Related
I used about a month to finish editing a ROM for hx4700.
It solves the slow speed problem of hx4700 with original WM5.
Highlights:
1) 8 MB Paging Pool
2) WM6 Rings and sounds thx to bluecream4
3) WM6 .tsk and themes in wisbar
4) Removed Dockware, Pocket Informant, Today Panel
5) Removed useless documents, pictures and ugly hp original themes
6) Added WM6 icons thx to bluecream4
7) Added Taskmgr v2.7 in .cab form thx to dotfred
Note:
- Usable ROM: 82.59MB Usable RAM: 54.30MB
- Please install WM6Icon.cab immediately after you have flashed your device. Do not change the start menu settings until you have installed the Icon pack.
- Please do not uninstall the WM6Icon. If you do so, the shortcuts in program files will also be deleted.
- You can decide to install or not to install the 3 programs. You can find them in \Windows. After Hardreset they are still there.
- Please do not perform system restore as the icons may be duplicated
How to flash:
First, you should have your HP iPAQ hx4700 WM5 ROM 2.01 ENG version Upgrade handy. Run the program. Stop when you see the Upgrade button. Copy and rename the file you downloaded as CEOS_UPD.nbf
replace the Edited CEOS_UPD.nbf with the one you have just installed on your computer. the location is like C:/ipaq/spXXX
then press the upgrade button
Please aware that it is your decision to flash it.
After flashing please perform a hard reset to boot up.
Download Link: http://www.sendspace.com/file/rxuudw
If you guys could, please kindly advise me how to replace all icons with WM6 ones.
No one uses hx4700?
i used it, i'll try to download it and post the results, thanks for the hard work man. Does this one includes ram disk?
oh yeah btw is this english or chinese?
English without Ramdisk
install it yrself
d'oh havent been able to download from sendspace, slot full, busy whatever...
i can download it successfully
Happy User Hx4700
I was very happy with this update. Very good, congratulations!!!
I have already Rom2.1 installed. Can i now upgrade to your version or is it nessasary to downgrade to windows 2003SE.
Do You plan to post step-by-step instructions how to cook own ROM for hx4700?
calkelvzeee said:
I used about a month to finish editing a ROM for hx4700.
It solves the slow speed problem of hx4700 with original WM5.
Highlights:
1) 8 MB Paging Pool
2) WM6 Rings and sounds thx to bluecream4
3) WM6 .tsk and themes in wisbar
4) Removed Dockware, Pocket Informant, Today Panel
5) Removed useless documents, pictures and ugly hp original themes
6) Added WM6 icons thx to bluecream4
7) Added Taskmgr v2.7 in .cab form thx to dotfred
Note:
- Usable ROM: 82.59MB Usable RAM: 54.30MB
- Please install WM6Icon.cab immediately after you have flashed your device. Do not change the start menu settings until you have installed the Icon pack.
- Please do not uninstall the WM6Icon. If you do so, the shortcuts in program files will also be deleted.
- You can decide to install or not to install the 3 programs. You can find them in \Windows. After Hardreset they are still there.
- Please do not perform system restore as the icons may be duplicated
How to flash:
First, you should have your HP iPAQ hx4700 WM5 ROM 2.01 ENG version Upgrade handy. Run the program. Stop when you see the Upgrade button. Copy and rename the file you downloaded as CEOS_UPD.nbf
replace the Edited CEOS_UPD.nbf with the one you have just installed on your computer. the location is like C:/ipaq/spXXX
then press the upgrade button
Please aware that it is your decision to flash it.
After flashing please perform a hard reset to boot up.
Download Link: http://www.sendspace.com/file/rxuudw
Click to expand...
Click to collapse
Does this fix the filesys.exe problem?
please follow my steps to flash this ROM
after flashing this ROM
the device runs more faster if:
1) Change active Sync schedule to manual
2) do not use automatic backlight adjustment
Could You Posibble to compress it and upload again, bcos the size are to big for my connection.
btw what the list of changes you made beside you delete the dockware and pocket informant and add wm6 icons ??
IMPORTANT
important: After upgrating can we DOWNGRADE to 1.10 (2003SE) like before in normal 2.01(hp ROM)?
plz answer
PS.is filesys fixed?
what about response time in comparison with 2003SE?
does it respond quickly to power button press (normal 2.01 didnt)?
tnx
you can downgrade it for sure
the filesys is no longer killing the cpu
but the power button stuff is still there
2003SE of coz is faster, but wm5beta2c makes no big difference..i think
pdafre4k said:
Could You Posibble to compress it and upload again, bcos the size are to big for my connection.
btw what the list of changes you made beside you delete the dockware and pocket informant and add wm6 icons ??
Click to expand...
Click to collapse
Please kindly read the Highlights
the filesys is no longer killing the cpu
Click to expand...
Click to collapse
Cool!
but the power button stuff is still there
Click to expand...
Click to collapse
what do you mean? what power button stuff?
Hello
If you a hand i am very good with programing skills as i have a HX4700 but i dont know how to create or unbind roms but programming and problem solving i am good at.
WOW!
My god Man this is brilliant work i love it will you release a better version?
Hi!
I've been searching this (excellent!) forum for these files with not Much luck.
I've come across a comm manager called mun_rus comm manager and I've tried phone dialpad-international and the zombienexus one.
The comm manager, I can't install because I get an error message saying I don't have the access rights to do so.
The dialpad-international installation doesn't seem to change anything on my phone, because everything stays the same once installed.
The zombienexus does change the phone dialpad to the layout I want, but does not use the blue/green smartdialling color scheme I've seen on some cooked roms and would like to have. Also, the dialpad used for startup pin request is not replaced by the zombienexus installation, which means I end up with a green and a black dialpad...
Please can anybody point me to the correct cabs, or files to overwrite on my phone to get those two things to work the way I like?
I'm using the AUS WM6 no SPL found in this forum.
Thanks !
FoRmaTiTo said:
Hi!
I've been searching this (excellent!) forum for these files with not Much luck.
I've come across a comm manager called mun_rus comm manager and I've tried phone dialpad-international and the zombienexus one.
The comm manager, I can't install because I get an error message saying I don't have the access rights to do so.
The dialpad-international installation doesn't seem to change anything on my phone, because everything stays the same once installed.
The zombienexus does change the phone dialpad to the layout I want, but does not use the blue/green smartdialling color scheme I've seen on some cooked roms and would like to have. Also, the dialpad used for startup pin request is not replaced by the zombienexus installation, which means I end up with a green and a black dialpad...
Please can anybody point me to the correct cabs, or files to overwrite on my phone to get those two things to work the way I like?
I'm using the AUS WM6 no SPL found in this forum.
Thanks !
Click to expand...
Click to collapse
Try This, it works on my 838Pro ...
Hi,
thanks a lot for this file. I get the same error message trying to install this one as with mun_rus one...
"Installation was unsuccessful.the program or setting cannot be installed because it does not have sufficient system permissions."
Any ideas what I could do?
Thanks!
FoRmaTiTo said:
I'm using the AUS WM6 no SPL found in this forum.
Click to expand...
Click to collapse
Maybe your ROM is lokked by default. So try a cooked version from this forum and it just works.
I've installed it on SEA version thanks for share.
I was able to install the comm manager hkkk888 posted. Thank you! I had to stop the comm manager trough task manager first.
Thanks again!
Now I'm only missing the dialpad(s) and I'll be a happy man...
Can anyone do a screen capture to show how this Comm Manager skin look like?
I would like to change the one on my Trinity WM6 too. Also, if anyone can show me a dialpad with video call button will be great.
look like this
http://www.mobile-review.com/pda/review/image/htc/elf/screens-official/scr05.png
The comm manager posted before dissapears after a soft reset and leaves me with a blue colored one...
The one I am posting stays after soft reset. Not sure, but the font on it looks more blurry...
DIAL
Dial Sceen?
ROM cookers/Devs
I understand from other threads that the issue with the dial pad is that the kaiser has 3g codecs that differ from the trinity/other htc devices, which means the 3g video call button on this dial pad does not work.
My question to you guys is; how easy/hard would it be to change the dial pad so that the action/function call behind the 3g video call button doesn't call the 3g codec/action we don't have but calls the video call function that we know we can use...?
Regards,
different dialpad from wm5?
If wm5 dialpad should work on wm6 you can try one from Hermes, works for me in wm5.
using Official WM6 SEA version, having same problem.
"Installation was unsuccessful.the program or setting cannot be installed because it does not have sufficient system permissions."
However, fixed and successfully installed by stopping Comm Manager reside in memory first
hopefully this can help all
ztuzz said:
using Official WM6 SEA version, having same problem.
"Installation was unsuccessful.the program or setting cannot be installed because it does not have sufficient system permissions."
However, fixed and successfully installed by stopping Comm Manager reside in memory first
hopefully this can help all
Click to expand...
Click to collapse
Guys, Whoever face this problem, just restart your device and do not start any program before installing this comm manager. The reason you get this error because, your existing comm manager is running and this file cant overwrite the running file.
hkkk888 said:
Try This, it works on my 838Pro ...
Click to expand...
Click to collapse
The WLAN keys are different for 838 pro and Trinity and so for other HTC devices. The Comm Manager for Hermes will definitely NOT work for Trinity (For WLAN and Data Connection)
I don´t know about data connection, but the WLAN button DOES turn the Wifi function on and off on my device.
Still looking for the dialpad
The AUSDIM "modified official rom" does have the dialpad/comm manager I want... I´ve sent him a P.M. asking if he could share them but no luck yet...
Maybe he can/will post them...
Thanks!
There you go...
Addario, that´s the Zombienexus dialler isn´t it? I´m looking for that design but with other colors for the autocompletion window.´The Ausdim Rom has a dialpad with green/blue colored contact list window. If you open the last file in the cab, you see what looks like color codes... Any ideas if this is correct or how to edit these correctly?
Also after reading trough this and other forums it seems that it is not possible to just change the dialpad where you enter the PIN-code, without flashing another rom... Seems a bit odd...
FoRmaTiTo said:
Addario, that´s the Zombienexus dialler isn´t it? I´m looking for that design but with other colors for the autocompletion window.´The Ausdim Rom has a dialpad with green/blue colored contact list window. If you open the last file in the cab, you see what looks like color codes... Any ideas if this is correct or how to edit these correctly?
Also after reading trough this and other forums it seems that it is not possible to just change the dialpad where you enter the PIN-code, without flashing another rom... Seems a bit odd...
Click to expand...
Click to collapse
Wrong. Here is a nice black dialpad - finger operable - I believe it ma be the one in AUSDIM's ROM - but it has no Video Call support - the only downside. It does update the pinpad entry, too. It says Wizard - but I have it installed on my trinity - works fine.
nealed, thanks. It's great, more finger friendly than other dialpads.
v2.0 of my developer ROM is now available. Core/XIP is the official WM6 core. Bluetooth, Power Management, Communications Management and GDI are also from the official ROM. Most of the built in apps have been refreshed. Finally, for you Tom-Tom/VPN addicts, the DUN bluetooth profile is now available in addition to Internet Sharing!
Because my imgfs is completely custom, this ROM will report itself as follows:
CE OS 5.2.1437(Build 17913.0.3.0)
v2.1 of this ROM includes:
Both DUN and Internet Sharing bluetooth profiles are available!
SDHC support: tested with 4GB cards
GLYPHCACHE limt re-optimized at 32,768
Mobile Office 2K7 includes OneNote 2K7
My ATI Imageon patch cooked in
The New Block style CommManager GUI is enabled.
The latest build of HTC X-Button v1.51 cooked into the base ROM.
The Cyberon voice dialer which can save/restore voice tags is cooked in.
Windows Live build 1400 (more stable than what is in the current Official ROM) is cooked into the base ROM
4MB Paging File
Big Storage
A2DP optimized for highest Fidelity based on hardcore's research.
additional apps: GSFinder+, DotFred's Taskmgr, PHM Regedit, SIPChange, Austinboy's Fieldtest, Adobe Reader LE, Audio Manager, Streaming Player
Windows Update and QOS removed
VoIP optimizatons: dialplan normalized for US calling (default areacode is 262 on 7 digit calls), connect over 3G as well as WiFi enabled
Live Search today plugin is set to use Google and works just fine when spaces are part of the search term
can toggle the phone skin between Video and Non-video modes using lsvw's TweakUI program
WM6 tap sounds are enabled
This ROM will play 3G streams or local mp3s over A2DP in powersave mode to Coreplayer or Audio Manager. Unfortunately, WMP can't do this. This is because I forgot to refresh WMP
The Official bluetooth Handsfree Profile has been cooked into this ROM. This provides even better Car Kit compatiblity.
This ROM is free for you to personalize. I'm not in this for the donations (although they're always appreciated ), rather my primary focus is to give you a better Hermes. So, use this base ROM to learn the ROM kitchens then go make your own ExtROM for this to customize Today Screen etc. Simply add a file called preconfig.txt to /windows to enable autoconfig (you'll need to dump a production ROM to unravel the syntax btw) to run your extrom at cold-reset startup. Because Preconfig.txt has been removed, the base rom has no autoconfig and will go directly to the today screen.
Free storage memory remains at about 49MB and free program memory is 29MB. Displayed Today screen items have been reduced and re-ordered in this manner (note: the additional plugins are still present, just unchecked in Today settings):
Date
Live Search
Internet Calling
Owner Info
Email messages
Appointments
The installer will also upgrade your splash screens to the Gold HTC Innovation theme. Your Radio, IPL and SPL will remain unchanged. However, for best results I recommend running a radio that's at least 1.40. AT&T subscribers in the US should upgrade to the v1.48.00.00 radio for vastly improved performance.
I'm using OliPro's latest RUU installer in this version and recommend installing using the SSPL option. Vista users: be sure to check out this guide for how to make SSPL installers work on your version of Windows. Or, jcespi2005 reports that with the latest WMDC (v6.1), you can upgrade through CustomRUU normally like in XP. WMDC 6.1 itself can be found here.
Download v2.1 now from RapidShare.
Download Crackberry edition now from RapidShare.
Support/Provisioning Cabs: PM a link and I'll add it here
WPBear's Cingular/AT&T provisioning cab (thanks to Tylr for locating this) http://forum.xda-developers.com/showpost.php?p=1163312
WMXL Live Cingular keymapping cab (thanks Lurch) http://forum.xda-developers.com/showthread.php?p=1332269#post1332269
"Bling" in this ROM
Sorry, but there are no fancy today themes, catchy colors or spectacular splashes included in this base ROM. All you get is performance and reliability. Bling is a personal expression, so you're free to add your own.
So, what's on your today screen? Post screenshots! Upload themes & post links and I'll put them below.
CUSTEL's black theme (thanks CUSTEL) http://www.tri-syndicate.com/CUSTEL.tsk.zip (just change the name to CUSTEL.tsk after downloading, its not a zip file). I'm actually running this one now because the block style taskmanager looks better with black menu/taskbars.
v2.0 Release Notes (check back here periodically for updates)
X-Button requires the latest versions of SPB Weather/SPb Time to correct the "Black Font" issue. The latest version of SPB Weather is v1.7.0 Build 767 and the latest version of SPB Time is v2.1.5.
The softkey editor settings are initially out of sync with the actual softkeys. Additionally, you must SR after the first time you use it to get your changes to stick. After that, the program works normally. This is a HTC bug unfortunately in softkeyapplet.cpl
executables stored on your SD card that don't have their own icons will flicker when viewed with the built in Filemanager. GSFinder+ does not experience this quirk. It's very unusual for a Windows Application to not have an icon resource built in so you will probably not even see this one. If you must see what it is I'm talking about, download powerstatus.exe from here, store it on your SC card then view the directory in filemanager.
Be sure to soft-reset after you complete the initial startup. This will activate HSDPA and initialize your WiFi MAC address.
Howto: Speed up CommManager and free up storage memory.
Use PHMRegedit to search for the value "DisableButtonText". Change this value from a 2 to a 0. Reset your Hermes by pressing and holding the power button then answering yes to the dialog that is eventually displayed. The downside is that you disable the "eye candy" interface too.
Sleuth255 said:
v2.0 of my developer ROM is now available.
Click to expand...
Click to collapse
Great news Sleuth. Thanks a lot.
Other than rapidshare, other mirror please... I've also problem downloading from megaupload.
Thanks.
Just started testing matts....1 hour ago....I will load this up tommorrow.
Thanks, been waiting for this....
Sleuth,
What was your base; the Dopod or the AT&T WM6 release?
With your previous release I had some problems car charging; but now I run the Dopod rom and I don't have the problem anymore.
I will try your rom and report back.
Cheers and thanks,
Hellejoep
thanks Sleuth! this sounds like another great build! will be flashing it soon.
hellejoep said:
Sleuth,
What was your base; the Dopod or the AT&T WM6 release?
With your previous release I had some problems car charging; but now I run the Dopod rom and I don't have the problem anymore.
I will try your rom and report back.
Cheers and thanks,
Hellejoep
Click to expand...
Click to collapse
All Official WM6 components are from the Dopod ROM.
awesome, thanks Sleuth255. I'll be removing some of the apps which I dont use and flash it. thanks again.
As if i wasted my RapidShare download on some other crap... now I have to wait 76 minutes before I can grab this.. Im actually tempted to buy credits just to get it!
Thanks Sleuth.. been looking forward to this one...
Thanks
wongsterwish said:
Other than rapidshare, other mirror please... I've also problem downloading from megaupload.
Thanks.
Click to expand...
Click to collapse
http://www.megaupload.com/pl/?d=ADAXO0LI
Great stuff, I´ve been testing the beta of this for a week and it´s solid. Great work sleuth....
Install New Rom Sleuth's Developer ROM v2.0
Thank for new rom Sleuth's.
I install this for my HERMES for test:
RUU_Hermes_DOPODASIA_WWE_3.54.707.3_6275_1.47.00.1 0_108_Ship.exe
Necessary install a new Sleuth's Developer ROM v2.0 but when press AUTO for program RUUWrapper.exe the message is ERROR.
Before install the ultimate RUU_Hermes_DOPODASIA_WWE_3.54.707.3_6275_1.47.00.1 0_108_Ship.exe the program RUUWrapper.exe FUNCTION and install different your rom.
TODAY NOT POSSIBLE INSTALL ANOTHER ROM.
Why there are this problem?
I reinstall Hard-SPL-V7 but the problem is THE SAME.
The bootloader is 1.04 and 2.10OLIPRO.
Thack for your answer.
mateuszrac said:
http://www.megaupload.com/pl/?d=ADAXO0LI
Click to expand...
Click to collapse
You legend.
franchi.flaviosrl said:
Necessary install a new Sleuth's Developer ROM v2.0 but when press AUTO for program RUUWrapper.exe the message is ERROR.
Click to expand...
Click to collapse
You mean when you autodetect on the bootloader selection screen?
If so its just that activesync hasnt detected the phone, disconnect, soft reset it, let it boot to windows mobile and plug the usb lead in again.. then try again.
Just flashed this one and noticed something strange.. My WiFi MAC has changed.. it isnt missing.. but it is weird and may be an indication of a WiFi MAC bug..
Its now 00-00-00-00-AC-9D which doesnt look like a valid MAC address..
Im gonna try it now and see if its still working.
/edit: It Isnt working, networks all come up as unavailable when I try to connect to them but its not the same issue as the DeadWLAN one as I CAN activate wifi.
hmmm.. seems that the solution is to turn on wifi, then soft reset.. when it comes back up your MAC will be right again and all will be fine.
Strange bug/error? Or just my device playing silly games?
sambartle said:
Just flashed this one and noticed something strange.. My WiFi MAC has changed.. it isnt missing.. but it is weird and may be an indication of a WiFi MAC bug..
Its now 00-00-00-00-AC-9D which doesnt look like a valid MAC address..
Im gonna try it now and see if its still working.
/edit: It Isnt working, networks all come up as unavailable when I try to connect to them but its not the same issue as the DeadWLAN one as I CAN activate wifi.
Click to expand...
Click to collapse
can you try to reflash and see how it goes ??
the_passenger said:
can you try to reflash and see how it goes ??
Click to expand...
Click to collapse
Yep.. ive got it working by turning it on and soft resetting.. but im reflashing now to see if it happens again.
franchi.flaviosrl said:
Thank for new rom Sleuth's.
I install this for my HERMES for test:
RUU_Hermes_DOPODASIA_WWE_3.54.707.3_6275_1.47.00.1 0_108_Ship.exe
Necessary install a new Sleuth's Developer ROM v2.0 but when press AUTO for program RUUWrapper.exe the message is ERROR.
Before install the ultimate RUU_Hermes_DOPODASIA_WWE_3.54.707.3_6275_1.47.00.1 0_108_Ship.exe the program RUUWrapper.exe FUNCTION and install different your rom.
TODAY NOT POSSIBLE INSTALL ANOTHER ROM.
Why there are this problem?
I reinstall Hard-SPL-V7 but the problem is THE SAME.
The bootloader is 1.04 and 2.10OLIPRO.
Thack for your answer.
Click to expand...
Click to collapse
Instead of auto, choose the version of hardspl that you have installed (boot to tri-color to find this)
Flashed again.. this time its changed too: 00-00-00-00-99-E1
powering on WLAN and Soft resetting has returned it too it's proper value.. Seems to be a weird issue where the ROM cant read the correct MAC on first boot.
can someone post or guide me as to how remove m2d from rom wm6.5 [23016]build or upload this rom without the m2d cause it is a very stable and fast rom and without m2d it would be more faster i use hypercore kitchen pls help
I cooked a rom (sys/xip build 23017) but the most important problem is the wifi what i cant solve. It doesnt work and no wifi icon in wrlsmgr.exe. I think the driver doesnt load on startup. Can someone help me?
htc ROM Image Edition
iggord said:
htc ROM Image Edition
Click to expand...
Click to collapse
i have this software but which files to remove
Russian 21501_clean for example.
http://4pda.ru/forum/index.php?showtopic=115951&view=findpost&p=2734290
And can you say yomething to my problem?
Thx a lot!
Shady313 said:
And can you say yomething to my problem?
Thx a lot!
Click to expand...
Click to collapse
pls upload ur rom then we can see
Here is my kitchen (thx for ervius) - solved
I tried to copy the whole registry from another rom and tried another oem and a lot of things but the wifi doesnt work
I've made a custom Connection Manager, but i think its not a problem, because i also dont see the wifi icon in the wrlsmgr.exe.
Thx for the help
I've tried everything:
-ported another xip/sys
-full oem, without my changes
-full sys without my changes
-copy the whole registry from another rom
-overwrite old sys files with the new ones
-searh rgu problems - i found nothing
-and a lot of other things
I hope, the downloaders will help me/us...
you can always just turn M2D off
it will still have the program files obviously, but it wont be activated so it will free up some RAM.
Just go to settings -> Today -> Items and deactivate TouchFlo and enable Windows Default
d-signet said:
you can always just turn M2D off
it will still have the program files obviously, but it wont be activated so it will free up some RAM.
Just go to settings -> Today -> Items and deactivate TouchFlo and enable Windows Default
Click to expand...
Click to collapse
yes but if u remove it u get to install more cabs and if it stays on board even if it is swithed off it runs in background eating ram
I tried my custom things with a 21231 sys and wifi works fine. The problem is with sys but what? :S
OK, I solved it. Thx for everyone who tried to help me (nobody)... I hope you will be helpful on next time
Shady313 said:
OK, I solved it. Thx for everyone who tried to help me (nobody)... I hope you will be helpful on next time
Click to expand...
Click to collapse
can u pls upload ur nbh file for build 20317
Now I made to a 23017-21928 hybrid, with my own customizations (i just cook for myself, because i think the other people doesnt like what i do for example: i delete Internet Explorer, i dont need m2d and these stuffs like this (i use ibrythill's WM7 with music, phone, clock, test, windows live and weather widgets)) If you think, i'll upload my beta version (with some bug, because ive got some problems with my oem and i extended it, so i started it from 0). I'll try to make it faster with more free memory.
I think I upload it tomorrow, now i go to sleep.
If someone will be intrested in my rom, i can upload that in some other localization, but i dont have much time.
Bye
Shady313 said:
Now I made to a 23017-21928 hybrid, with my own customizations (i just cook for myself, because i think the other people doesnt like what i do for example: i delete Internet Explorer, i dont need m2d and ther stuff like this (i use ibrythill's WM7 with music, phone, clock, test, windows live and weather widgets)) If you think, i'll upload my beta version (with some bug, because ive got some problems with my oem and i extended it, so i started it from 0). I'll try to make it faster with more free memory.
I think I upload it tomorrow, now i go to sleep.
Bye
Click to expand...
Click to collapse
Keep it up.
Shady313 said:
Now I made to a 23017-21928 hybrid, with my own customizations (i just cook for myself, because i think the other people doesnt like what i do for example: i delete Internet Explorer, i dont need m2d and these stuffs like this (i use ibrythill's WM7 with music, phone, clock, test, windows live and weather widgets)) If you think, i'll upload my beta version (with some bug, because ive got some problems with my oem and i extended it, so i started it from 0). I'll try to make it faster with more free memory.
I think I upload it tomorrow, now i go to sleep.
If someone will be intrested in my rom, i can upload that in some other localization, but i dont have much time.
Bye
Click to expand...
Click to collapse
keep it up wating and how do u remove the m2d
I dont remove that, I just dont include in the rom OEM
Shady313 said:
I dont remove that, I just dont include in the rom OEM
Click to expand...
Click to collapse
i have 23016 nbh with m2d
i use hypercore to dump rom
after ddumping which files should be rmoved or tell me ur way of editing this nbh file
I think you cannot edit the dumped rom, because its protected, so it doesnt make packages what you can remove. These nbhs doesnt include the dsm files, because the storage (and program???) memory. You can make packages only by dsm files.
I never remake others' rom because these inculde what i dont need and it doesnt include what i need. - So with lot of learn you can make your own customized, ported rom. (ervius visual kitchen can help you). I learnt everything by myself, over google, just need some time (maybe some sleepless day ).
In one word: don't dump the nbh files, because you cannot You have to port a xip/sys and if you want, modify rgus, provxmls, muis, initflashfiles and others to make it comfortable.
Sorry for my English.
My rom is coming soon
Manilla 2.0 with weather fix added. You need goto [HKEY_LOCAL_MACHINE\Software\HTC\Manila2D\Weather\0]
Edit the Following:
"LocationCode"="YOUR ZIP HERE"
"Location"="THE NAME OF YOUR TOWN"
So that you will have your local weather. You need to update your weather manually from your weather tab, and in about 15mins your home screen will update. If you want I can make a cab file with your weather information so u just need to install it and be good to go, just post your zip and city, or pm me your info and I'll post a cab for you. Here it is let me know what your all think. Special thanks to LMiller for the weather regedit information.
http://hotfile.com/dl/45643327/e89b8d3/23569_New_Manilla.rar.html
You will need your Carrier Cab. If anyone needs a link to these let me know.
You MUST have A Radio Version of 3.42.30+ for this ROM to work
Special thanks goes out to LMiller for his Manilla Oem and his help with getting me started, and to Justpctech from ppckitchens, and Wooptiewoous for some reg tweaks and internet boost.
**I'm Not Responsible for you Device**
Thanks for this new rom!
Can we have some description of what's included and excluded? and some screenshot if possible? (If it's any different from the others.. )
Nice ROM!
Clean, Fast, but a little more info needed from your install
1) Install Carrier Cab
2) Install MortScript 4.2-PPC
3) Install CDMA Weather Fix
4) Reboot
5) Install SMS Timestamp Fix
This is what I had to do for Sprint and I was getting an MSCR error on first boot until I installed Mort Script.
Otherwise, nice rom as far as speed.
Even though it is a 'Lite' rom - I'd definitely recommend adding
Mortscript 4.2
Advanced Config 3.3
PIM Backup - Latest
Please screenshot & info about Ur firmware!
I can give a general info on what's installed.
Office 2010 mobile
.Net framework 3.5
Total Commander
PHM Regedit
Manila 2d Configurator
Internet Sharing
Couple other minor utilities and I think Swype input is installed
Pretty basic Rom, no games included.
Sorry guys, been on travel and thought I'd have time to spend on the rom and everything, but had to work more than expected. This is a pretty basic rom. Some people don't like a loaded rom, and want to be able to customize it by adding what they want, so that's what this rom is for.
The rom includes:
sys 23569
Manilla 2.0.19191432.04
1 Calculator
Total Commander
PHM RegEdit
SpbScreenShot
Net Config
sms Date Fix
Rotating Clock instead of Flip Clock
Iphone type text message
ezinput keyboard
4 Column start menu
Swype keyboard
http://winbreak.com/winmo/voguegoodies/
--Carrier CABs.
I'm looking for an even "lighter" lite ROM - I want to find one with as few programs installed as possible. I can install MyPhone, Marketplace, MyPhone, etc... Total Commander is about all I'd want pre-installed, so I can edit registry settings if need be.
Perhaps I should try cooking one, myself? doubtful.
NuAngel
NuAngel, are u looking for the manilla with the weather on the home screen, or regular manilla, or no manilla?
ski21 said:
NuAngel, are u looking for the manilla with the weather on the home screen, or regular manilla, or no manilla?
Click to expand...
Click to collapse
I, myself, am a pure Titanium user, no manila. I keep it simple.
Nu
I'll make one that is completely stripped. The only thing that will be added is the what is needed to make the rom to run.
Here is the link
http://hotfile.com/dl/47507481/0e16095/23569_Barebones.rar.html
Sweet, thanks! I just started tinkering, kicking around the idea of my own build. Having a hard time with it though... I'll get there!
Nu
Need to send a thanks out to LMiller for his carrier provision program. It is awesome. It allows you to pick your carrier once the phone first boots up, very nice, and Thanks LMiller for your support of the vogue.
ski21 said:
Need to send a thanks out to LMiller for his carrier provision program. It is awesome. It allows you to pick your carrier once the phone first boots up, very nice, and Thanks LMiller for your support of the vogue.
Click to expand...
Click to collapse
Not a problem! And Glad to help!
Make sure you have the newest version HERE!
Next step will be a full auto-installer program!
If you can get an auto installer that would be awesome. Thanks for the new version.
hello
I like the manila with analog clock the most.Can anybody give me a link to a cab file?
Yes this rom is fast and I like it.But am missing the analog clock.
One annoying problem I am facing though.Everytime I reboot the phone,the mscr error pops up although I have installed tmortscript 4.3 beta 15.Is there any way to get rid of this?
I upgraded to the TP2 now, so my vogue cooking days are over. I'm not sure why that keeps popping up on boot up. I thought it was a mortscript error, but maybe it isn't.
Hi
Ok,Thanks for your great work.But before you leave the vogue forum,will you please give me the link to the cab file of manila version with the analog cloc?
I would, but I only have it in OEM for cooking, not a cab file. Sorry.
I have bumped this because it is one of the best ROMs here, and my personal favorite.
Very stable and looks good. Give it a try.
Mike
Thanks, I appreciate the comment.