Related
New ROM release From LegolasTheElf
LegolasTheElf said:
Stand by, I've been cooking. I took LVSW's most awesome ROM, and made some minor changes.
1) Messenger and Live Integration
2) Live Search!
3) X-Button (although, I don't like it personally )
4) Removed Cyberon
5) BIG STORAGE!
Click to expand...
Click to collapse
You will find it HERE
Enjoy people.
Upgrade Guide for WM6 Elf Edition
Enjoy
Lets keep this thread clean please....only post about this ROM.
Space reserved for any comments by our resident in spirit elf
link for high speed http mirror sent to legolas, it will be posted on the other forum!
Awesome rom
Stable and all included
Nice work
I cannot unlock Ext flash with this rom, it was accesable on Dutty's rom
Hi Chamelion any possibility to put a link for this rom, in another friendly site like megaupload, I also don't like rapidshare at all. Thanks
So far great ROM..
Thanks for not including cyberon vc it makes it much easier to get ms vc going.
Everything else seems to work just fine, but voice dialling ain't working (Error opening the short cut). This same happened with lvsw's version (and with Black 3.0).
How do I fix this?
[edit]
Never mind, just installed Cyberion Voice Dialer.cab
[/edit]
carbunco said:
Hi Chamelion any possibility to put a link for this rom, in another friendly site like megaupload, I also don't like rapidshare at all. Thanks
Click to expand...
Click to collapse
got an even friendlier site called zimuhost.getmyip.com
there's a high speed HTTP mirror posted in the forum that the original posters link links to. i'm anti rapidshare, hence me starting up the file hosting thing!
I found another problem, that I never had before When I change anything via control panel Today, then nothing really happend, only after SR.This is odd, because if I want to use SPB products, then I must SR device each time, I make any changes. Till now I did not read or search on forum about this problem (or if somebody actually have same problem as I), I going to flash device again only if problem did not dissapear, then I start looking for answers.
PS: with original LVSW last version this problem was not.
/update\
now I find some posts about this prob here till now, no sollution.
For those of you who want ms vc over headset.
Its probably best to not have the headset paired so unpair it and just add it after all the steps.
1.) Install MS VC 1.6
2.) Install attached .cab
3.) In programs launch BT Voice Command Config
4.) Check enable
5.) Click save
6.) Click Exit
7.) Turn off phone
8.) Turn on phone
9.) Pair bt headset
I take no credit for this program it was done by XCSdM and later modified by ZaJules..
This works perfect for me no other tricks or reg edits zilch, nada, nothing. You might want to set voice command to button 5 though.
Is the x-button works like it should with elf version? I mean does the exclusive click working & what build is in this ROM version? thanks in advance
today not refreshing only after SR
For those who have problem with Today settings, this is reply and solution from LegolasTheElf copied from his forum - thank you
"It's looking like that today screen issue is caused by the X-Button. To remove it, go to the Remove Programs settings applet and remove it. Because of the way this ROM is built, you can remove my additions I'm actually going to be building my ROM's in a different way than anyone else--by using mostly CABs to do the customization rather than imbedding into the ROM itself. IMHO, this is a better design as it allows people to customize their device, and reclaim storage space if they don't like the items I've included in the ROM "
sinmae said:
For those who have problem with Today settings, this is reply and solution from LegolasTheElf copied from his forum - thank you
"It's looking like that today screen issue is caused by the X-Button. To remove it, go to the Remove Programs settings applet and remove it. Because of the way this ROM is built, you can remove my additions I'm actually going to be building my ROM's in a different way than anyone else--by using mostly CABs to do the customization rather than imbedding into the ROM itself. IMHO, this is a better design as it allows people to customize their device, and reclaim storage space if they don't like the items I've included in the ROM "
Click to expand...
Click to collapse
thats good enuf! ..thanks for the info bro
sinmae said:
For those who have problem with Today settings, this is reply and solution from LegolasTheElf copied from his forum - thank you
"It's looking like that today screen issue is caused by the X-Button. To remove it, go to the Remove Programs settings applet and remove it. Because of the way this ROM is built, you can remove my additions I'm actually going to be building my ROM's in a different way than anyone else--by using mostly CABs to do the customization rather than imbedding into the ROM itself. IMHO, this is a better design as it allows people to customize their device, and reclaim storage space if they don't like the items I've included in the ROM "
Click to expand...
Click to collapse
That´s exactly what I´ve tried today and so far so good.... it´s a pity as I liked the new version of x button!! Maybe our great chefs can find a solution at some point...
Sorry. I have got a little problem.
Can I make the Windows Live Search bar for "Transparency" background from today screen?
lewisleung said:
Sorry. I have got a little problem.
Can I make the Windows Live Search bar for "Transparency" background from today screen?
Click to expand...
Click to collapse
u can't ..my way of doing it is to uninstall the apps, go to settings/remove programs ..and then install the one here http://rapidshare.com/files/32749891/WLM.rar.html
or another way, is to use sleuth developers variation of this LVSW ROM.. (it is pre-installed with the transparent windows live search bar)
kipe said:
u can't ..my way of doing it is to uninstall the apps, go to settings/remove programs ..and then install the one here http://rapidshare.com/files/32749891/WLM.rar.html
or another way, is to use sleuth developers variation of this LVSW ROM.. (it is pre-installed with the transparent windows live search bar)
Click to expand...
Click to collapse
Thanks!
um... What version is it? BETA or Non BETA?
lewisleung said:
Thanks!
um... What version is it? BETA or Non BETA?
Click to expand...
Click to collapse
version 10.6.0026.1400 ..it's non beta
Well, I WAS going to wait for a newer 1774x rom, but, given the fact that this ROM is working so well, I see no reason not to continue to use 17913 to cook my ROM..
So, hang tight for some new Elfishness in the coming days
I love the new ROM but still having slowness issues with Diamond TF3D Config.
What are the odds that Dutty would make his ROM and leave that off so we could add it as we wish?
Any possibility?
Thanks,
Mark
Post in his ROM release thread, might be able to make you a cab? I am interested too.
orangecrush said:
I love the new ROM but still having slowness issues with Diamond TF3D Config.
What are the odds that Dutty would make his ROM and leave that off so we could add it as we wish?
Any possibility?
Thanks,
Mark
Click to expand...
Click to collapse
I havent seen any slowness using tf3d config in rom, but if majority counts to leave it out i could no in future
PS Please post in my thread if you got questions releated to my roms instead of creating a new thread
lol, it is not possible that the rom is slowlier only because my tool is installed. That makes no sense. Just installing an app which is not running in background has no effect to the speed of your device.
sushilange said:
lol, it is not possible that the rom is slowlier only because my tool is installed. That makes no sense. Just installing an app which is not running in background has no effect to the speed of your device.
Click to expand...
Click to collapse
agree!
regards,
markus
2x Agree!!!
It's complete non-sense...
But besides that, this kind of issues should be raised inside the "Diamond TF3D config" thread, because if there was an issue with this application, it had to do with the aplication itself and not with the rom...
HastaSSSS
s1rl4ncel0t said:
2x Agree!!!
It's complete non-sense...
But besides that, this kind of issues should be raised inside the "Diamond TF3D config" thread, because if there was an issue with this application, it had to do with the aplication itself and not with the rom...
HastaSSSS
Click to expand...
Click to collapse
But if the application is built into the ROM and therefore ends up running, then the end problem is the same.
duttythroy said:
PS Please post in my thread if you got questions releated to my roms instead of creating a new thread
Click to expand...
Click to collapse
Sorry, I just didn't want to clutter up your thread with other questions....
sushilange said:
lol, it is not possible that the rom is slowlier only because my tool is installed. That makes no sense. Just installing an app which is not running in background has no effect to the speed of your device.
Click to expand...
Click to collapse
I beg to differ. If you read your thread, there were a couple of others that noticed it.
And on top of that... I installed the 1.3 or 1.4 ROM and had no issues. The moment I installed the TF3D configuration, I had a pause everytime I could hit contacts in the contact app.
I tried to uninstall it and it wouldn't work so I installed the new 1.93 ROM from HTC. I had no hesitation.
I then reinstalled Dutty's 1.5 and immediately had the same hesitation.
The program is great and perhaps it's just me but everytime I install it I have a hesitation.
I'm about to install ver 1.4 so we'll see if it works again....
Mark
Opps, can't.... version 1.4 has it also.
I'll play around and see....
Thanks,
Mark
ehm...only chaning the theme makes manila a bit slow and maybe some tweaks are making some devices slow.
But NOONE has the issue, that just after installing my tool or just after running and exiting my tool the device got slowlier. It is absolutely impossible.
sushilange said:
ehm...only chaning the theme makes manila a bit slow and maybe some tweaks are making some devices slow.
But NOONE has the issue, that just after installing my tool or just after running and exiting my tool the device got slowlier. It is absolutely impossible.
Click to expand...
Click to collapse
It may be impossible but check out post 556 and 559 on your thread.... there's two more people having the same problem. I'm not dissing your work at all.... I think the software is fantastic, I'm just making sure I'm not the only one having a problem and if I am, I want to fix it.
Now, on to something else you said... I DID install a theme when I originally installed it. However, I've installed it since then with no themes and still find it sluggish.
I just reinstalled a completely different ROM (Diamond Project) just to see if I would have a problem. The problem is still there and I just noticed that it has the TF3D program built into it.
I'll try some other ROMs and see if that changes it.
Thanks,
Mark
sushilange said:
ehm...only chaning the theme makes manila a bit slow and maybe some tweaks are making some devices slow.
But NOONE has the issue, that just after installing my tool or just after running and exiting my tool the device got slowlier. It is absolutely impossible.
Click to expand...
Click to collapse
I found out what the problem is.... You were right. It's not the TF3D program making it slow, it's actually when you hit the second tab (what is it, people?) and then hit all people.
There is a delay before pulling up a contact list.
Tonight I've installed 4 different ROMS and until I installed the last one which actually has "contact" in place of "phone" in the phone app, I realized if you click on contact, your contacts come up IMMEDIATELY.
If you hit people and then click on "all people" to pull up contacts, it DRAGS out. Each ROM has a different speed on pulling up the contacts but nonetheless, it's the damn TF3D software from HTC, not the TF3D config program you made.
My apologies, I was wrong and you were right... I'm starting to understand why so many people don't like the memory hog TF3D interface.
Looks cool but what a slow PIA.
Thanks, just thought I'd let you know....
Mark
When I first read this thread I thought surely you are confusing TouchFLO 3D itself with the TF3D Config utilty! You do realise TouchFLO 3D is simple to disable? Just got to Start>Settings>Today>Items and uncheck TouchFLO 3D.
logger said:
When I first read this thread I thought surely you are confusing TouchFLO 3D itself with the TF3D Config utilty! You do realise TouchFLO 3D is simple to disable? Just got to Start>Settings>Today>Items and uncheck TouchFLO 3D.
Click to expand...
Click to collapse
Yes sir, I did know you can disable it. It's just that I didn't notice it was sluggish until I added the config program so I assumed (yeah, I know....lol) that was the problem.
All is well now.
Thanks,
Mark
OK guys here it is... Release 2.1
http://www.megaupload.com/?d=BK0TO546
Mirror:
http://www.4shared.com/file/71823892/48b175e6/v21JB.html
Sorry I am still short on time but this 2.1 release addresses the issues reported...
I will keep it short for now:
SYS & XIP 20931 wiith VoIP...
Alltel 3.10 OEM Base...
Latest Jade OEMs...
My OEM selections from PPCKitchen...
Manila2D hacked for custom cities...
##codes in dialer enabled no ## code folder ncessary...(some added Pro drivers as well)
comon issues with Jade OEMs fixed (BT, baclight.exe, deviceinfo, etc)
Carrier OEMs choose (most from PPCGeeks Sprint one Tweaked a bit more) choose only one of these or none and use dcd carrier cabs...
(SPRINT Users I recommend using carrier selection in the kitchen)
Slide to answer delay in dialer addressed...
Full kernel Mode Enabled (Cert verify disabled as well)
NEW IE 6 beta available (fixed and fully functional, flash enabled... very stable so far too )
SYS selection updated
Diamond theme provxml fixed
build issues fixed (cab and provxml processing was broken)
Threaded SMS issues fixed!
UC enabled...
Allow customizations for Opera and Google Maps...
Pending....
Updated OEM selections from build os (just gotta write option.xml's)...
more optimizations and tweak selection...
Ensure no one encounters contacts issue... I haven't seen it but if people could test for it!
Credits to Vet (of course), ppckitchen.org, etc. XDA & PPCGeejs gurus... (sorry short on time)
Hi guys and gals....
I am very sorry that I have not been around or gotten you the updates promised... The honest truth is that I have been going through a lot of difficulties in my personal/financial life and work so I just dropped the ball here... I am working my way back and looking forward to give you guys a new WM6.1 kitchen and will look at the WM6.5 one and see if I can add any value with my version of one of those too... for those who are having trouble I will try and catch up in the next week or so if it is something urgent feel free to PM me.
Again my sincere apologies and hope that everyone understand that I didn't mean to mislead just circumstances have kept me from delivering...
Reserved for updates.....
Reserved for updates...
Didnt work can not reply to text messages
cwest06 said:
Didnt work can not reply to text messages
Click to expand...
Click to collapse
what carrier are u using?
m3Jorge said:
what carrier are u using?
Click to expand...
Click to collapse
Sprint.....
Now THAT is VERY strange... as it is specially optimized for sprint... I must have screwed something up when I adapted the kitchen for popular use rather than just my personal use... I have done some more cleanup/tweaks and updated to build 20931 and will put that up tonight... and will test it throughly to ensure it all works
Just to help my testing can you let me know what selections you made when building? and if you did any modifications to any folders as well...
Thanks!
Im using sprint as well. i wasnt able to install cabs and active sync wasnt connecting. i only unchecked the pim backup utility.
ldostang said:
Im using sprint as well. i wasnt able to install cabs and active sync wasnt connecting. i only unchecked the pim backup utility.
Click to expand...
Click to collapse
Same as him......
Hello,
I also was unable to install anything after flashing. Anything that I tried to install would give me an installation unsuccessful error.
Active sync was spotty, it would just drop connection and then reconnect.
I am on Sprint as well.
Regards,
Jus'
ldostang said:
Im using sprint as well. i wasnt able to install cabs and active sync wasnt connecting. i only unchecked the pim backup utility.
Click to expand...
Click to collapse
Must be some of my reg tweaks... I will ensure proper defaults are in-place for when they are not selected
Device Info
How did you fix the Device Info issue? I have been trying to figure that out for a while now.
I have Sprint as well ran into not being able to connect to Data.
Hey m3jorge, I'm really liking this Rom you put out. Totally dig the modded m2d theme you put on with the white underlay on black icons, but I can't change the top/bottom bars to matching diamond(black/grey) in Appearance under Settings, also get the can't install cab error, and no active sync errors others are also experiencing. Other than those 2 issues, everything works and looks nice. Good job and Thanks.
btw... I did all the selections and minimal selections trying to identify the reason why folder won't let let cabs install, but no luck.
Vogue/Sprint
Ok I think I've found the root of the issue about the cabs not installing... quick question though for those having the issue...
Did Customizations run? or try to run? and did you let customizations complete... thanks...
m3Jorge said:
Ok I think I've found the root of the issue about the cabs not installing... quick question though for those having the issue...
Did Customizations run? or try to run? and did you let customizations complete... thanks...
Click to expand...
Click to collapse
Did you resolve the contacts issue with 20924/20931?
if so, what was the cause?
m3Jorge said:
Ok I think I've found the root of the issue about the cabs not installing... quick question though for those having the issue...
Did Customizations run? or try to run? and did you let customizations complete... thanks...
Click to expand...
Click to collapse
Yes I let it run
vetvito said:
Did you resolve the contacts issue with 20924/20931?
if so, what was the cause?
Click to expand...
Click to collapse
I believe I have what i did is I took the VIRSER_ATCMD.dll (along with the other VIRSER dlls) and fuart.exe from the Alltel 3.10... I found that if the two versions don't match all kind of things with active sync become unhappy
cwest06 said:
Yes I let it run
Click to expand...
Click to collapse
ok that is the weirdest thing... Customizations installs like 3 cabs... but cabs don't work after that? or are we talking about carrier cabs don;t work???
carrier(sprint) or any cabs won't install, because I verified no internet access via testing youtube app and get no videos to load up. gonna reflash and skip customizations to see if that is a factor in cabs not installing.
It started with NRG's rom redone by ricky & stylez... Thought maybe it was ROM specific... so I switched to NRG Latest version (not modded by rick & stylez)... and the same thing has started happening.
Whenever I try to open anything (messaging, celetask, commanager, etc)... I get a low/insufficient memory error)... sometimes the phone freezes up at this point, and I have to unplug the battery to restart it.
Sometimes if I get this error, i can still get into celetask, and end the "htcactivitylogexe.exe" and it frees up nearly ALL of my memory.
OMG same problem here lol
so i went back to Rickys, its good so far :]
Same thing here.
lubs said:
Same thing here.
Click to expand...
Click to collapse
No such thing just seen your other post i.m.o view, strange how it's a small few yet thousands of downloadz
If you read the forum for the remake of NRGZ rose by rick&stylz they have a solution in the registry to remove that hassel
nic3a said:
If you read the forum for the remake of NRGZ rose by rick&stylz they have a solution in the registry to remove that hassel
Click to expand...
Click to collapse
I searched the thread for "HTCACTIVITYLOGEXE.EXE", no results... and I searched for registry, and none of the posts referred to this problem? Could you post a shortcut?
I cant find much on the subject either... i am running the stock 6.5 rom and getting the error.... My google search on it brought me here... Would love a fix for it...
Originally Posted by fletch319
I did some digging through the rest of the forums and it looks like there are numerous versions of this HTCActivityLogExe.exe app. A lot of them have an enormous memory leak and some don't. I was also able to track down that this process gets launched when you use the HTCSlidingHomePanel. The weatherupdateservice gets called which in turns loads the HTCactivity app.
For those who just want their phone to run without running out of memory every 5 txt's do the following:
Go to HKEY Current User\Software\HTC\Bootlauncher\Apps\HTCSlidingPane l and delete the "Module" key which has a value referencing the weather app. When you reboot, WeatherApp.exe, WeatherUpdateService.exe and HTCActivityLog.exe no longer load. Apparently they are all part of the weather app.
So perhaps those who are not having issues are not using this home screen?
ADD; I found HTCSlidingPanel under "services", NOT Apps
I cant find HKEY Current User\Software\HTC\Bootlauncher on my htc excalibur running rom V24 from Rickywatt... does anyone know where it is? or how to disable WeatherApp.exe, WeatherUpdateService.exe and HTCActivityLog.exe on the excalibur (if its a different procedure all together).
Wh0w4 said:
I cant find HKEY Current User\Software\HTC\Bootlauncher on my htc excalibur running rom V24 from Rickywatt... does anyone know where it is? or how to disable WeatherApp.exe, WeatherUpdateService.exe and HTCActivityLog.exe on the excalibur (if its a different procedure all together).
Click to expand...
Click to collapse
You can disable it via the registry by changing the Dword Value of course or your delete WeatherApp.exe, WeatherUpdateService.exe
Ok, I decided to write new thread because most of the rom makers I pm to didn't answer me at all. Some kind of secrets or whatever. I think we should help each other to improve our ROM's but maybe I'm wrong.
I have some issues in my owe ROM which I can't really fix. Maybe someone will know the solution
1. Some ROM makers wrote in their changelogs that now CommMgr is really closing without being on the process list all the time? How?
2. I'm using EZinput keyboard 2.0.33633 full qwerty and two keyboards should be available: full qwerty and phone keyboard. Only the first one is present in the system (the second one now is standard MS keyboard instead of phone keyboard 2.0 EZinput). Why? I changed the EXT package many times to make sure it's ok and all the time the same issue...
3. Is there a working method to change system rings to wav? Every time I do it then they doesn't work. Do I have to change also some registry value?
4. Windows Media Player dosen't play any videos. I changed mHub and mHubVO into some other versions but still no efect. What else could be the reason?
That's all what I'd love to know to make my ROM better
Thanks in advice!
Ok, I see that non of the grate, admired here rom makers are going to help me. Sweet. Anyway... I made a little step ahead with problem no2.
I know how to manually switch between those keyboards using registry entries [HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
CurrentSIP set to a00 is Phone Keypad and d00 for fullQWERTY. But still it's impossible to change it in menu (WM6.5 21725)
That's all I want to share with, maybe it will help someone. Should I expect some respond? I don't think so :]
michal_banszel said:
Ok, I see that non of the grate, admired here rom makers are going to help me. Sweet. Anyway... I made a little step ahead with problem no2.
I know how to manually switch between those keyboards using registry entries [HKEY_LOCAL_MACHINE\Software\HTC\ezsip]
CurrentSIP set to a00 is Phone Keypad and d00 for fullQWERTY. But still it's impossible to change it in menu (WM6.5 21725)
That's all I want to share with, maybe it will help someone. Should I expect some respond? I don't think so :]
Click to expand...
Click to collapse
Dude, about the comm manager, I don't know which version of comm manager are u using. But I got my comm manager working good n closing when clicked on x button. All I can say is don't use any new version like 2.8 or topaz comm manager. Use the 2.7.1.4 version. It's OG diamond comm manager n works nice. I'm using the same version.
Thanks buddy Actually I'm using 2.8.1. I will switch to 2.7.1.4 as u said.
The keyboard is still my biggest problem. I wonder what's wrong that I cannot switch between Full qwerty and phone keypad in the sip menu bar.
michal_banszel said:
Thanks buddy Actually I'm using 2.8.1. I will switch to 2.7.1.4 as u said.
The keyboard is still my biggest problem. I wonder what's wrong that I cannot switch between Full qwerty and phone keypad in the sip menu bar.
Click to expand...
Click to collapse
Did u try the GEN Y sip menu..??
I heard someone there saying that if we have the touchflo installed, then only we can change between the phone pad n qwerty board. But touchflo brings some more diff probs elsewhere.
Surprising issue this.. Coz it works perfectly fine with ezinput 1.
My touchflo is completly deleted. All registry entries and app. because in WM6.5 it's totally useless.'
Yes, it is surprising. I checked registry entries and everything seems to be fine... but it's not
michal_banszel said:
My touchflo is completly deleted. All registry entries and app. because in WM6.5 it's totally useless.'
Yes, it is surprising. I checked registry entries and everything seems to be fine... but it's not
Click to expand...
Click to collapse
do u have a package of touchflo..?? If not, I'll mail it to you. Try to import it n see if it works. I had in the previous build of this kitchen.
Yes, I have. Ok, I'll try to cook it with TouchFlo but how is touchflo connected with availability to change keyboard from context menu?
michal_banszel said:
Yes, I have. Ok, I'll try to cook it with TouchFlo but how is touchflo connected with availability to change keyboard from context menu?
Click to expand...
Click to collapse
i dont know..check gen y thread..u will definitely get moe help there. its surely been talked about in that thread.
I think I know the answer. Ability to change between keyboards wouldn't work on wm6.5 without HTC menuenhancement.
michal_banszel said:
I think I know the answer. Ability to change between keyboards wouldn't work on wm6.5 without HTC menuenhancement.
Click to expand...
Click to collapse
nope its not only that, u definitly need the touchflo package, but that package conlicts with wm 6.5
the only thing we can do is wait for HTC to bring out its first WM 6.5 rom for diamond2, then we can take the new touchflo or ezinput package from that rom
about the windows media player issue, make sure u have the DShow OEM in your rom
yozgatg said:
nope its not only that, u definitly need the
about the windows media player issue, make sure u have the DShow OEM in your rom
Click to expand...
Click to collapse
I do have it - DShow_2_0_19141126_0 - or maybe there is some newer? Or older working better?
michal_banszel said:
I do have it - DShow_2_0_19141126_0 - or maybe there is some newer? Or older working better?
Click to expand...
Click to collapse
there a slight newer one in my kitchen, here are the oems i use for multimedia:
- DShow_2_00_19143426_0
- mHub_6_57_080529_E0
- mHubVO_1_75_090515_X0
u should also check the following drivers in OEMDrivers:
- qtv.dll
- qtv_mp4_decoder.dll
try replacing those drivers
Can you please share with all those files? Please
BTW which ConcurrenceMGR are u using? 1_5_19113219_0000?
michal_banszel said:
Can you please share with all those files? Please
BTW which ConcurrenceMGR are u using? 1_5_19113219_0000?
Click to expand...
Click to collapse
just check the link in my signature, i released the full kitchen of my rom
Thanks man!
Ok, it's me again
And again some damn issues in my kitchen
For last two days I was looking for the source of why my Face down mute ring stopped working. In registry everything is fine. Exept of registry, is there any dll library or something responsible for that? Also when I'm in windows file explorere and want to copy the file from IS to main memory (I do tap on "Copy")and then tap on the menu to choose the location then it crashed.
Any ideas for soulution those two problems?
PS. One more thing I forgot... I used to have my clock and calendar to set up automaticly the date and time after HR but now it seems to be gone... Is it up to network type currently using? GPRS/3G? Or maybe some registry value?
michal_banszel said:
Ok, it's me again
And again some damn issues in my kitchen
For last two days I was looking for the source of why my Face down mute ring stopped working. In registry everything is fine. Exept of registry, is there any dll library or something responsible for that? Also when I'm in windows file explorere and want to copy the file from IS to main memory (I do tap on "Copy")and then tap on the menu to choose the location then it crashed.
Any ideas for soulution those two problems?
PS. One more thing I forgot... I used to have my clock and calendar to set up automaticly the date and time after HR but now it seems to be gone... Is it up to network type currently using? GPRS/3G? Or maybe some registry value?
Click to expand...
Click to collapse
Hey Michal,
found something that may help with the face down mute issue
pranavsethi said:
Hi,
Does mute on face down work?
Its not working on mine TD and would be glad if someone can get me to know how to get it working.
Even Checked HKLM, and there is no entry in Phone sector for Face down mute.
Kindly advise.
.............................
Pranav
Click to expand...
Click to collapse
cednicek said:
Try copy reg code from windows mobile 6.1, where it worked... I think i could work.
CODE: HKEY_LOCAL_MACHINE\Software\HTC\PHONE and change FaceDownMuteRing to 0 (default is 1)
Anybody has this problem?
Click to expand...
Click to collapse
Hope this helps
Thanks dude but it doesn't work. I was trying with both, 0 and 1 to make sure but still no effect. Friend of mine checked some others 6.5 ROM's and it seems that it doesn't work in any of them.
I found out that automatic time and date set works only if 3G/SHDPA network is available. So this question is out of date.
If anyone find the solution with face down mute ring then please let me know.
Another issue that I was hoping to solve is contact list popping up every time after SR. So in titanium softkeys registry I changed SK1URL into HTCActionScreen. And now... HTCActionScreen popping up every time after SR. Any solution for that?