I'M NOT RESPONSIBLE FOR ANY DAMAGE YOU DO TOU YOUR PHONE HOWEVER I WILL DO AS MUCH AS I CAN TO HELP YOU FIX IT
GSM ONLY!!! NO CMDA USERS
Note: This TUT was written from my expeience with a DIAM100!!! I do not know if the files included in this TUT are compatible with Diamonds other than the 100
This TUT will cover complete flashing of everything on your Diamond, I wrote this cause it took me 2 hours to get my Diamond hacked so i could reap the benefits of the community:
1. Hard-SPL - Post 1 & 2
2. Rom - Post 3
3. Radio - Post 3
__________________________________________________________
Note: Doing this will Hard Reset your phone, any data not on your 4GB internal will be deleted!!! If you want to make a backup, I recomend you use SPB Backup Free Trial and save the EXE created to your 4GB
__________________________________________________________
What Is Hard-SPL?
Hard SPL in computer terms is the BIOS, it lets you recover your device if you incorectly flash your device. This bootloader was developed by OliNex and comes in to flavours Dev and Signed, i have attached the files at the bottom of this thread. It is essential if you want to put cooked material on your device. if you install this IT WILL VOID YOUR WARRANTY, how ever, you can still flash the Stock SPL back should your diamond need repairing.
How Do I Flash It?
If you want to restore the stock SPL, I recomend you make a note of which version you have, this is easy and simple
1. Reset your Diamond
2. Press and hold the Volume Down button on left side of your device, it shold display some numbers and some text, the number should be between 1.23 and 1.37
3. To get back to Winmo, simply press the reset button
With the OliNex SPL's, all you need to do is charge your Diamond to 50% or more, connect via activesync / Device manager on a 32 BIT WINDOWS SYSTEM (XP Only) !!!
Create a new folder with no spaces in it, E.G "C:\\Diamimg_OliNex" , unzip the files you have downloaded from the bottom of the page into this new folder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then, with your Diamond connected, run "RomUpdateUtility.EXE" and follow the on screen intructions
IF YOU UNPLUG YOUR DIAMOND WHILE THIS APPLOCATION IS RUNNING, YOU WILL BRICK YOUR DEVICE!!!
The computer should be displaying a progress bar, it should jump from 0% to 100%
IT WON'T TAKE 10 MINS LIKE IT SAYS IT WILL
A message should appear sayying that your phone has been sucessfully updated
When you see this, Congrats, You have flashed Hard-SPL to your phone
To confirm this, simply repeat the steps you did to check your Stock SPL, It should say, 1.4* OliNex
Flashing back to stock SPL is in the next post
Note: Doing this will Hard Reset your phone, any data not on your 4GB internal will be deleted!!! If you want to make a backup, I recomend you use SPB Backup Free Trial and save the EXE created to your 4GB
__________________________________________________________
To flash back to the Stock SPL, YOU MUST FIRST FLASH THE STOCK ROM AND RADIO, SPL MUST BE FLASHED LAST!!! You will also need the SPL pack which is included in the first post, when we flashed Hard SPL, I mentiod the number of your Stock SPL, if you still have it you can the Stock SPL. This useful because if your supplier is trying to fix it, and bumps into bootloader, it will say "1.40 OliNex", and he will say "This has voided your Warranty". If it says "1.37 HTC" he will say "I will repair it now". Anyway, to replace the Hard SPL, there are two ways. If you have the Un-Signed SPL, you have to use the file "Un Signed SPL Restorer", when you have chosen your Stock SPL, extract the SPL Restorer to a top level of a Local HDD, copy the SPL file into this folder with the other files. Then rename it "RUU_Signed.NBH" without the quotes. Run "RomUpdateUtility.EXE" and follow the on screen intructions
IF YOU UNPLUG YOUR DIAMOND WHILE THIS APPLOCATION IS RUNNING, YOU WILL BRICK YOUR DEVICE!!!
The computer should be displaying a progress bar, it should jump from 0% to 100%
IT WON'T TAKE 10 MINS LIKE IT SAYS IT WILL
A message should appear sayying that your phone has been sucessfully updated
When you see this, Congrats, You have flashed Stock-SPL to your phone and deleted Hard-SPL Un Signed
If you have a signed OliNex SPL, the restoration process is slightly different
The proces is exactly the same except instead of using "Un Signed Hard SPL Restorer", you simply download "Stock Restorer For Signed"
Flashing ROM's
Ok, this is the easy one
There are several methods of flashing ROM's, Using RUU, MTTY and my personal fave, Internal Storage Method, I will cover all of these in this post
Some ROM's I recomend
1. The latest of Winmo products, L3V5Y's 6.5.3 Build 28*** ROM, it's fast, stable and light! Only a 60MB download, which is pretty good. This requires Unsigned Hard SPL
2. GEN Y's 6.1 Manila Rom, this rom is very stable. It hasn't got the 6.5 ROM in it, but it has the latest version of Manila / Touch Flo (The Fancy Interface That Is Installed On The Stock ROM)
1: Internal Storge
This is the easiest, quickest and safest way to flash ROM's, the ROM is a single file (*.NBH), you need to rename it "DIAMIMG.NBH" without quotes
then follow these steps to copy over
1. Plug your phone into your PC
2. Select "Disk Drive"
3. Copy DIAMIMG.NBH to the top level of your phone
When this has completed copying, you must reset and hold Volume down and the Back button, you will see a quick Tri Colour screen and then you will see "Loading" the screen will change and it will say "Press Power Button To Start Update Image", after you press the power button a progress bar will appear at the bottom of the screen, when it has completed, it will say "Update Sucessful", peform a soft reset and enjoy your new ROM!
2: MTTY
MTTY is HTC app that lets you modify the contents of your devices ROM from a command script, you can't actually flash a rom with it, but you can prepare your device with it, if you only flash with internal flash you may get a bad flash, for example a read only file may have copied incorrectly and corrupted the ROM memory. MTTY will format and fix this.
FOR VISTA + WIN 7 6 BIT SYSTEMS, SEE BOTTOM FOR DRIVER INSTALL OTHER WISE YOU MAY DAMAGE YOUR DEVICE!!!
To prepare your Diamond for PC or Storage flashing:
YOU MUST HAVE HARD-SPL ON YOUR DIAMOND
Internal:
After you have downloaded your new ROM, copy it to your Internal Storage and rename DIAMIMG.NBH like you did with the method above. You need to download MTTY which is attached to this post, place your device in bootloader (Reset and Vol Down) Run MTTY after extracting to a top level of a local HDD, a list of options should appear, change it from Com1 to USB, if USB is not on this list, try disabling "Allow USB Connections" in activesync and restart MTTY, when you have selected USB, MTTY will start, just click ok when a option window pops up, after this, wait for a window to pop up and press Enter on your PC keyboard, CMD or USB should appear. I will write the commands then a line below I will write what they do
set 14 0
This tells MTTY to reboot when complete
task 29
MTTY will format your ROM
NOTE: after typing task 8 (Below), very quickly unplug USB and hold down Volume Down and Back to trigger flash
task 8
Reboot Device
PC:
Same Layout As Above
set 14 0
This tells MTTY to reboot when complete
task 29
MTTY will format your ROM
NOTE: after typing task 8 (Below), very quickly unplug USB and hold down Volume Down to trigger Bootloader Mode
task 8
Reboot Device
Plug back into PC, serial should change to USB
Run RUU.exe (Included With Rom) and follow on screen steps (This one will take 10 mins)
MTTY On X64 Bit Systems
Before you do MTTY with a Vista / Win 7 64 Bit system, you must install drivers
First, disable driver signing HERE
Then download and install drivers from HERE
RUU
Note: if the rom is an *.EXE, you dont need to do this as that Rom is an RUU
1. Download your Rom
2. Download the "DiamondCustomRUU.ZIP" from my next post
3. Copy both to the same folder
4. Connect phone via ASync or WMDM
5. Run the Ruu .EXE
6. Follow the steps in my next post
Radio:
This bit is about flashing your radio, people flash their radio to get better reception in the area, if your diamond was sold to you as a TRI Band phone, you can upgrade it to QAUD Band for free
THIS DOES NOT UNLOCK YOUR RADIO FOR USE WITH OTHER SIM CARDS!!!
There are plenty of Radios floating around, one recomended around the forum is 1.00.25.05, this enables QUAD Band, use little power and gets great reception. You can check your radio when your phone is booting, it's the first line of red text. If you have radio version 1.00.25.05, or if you get good signal and good quality voice calls, you don't have to update it
DO NOT TRY AND FLASH A RADIO FROM ANOTHER PHONE!!!
How To Update:
First download a Radio from here
Then download RUU from the bottom of this page
Extract both to the same folder
Run RUU, Check the box and click next
After you have done the things listed in the picture, tick the checkbox and click next
Click Update
The RUU will tell you what version you are going from to what version you are going to
Click Next
DON'T UNPLUG YOUR DIAMOND OR DO ANYTHING ON YOU PC WHILE THE RADIO IS UPDATING
When PC reaches 100% DON'T UNPLUG YOUR DIAMOND, Click finish and wait for your Diamond to reset
Acknowledgements
OliNex - Hard SPL Is Briliant
MysticGenius - The Definitive MTTY Thread
Tom_Codon - CustomRUU Will flash any thing and everything
Modmydiamond - Thanks for the pics
Microsoft - Winmo Isn't Great Out The Box, But Is A Brilliant Software Base, Without You, We Would All Have to Get iPhones
The XDA Community - Stuff I Have Just Picked Up From Browsing This Great Forum
Ralphusion - Links For X64 Systems Cause I'm To Lazy To Find Them Myself
ElCondor - Thanks For The Wiki Link
And Finaly: HTC - Now Where Do I Start?
errrrrr
this is a waste of space. everybody knows these stuff. mods!!! do we really need this?
bevoc said:
this is a waste of space. everybody knows these stuff. mods!!! do we really need this?
Click to expand...
Click to collapse
when i tried to get custom on my diamond, it took 2 hours, this tut by tnyynt is good, but complex, i had to read 3 times before I fully understood
bevoc said:
this is a waste of space. everybody knows these stuff. mods!!! do we really need this?
Click to expand...
Click to collapse
How about you shut up and don't read it if you are so bothered by it? This is a forum, and anyone can post whatever they like, as long as it is within the rules.
Good job, Badwolve1!
leonatan25 said:
How about you shut up and don't read it if you are so bothered by it? This is a forum, and anyone can post whatever they like, as long as it is within the rules.
Good job, Badwolve1!
Click to expand...
Click to collapse
many thanks
Great work, this is really usefull for people having trouble getting their Diamond updated and flashed.
When I came here I really needed something like this, because all information was cluttered all around the forum. Now we have it at one place.
bevoc said:
this is a waste of space. everybody knows these stuff. mods!!! do we really need this?
Click to expand...
Click to collapse
And you are even asking for the mods to clean this...
Go think before you post these kind of answers.
Badwolve1 I think it's a good idea to put this in the wiki,
If you don't know how it works I can do it for you with a link to this thread.
This is good work and should be rewarded, we should have these guides for every device!
Having this information all in one thread is really a relieve, tx for your efforts Badwolve!.
Maybe this forum will end up now with a little less ' help....my diamond is bricked' threads, so no waste but gain of space huh
Badwolve1 said:
Flashing ROM's
1: Internal Storge
This is the easiest, quickest and safest way to flash ROM's, the ROM is a single file (*.NBH), you need to rename it "DIAMIMG.NBH" without quotes and copy it to the top level of Internal Storage. When this has completed copying, you must reset and hold Volume down and the Back button, you will see a quick Tri Colour screen and then you will see "Loading" the screen will change and it will say "Press Power Button To Start Update Image", after you press the power button a progress bar will appear at the bottom of the screen, when it has completed, it will say "Update Sucessful", peform a soft reset and enjoy your new ROM!
Click to expand...
Click to collapse
The Loading screen stands there for "forever". I've been waiting for more then 20 mins and the Loading... screen is not changing. What seems to be the problem?
Mtty and windows 7 (x64)
Badwolve1 said:
2: MTTY
MTTY is HTC app that lets you modify the contents of your devices ROM from a command script, you can't actually flash a rom with it, but you can prepare your device with it, if you only flash with internal flash you may get a bad flash, for example a read only file may have copied incorrectly and corrupted the ROM memory. MTTY will format and fix this.
XP ONLY!!!
Click to expand...
Click to collapse
Badwolve - Good to see your consolidated tutorial. Just wanted to share that mtty works directly with Windows 7 (x64) as well now. There are two possible methods for this (tried both and both work):
Eugenia's signed x64 drivers
Disabling/Ignoring driver signing using gpedit
djandreski said:
The Loading screen stands there for "forever". I've been waiting for more then 20 mins and the Loading... screen is not changing. What seems to be the problem?
Click to expand...
Click to collapse
Hmm, seems like your device hasn't been hard spl'd. Can you confirm that you've done so?
My device is HardSPL-ed I've installed 1.30 OliNex, and on the three color screen there is a text that says "1.30 OliNex" so it is spl-ed
And when I try to Flash from PC the custom RUU and phone bar are stuck at 0% and after a wile i got 262 error on ruu. see the picture.
djandreski said:
My device is HardSPL-ed I've installed 1.30 OliNex, and on the three color screen there is a text that says "1.30 OliNex" so it is spl-ed
And when I try to Flash from PC the custom RUU and phone bar are stuck at 0% and after a wile i got 262 error on ruu. see the picture.
Click to expand...
Click to collapse
You can check this thread http://forum.xda-developers.com/showthread.php?t=409425 for more info on these errors
ralphusion said:
Badwolve - Good to see your consolidated tutorial. Just wanted to share that mtty works directly with Windows 7 (x64) as well now. There are two possible methods for this (tried both and both work):
Eugenia's signed x64 drivers
Disabling/Ignoring driver signing using gpedit
Click to expand...
Click to collapse
]
Thanks for replying, I did know that MTTY will work with 7 + vista, x86 + x64, i just didn't want to make it all complicated
i will put how to do 64 7 + vista in somewhere, thanks for the links
Badwolve1
djandreski said:
My device is HardSPL-ed I've installed 1.30 OliNex, and on the three color screen there is a text that says "1.30 OliNex" so it is spl-ed
And when I try to Flash from PC the custom RUU and phone bar are stuck at 0% and after a wile i got 262 error on ruu. see the picture.
Click to expand...
Click to collapse
May i ask what rom you are using?
You will probably need Dev Hard SPL as not many Roms are signed by OliNex, i this problem persists ater install of Dev SPL, Try internal flash
Good Luck
Badwolve1
Badwolve1 said:
May i ask what rom you are using?
You will probably need Dev Hard SPL as not many Roms are signed by OliNex, i this problem persists ater install of Dev SPL, Try internal flash
Good Luck
Badwolve1
Click to expand...
Click to collapse
I started a new thread http://forum.xda-developers.com/showthread.php?t=611146 where the problem is detailed explained.
Please review that thread and help me if you can.
this is great!! but im kinda confused with the part where you said
the top of your internal storage?...
do u mean the mobile device when it pops up in ur pc or removable disk?.....thnks!
Related
Hi!
I was using Newplow's WM6 038 ROM with my N560.
Yesterday I tried to write another ROM(WM6 038 with 8MB pagepool) but during update got an error.. It said it just failed.
Now my N560 is stuck on booting screen(people climbing mountain..)
I tried Warm, Cold, Hard reset but with no luck.
Even the power button doesn't work so I had to remove battery. When I insert battery it powers on by itself.
I can enter bootloader screen by pushing power+record button so I tried to copy rom image file to SD card but it doesn't work.
I tried two ROMs(OS_213U.nbf from Original WM5 ROM and Newplow's) and 3 SD Cards(2GB SD, 1GB MicroSD with Adopter, 16GB SDHC)
Is there any recovery tutorial in bootloader mode?
Help me please!
Sorry for my English.
Have you tried flashing a ROM through the computer rather than the memory card? Try going into bootloader and flashing that way rather than the card.
The pagepool ROM is meant for N560s that have been upgraded to 128Mb RAM... have you upgraded the internal RAM to 128Mb? If you have not, then this may have caused your problem.
I had this problem when flashing to 038 normal RAM (from 035). A hard reset reset to the normal start screen, but nothing worked. However, trying a new burn with the Loox flash tool restarted the process and it worked. I found the cure was to make sure you hard reset the N560 before doing a burn. It appears to be that you have to do this to release enough RAM for the burn program to reside and for "working" storage. You may not have done this.
I suggest you try simply re-running the flashtool with SD/SDHC cards removed, battery in place, on the cradle via your PC, even though it appears stuck. The signals coming from the USB link may wake up the bootloader routine in the N560?
Solved the problem! Thanks for your comments!
I asked same question in Newplow's guestbook and the person who made pagepool rom answered. I used MTTY to revive my pda.
What I did is in below post. need translation
http://4pda.ru/forum/index.php?showtopic=55274
Hi all,
I have the same problem. N560 is stick on the himalaya picture. I tried to falsh from WM5 to new rom for Wm6 and after installation the pda stuked. So I did a warm reset and now only the start picture is apperaing. Problem is that battery is down now.
Can someone give more info on the process followed to revive the PDA ? I just cannont read russian (may be Jinsu77 ?)
Many thanks for support in advance
same problem here please please please someone help us
the only thing i can do is the l c:\os_213u.nbf on mtty program and nothing else happend to the machine
sorry for my english
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
It was me asking on Newplow's guestbook.
In case you're using Vista, you need some trick to be able to rom update. Read below.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
And then you need to download MTTY (I used version 1.42, got it by googling) and follow below steps.
(used google translation from 4pda.ru)
------------------------------------------------------------
For rom update without ActiveSync.
1) take this set of extract, copy it to the folder with the firmware.
2) copy the file os_213u.nbf example in C: \
3) You press the button Recorder + food and poke in the hole reset (Recorder button and hold until you eat dolphins)
4) plug the device to a PC, the Task Manager, shooting process - wcescomm.exe
5) Run mtty, choose Port: USB, connect.
6) If mtty caused an error and shut down, simply restart mtty, if not typed commands, then repeat the procedure with paragraph 3.
7) in mtty command, enter: (first letter in kommande - a little l l от слова from the word L L oad)
> l l c:\os_213u.nbf c: \ os_213u.nbf
Since the end of the process will be an inscription about the error, remove the device from the PC.
9) Run rom update, zhmete "next", until you see dolphins.
10), plug the device to a PC and program.
---------------------------------------------------------------
Hope this helps you all
in advance sorry for my english
I am doing all the instructions carefully and the mtty show this
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,1A0F023Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
the pda shos the dolphins and the full blue bar
after without change anything i run the PocketLOOX5xxFlashTool that i have in the same folder with the :
EnterBootLoader.exe
OS_213U.nbf (originally rom)
RUUServer.dll
RUU.dll
and the only thing i can see is that the PocketLOOX5xxFlashTool is trying to find the pda without any luck
also the pda is stucked in the same screen with the dolphins and the blue bar
do you see any mistake in this procedure
Helppp!!! please
tuluba said:
Helppp!!! please
Click to expand...
Click to collapse
have you closed EVERY process of activesync before proceding with mtty?
I close the wcescomm.exe and the rapimgr.exe is there anything else?
The pocket LOOX 5xx FlashTool cant connect with the N560 and at the and says that Error"The language in this Flash Image update (ENGLISH) differs from that on your device()!" and i have always english rom exept maybe from the last rom "the killer" with the 128MB rom that i dont know if it is an english or something else because the device never opens to see
After flashing in MTTY(don't care about error messages), you need to unplug your n560 from PC. And then proceed romupdate until you see the dolphin picture. Now you plug n560 to PC and cilck next and wait for a while.. Hope it works!
I change the language of the rom and it works
thank very much all of you
At all they have Probs with flash from SD Card: only use a Card with 512MB! I think a Card greater then can't read by the Bootloader....
hey.
i am compeletly new here. I have the same with my n560. I tried to upgrade to 128mb but after restart I see only climbing. I tried everything here but on dolphins afterr line is blue it is finished. that I am unpluging device. starting looxflastool for 560 and first is trying to connect by active sync and that when no connection made I see dolphins on left screen of flash tool window. than I am pluging again and after couple secs I see that: Error"The language in this Flash Image update (ENGLISH) differs from that on your device. I tried to change rom on every language but not working as well. PLEASE HELP
if that helps than i will add than on top when delfins i see on 560 is two lines. first is typed 2.14.G4 on second directly below is 2.15.
and when mtty 1.42 finishing flashing i see following:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0224002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????
ChrisDo said:
Need help!!! Please!!!
I bricked my N560. I tried to downgrade from WM6 to WM5 and now I see only delfins and in the first line "2.14.G4" and in the second line "2.15"
What can I do?? How can I flash WM6 or WM5 ROM when there is no connection to the PDA????
Click to expand...
Click to collapse
You can usually get back to the boot loader if you do a hard reset. I am sure you know how, if not you will find it in the FSC CDROM manual that came with the device. Let us know if this works? I have got stuck at this point too, so I know it works..... hopefully!
As newbie on this, anyone please guide me step by step to upgrade my P3300 rom with nbh file. My device is unlock already with current ROM 5.2.1908 (build 18125.0.4.2).
The procedure is given in almost every thread. It's simple really. Is your SPL version anything other than 1.11.0000 or 1.11.cmon? If yes then your phone is not unlocked. Unlock your phone by running USPL from here or the updated USPL from here.
Check if the USPL has worked by checking your SPL number. During phone booting at the white HTC screen your SPL should show either 1.11.0000 ir 1.11.cmon.
If it does you are free to flash any ROM. Get the ROM of your choice, put your phone into bootloader mode by pressing the voice record, power key and reset button simultaenously for about 5 seconds till you see a three colored screen. Attach it with USB and flash the rom using RUU.
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
stacknickel said:
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
Click to expand...
Click to collapse
do u have only .nbh file or along with .nbh file any other files are there ?
generally along with the .nbh file there are other files like romupdateutuility.exe etc.,
download those files also and save those files into your PC.
after unlocking your device then staup the device with bootloader mode (three color screen)
connect the Device with the PC by USB cable.
in the device display u will a word USB (left bottom corner)
run the Romupdateutility from the PC...
the process will guide u next steps ...
after the completion u will have new OS
Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities.
Radio ROMs Link : http://wiki.xda-developers.com/index..._RadioUpgrades.
Note : before flashing any ROM or upgrading the RADIO kindly CID unlock your device or you will end up the with bricked device .
You can download my ROMs, they come with the full package
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
your device not properly CID unlocked...
unlock the device properly with USPL...
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
As sixthsigma said, did you check if the phone is correctly unlocked? Is the SPL showing 1.11.0000 or 1.11.cmon?
Secondly, what OS are you flashing on? XP, Vista or Windows 7?
Hi Randythered, IPL 1.25.0001 and SPL 1.27.0000
I am using your ROM RtR Manila v1.0
using XP
Well, firstly thank you for wanting to try out my ROM
Secondly, you haven't unlocked your phone properly yet. The SPL must be 1.11.0000 or1.11.cmon, depending on which USPL you use.
strange... hv tried several time but w/o luck...
now I notice that it cut out after '70' and jump into 100 with disconnecting
any choices of other USPL instead of the one attached here?
Did you flash the old USPL or the new one which is nosize? It is preferable to install the old one first. And then go for the cmon nosize USPL if need be.
From a noob to a noob
Hi, heres the procedure for upgrading your rom put as noob friendly as i can put it.
WHAT YOU NEED
1. HTC Artemis p3300
2. computer running Windows XP with activesync installed
3. Usb cable to connect to computer
4. The new rom that you want to flash
5. And USPL which can be downloaded at this page http://forum.xda-developers.com/showthread.php?t=311403
NB: For most of the newer roms you will probably need the updated nosize version of uspl http://forum.xda-developers.com/showthread.php?t=521406
PREPARATION
NB: Anything you need to backup or keep from your device do it now.
NB: in some cases you may have to hard reset your device before it will take the flash
1. Extract Uspl to your desktop
2. Extract the rom you downloaded to your desktop
3. Remove your sim chip and memory card from your device
4. Reset your device and sync with windows xp
UPDATING
1. In the USPL folder run the program called "start_uspl" and let it do its thing in the dos window,in
my case it goes to 70 and then jumps to 100,if you have been watching your device screen you will
see the linux penguin for a few seconds and it will change to a white screen.
A window will popup on your computer, do as it requests, when finished it will reset your device.
Sync your device with your computer again.
2. In your downloaded rom folder you should find a file called "ROMUpdateUtility.exe" or "Ruu.exe", run
it and a window will popup, do as it requests.
Your device screen will go tri-color(red,green,blue) and the rom update will begin, wait till it
finishes and thats it.
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
stacknickel said:
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
Click to expand...
Click to collapse
same ting got me with my first rom thats why i thought to put it in, happy flashing (not in the naked way )
Lol I can't belive I forgot to tell you that!
It's ok. Thanks to u too randythered.
Do you have dedicate Manila in cab file?
Thank you, here you go!
sixthsigma said:
your device not properly CID unlocked...
unlock the device properly with USPL...
Click to expand...
Click to collapse
Sixthsigma...you said - "unlock the device properly with USPL..." - how do I do that?
I got the same error as mentioned when trying to flash using the numb3rs ROM:
http://thewingster.com/numb3rs.aspx
I ran the herald-uspl.exe file. and ended up with teh above error. My TMo Wing has the original ROM on it and the phone itself is probably unlocked. Ive had it for a year now. Do I need to call TMo to unlock or is there some app I can run to do this myself?
appreciate any help!
nevermind, it worked ok on the second attempt!
hi i am a newbie, please bear with me as i dont know where to post this thread.
i recently loaded duttys bsb6.5 rom. i have following questions.
1) this rom has a different interface such as pics, music, text, email clock etc are written on home screen, its not manila. is it called titanium?
2) i loaded rom but after few hours, the system hangs and reinstalls the rom itself, i have tried the direct flashing from internal storage as well as from RUU inclued.
3) i read about mtty, but dont know how to use it, mtty opens up with a notepad like thing, i am completely lost
4) please suggest a best rom for diamond similar to dutty's with text interface, please suggest why my phone hangs after duttys and what shud i do to avoid it.
5) i like rom which is minimal, text interface, complete with softwares such as change screen, c home editor etc
i do not want the icons on the bottom ( softkeys written in clutter), i want just text,no bars etc
everything as this picture is fine but i dont want the lock , start, at the bottom, neither the softkeys in clutter, simple text softkeys are fine.
if anyone knows a light, titanium, like bsb6.5 duttys rom, please suggest or help me to resolve the hangs and freezes on bsb6.5
windows mobile revolution is slow, i dont want that.
pic link
http://forum.xda-developers.com/showthread.php?t=563245
sorry forgot to post the pic, i dont like this clutter at botton of windows revolution rom.
please help
i already have this rom
http://forum.xda-developers.com/showthread.php?t=506533
Hi, your problems you are having are simple. They are dealt with very easily! The MTTY basically formats your phone to get rid of any "left over bits" of the old rom. There is a thread where someone has explained in detail how to use it, if I were to explain here, I would simply be copying his thread so please read it! The thread is titled "the difinitive mtty thread".
Regarding the rom you have chosen, you are just not used to the new layout. I'm not a fan of titanium either. The original style interface is called manilla, which I prefer. People are trying to move away from it because it is RAM hungry. I recommend using energy rom. I recommend this because he has a manilla (or touch flo 3d) version, AND his rom is pre loaded with fun applications for you to try out! Here is the link: http://forum.xda-developers.com/showthread.php?t=517300
Good luck, dont panic! It's not as difficult as it seems!
cant get hard spl to work
i tried everything, jumpspl.
hardspl kaiser dont work on my rom
in the definite mtty thread they say download hardspl ver 7 which i cant find anywhere. plz help
To do an MTTY you dont need any SPL. You need hardSPL to flash a custom ROM... Have you done a HardSPL ?
To do an MTTY basically all you need to do is charge your phone, then bring it into bootloader (press reset button under the stylus and press volume down until the 3 colour screen is shown).
next step is to connect the phone to the pc with the usb cable. the phone should say USB instead of serial. if it doesnt then your pc doesnt have the correct drivers. (drivers found here http://forum.xda-developers.com/showthread.php?t=540290)
once your phone says USB, then load the exe file mtty1.42.exe (also found here http://forum.xda-developers.com/showthread.php?t=540290) and select USB in the drop down list and press ok.
a white text box will appear, type task 29 and press enter. once it's finished, use CustomRUU.exe to flash your new rom. job done.
Now, where are you getting stuck? I think the MTTY guide is pretty noob friendly! I've attached a custom RUU to save you looking...
Hey, I found this on the main page http://forum.xda-developers.com/showthread.php?t=416211
It's a complete upgrading guide. may be read that before doing anything to your diamond! You dont want to break it for good!
cant load the energy rom either
it is stuck on 0% and not loading
kmengi said:
it is stuck on 0% and not loading
Click to expand...
Click to collapse
Did you try the MTTY as dieselboy posted above?
errors i get
errors i got
kmengi said:
errors i got
Click to expand...
Click to collapse
Do you make use of MTTY ver 1.42? It seems the MTTY that you use is Test version.
For MTTY complete instruction go to:
http://forum.xda-developers.com/showthread.php?t=540290
I tried installing cooked ROM into my P3300 today
at first, i downloaded a new SPL which turned my version into 1.11.cmon
and then i downloaded Artemis Touch Vanilla 4.02
I followed the instructions in this thread
http://forum.xda-developers.com/showthread.php?t=299154
except it said nothing about where to put the extracted windows.nb so i just put it in the upgrade program's folder
the upgrade program ran as it did, and i got a success message
i made a hard reset to my P3300, and the normal splash screen showed up, but this time it said:
IPL 1.14.0001
SPL 1.11.cmon
GSM 02.67.90
OS 3.13.0.0
i think the OS version has changed, and either way, the text position did, previously it has been one line bellow the current layout
but either way, the phone can run like that for hours, it just wont move
is this what you call a bricked phone?
is there a way to solve it?
cheers
yair
anyone? please?
im killing myself here, i just got the phone(even if its old) and ive already ruined it
Hi
Do not worry. You will get it working again.
Google for Artemis factory rom and run it. It has the Rom + the radio rom too. Just run it.. But yes before that you need to run uspl.exe since its SPL 1.11.cmon.
Try searching and download it. If you cant find it I ll give you the link on monday..okay
You should run it from USB mode..
...
hey dude,
go here and look at post 5.
lots of tips n tricks here dude so bookmark it
Rn
earthwind3 said:
Hi
Do not worry. You will get it working again.
Google for Artemis factory rom and run it. It has the Rom + the radio rom too. Just run it.. But yes before that you need to run uspl.exe since its SPL 1.11.cmon.
Try searching and download it. If you cant find it I ll give you the link on monday..okay
You should run it from USB mode..
Click to expand...
Click to collapse
i had WM5.1, does this matter? because the factory rom i found is WM6
i found it here: http://forum.xda-developers.com/showthread.php?t=416979
raving_nanza said:
hey dude,
go here and look at post 5.
lots of tips n tricks here dude so bookmark it
Rn
Click to expand...
Click to collapse
this didnt help, it just tells me to download the rom:
a.my rom isnt in there, there is no specification for IPL 1.14.0001, the closest one is 1.14.0000 and its in spanish, so its definately isnt mine, what do i do?
b.i have no idea how to install it, or what to do with the SPL
and besides, i cant even connect with my device, so how am i supposed to run it with USB? i dont get active-sync, and the "apparel mobile" folder is empty, meaning no connection, so im really dumbed here...i have no idea what to do...
yair1221 said:
what to do with the SPL
Click to expand...
Click to collapse
you should be able to flash any rom to your device regardless of spl = uspl 1.11.cmon.
*try flashing a differant rom, eg Andrew82 rom (also download the custom ruu for it too.. instead of original rom, try a differant custom rom)
yair1221 said:
i cant even connect with my device, so how am i supposed to run it with USB?
Click to expand...
Click to collapse
put your device into bootloader dude. post 3
now connect to pc - device should now say usb.
run and click through the options for the custom ruu, ruu should be in a folder with anderw82 .nbh rom file.
Rn
raving_nanza said:
you should be able to flash any rom to your device regardless of spl = uspl 1.11.cmon.
*try flashing a differant rom, eg Andrew82 rom (also download the custom ruu for it too.. instead of original rom, try a differant custom rom)
put your device into bootloader dude. post 3
now connect to pc - device should now say usb.
run and click through the options for the custom ruu, ruu should be in a folder with anderw82 .nbh rom file.
Rn
Click to expand...
Click to collapse
i held the voice button, and pressed the the reset button, all it did was...to make a restart, and im stuck again at the HTC logo, saying:
IPL 1.14.0001
SPL 1.11.cmon
GSM 02.67.90
OS 3.13.0.0
i tried connecting it to the USB now, it didnt do anything, the computer didnt even recognize a connection was inserted, first i need to find a way to connect it, later ill worry about the ROM
I've got the very same problem. I have tried to flash official HTC unbranded ROM to my Artemis and now I'm stuck at boot screen. My computer won't recognize that I have connected Artemis. It recognizes it only in bootloader mode but when I try to flash any ROM (no matter if it is official, modified or custom) or even radio, the flashing program gives me error at 3%.
well, you got me there, im stuck just as you are
i cant even connect my device using USB only, the computer wont recognize it, anyone?
...
when the device is in bootloader and connected to pc, it is connected = not by active sync/wmdc but device is connected (bootloader should show "usb").
you will be able to flash a rom.
some artemis devices are put into bootloader by diffearnt combinations of buttons pressed/held.
so if a single press of the soft reset button and holding the voice button does not work.
try:
holding the voice button + holding the volume down button and then single press the soft reset button.
*whats the error number on 3%?
raving_nanza said:
you will be able to flash a rom.
Click to expand...
Click to collapse
im not able to see my device connected, therefore i assume i cant
try:
holding the voice button + holding the volume down button and then single press the soft reset button.
Click to expand...
Click to collapse
well, thats a bit hard, ill edit when i manage to do that
EDIT: didnt work, i dont think my phone HAS a bootloader option
how should a bootloader look? is it just the normal startup flash screen?
BTW, i can only run the RomUpdateUtility.exe, and not uspl_start, is this normal? because the RUU isn't doing anything, actually...no ROM has changed on my device, and it is still bricked, i think it is cid locked
...
bootloader should look something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you will definatly have a bootloader option
sometimes a device wont go into bootloader mode, if your device wont go into bootloader then the way around it is to download MTTY and use that, this has the ability to put your device into bootloader.
USPL 1.11.CMON ROM UPGRADE TIPS&TRICKS - post 4
IF YOUR DEVICE WONT GO INTO BOOTLOADER, USE MTTY.
download MTTY
1) set MTTY open port settings..
2) command MTTY to reset your device into BOOTLOADER.
Cmd>password BsaD5SeoA
Cmd>ruurun 0
Cmd>ResetDevice
DO NOT COPY AND PASTE, YOU MUST TYPE MANUALY.
*your device will now reset and be in bootloader mode.
Rn
in the options form:
the only thing i had to change was the RTS/CTS and USB
so i set the RTS/CTS
but the USB wasn't on that list
so i tried writing it down instead of selecting it
and i got this error:
USB port can not open
...
never mind about mtty, i think the port setting for usb must be set on device too. (which your currently unable to do)
i made a mistake in one of my previous posts, the info was not correct:
raving_nanza said:
try:
holding the voice button + holding the volume down button and then single press the soft reset button.
Click to expand...
Click to collapse
*ive not used this device for a while now so my info is a bit rusty.
"press and hold the top two side buttons on device = the voice button and the button on the oposite side of the device, (i think its the backlight button)... and now press the soft reset button but keep other buttons held, the device should now go into bootloader"??
Rn
ALLLLLRIGHTY THEN!
finally, the device is at bootloader and connected as USB
now, i need a step by step tutorial, because i dont want to repeat my mistakes, how do i flash a rom?
and can i use a 6.1 factory rom even though my factory rom should be 5?
i want a 6.1 rom, i currently have Artemis Touch Vanilla 4.02 which is the one i want to install(only if i can, if i cant, ill go back to a factory rom)
so...how do i do it?
...
yair1221 said:
ALLLLLRIGHTY THEN!
finally, the device is at bootloader and connected as USB
now, i need a step by step tutorial, because i dont want to repeat my mistakes, how do i flash a rom?
and can i use a 6.1 factory rom even though my factory rom should be 5?
i want a 6.1 rom, i currently have Artemis Touch Vanilla 4.02 which is the one i want to install(only if i can, if i cant, ill go back to a factory rom)
so...how do i do it?
Click to expand...
Click to collapse
woop! lol
your spl is 1.11.cmon i would say you can flash any rom for artemis.
tbh the factory rom should only be used as a fail safe when no rom will flash, basicly so people can redo uspl and flash a custom rom.
personally, i would only use 6.1 roms as 6.5 tend to be slow, also considering that you have an old device and that 6.1 runs alot faster and smoother. (glad your choice is for 6.1)
whenever anyone asks for a rom suggestion for this device i always suggest:
ANDREW82 6.1 ROM
youl need to download the cam fix.cab
download Andrew82 rom.
i tried many roms for the artemis and this is the rom i found 1, the fastest and 2, most reliable.
*if you download a rom and there is only one file (.NBH) in the download then download this CUSTOM RUU..
download
(FACT: Andrew82 rom will just be the .NBH rom file so you will need this ruu!)
charge your device to 50+%
(the RUU wont work unless the battery is above 50%)
now put your device into bootloader.
connect device to your pc via usb.
open the RUU (rom update utility) and click through the options.
(the options are just to say there is a risk of breaking your device and bla bla bla)
your device would now display a gray/blue screen with a loading bar.
when the RUU is finished, you should have a success screen displayed on the RUU.
(your device should now restart and load windows mobile.)
if you get an error on the RUU, post the error number here and ill tell you why you got that error.
(usually if the update stops at 3% its because you need uspl)
there is lots of programs for artemis.
ive uploaded some programs for other users so its definatly worth a look here.
Rn
HAAAAAAAAAHAAA!
it worked!
oh, you're brilliant
altough the loading time is quite big, ill manage with it, BTW: do i still have my solitare and bubble breaker inside? because i cant install games on my phone, i mean, i can install them, but they wont run
...
lol cheers dude
erm, i think the games (solitaire/bubblebreaker) should be in the start menu/programs/games folder.
but if they are not there then Andrew82 has not included them into his rom.
its wierd that your other games dont run, does it give an error?
*if i was you i would hard reset your device then try again.
1) Press and hold both soft keys
2) press the stylus/reset button to reset the device.
3) Press Green call button to restore manufacturer default, or press any other key to cancel.
if hard reset does not change anything: reinstall .net framework 3.5.
for java based games: download jblendjava.
Rn
well, either the rom or jblend did it, now the games wont close, however, i cant enter them again, i can only play once after install, how do i find all the games? i tried the file explorer, inside the midlet folder there were setups for the games, but not the games themselves, so, what did i do wrong this time?
yair1221 said:
well, either the rom or jblend did it, now the games wont close, however, i cant enter them again, i can only play once after install, how do i find all the games? i tried the file explorer, inside the midlet folder there were setups for the games, but not the games themselves, so, what did i do wrong this time?
Click to expand...
Click to collapse
it was probably jblendjava that fixed it, so i guess your using java games.
go to taskmanager and Terminate the prosess you want to close.
i dont actually use or play java games, infact i dont play any games on my device, however the few games i did play on my artemis are attatched below.
i do know about the minamise issue though, that happens a lot with java games so i suggest not using java games.lol
go to your games folder in the start menu, all the game links should be installed to that location, sometimes they install to the programs folder..
or run jblendjava and the games might be selectable from a list. (im not sure)
you could even search the program files folder for the .exe of the game.
MINESWEEPER
TOUCH THE MUSIC
UNJUMBLE
SHOOT EM UP
DOPE WARZ
AIRBALL
you can get more freeware games and apps from here, this is where i go to get some cool apps and games.
XDA DEVELOPERS is the only website you will need for freeware! tbh its like gold
i can recomend some 'good' free apps if you want?
Rn
/DFT HSPL WP7S\
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HSPL
for HTC second generation devices
with Windows Phone 7
for HTC Titan/Omegia
After a hard and long work during few months, our team proudly presents our release.
We tried to make it simple as usual, but it's not really easy task.
So the current HSPL installation requires rather big amount of actions with device.
This release consists from HSPL wizard and a special set of files.
Do not update your device to 4.XX ROMs via RUU or Zune!
It's not known if possible to revert that SPL versions back.
Supported WP7S devices
*Omega (HTC Radar C110e)
*Titan (HTC Eternity X310e)
HTC Radiant (Titan II) IS NOT SUPPORTED!
Both Omegas are supported regardless of body color
Most of these devices have several MIDs (ModelID, looks like “PI391100”).
The current release supports only some limited numbers of MIDs. This was designed to minimize a possible harm to user’s devices.
List of supported MIDs:
Titan: "PI39****", “PI391100", "PI391000"
Omega: "PI06****”, “PI061100, “PI061000"
!Please note that on SPL screen MID is only 7 symbols, without last one.!
Programs stops any operations if unknown MID detected. If your device have unknown MID, please report about it in this thread.
Specify your MID, device name, ROM versions. It’s nice, if you can give a link to download ROM.
Basic stuff to know
SPL is Secondary Program Loader. It allows to flash ROMs to device.
Without working SPL device is fully bricked, you can’t restore it. It’s why all operations with SPL are dangerous.
OSPL is Original SPL. This SPL comes with stock ROM and doesn’t allow to flash custom stuffs.
HSPL is Hard SPL. It’s permanently flashed to internal device memory and replaces OSPL. After soft reset you still have HSPL instead of OSPL.
Installation
for Titan:
0. Try to install right SPL with RUU.
If it your device has different CID it will fail with Country ID error.
If it fails continue with GoldCard.
1. You need USB Y-cable and GoldCard.
There are several instructions already on the XDA how to use Y-cable and use GoldCard.
Instructions for HTC WP7F can be used without problems.
2. You need to copy file from archive to your SD card ETERIMG.nbh
3. Reset your device with holding Volume Down + Camera buttons to enter USB Host mode inside SPL.
4. It should be flashed to device.
5. After reboot enter SPL by holding VolumeDown and VolumeUp keys. It should show "2.05 MFG"
6. Connect your device to PC and run HSPL Wizard to install.
7. Select "2.05 - HSPL" to install HSPL.
8. After reboot may enter USB Host mode again: try to hold VolumeUp+VolumeDown keys to prevent it.
9. After reboot check that HSPL is installed. You should see "HSPL" and "CotullaH"
for Omega:
0. Try to install right SPL with RUU.
If it your device has different CID it will fail with Country ID error.
If it fails continue with GoldCard.
1. Update your Omega via Zune as high as possible. You must apply HTC OEM update.
Some RADIO versions are not able to flash another version from SPL.
2. You need USB Y-cable and GoldCard.
There are several instructions already on the XDA how to use Y-cable and use GoldCard.
Instructions for HTC WP7F can be used without problems.
3. You need to copy file from archive to your SD card OMEGIMG.nbh
4. Reset your device with holding Volume Down + Camera buttons to enter USB Host mode inside SPL.
5. It should be flashed to device.
6. After reboot enter SPL by holding VolumeDown and VolumeUp keys. It should show "2.05 MFG"
7. Connect your device to PC and run HSPL Wizard to install.
8. Select "2.05 - HSPL" to install HSPL.
9. After reboot may enter USB Host mode again: try to hold VolumeUp+VolumeDown keys to prevent it. Or open and close cover.
10. After reboot check that HSPL is installed. You should see "HSPL" and "CotullaH"
If you got problems during flashing Omega with GoldCard on RADIO item, you should run MTTY and run "set 14 0" command.
Then you will able to boot into WP7 and update via Zune OEM. Then you can try to install HSPL again.
Deinstallation
1. Flash stock ROM via RUU.
-=OR=-
Run HSPL wizard and choose "2.05 - OSPL" to restore stock SPL.
2. Do not forget to make poker face in repair center!
Important Notes
-2: New ROMs come with 1750 version must have same radio (with 1750 also). You need to have same OEM and RADIO version, otherwise ROM won't boot.
-1: It seems that it's a bug inside SPL: you can connect device in SPL mode to PC via USB only ONCE.
You need reset device to connect it again.
0. You will lost all data during HSPL installation. Make a backup before.
1. Before doing any operations be sure you have battery level more than 50%!
2. Battery is NOT charged in SPL mode with USB connected!
Sometimes in SPL mode WP7F devices DO NOT charge. You may got a dusty brick if it was powered down during SPL or RADIO update!
3. Stock RUU ROMs have two NBH files inside, SPL_Signed and RUU_Signed.
So it's not possible directly flash stock ROM, you need to remove SPL from NBH.
4. Rememeber if you have HSPL and you flashing stock RUU_Signed.nbh you lost HSPL!
5. Supported OS: Windows XP, Windows Vista, Windows 7. Is not tested on Windows 8.
Warranty Issues
Be warned, using this release may void your warranty.
If you need to send your device to a Repair Centre, make sure that it looks like stock! Install stock official ROM before go to Repair Centre.
Disclaimer
This product is free to use at your own risk. We take NO responsibility for any
conflict, fault, or damage caused by this procedure. No warranties implied or
otherwise, are given if you agree to use this product. No problems were found while
testing this product on several different devices, your experience may vary.
Links
Download
The first custom ROM for HTC Omega
The first custom ROM for HTC Titan
Special thanks
HD2Owner, for his great graphic work!
Official DFT site (Chinese)
Best regards, DFT, 01.06.2012
Installation for OMEGA
1. Try to flash via RUU: Go to 1_SPL205\OMEGA folder and run ROMUpdateUtility.exe
2. If flash fails with error "Country ID error" you should use gold card to flash.
3. Create gold card and prepare flashing.
You can use this Instruction for example.
4. Copy 1_SPL205\OMEGA\OMEGIMG.nbh to your SD card.
5. Hold VolumeDown + Camera keys to enter USB Host mode.
6. Flash
7. If flash fails with RADIO error you need to update device via Zune.
Use "set 14 0" command via MTTY to disable auto boot to SPL.
Read more about MTTY here. After update do again from step 5.
8. After reboot you need to check 2.05 MFG should appear in SPL screen.
9. Run HSPL wizard to install HSPL. Choose "2.05 - HSPL"
10. Done
Installation for TITAN
1. Try to flash via RUU: Go to 1_SPL205\TITAN folder and run ROMUpdateUtility.exe
2. If flash fails with error "Country ID error" you should use gold card to flash.
3. Create gold card and prepare flashing.
You can use this Instruction for example.
4. Copy 1_SPL205\TITAN\ETERIMG.nbh to your SD card.
5. Hold VolumeDown + Camera keys to enter USB Host mode.
6. Flash
7. After reboot you need to check 2.05 MFG should appear in SPL screen.
8. Run HSPL wizard to install HSPL. Choose "2.05 - HSPL"
10. Done
reseved3
reserved 4
firstttttttttttttttt
update downloading
nice work DFT, Cotulla & mwang!
edit.
download doesn't work. : /
works now.
RAR file somehow corrupted after upload. . . fixing it now . . . sorry
Cotulla said:
RAR file somehow corrupted after upload. . . fixing it now . . . sorry
Click to expand...
Click to collapse
was just about to mention it. thanks for the catch.
finally , we did it again
guys this is amazing
i will donate this weel
20$ for sure thanks cotulla thanks dft
---------- Post added at 08:40 PM ---------- Previous post was at 08:31 PM ----------
ok guys for all the htc titan from att invalid vendor id
you need a goldcard and a Y-cable
to get this done
well i will have to wait
well done, it rocks!
You've done it again!! Big thank you Cotulla & DFT, you guys are amazing!
Error[294]:invalid vender id
Gotta buy a y-cable~~~
Nicely done! Thanks for your hard work!
THANKS!!!
I already ordered my Y-Cable on eBay.
Thank you very much big business super news
[Error Description]:
command #2 failed
[Info]: USBWorkHSPL.cpp (307)
Hi Cotulla,
Thank you so much for the long awaited solution for our HTCs 2nd
Please bear in mind there is a bounty of more than 800$ in a thread in the Titan section for the 1st custom rom for the Titan. You well deserve it!
well done thanks so much
Titan Freezes after entering USB mode..
Hello,
after putting my titan in an activesync mode and "serial" changes to "USB" the RUU on my computer switches to the 0% but my phone stays at the bootloader with "USB"? what should I do?
Thank you