of complex 3d graphics easier for older devices (at least that's my understanding). I am using this program but I did not apply the effects to quadrant ( or any other app). The high scores database read/ write speed.
Sent from my HD2
Click to expand...
Click to collapse
yes when i play games or do some bench, i set performance and min and max at 1190mhz it's possible to go higher than 1190mhz with tytung r10? (limit is written on the kernel or somewhere in system params?)
i tryed to install chainfire drivers but i still got black screen on 3d tests
3d tests on newer gb cm7 are working ok, so i'm asking if there is an update.zip flashable in recovery to update driver in this pongster's hyperdroid cm7 rom

pirlano said:
yes when i play games or do some bench, i set performance and min and max at 1190mhz it's possible to go higher than 1190mhz with tytung r10? (limit is written on the kernel or somewhere in system params?)
i tryed to install chainfire drivers but i still got black screen on 3d tests
3d tests on newer gb cm7 are working ok, so i'm asking if there is an update.zip flashable in recovery to update driver in this pongster's hyperdroid cm7 rom
Click to expand...
Click to collapse
I tried once to substitute Raf's kernel for tytungs using dsixda's kitchen with a gingerbread Rom and it wouldn't boot. I don't know enough about kernels to change the processor values and I don't know if a flashable update for the drivers for this Rom.
Sent from my HD2

cinnesere said:
Instructions are included in the download. The scores shown were attained running Hyperdroid CM7 with the governor set to performance at 1152mhz (the highest stable overclock speed for my device using an 2.3.4 based ROM). The scores are provided by Quadrant Advanced (of course) and Device Mark.
Click to expand...
Click to collapse
Looks like a nice script! Questions:
1) Is it necessary to use the same partition sizes as you for it to work?
2) Once Data2SD is implemented, can you restore data partition to SD using advanced restore in CWM?

So does this script really make the rom faster and more stable than it already is? Like for example dorimaxes rom?
Sent from my HTC HD2 using XDA Premium App

lukedunk said:
Looks like a nice script! Questions:
1) Is it necessary to use the same partition sizes as you for it to work?
2) Once Data2SD is implemented, can you restore data partition to SD using advanced restore in CWM?
Click to expand...
Click to collapse
Thank you...
1) The short answer is; I don't know. I have used this partition setup with several ROMs and just decided to try it with the scripts. I am using this ad my daily driver and have been for about a month with only one crash, so Idon't want to start experimenting with the setup just incase ( Hyperdroid is a very stable Rom to begin with).
2) The script itself is not apart of the backup so you would have to follow the installation procedure after the restore.
Sent from my HD2

[Q] runny droid

I found this on the official runny droid thread " Removed software (CPU) rendering - full Andreno200 (GPU) rendering" what does this mean ? And desire hd has andreno 205 does this affect the speed ?

blazzy4214 said:
I found this on the official runny droid thread " Removed software (CPU) rendering - full Andreno200 (GPU) rendering" what does this mean ? And desire hd has andreno 205 does this affect the speed ?
Click to expand...
Click to collapse
i have installed this rom, but than decided to go back to the runny droid 4.0, because no affect i didn`t see!!! The speed for me is the same, and in RomManager it shows "version 4.0".

[Kernel] Kitkat CM (015) Hybrid (UV/FastCharge/S2w/Intelliplug/Intelliactive)[Jun-01]

Installation Instructions:
Here's a step by step instruction to install this kernel:
[normal mode]
1. download the above file (via phone directly or to a PC)
2. copy the downloaded zip file to /sdcard/download/
3. extract boot.img from the zip file to a location of your choice ON YOUR PC
4. open up a command window (Windows) or shell terminal (Linux/Mac)
5. connect USB cable to the phone
6. type "adb reboot bootloader"
[fastboot mode]
7. type "fastboot flash boot boot.img"
8. Once fastboot flash is completed, disconnect the USB cable
9. Select hboot using volume buttons on the phone
[recovery mode]
10. Select recovery
11. go to /sdcard/download and select the downloaded zip file and let it run its script.
12. Once the script is done, select "reboot system now"
Note: After FLASHING, the first reboot may take longer than usual, please be patient... After the first reboot, it may lag during initial load (let everything finish loading). Once everything is loaded and phone is ready for use, reboot the phone a 2nd time and the lag will be gone and everything should be silky smooth...
****************** KitKat KERNEL (Android Version 4.4.x) ******************
Change Log => http://faux.romhost.me/endeavoru/kk44/changelog.txt
(Mainline Edition: All Variants => 1.40 Quad)
The File ==> One-X Kernel Mainline <==
OLD OLD DEPRECATED KERNELS BELOW
****************** Ice Cream Sandwich KERNEL (Android Version 4.0.x) ******************
(Mainline Edition: All Variants => 1.40 Quad)
The File ==> One-X Kernel Mainline <==
(Ultimate Edition: Variant based CPU overclocking: Variant 3 => 1.60 Quad, Variant 2 => 1.55 Quad, Variant 1 => 1.50 Quad)
The File ==> One-X Kernel Ultimate <==
************** ABSOLUTELY NO SUPPORT FOR THIS VERSION AT ALL, DON'T EVEN BOTHER TO POST **************
(Ultimate Edition: Variant FREE CPU overclocking: Variant 3 => 1.60 Quad, Variant 2/1/0 => 1.55 Quad)
The File ==> One-X Kernel Variant Free <==
[ Advanced Users: ]
How to find tegra3 CPU variant information with my kernels:
use terminal or file explorer of your choice with root access and read/open this following file below:
Code:
/sys/kernel/debug/t3_variant
cpu_process_id <== is the variant info range from 0~3
[ Optional: ]
[ For Kernel Devlopers ONLY: ]
NEWS BULLETIN:
One-X kernel 012 is out based on latest CM release!
Please don't hesitate to talk among yourselves and help each other out... The XDA community is what inspired me to hack kernels for everyone since everyone here is nice and helpful to each other... Keep helping each other.... Famous proverb: It's better to give than to receive...
Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this kernel!!!
My github Complying with GPL
https://github.com/faux123/android_kernel_htc_endeavoru
Follow me on
:
If you find this Kernel useful, feel free to hit the [Like] button below

History:
Change Log

DUE TO MY EXTREMELY BUSY SCHEDULE BOTH @ WORK AND @ HOME, I WILL ONLY MAKE MAJOR ANNOUNCEMENTS ONCE PER WEEK
Open Beta may not be stable and may cause issues with your phone!
By loading open beta you have agreed to:
1. To report all random reboots with associated /proc/last_kmsg
2. To provide feedback on errors or bugs with detail phone information such as ROM, kernel version, and apps
3. Participate in Forum discussions for the beta software with others without FLAMING each other or post useless information such as:
a} Phone doesn't boot (without providing any additional information, ROM versions etc)
b} phone is too hot (without providing any additional information, ie OC freq, UV etc)
The Open Beta system is designed to have the community help each other and the developers. This way, all potential bugs are flushed out so the final released version will be stable and error free. The more actively you participate in Beta Testing the better the final product will be (you are really helping yourself to create a better community software).
If you do NOT agree with the statements above, DO NOT load my Open Beta software.
Kernel 012 Open Beta 1 is out! (BETAs ARE ALWAYS ULTIMATE + Variant Free unless I stated otherwise)
ICS ==> http://faux.androidro.ms/endeavoru/beta/endeavoru-Faux123-012b1.zip
[ build 1 ]
Add Low Power (LP) core overdrive
(What is LP overdrive? LP core is capable of running up to 620 MHz @ 1.3 volts, so I simply unlocked the LP core to allow it to operate @ max freq. The overdrive also adjust the G cluster / LP core cross over point. The stock version was @ 475MHz LP / 370 MHz G-cluster, I moved the cross over point to 620MHz LP / 513 MHz G-cluster).
What does all this mean? It means LP core is now able to handle more load up to 620MHz single core before switching over to the more power hunger G-Clusters. This should theoretically save more battery life (since LP core is designed to very power frugal in Hardware). When you check the CPU stats with CPUSpy, you will see the cross over points 513MHz and 620 MHz to have high usage time. <== THIS is normal because the stats counts BOTH the LP time and the G-Cluster time so it appears to have more time than other frequencies.

reserved 3

SWEET FAUX IS HERE TOO!
Flashing now

Woot. First post . Thanks faux !
Sent from my HTC One X using XDA
Edit: beat me to first

Great to see you here

Welcome. Heard many good stuff about your work and very glad that you are here. Rated your thread 5 stars and thanked you as well Hope you get your phone soon

Thanks, looking forward to trying this out, will flash later tonight with a fresh ARHD 5.1.1

Nice to see you here mate. have you a changelog for us?

Holy Crap! it's faux! woo. I guess you got your hands on a 1X?

MarcoHD said:
Nice to see you here mate. have you a changelog for us?
Click to expand...
Click to collapse
http://rootzwiki.com/topic/25336-kernelone-x-sense-40-001-beta-may-11/

Hi faux,
As developer do you think that the flicker issue (on some devices) can be solved from the software side? I'm asking this becasue I'm still waiting for the fix from someone and don't want to send the device back to the shop if it will be possible to fix this via software.
Many thanks in advance!

hiazn said:
Holy Crap! it's faux! woo. I guess you got your hands on a 1X?
Click to expand...
Click to collapse
Nope... still don't have 1.. read the first line on my OP...

H377 said:
Hi faux,
As developer do you think that the flicker issue can be solved from the software side? I'm asking this becasue I'm still waiting for the fix from someone and don't want to send the device back to the shop if it will be possible to fix this via software.
Many thanks in advance!
Click to expand...
Click to collapse
Don't have the phone. so I don't know what flicker issues...

So can we set lower voltages with this kernel by using the app systemtuner?
Sent from my HTC One X using XDA

faux123 said:
Don't have the phone. so I don't know what flicker issues...
Click to expand...
Click to collapse
On some devices at some brightness levels, mostly on gray images the screen behaves not as expected. It starts to flicker but only on the grey part of image. (for me at least).
It's like installing an OS on PC with a generic display driver, like if the refresh rates were not correct.

Here are some benchmarks screen shots:

Hi faux!
Can the kernel be flashed right onto ARHD 5.1.1 or does it have to be adapted to ARHD?
Greetings
Edit: Tried it myself and it works on ARHD 5.1.1
Antutu Benchmark is : 10121
Quadrant BM is: 4366
Unfortunately, I have to admit that my Antutu scrore was around 11000 with Bricked Kernel,
but whatever

faux123 said:
Don't have the phone. so I don't know what flicker issues...
Click to expand...
Click to collapse
No flicker issues here....
Sent from my HTC One X using xda premium