Related
Hi all ! I accidentally put htc vox rom into my excalibur (RUU_Vox_HTC_WWE_1.15.405.2_4.1.13.37_02.83.90_Ship.exe). Now my phone seems to be dead . I was try hard reset and bootloader mode but nothing helps. When i connect usb cable without battery keyboard becomes
blue (light on) for 3sec and if i put battery in (usb still conected) screen becomes white for about 10 sec after that only keboard is blue (light on) all time.
Any suggestions ??
PS - sorry for my English
guliwwer said:
Hi all ! I accidentally put htc vox rom into my excalibur (RUU_Vox_HTC_WWE_1.15.405.2_4.1.13.37_02.83.90_Ship.exe). Now my phone seems to be dead . I was try hard reset and bootloader mode but nothing helps. When i connect usb cable without battery keyboard becomes
blue (light on) for 3sec and if i put battery in (usb still conected) screen becomes white for about 10 sec after that only keboard is blue (light on) all time.
Any suggestions ??
PS - sorry for my English
Click to expand...
Click to collapse
sorry to say this but if you flashed a vox rom on you Phone it will kill it because it over wites the bootloader os and radio which dose't work with excaliber
service ??
Mibile phone service will handle it ?? or i must put new mainboard in
guliwwer said:
Mibile phone service will handle it ?? or i must put new mainboard in
Click to expand...
Click to collapse
you will have to get a new mainboard for it or you could try service center
If not try this, hold the camera button (sym button) down for like 10 seconds and then plug in the usb while still holding it down, this should enter you into bootloader mode, where you can reflash the original rom the phone came with. (you can find original roms below in the signature just click on that link.
Its working prloblem is that i dont see nothing on the screen... when i connected it to usb activesync its showing HTC S710 . but keyboard is not in the right order so i don now for example where camra button is. Any sugesstions ??
I think that i can do a new flash but only with official rom which is bt rom. Link to this rom in official rom thread i unavailable. If somone have this rom pls give me a link. THX for all answers.
guliwwer said:
I think that i can do a new flash but only with official rom which is bt rom. Link to this rom in official rom thread i unavailable. If somone have this rom pls give me a link. THX for all answers.
Click to expand...
Click to collapse
If you can;t find it try to google it and see what comes up. Google always seems to do the magic
guliwwer said:
I think that i can do a new flash but only with official rom which is bt rom. Link to this rom in official rom thread i unavailable. If somone have this rom pls give me a link. THX for all answers.
Click to expand...
Click to collapse
Sent PM.
HELP
welcome everyone to the wrong bootloader spent HTC S620 (HTC ozone) so I can not enter bootloader: And the device does not respond to anything I can do what?
adu84 said:
welcome everyone to the wrong bootloader spent HTC S620 (HTC ozone) so I can not enter bootloader: And the device does not respond to anything I can do what?
Click to expand...
Click to collapse
I am not quite understanding what are you talking about, do you have a dash or an ozone
Hi!
Does anyone know where to find ROMS for HKC G1000 (DUAL SIM WM6)?
Many thanks!
i have one. they sent it to me coz i complained about noise being picked up by phone1. tried reflashing, but still the same problem.
Hi I have a HKC G1000, and do not do as a HARD RESET, as you know, thanks
I've got the last (november 2008) English ROM for HKC G1000 when been in ShenZhen month ago. If you need - I can upload it somewhere.
THOMYROS said:
Hi I have a HKC G1000, and do not do as a HARD RESET, as you know, thanks
Click to expand...
Click to collapse
There is Icon with green tree in Settings menu - search for it!
Hkc G1000 hard reset
Hi,
i have the same problem, i have installed a program now the phone is blocked in the windows boot up screen.
Did you solve the problem?
Could you help me please?
Thanks
try this
3 key press together for re-start:
G2 (Dial sim card 2 key) + Camera key (on the right side, near the on/off key) + on/off key.
9rinder said:
I've got the last (november 2008) English ROM for HKC G1000 when been in ShenZhen month ago. If you need - I can upload it somewhere.
Click to expand...
Click to collapse
hi, can i have it? please provide a link for download. thanks... hopefully it will solve my noise problem on phone 1. thanks...
can you post your rom versions?
mine is Under Device Information: WM6_HKC_G1000_VER_07
Hkc G1000
Thank you very much Pranix,
it worked ,
but only after take off the battery for 15 min. and with G1 button at place of G2.
I'm also interested to have the Rom (just in case
If you can provide a link it will be much appreciated.
mine is:
ROM: WM6_HKC_G1000_VER_07
RADIO: PPC_DMDC_RIL_01.01
PROTOCOL: W8.5P8.4
DRAGONFLY: DV17-MODULE-VER-07.12.2
Just a curiosity: this pda it supposed to have 64 Mb of ram, but on "about" i read only 43,74 Mb,
it's your the same or not?
Thanks again
we have the same version.
http://uploading.com/files/G05UZJ16/HKC G1000.rar.html
hopefully someone here can modify and update it to wm 6.1
how's the sound quality of your phone?
i have a problem with phone 1, it picks up alot of ambience noise.
difficult to hear the other person you're talking to.
if you put your hand over the mouthpiece, and also the earpiece, it creates a feedback sound.
no problem on phone 2.
Hkc G1000
Hi Pranix,
thanks for the rom file after i'll ask you how to flash it.
My phone works good both sims, your, sounds to be an hardware
problem, since you told that you have flashed the rom.
The set of the microphone for the sim 1 is too sensible, and when you put the hand on the micro, it cause what is called "larsen effectc", that happend when the sensibility of the microphone is too high and trigger a feedback from the earphone that cause an annoying whistle .
In an italian forum, I heard about an engineering code to write down in the
china phones with WM6, that allow you to set some hardware features
of the phone including the sound level, I don't know if this is possible also with our phone. but it worth a try.
I'll go to ask in the forum and if pertinent, i'll post you the answer.
Bye
hi,
the procedure to flash is in the rar file that i have uploaded.
just open the text file.
hope you can find some way to minimize the sensitivity of microphone setting for phone 1.
regards,
pranix
Hi Pranix,
he say that the code "engineer mode" it is available only on the china phones with the RTOS operating system, and in some motorola and Nokias,
but he say that maybe it is possible to change the parameters set on the windows registry, with a pc program like CeRegEditor.
Connect the phone to the pc, start CeRegEditor, make it read the registry, click on unlock (if not you can't save the changes), after that you have to look where are located the keys regarding the audio, and see if modifiyng the key value you can solve the problem.
I will look further if i find some else solution
good luck
i already tried editing registry however still the same.
maybe i was editing the wrong registry. hehe
i just hope that 9rinder gets to post his rom here
Pranix said:
i just hope that 9rinder gets to post his rom here
Click to expand...
Click to collapse
Here is link, try it, guys:
http://rapidshare.com/files/195288870/HKC.ZIP.html
Hi Pranix,
take a look here, maybe help:
http://forum.xda-developers.com/showthread.php?t=256734
then search on the registry with the keyword "volume"
9rinder said:
Here is link, try it, guys:
http://rapidshare.com/files/195288870/HKC.ZIP.html
Click to expand...
Click to collapse
hi,
can you post your rom details?
i downloaded the rom, it seems your rom & my rom are the same.
i checked the date & time stamp, its identical.
i also asked my contact at hkc, still no new rom since i asked for it sometime june.
how's the audio quality on your phone 1 & phone 2?
can you hear the calling party clearly?
oxyjo said:
Hi Pranix,
take a look here, maybe help:
http://forum.xda-developers.com/showthread.php?t=256734
then search on the registry with the keyword "volume"
Click to expand...
Click to collapse
i've actually tried editing those registries before however still the same.
the question here is that do we have one or two mircrophones?
coz if only one, then there must be a setting somewhere to adjust phone 1 & phone 2. phone 2 sound is better than phone 1.
if two microphones, i cant find the settings as there is only one setting to tweak.
Hello. I have one of this PDa.
Mine has this ROM:
ROM version:WM6_SITRONICS_SD106_VER_05
Radio version: CYNTHIA850_DMDC_RIL_01.01
Protocol version: W8.5P8.4
Dragonfly Version:CYNTHIA850 TF-DV17-MODULE-VER-07.16 Feb 18 2008 13:02:06
Do you recommend me to update?
Is any way to "extract" its original ROM?
And is any way to "edit" any of your roms to change the language of the OS?
Thanks
i had my acer e101 flash from sd card and i think i used flash bin not compatible with my unit. now all i got when i turn on the unit is acer logo flashing one thing, i noticed is that it is flashing to different logo size one is the right as it used to be and the other one i think is from the bin i've flash. i try to hard reset but its not working i also tried to used a diffrent custom rom loader for acer but all i got is up to downloading mode and it will hung up. im new here and i dont how i can fix this? i can just go into download mode but i think i cant go anywhre without the right rom loader/flasher for acer e101.
HELP WILL BE GLADLY APPRECIATED!!!
THANKS IN ADVANCE!
still no reply i guess no one is interested in helping me
Recovery in download mode acer_e101
feeling awesome today!!! atlast i already fix my problem and i found recovery flasher for my acer e101. now its working fine i've freshly installed clean rom (OS_ACER_2.003.13.EN.01_WM65_E101) this is WM 6.5 PRO.
mrkslyx said:
feeling awesome today!!! atlast i already fix my problem and i found recovery flasher for my acer e101. now its working fine i've freshly installed clean rom (OS_ACER_2.003.13.EN.01_WM65_E101) this is WM 6.5 PRO.
Click to expand...
Click to collapse
Would you mind sharing your findings with everybody so we all can benefit from them?
Cheers,
M_T_M
m_t_m said:
would you mind sharing your findings with everybody so we all can benefit from them?
Cheers,
m_t_m
Click to expand...
Click to collapse
yup i will be uploading the flasher later today i'll just zip it again to put the rom i used and also i will include a read me file for everyone
f.y.i. This not my work and im just using a program i've got from acer club ru. And i've done "no modification" what I did is just put the image file i liked.
Acer_E101_via_DOWNLOAD_MODE
here it is download and extract to your drive remember to seek first for the read me file included in the zip file ACER_E101_RECOVERY_VIA_DL_MODE_without_UpdateImage!!! ENJOY!!!
NOTE: THIS IS ONLY THE DOWNLOADER YOU CAN PUT YOUR "UpdateImage" FOLDER OF YOUR CHOICE THAT YOU'VE EXTRACTED FROM ANY ROM OF ACER E101 INSIDE THE FOLDER OF "EUU" IN "IAC Corp" FOLDER.
""""""TO BE UPLOADED VIA LINK URL WILL BE THE ONE WITH UPDATEIMAGE FOLDER INSIDE"""""""
http://www.4shared.com/file/ddRblCq7/ACER_E101_RECOVERY_VIA_DL_MODE.html
http://rapidshare.com/files/449351595/ACER_E101_RECOVERY_VIA_DL_MODE.zip
New ACER E101 Rom (Manila 2d)
here is my rom ive cooked with manila2d and some modification from my first release.
included in the rom are the ff:
MANILA 2.0.1919.1432
Ibrythill_WM_7
QUICSHUTDOWN
M2DC
S2U2
xTASK
NOTE: USE LATEST WINZIP TO EXTRACT THE FLASH.BIN
THIS ROM IS PROVIDED AS IT IS UNDER NO WARRANTY TO YOUR PRECIOUS CANDY BAR!!!! HEHEHEHE ENJOY THE ROM AND FEEL FREE TO MODIFY IT AS YOU LIKE.
credits to ALL THE MAKER of THE PACKAGES included and ESPECIALLY TO MICROSOFT, ACER and HTC. (YOU KNOW WHAT I MEAN PEACE!!!)
LAST BUT NOT LEAST TO THE ONE WHO MADE IT POSSIBLE TO WORK FOR THIS ROM. THANKS GUYS!!!!
TO ALL THE PEOPLE HERE IN XDA KEEP UP THE GOOD WORK AND THANK YOU ALSO AS FOR I'VE LEARN A LOT FROM THIS SITE.
http://www.4shared.com/file/cKTN1Jg0/ROM_E101_BUILD_23566_WWE_MANIL.html
Rom preview
Here's what the romm looks like see for yourself!!!!
Great job
Can you please tell me how did you do this rom? with w/c kitchen ?
I installed your m2dc in my acer e101 smart phone.now when i try to revert my previous ROM by active sync it says you can not change language and when i try to flash by SD card it struct in loading SD card update.
i Was using Acer_E101_2.004.04_EN_IN ROM
Please help me to revert back to original ROM
neerajsain said:
I installed your m2dc in my acer e101 smart phone.now when i try to revert my previous ROM by active sync it says you can not change language and when i try to flash by SD card it struct in loading SD card update.
i Was using Acer_E101_2.004.04_EN_IN ROM
Please help me to revert back to original ROM
Click to expand...
Click to collapse
my friend first of all M2DC is not my work maybe what you are saying is you installed my cooked rom w/c has M2DC. now for your problem about going back to your previous rom obviously you cant do it via acvtive sync bec as you are saying you cant change a language this error come out bec the rom installed now (w/c is my cooked rom) is .13_EN, means that it is originated from english version purely no sub language w/c is in the case of the one you are trying to install that is .04_EN_IN. this is english with your sub language of your local language where the unit came from. now the solution is use the recovery via dowload mode. i have already posted for this and you can also dowload this here with step by step instruction. DIGG in and search everything you need. if you cant find it i'll post it again for you. thanks alot for trying my rom.
Thank you soo much my friend you save my phone .... i follow all your instruction and my phone is ok now ... thank you very much..
akpsaudi said:
Thank you soo much my friend you save my phone .... i follow all your instruction and my phone is ok now ... thank you very much..
Click to expand...
Click to collapse
you are very much welcome my friend! for ur info there is a bug on the ROM which is i will try to resolve as soon im not busy @ work. BUG(SD UPDATE STOP WORKING) anyway you know how to recover now ur unit and this is not a big deal. THANKS!!!!!
Please!!!somebody help me!!!please!!! my acer e 101 is in italian and a try to flash it with sd card updater and y touch by mistake the batery and now it wont recognize my sd card and when i try to use euu it gives me an erorr and it wont work any more now my phone is stuck an acer logo it works only on download mode but the euu wont work i try with the device manager when i try to update says that is already up to date please help me Please! SOMEBODY? HELP
mrkslyx said:
you are very much welcome my friend! for ur info there is a bug on the ROM which is i will try to resolve as soon im not busy @ work. BUG(SD UPDATE STOP WORKING) anyway you know how to recover now ur unit and this is not a big deal. THANKS!!!!!
Click to expand...
Click to collapse
====================
Hi :
I Have a Problem With Recovery Update.
"DownloadForm_2005.exe" had an error and not run.
Getting message file requested is not valid on download link of 4shared. Can you reload or give new link
sir how can i remove this 3 button on my home menu? the key lock, start menu and shortcut menu. im using acer e101 6.5 prof
andreiutza said:
Please!!!somebody help me!!!please!!! my acer e 101 is in italian and a try to flash it with sd card updater and y touch by mistake the batery and now it wont recognize my sd card and when i try to use euu it gives me an erorr and it wont work any more now my phone is stuck an acer logo it works only on download mode but the euu wont work i try with the device manager when i try to update says that is already up to date please help me Please! SOMEBODY? HELP
Click to expand...
Click to collapse
you can read all the post here on how to recover your unit, if you know how to put your unit unto recovery via download mode there is a post here on how it works. search for it my friend.
vb_progsys said:
====================
Hi :
I Have a Problem With Recovery Update.
"DownloadForm_2005.exe" had an error and not run.
Click to expand...
Click to collapse
what is your problem my friend pls elaborate more so that i can help you beacause right now my acer e101 is not with me anymore i've given it to my wife but i still do remember how to make it works.
my friend i am very sorry because i lost all of my files for acer e101 and i not using the unit anymore. you can ask somebody here to help you to upload again what they have donwloade previuosly.
kitomi98 said:
sir how can i remove this 3 button on my home menu? the key lock, start menu and shortcut menu. im using acer e101 6.5 prof
Click to expand...
Click to collapse
what do you mean by remove the 3 button, those are in the rom's user interface of acer. how do you want your home menu to look like?
Hi all
I want to present you the work done by Serg090909 on the 2 Din Chinese Car audio system many people begin to use.
This sort of Car audio use WinCe 6.0 for Radio/TV/BT and the Android part for GPS and everything android can handle.
I only found information about modification in russian language by this famous guy i want to thanks gratefuly : Serg090909.
He made possible to boot from Sd-Card new builds (apollo tvbox and caravn776 build) for this sort of car audio and called it "GIBROID".
With this way, you don't touch at the Nands and don't damage your system.
Insert back your original Sd-Card to boot normally, nothing is replaced in the nands when you switch to your GIBROID Sd-Card
Work has been done to backup your nand and write nand again, but for end users GIBROID from Sd-Card is a better thing and the easiest way to do.
You can find the link here :
New Serg090909 2014 Build at 26 november 2014 :
Part 1 of 4
Part 2 of 4
Part 3 of 4
Part 4 of 4
New Update at 3 december 2014 :
Caravn 4.0.4-776 500mb No bluetooth
Caravn 4.0.4-776 500mb With bluetooth
GIBROID 11 January 2014 Old Build
Part 1 of 3
Part 2 of 3
Part 3 of 3
GIBROID 01 November 2013 Old build
Part 1 of 8
Part 2 of 8
Part 3 of 8
Part 4 of 8
Part 5 of 8
Part 6 of 8
Part 7 of 8
Part 8 of 8
Video of GIBROID switching apollo tvbox to caravn776 build
UPLOADING, link available later today
Other needed files
A10 Backup sh
A10 Repack
Restore Backup
Adb Rom Backup A10 A13
Extract Dump from native firmware
PhoenixSuit
Switch Apollo Caravan
I 'll post pictures and updates to this thread and if anybody is interested in helping me reporting in English the continuous work of Serg090909 you are welcome to participate and report results here.
Thank you and have happy tests.
To readers : Respect the rules of XDA Forums and don't link to warez sites where you could found information about this
To moderators : Could it be possible to give me the right to post hyperlink or if not possible i'll wait 10 posts
To Serg090909 : I don't speak russian and Google translations are not easy so if you want to help here you'll be my guest star
HOW TO :
Install GIBROID on Sd-Card :
- Use Win32 Disk Imager (sourceforge.net/projects/win32diskimager) to Format Sd-Card and write "GIBROID-4G-11012014.img".
This image is 4g space. You can use max 32g Sd-Card, but since this operation use all the space of the Sd card you are invited to expand the rest of the Sd-card space for User space
- Use MiniTool® Partition Wizard Home Edition 8.1.1 (partitionwizard.com/free-partition-manager.html) to expand the Sd-Card space.
- Place your GIBROID Sd-card inside the GPS Slot and keep safely your original Sd-Card.
Screenshots to Switch from Apollo to Caravn :
See (Screenshots) Switch from Apollo to Caravn.rar Attachments
Backup/Write Nand for "experts" :
Dump to the Sd-Card
- Download the script a10-Backup-SH (See Attachments). Copy it in the root of the SD card
- Install SU and Android Terminal Emulator with Play Store
- Run the terminal and see the operating system prompt a dollar sign ($)
- Type su and press Enter
- Type cd/mnt/extsd
- Type sh a10-backup.sh all
Restore Dump
See "Restore Dump" attachments
Compatibility List :
Klyde KD-7200d
Erisin
N708
Post your models
...
...
Hints :
Not related to GIBROID, this sort of car audio have a Hidden Menu in WinCE6 Part.
Hidden Menu :
- Go to settings
- Press 1357 with the remote controller
- Tadaaa !
Credits and Thanks all goes to Serg090909 and all the peoples involved in explanations, informations and helps.
Reserved
Another Reserved
Last Reserved
Chandler13 said:
Last Reserved
Click to expand...
Click to collapse
good work...
i try to read the russian thread with help of google translater....
its possible and very funny
found the password after 2 hours reading the russian thread...
..............................
................
............
....
simeri said:
good work...
i try to read the russian thread with help of google translater....
its possible and very funny
found the password after 2 hours reading the russian thread...
..............................
................
............
....
Click to expand...
Click to collapse
Password (4pda)
Password
Can't seem to find the password
Could you please be so kind to help me?
Best regards
Daniel
tykketyr said:
can't seem to find the password
could you please be so kind to help me?
Best regards
daniel
Click to expand...
Click to collapse
password is - 4pda
WOW, thanks!
I installed this image onto a SD-card and it worked! It is verry stable and I didn't have any hang ups on boot! GREAT!
I have a couple of questions/remarks
The boot image is a skull and I want to change it to something more friendly Where can I find this image to change it, using total commander to do it for example?
Thing is: Now my bluetooth dongle doesnt work anymore. I have the buetooth button but I cannot turn it on (well, I can but it turns off again)
Even if I try to connect my dongle directly without HUB it doesnt respond. Is this a driver issue or do I have a wrong dongle for this image? The old serge Image did work with my dongle so can someone tell me if they have BT working and which dongle they use?
Also, the Wifi dongle doesn't work as well as it used to. I didn't have much time to figure out what happens but it connects but drops connection and doesnt work that great,. I will keep you guys informed if I know what the wifi dongle does and doesn't do.
drogert said:
WOW, thanks!
I installed this image onto a SD-card and it worked! It is verry stable and I didn't have any hang ups on boot! GREAT!
I have a couple of questions/remarks
The boot image is a skull and I want to change it to something more friendly Where can I find this image to change it, using total commander to do it for example?
Thing is: Now my bluetooth dongle doesnt work anymore. I have the buetooth button but I cannot turn it on (well, I can but it turns off again)
Even if I try to connect my dongle directly without HUB it doesnt respond. Is this a driver issue or do I have a wrong dongle for this image? The old serge Image did work with my dongle so can someone tell me if they have BT working and which dongle they use?
Also, the Wifi dongle doesn't work as well as it used to. I didn't have much time to figure out what happens but it connects but drops connection and doesnt work that great,. I will keep you guys informed if I know what the wifi dongle does and doesn't do.
Click to expand...
Click to collapse
Serg090909 is working on a new build that will be released shortly based on Apollo. The Bluetooth will work again.
Teaser
The actual build you use don't contain Bluetooth libraries, that's why you can't use Bluetooth (can be implemented manually with terminal but didn't test since a new release is coming).
Of course you can change the wallpaper as you wich like you would do with your phone and the boot image too (but i didn't digg to find the boot image actually).
I don't know what to say about your wifi, my dongle works like a charm without connection drop.. Maybe the wifi implementation was a bit buggy for some.. Let's wait for the new release !
Chandler13 said:
Serg090909 is working on a new build that will be released shortly based on Apollo. The Bluetooth will work again.
Teaser
The actual build you use don't contain Bluetooth libraries, that's why you can't use Bluetooth (can be implemented manually with terminal but didn't test since a new release is coming).
Of course you can change the wallpaper as you wich like you would do with your phone and the boot image too (but i didn't digg to find the boot image actually).
I don't know what to say about your wifi, my dongle works like a charm without connection drop.. Maybe the wifi implementation was a bit buggy for some.. Let's wait for the new release !
Click to expand...
Click to collapse
Thanks Chandler13!
You and Serge090909 have been a real help on this topic. First I thought no one would care about these android radios and I would be stuck with the stock firmware! Now, I have a radio which does so much more and it looks nice! Even if there is going to be a new release which I cannot wait to put into my radio!. The teaser looks nice and has a great look/skin. I didnt understand what this apollo was, is this the musicplayer? It looks great anyway! I was just wondering, since we are running the OS from a SD-card, is it possible to make the internal memory a little bit bigger. This way we could install apps with no bother that it runs out of memory. 2 GB would be more then enough. I am running the OS from a 32GB-Sdcard so I have room to spare :laugh:
Thanks for the tip for the background, I allready changed the background but I didn't find the boot-image either...
I allready solved the problem with the wifi-dongle. I was in my car and next to my home, but my wifi signal wasn't that great. I used my iphone to make a hotspot and it worked like no other!
drogert said:
Thanks Chandler13!
You and Serge090909 have been a real help on this topic. First I thought no one would care about these android radios and I would be stuck with the stock firmware! Now, I have a radio which does so much more and it looks nice! Even if there is going to be a new release which I cannot wait to put into my radio!. The teaser looks nice and has a great look/skin. I didnt understand what this apollo was, is this the musicplayer? It looks great anyway! I was just wondering, since we are running the OS from a SD-card, is it possible to make the internal memory a little bit bigger. This way we could install apps with no bother that it runs out of memory. 2 GB would be more then enough. I am running the OS from a 32GB-Sdcard so I have room to spare :laugh:
Thanks for the tip for the background, I allready changed the background but I didn't find the boot-image either...
I allready solved the problem with the wifi-dongle. I was in my car and next to my home, but my wifi signal wasn't that great. I used my iphone to make a hotspot and it worked like no other!
Click to expand...
Click to collapse
Apolllo Tv is another build in short, Serg090909 gived us the choice to launch the "Caravn" build, or the Apollo Build at first start till you choose to boot only one of both. Clean launcher parameters to take a look at apollo UI.
I just reported the very good work done by Serg090909 and i'm glad i'm not the only "french-english and others" to enjoy his work.
Believe me, it's a pain in the ass to traduce russian to english for a french ..
Of course you can expend the partition, i'll post more about this and making own builds.
And about a surprise i'm preparing for the WinCe part....... :angel:
To be Continued..
Chandler13 said:
Apolllo Tv is another build in short, Serg090909 gived us the choice to launch the "Caravn" build, or the Apollo Build at first start till you choose to boot only one of both. Clean launcher parameters to take a look at apollo UI.
I just reported the very good work done by Serg090909 and i'm glad i'm not the only "french-english and others" to enjoy his work.
Believe me, it's a pain in the ass to traduce russian to english for a french ..
Of course you can expend the partition, i'll post more about this and making own builds.
And about a surprise i'm preparing for the WinCe part....... :angel:
To be Continued..
Click to expand...
Click to collapse
Nice! I love surprises
I also had the honor to translate some posts from Serge into english and I must say Google translate does a hell of a job. I didn't expect that :good:
Sure, you do get a lot of jibirish but if you read carefully you can allways make out what it says.
I'm actually dutch so my french isn't that good either. So i'm glad this wasn't in french or else I would be translating my ass off
Keep me updated about your surprise and the new build. I can't wait!
Any news on this new ROM?
Low memory alarm
Chandler13 said:
Apolllo Tv is another build in short, Serg090909 gived us the choice to launch the "Caravn" build, or the Apollo Build at first start till you choose to boot only one of both. Clean launcher parameters to take a look at apollo UI.
I just reported the very good work done by Serg090909 and i'm glad i'm not the only "french-english and others" to enjoy his work.
Believe me, it's a pain in the ass to traduce russian to english for a french ..
Of course you can expend the partition, i'll post more about this and making own builds.
And about a surprise i'm preparing for the WinCe part....... :angel:
To be Continued..
Click to expand...
Click to collapse
Man, I'm very grateful for your big help! I have a N708 installed in my new civic 11 and the worst problem is that all I install in android comes to the internal memory not to the SD card, can I change this?
Move to NAND??
Hi I´m from Argentina, and I also must thank Serg090909, Chandler13 and Google translator. They made up a team that brought my unit back to life!
I had a problem with my original rom and screwed it up trying to fix it with terminal commands. It didn't boot at all and I couldn´t find a solution until this thread.
Now, I wanted to know if there is any way to flash this rom to the internal nand. I got nothing to lose since the damage is already done.
Thanks in advance!
Hi all !
Hello,
I'm french and I'm interested by this thread forum...sorry for my English.
The mine update via sd card too.
I have this model of car audio (WinCE 6 + Android 4)
Can confirm that it would work with my car radio?
Otherwise, I do not understand ... What can it do for me? boot other bluids with bluetooth support ? no affect my actual firmware ?
PS : I try this : in CE mode : Go to settings, Press 1357 with the remote controller..... but nothing appear
--> This might help people who have the same as me!
------------------------------------------------------------------------
Otherwise, I had a startup problem on android, I asked the firmware to the dealer:
I managed to restart ... but it does not have me delete all my installed apps, just allowed me to restart (I do not know how, but its work (the firmware is 210 MB).
This firmware link (with explanation) :
https://www.wetransfer.com/download...71d307e45402858f585c713020140228070442/b7d4f9
thx!
Reflashing
I think that this thread is dead. I hope I`m wrong, since is the only one that deals with firmware for the device I have.
I tried to connect my laptop to the head unit and flash the firmware to nand but i failed.
What I did:
1) power off unit
2) connect laptop to USB OTG where the wifi dongle is, using a male-male usb cable.
3) power on unit holding menu and volume knob pressed.
4) screen goes black and stays there.
5) computer detects nothing.
Possible causes:
My android system is beyond repair ( I don't think this could be the problem, since it boots perfectly with gibroid on SD card)
too many extensions for usb cable. 1from the back of the unit to the dashboard and then the "male-male" usb cable...
Many many other of which I have absolutely no Idea.
In addition to this, livesuit tells me that gibroid image is not valid.
Any ideas?
Cabezalimon said:
2) connect laptop to USB OTG where the wifi dongle is, using a male-male usb cable.
Click to expand...
Click to collapse
Hi,
This is not OTG, in order to connect to android part via USB you'll have to disassemble the unit and find a real usb otg on android board. it is located right next to the socket where the 'wifi' marked cable is connected.
stepashka said:
Hi,
This is not OTG, in order to connect to android part via USB you'll have to disassemble the unit and find a real usb otg on android board. it is located right next to the socket where the 'wifi' marked cable is connected.
Click to expand...
Click to collapse
Thanks!
I've been reading about phoenix card software. Apparently it could flash the firmware from an SD card for allwiner chips. I guess I could try that before disassembling the unit. I'll let you all know how that goes.
Hi everyone member here.
I'm a black shack 3s user, I bought this device from my friend last month with china ROM installed.
I have questions, Where and how do I get and change from china ROM to global ROM?Because I have a problem with the china ROM on my cellphone, like one of them there is no notification from the whatsapp application so I have to open the application first then there is a message, and the next problem can't open email with gmail app.
But beyond that, my cellphone doesn't get updates and stops on JoyUI 12 20.08.08.
Do you guys have a solution ?
Device model : SHARK KLE-A0
Build number : KLEN2008080CN00MQ1
dicky_ydm said:
Hi everyone member here.
I'm a black shack 3s user, I bought this device from my friend last month with china ROM installed.
I have questions, Where and how do I get and change from china ROM to global ROM?Because I have a problem with the china ROM on my cellphone, like one of them there is no notification from the whatsapp application so I have to open the application first then there is a message, and the next problem can't open email with gmail app.
But beyond that, my cellphone doesn't get updates and stops on JoyUI 12 20.08.08.
Do you guys have a solution ?
Device model : SHARK KLE-A0
Build number : KLEN2008080CN00MQ1
Click to expand...
Click to collapse
You can flash with qfil method or flashed with TWRP backup method.
slashyuz6 said:
You can flash with qfil method or flashed with TWRP backup method.
Click to expand...
Click to collapse
How do you do it sir ? And what materials should I prepare ?Thanks in advance for helping me by replying to this post
dicky_ydm said:
How do you do it sir ? And what materials should I prepare ?Thanks in advance for helping me by replying to this post
Click to expand...
Click to collapse
You can follow this guide
Firmware MP3 GLOBAL QFIL
1. We transfer the phone to EDL mode(to enter the EDL mode, you need to hold down the volume - and + at the same time and connect the cable to the phone) connect the phone to the PC. 2.Go to QFIL. It turned out with this public QPST_2.7.496 3...
forum.xda-developers.com
Do it at your own risk!!