OEM supplied by Schaps. This version already integrated in his last ROM.
Not like previous version, this version Profile Tab already work correctly. No need to do anything. I have use it for several days and I dont notice any notifications queue issue or wild vibrate at all.
But I do change the following:
-Installation directory change to \HTCHome instead of \Windows
-To get Brightness shortcut working, the same patch as previous version applied.
-The same patch applied to enable the Tab Setting through registry.
Other than that Nothing. Much better version than v1.5
Color version uploaded!!!!
If you are ROMcooker, download the htchome.dll for rom cooker .
Install sdkcert.cab if you have not done so.
There are about 100 pages of discussion about v1.5. Lets not repeat what have been discussed over there like: Clicking left most mail icon will take you to MMS, how to change music tab tolaunch HTC Audio Manager, and so on and so on. I dont plan to follow up closely on these thread as I think this version is very good already. Should there be any fix, change, etc please refer to the respective post.
Enjoy
Is this better than the one you had released with your kaiser skin?
Currently i am using that, is it worth me updating?
Thanks
Bennec, the one you are using is v1.5.xxxx. Very earlier and uncomplete version that has been tweaked to make it reliable enough to be used. This version is a new build with the profile tab working and additional features in the contact tab thatenable you to select what number ina contact for the speed dial. Definately worthed.
Can you post a version where the files do go in the windows directory? I want to cook this in, but not have duplicates.
TooSharp said:
Can you post a version where the files do go in the windows directory? I want to cook this in, but not have duplicates.
Click to expand...
Click to collapse
you can, just use windiff on the SYS and OEM folders of your kitchen, the dump folder is created by processing these 2 folders, so any file dups will be in there BEFORE you run buildos.exe.
add you package, then run windiff ont he SYS and OEM folders, it will find the file duplicates, and delete the ones that ARE NOT from your new package!!
bennec83 said:
you can, just use windiff on the SYS and OEM folders of your kitchen, the dump folder is created by processing these 2 folders, so any file dups will be in there BEFORE you run buildos.exe.
add you package, then run windiff ont he SYS and OEM folders, it will find the file duplicates, and delete the ones that ARE NOT from your new package!!
Click to expand...
Click to collapse
Maybe I should have been more clear.
When creating a rom, all files will be placed in the windows directory, if you need files in a different directory like the cab posted above you will have to use initflashfiles which just copy the files to a new folder, then you will have duplicates. I just don't want 2megs of photos in two spots.
Garphical Anomolies
@schen you need to swap some of the icons for my fixed ones!!
please Download this Original Icons Fix and add it to you package. 2 of the black and white icons (Music and People) dont react properly when you select them.
that link fixes them!! (it is not just yours, it is a common problem with all htc home plugins!!!)
TooSharp said:
Maybe I should have been more clear.
When creating a rom, all files will be placed in the windows directory, if you need files in a different directory like the cab posted above you will have to use initflashfiles which just copy the files to a new folder, then you will have duplicates. I just don't want 2megs of photos in two spots.
Click to expand...
Click to collapse
Your question makes no sense then!
When you COOK this in obviously you would remove the version you already have in the ROM therefore you would not have the duplicates.
Also if you just created an package out of the cab above you will get NO initflashfiles therefore the package will install to the windows directory!!!
bennec83 said:
Your question makes no sense then!
When you COOK this in obviously you would remove the version you already have in the ROM therefore you would not have the duplicates.
Click to expand...
Click to collapse
You still don't understand. My problem is NOT buildos failures. I don't want duplicates when the rom is complete. Any time you use a initflashfile you will have duplicates in the finished rom. That is what they are for. Again the problem is not with duplicates in the OEM and SYS. If you go back and check my posts you will see I helped you with this exact problem. I know how to create a rom!!!! What I don't know how to do is edit the dll file to redirect it to look in the windows directory for the png files. Hence why I'm posting.
bennec83 said:
Also if you just created an package out of the cab above you will get NO initflashfiles therefore the package will install to the windows directory!!!
Click to expand...
Click to collapse
Yes you do get a initflashfile that copies all the png files to HTCHome. See attached.
schen, installed & everything working fine, except for one, am unable to use the hardware navigational pad when accessing music tab, from there u can't proceed to go up, go to ff, rw or play button.
Touchscreen function (for all of the above ff, rw & play tabs) in music tab is working though.
thanks anyway.
TooSharp said:
You still don't understand. My problem is NOT buildos failures. I don't want duplicates when the rom is complete. Any time you use a initflashfile you will have duplicates in the finished rom. That is what they are for. Again the problem is not with duplicates in the OEM and SYS. If you go back and check my posts you will see I helped you with this exact problem. I know how to create a rom!!!! What I don't know how to do is edit the dll file to redirect it to look in the windows directory for the png files. Hence why I'm posting.
Yes you do get a initflashfile that copies all the png files to HTCHome. See attached.
Click to expand...
Click to collapse
Funny, i created the package and i didnt get that!!!
il have to look into the flashfile generator in using (im not using the core one that you are!!)
Thanks for the heads up and apologies for the confusion!!!
bennec83 said:
Funny, i created the package and i didnt get that!!!
il have to look into the flashfile generator in using (im not using the core one that you are!!)
Thanks for the heads up and apologies for the confusion!!!
Click to expand...
Click to collapse
No problem. Thanks for the help. Sometimes it's hard to convey what you are thinking in words, especially about something so confusing.
TooSharp said:
No problem. Thanks for the help. Sometimes it's hard to convey what you are thinking in words, especially about something so confusing.
Click to expand...
Click to collapse
Well then my answer to your question would be to remove the initflashfile, then everything would get installed to the windows directory and since you have no need for shortcuts, this would be fine!!!
been using this for a while and saw the new version a while ago. has option of more when u go to the 4 day detail in weather. fonts seem nicer and all. looks like a good upgrade to 1.5 Bennec83 irc bro
schen said:
OEM supplied by Schaps. This version already integrated in his last ROM.
Not like previous version, this version Profile Tab already work correctly. No need to do anything. I have use it for several days and I dont notice any notifications queue issue or wild vibrate at all.
But I do change the following:
-Installation directory change to \HTCHome instead of \Windows
-To get Brightness shortcut working, the same patch as previous version applied.
-The same patch applied to enable the Tab Setting through registry.
Other than that Nothing. Much better version than v1.5
I will create a separate Cab based on Schaps color version as well in a minute after a few try this cab with no problem.
Enjoy
Click to expand...
Click to collapse
Thank you for the new version, and tab setting is essential. Thanks again!
bennec83 said:
Well then my answer to your question would be to remove the initflashfile, then everything would get installed to the windows directory and since you have no need for shortcuts, this would be fine!!!
Click to expand...
Click to collapse
Just tried that. It doesn't work without the png files in the HTCHome directory. I guess we can't have everything.
The special dll for installing n Windows directory uploaded. Use that dll.
On the subject of weather plugin.
I am not sure why is there a need for a pre-configured xml file. Anyway, you need a gui to choose the city. Why not have a gui where you could enter the data which is stored on xml file. I suppose rather than sending an entire xml line when communicating with xml service, build an xml file base on the data entered via gui.
As I understand it, the DLL was just edited using a hex editor as \HTCHome and \Windows has the same number of characters, it sounds like it wasn't a decompile thing or something like that.
I'm not at home at the mo so I can't check but if you load the DLL up into a hex editor (winhex?) then replace all the \HTCHome text with \Windows, you should be good to go.
This is just my uderstanding though of what I've read in the previous....saga
Smiffy.
schen said:
The special dll for installing n Windows directory uploaded. Use that dll.
Click to expand...
Click to collapse
Thanks for the fix!!
Hello , im wondering if this is possible, the click is nice but i want to add more of an lg prada sound.. any help?
It is possible. Look inside windows directory for a sound file which sounds like the click on screen tap. If you found it, rename your new screentap-soundfile exactly like the original one. It must be wav if wav, or wma if wma.
You can replace the file with Resco Explorer in windows directory. It does an overlay over the original file in ROM.
Or you cook the original away and replace it with yours, if you can cook.
Or you take a cab file (somewhere around here in Hermes forum) which adds WM6-Sounds. Look inside the cab, and direct the clicksound to your new soundfile on device. Install cab then.
Any software provide this function and it is able to create a CAB file to let me share with others?
thx =]
You should get the m9editor, find the manila files containing the icons you want to change, change them and if you want to make a cab, use some kind of cab manager or you could simply copy them in the windows folder (not with the standard file explorer - use total commander or something like that) and then restart TF3D. If you have done everything right, you should have the new icons displayed, if not - simply delete the manila files you have changed and softreset - this should restore them if you have not made backup of the original file.
oh, thx for your reply >3<
but m9 doesn't work on my pc T_T
i am using windows xp, china-hong kong version T_T
moreover, what software can create cab file?
iambenz said:
but m9 doesn't work on my pc T_T
i am using windows xp, china-hong kong version T_T
moreover, what software can create cab file?
Click to expand...
Click to collapse
Strange... I also use XP (not the china version) and it works for me... maybe you should ask for support the creator of the editor. As for the CAB files - I personally use 'WinCE CAB Manager' but I think there are a number of other managers, just google them and find out which is best suited for you.
Hello People
I would like to put ringtones from Duttys ROMs on my Topix ROM..especially the ones you have a message and email
Can anyone tell me how can I do that without flashing the ROM and copying the desired content?
Thank you.
if you know the name of the tone youre after then you can use google
here are all of the ones you get on the hd2:
http://onj1.andrelouis.com/phonetones/unzipped/HTC-HD2/
in google search
intitle:"index.of"(wav)*name of tone here*
just swap out *name of tone here* for, guess what, the name.
here you go
copy and paste it in
\windows\rings or \windows folder depending on the rom you have flashed
View attachment 334576
thank you very much..
i would like all of the rings from duttys rom though..
could you also please provide all of them?
thanks a million
...
you could try to use htcrie to get the files from the .nbh
works with artemis roms..
make sure you get the .dll (usually missing)
ill post link..
Hello together.
I´m in a little Dilemma:
I have two versions of Sense 3.5-Rom.
The first is EQDKP 5.2, here is sense complete installed, all works fine, but...german isn´t complete.
I understand that this Rom isn´t made from te EU, so no problem
Furthermore the Clock is modded, so it hat a blue line round the clock-fields
At the other hand is the actual Chucky-Rom, here all is in german,
but...Sense isn´t complete (HTC Hub and the HTC Music-App, Peep and Teeter are missing, some Widgets are also absent).
Is there a possibility to include missing parts in both of the Rom´s?
I´m no modder, but i can learn to do so, can anybody please help???
Best regards
Markus
TSC Yoda said:
Hello together.
I´m in a little Dilemma:
I have two versions of Sense 3.5-Rom.
The first is EQDKP 5.2, here is sense complete installed, all works fine, but...german isn´t complete.
I understand that this Rom isn´t made from te EU, so no problem
Furthermore the Clock is modded, so it hat a blue line round the clock-fields
At the other hand is the actual Chucky-Rom, here all is in german,
but...Sense isn´t complete (HTC Hub and the HTC Music-App, Peep and Teeter are missing, some Widgets are also absent).
Is there a possibility to include missing parts in both of the Rom´s?
I´m no modder, but i can learn to do so, can anybody please help???
Best regards
Markus
Click to expand...
Click to collapse
Yes, take out the apps (.apk) you need from the installation zip of the ROM(system/app) which has all the files and then copy them into the other ROM. and install it. You can also push the files into the ROM if it's already installed and even copy them using a root file explorer.
After copying just reboot the phone. And you are done.
Hey, dude, thx a lot for your reply!:good:
I would, but which files do i need ie for HTC Hub to copy??
Greetings
Markus
TSC Yoda said:
Hey, dude, thx a lot for your reply!:good:
I would, but which files do i need ie for HTC Hub to copy??
Greetings
Markus
Click to expand...
Click to collapse
Start with files which are named htc there and copy all of them. Except the ones you think you dont need. BTW htc hub is I guess named "HtcHubSyncProvider.apk" and also copy htc location apks too.
Okay Guys, i have it.
The following files are needed:
HtcDirect.apk
HtcDirectDownloadsProvider.apk
HtcHubSyncProvider.apk
The other two files were not necessary, they were same ones in both Rom´s.
I copied the files to /system/app, changed their permissions to rw/r/r and rebooted the system.
Now HTC Hub is functional
Also the HtcMusic.apk was copied and it works great!
Many thanks to you, sukhjit321, you made my dilemma disappear!!!!:laugh::good:
Best regards
Markus
Glad I could be of help.