Develop Bugs

TOUCHFLO threshold

~Nice simple question...
Using Advanced Configuration (in Meschles 4.01 TOUCH full with cube)- what sort or threshold setting should I be looking at to make it MORE sensitive.
Have a screen protector on, and it all (scrolling and cube activation) seems a bit hit and miss. Thought a little more sensitivity may help (my wife would probably agree!!!!
Do I go up from 11000 or down??
What settings are you guys out there using???
Thanks

I jacked mine up to 40866 to make it more sensitive

[Q] AOKP Screen Brightness

The lowest brightness setting is not dim enough for me in low light conditions so I've been looking to alter it.
After reading around the capabilities of some apps it seems that they only add an overlay which reduces contrast. I would much prefer to do it natively.
I then realised that the AOKP ROM has this functionality!
However, I can't seem to get it to work.
Settings>Display>Custom backlight settings
Changing the screen dim level doesn't seem to change anything for me.
Can anyone offer some tips or advice?
Thanks

Works fine for me. I know it doesn't help your problem any...

danger-rat said:
Works fine for me. I know it doesn't help your problem any...
Click to expand...
Click to collapse
Does your display dim more when you select a lower than default value or did you have to change something else?

Did you change the corresponding value in "Edit Other Levels" as well (if you're on auto brightness)? Not on AOKP, but mine is fully functional both on manual, and auto.
Their implementation is the same as CM9 (which is nearly identical, if not the same as the CM7 implementation).
Edit: just a thought, not sure if the AOKP status bar brightness slider is hardcoded to a certain minimum level? Are the results the same if you adjust your brightness via the Settings>Display>Brightness slider?

Settings>Rom Control>Performance>color multipliers.
Drag the three bars all the way down.
As far as your problem...
Are you on auto brightness?
And have you adjusted the "Dim Level" prior to adjusting the screen levels?
(Dim Level is the level your screen dims to after not touching it for 15 seconds or whatever).

Jubakuba said:
And have you adjusted the "Dim Level" prior to adjusting the screen levels?
(Dim Level is the level your screen dims to after not touching it for 15 seconds or whatever).
Click to expand...
Click to collapse
Screen dim level is the minimum brightness value attainable (I lower mine to 12 so I can enter a screen value of 12 in my custom levels), but also does correspond to what you mentioned.

Another AOKP user expressed similar concerns but found an app called Root Dim or something that solved his problem.

OpusX11 said:
Another AOKP user expressed similar concerns but found an app called Root Dim or something that solved his problem.
Click to expand...
Click to collapse
The implementation must be still broken then; haven't tested the latest AOKP releases. Root dim apps tend to create lag.

Implementation works perfectly here.

Jubakuba said:
Implementation works perfectly here.
Click to expand...
Click to collapse
Same.

Jubakuba said:
Implementation works perfectly here.
Click to expand...
Click to collapse
Attaining an altered screen dim level when on auto as well?
Edit: comment wasn't an indictment; just remembering issues that were there on b35 or b36 (?).
Sent from my Galaxy Nexus

Yep.

Microwave. said:
Does your display dim more when you select a lower than default value or did you have to change something else?
Click to expand...
Click to collapse
I select a lower than normal default brightness, and it appears to just work. The auto brightness decreases, which is what i was looking for at night, and also the overall min brightness decreases. The max brightness seems unaffected...

remember when making these changes you do have to save and apply. many people forget that step.

tspderek said:
remember when making these changes you do have to save and apply. many people forget that step.
Click to expand...
Click to collapse
That's an especially annoying mis-step after entering 23 custom levels.

CMNein said:
That's an especially annoying mis-step after entering 23 custom levels.
Click to expand...
Click to collapse
Lol.
And no offense taken at all, man.
And me personally, I just use 5 levels.
One that goes all the way to 600[whateverambientlightismeasuredby] and a screen level of 5.
This keeps my phone from dicking about with it's brightness when I'm indoors...and I have no problem reading it. I don't mind a super-dim screen in general.
The remaining levels I ramp up fairly aggressively for two "by a window" scenarios...
And outside.
And OMGSUNNY outside.

Jubakuba said:
Lol.
And no offense taken at all, man.
And me personally, I just use 5 levels.
One that goes all the way to 600[whateverambientlightismeasuredby] and a screen level of 5.
This keeps my phone from dicking about with it's brightness when I'm indoors...and I have no problem reading it. I don't mind a super-dim screen in general.
The remaining levels I ramp up fairly aggressively for two "by a window" scenarios...
And outside.
And OMGSUNNY outside.
Click to expand...
Click to collapse
I add 2 levels for the high end, and reduce the other brightness levels considerably. Ultimately I usually end up with the perfect'ish level for most scenarios. I hate having to adjust brightness the old fashioned way
Sent from my Galaxy Nexus

CMNein said:
Screen dim level is the minimum brightness value attainable (I lower mine to 12 so I can enter a screen value of 12 in my custom levels), but also does correspond to what you mentioned.
Click to expand...
Click to collapse
Which values do you change in the custom levels?
OpusX11 said:
Another AOKP user expressed similar concerns but found an app called Root Dim or something that solved his problem.
Click to expand...
Click to collapse
Yeah, I know an app could potentially solve the problem but I don't like using 3rd party apps when the solution can be more elegantly achieved using native tweaks.
Jubakuba said:
Lol.
And no offense taken at all, man.
And me personally, I just use 5 levels.
One that goes all the way to 600[whateverambientlightismeasuredby] and a screen level of 5.
This keeps my phone from dicking about with it's brightness when I'm indoors...and I have no problem reading it. I don't mind a super-dim screen in general.
The remaining levels I ramp up fairly aggressively for two "by a window" scenarios...
And outside.
And OMGSUNNY outside.
Click to expand...
Click to collapse
Could you send me a screenshot of your custom levels, that sounds like the exact thing I'm after - a dimmer screen in general, and having a lower min brightness.
So am I correct in thinking that you need to lower the dim value in order to set lower values in the custom levels?

[Q] Z1compact: getting minimum brightness LOWER

Hello Everyone,
I have a problem with my amami and I doubt I am the only one but for some reason people do hardly complain: the brightness even at lowest possible setting is still too bright.
I had this back when I had original FW and I am having the same issue with CM11 (latest nightlies). Using manual control or auto-brightness doesn't make much difference, i.e. in a totally dark room the ambient light sensor reports 0Lux and the screen is still too bright.
I found a workaround already (the ScreenFilter app that people recommend all over the internet) but it sucks because it heavily reduces the picture quality, i.e. visibly reduces contrast and especially the gray color resolution. And it also doesn't reduce power consumption like real brightness value change would do.
I looked around for possible solutions and there is a trick with writting a new value of current limit to Linux settings (some mA value between 0 and 20 to some max_current file in procfs). And this really helps but also impacts the maximum brightness, the screen is hardly ready in sun light with reduced current.
Is there a silver bullet? I am thinking about writing an app for that but it would require SU permissions and is kinda dirty to implement. Can anyone recommend a better solution?

have you tried the xposed Modul "minimum brightness" ?

Install Lux Brightness. from play store.
You can overboost it or make the screen so dark that you can't even see it.
Another great screen mod is Twilight which basically dims the screen red based on clock so it helps fall sleep faster when using phone before bed.

New Folder said:
Install Lux Brightness. from play store.
Click to expand...
Click to collapse
Yes, another vote for Lux. It lets you set brightness to negative levels, mine is usually around -50%. https://play.google.com/store/apps/details?id=com.vito.lux&hl=en

Vote for Lux here too.
Nothing comes close

camaro322hp said:
Yes, another vote for Lux. It lets you set brightness to negative levels, mine is usually around -50%. https://play.google.com/store/apps/details?id=com.vito.lux&hl=en
Click to expand...
Click to collapse
Thanks for the hint. I tried the Lite version and AFAICS it simply uses the same trick as ScreenFilter and other "sub-zero" regulators, putting an alpha overlay on top of the image stack.
You can identify this kludge easily by looking at the button areas, they don't get darker anymore. And you can see the black level not getting real black, i.e. the power consumption is not reduced.
However, Lux seems to be one of the better toys because of the plugin interface. Unfortunately there is no HW plugin for Sony devices but judging by the quick look at the Nexus-4 plugin (it's open source!!) it should be possible to adopt this method to Z1 as well. So, maybe when someone could eventually implement that.

xposed Modul "minimum brightness" works, i tested it for you. you can make the screen dim to complete black with your normal display brightness slider without grey or black overlay. it just sets down the minimum brightness level to 1 or 0 (default is 10 or 20), so it should also work with enabled auto brightness

chertVdetali said:
I looked around for possible solutions and there is a trick with writting a new value of current limit to Linux settings (some mA value between 0 and 20 to some max_current file in procfs). And this really helps but also impacts the maximum brightness, the screen is hardly ready in sun light with reduced current.
Click to expand...
Click to collapse
As far as i remember, /proc is only used to call upon information, not to set specific values. What you are looking for is placed within /sys.
To be precise in /sys/devices/leds-qpnp-ee125e00/leds/wled:backlight/. There you will find a file called max_current with which you can easily control the brightness and set it to a very low level. Note that this actually dims the screen and not just applies a filter like most apps do...
One drawback is that the value will change again after you restarted the device. I set up a little flow with Automate β that takes care of this for me. I find this solution a lot better than all the screen filter apps.
This is true for CyanogenMod 11 and GreatDevs Kernel. It might be different on Stock. I know that the path for my Nexus 7 is sys/class/leds/lcd-backlight.
I hope this helps you a little bit.

rob rich said:
xposed Modul "minimum brightness" works, i tested it for you. you can make the screen dim to complete black with your normal display brightness slider without grey or black overlay. it just sets down the minimum brightness level to 1 or 0 (default is 10 or 20), so it should also work with enabled auto brightness
Click to expand...
Click to collapse
I am wondering how you can claim that the result is complete black. Calling this black is like saying "TN monitors have good black values" (I know such people, they change their mind quickly when they see my Eizo with a VA panel at night).
No, seriously, the default was already 10 (see config.xml in cm11 repo) and the difference between 1 and 10 is hardly visible. It's still way too bright for work without eye strain in the darkness.
@Wooaarr: thanks, this is apparently the way to go, I just need to find time to configure it. And yes, of course, the file is in sysfs and not procfs (automated typing, when I grew up with Linux there was no sysfs out there ).

chertVdetali said:
I am wondering how you can claim that the result is complete black. Calling this black is like saying "TN monitors have good black values" (I know such people, they change their mind quickly when they see my Eizo with a VA panel at night).
No, seriously, the default was already 10 (see config.xml in cm11 repo) and the difference between 1 and 10 is hardly visible. It's still way too bright for work without eye strain in the darkness.
@Wooaarr: thanks, this is apparently the way to go, I just need to find time to configure it. And yes, of course, the file is in sysfs and not procfs (automated typing, when I grew up with Linux there was no sysfs out there ).
Click to expand...
Click to collapse
when i disable autobrightness and push the slider to the left my screen goes completely off, so you wanna say that screen off isnt black? funny

chertVdetali said:
Thanks for the hint. I tried the Lite version and AFAICS it simply uses the same trick as ScreenFilter and other "sub-zero" regulators, putting an alpha overlay on top of the image stack.
You can identify this kludge easily by looking at the button areas, they don't get darker anymore. And you can see the black level not getting real black, i.e. the power consumption is not reduced.
However, Lux seems to be one of the better toys because of the plugin interface. Unfortunately there is no HW plugin for Sony devices but judging by the quick look at the Nexus-4 plugin (it's open source!!) it should be possible to adopt this method to Z1 as well. So, maybe when someone could eventually implement that.
Click to expand...
Click to collapse
Interesting information, I did not know that. You are correct, the navigation buttons are brighter than the rest of the screen at negative values. I had noticed that before but didn't know why. Works well enough for me though.

rob rich said:
when i disable autobrightness and push the slider to the left my screen goes completely off, so you wanna say that screen off isnt black? funny
Click to expand...
Click to collapse
Well, you claim that it works for me because you tested it on your device. So... yeah, why not, I could say what you mentioned above just following the same logics. :silly:

Capacitive button brightness?

Is there a way to customize the capacitive button’s brightness?(maybe by editing XML or all file?) I found an app in play store that can set brightness to maximum but there's still some minor bug. Plus I'd prefer to modify the system file on my own than having an app running background the whole time.
Any help would be appreciated.

BrianKuo1853 said:
Is there a way to customize the capacitive button’s brightness?(maybe by editing XML or all file?) I found an app in play store that can set brightness to maximum but there's still some minor bug. Plus I'd prefer to modify the system file on my own than having an app running background the whole time.
Any help would be appreciated.
Click to expand...
Click to collapse
the brightness is controlled by the light sensor..the darker it is the lower the brighter the higher the brightness of the capactive buttonbrightness.
back on the m7 there was a seperate array in framework-res.apk that you could easily configure.
Now it's working a bit different. only way to modify is add some custom code in AutomaticBrightnessController (services.jar).
..or flash our rom, we have it configurable:

j to the 4n said:
the brightness is controlled by the light sensor..the darker it is the lower the brighter the higher the brightness of the capactive buttonbrightness.
back on the m7 there was a seperate array in framework-res.apk that you could easily configure.
Now it's working a bit different. only way to modify is add some custom code in AutomaticBrightnessController (services.jar).
..or flash our rom, we have it configurable:
Click to expand...
Click to collapse
ayyy
I worked around a little bit, found the file at /sys/class/led/button-backlight
Hope this helps anyway.

BrianKuo1853 said:
ayyy
I worked around a little bit, found the file at /sys/class/led/button-backlight
Hope this helps anyway.
Click to expand...
Click to collapse
Could have tell you that...but as said once the lightsensor value changes the file will change.
you could change it to your desired value..then chmod it to read only...but I doubt you will find a satisfying value that fits in the dark and bright

Themes / Apps / Mods Display density mod

For the sake of fun I enabled USB debugging and used adb to change the density of the display window from 420 to 320. Looks great on the large display and the amount of info you see compared to the default value might be interesting to some of you.
> adb shell wm density 320
> adb shell wm density reset ( to restore original value)
I used this trick in the past on many of my devices and it's now a habit.
Let me know if it works well for you..

Why not just change minimum width in developer options?
I use a dpi value of 1200...

Techvir said:
Why not just change minimum width in developer options?
I use a dpi value of 1200...
Click to expand...
Click to collapse
I don't like to keep dev. options "On" for many reasons.

Just for my knowledge, I any difference between the two?

Yeah Dev Options FTW, why dont you like to keep it on?

Techvir said:
Why not just change minimum width in developer options?
I use a dpi value of 1200...
Click to expand...
Click to collapse
thanks i put mine to 800 absolute life safer since alot was simply too big.
Do you know how to change the Preview Picture size ? Like in Whatsapp, instagram / fb they are soooo huuge.

In dpi, bigger the no., smaller the things on screen. So you ha e more stuff to see..
Mine is 1200 so everything is Tiny. I actually have to increase the font size to read everything

Xeon said:
For the sake of fun I enabled USB debugging and used adb to change the density of the display window from 420 to 320. Looks great on the large display and the amount of info you see compared to the default value might be interesting to some of you.
> adb shell wm density 320
> adb shell wm density reset ( to restore original value)
I used this trick in the past on many of my devices and it's now a habit.
Let me know if it works well for you..
Click to expand...
Click to collapse
does it have any impact on the battery ???

Techvir said:
In dpi, bigger the no., smaller the things on screen. So you ha e more stuff to see..
Mine is 1200 so everything is Tiny. I actually have to increase the font size to read everything
Click to expand...
Click to collapse
I tried 1200 DPI in developer settings which was fine for everything except the lock screen when I unfolded the phone while locked. It cut off the numbers on the left and right side of the keypad for entering my pin to unlock it. I use fingerprint recognition 99.9% of the time.

truckerdewd said:
I tried 1200 DPI in developer settings which was fine for everything except the lock screen when I unfolded the phone while locked. It cut off the numbers on the left and right side of the keypad for entering my pin to unlock it. I use fingerprint recognition 99.9% of the time.
Click to expand...
Click to collapse
Yes. That is the only issue I have seen so far. I mostly use face unlock or finger as well.

I would like to just increase the font size on the front screen I've already adjusted the minimum width settings from the insider screen but the outside screen fonts are still to small . I've noticed that when you go in the minimum width settings from the front screen the numbers are different then when u go in from the inside screen and if you try and adjust them from the front outer screen they won't stick they just default to there original numbers ?

My sweet spot is 744dp and Font size in the middle.

Zerobim08 said:
My sweet spot is 744dp and Font size in the middle.
Click to expand...
Click to collapse
I don't have much experience playing with them but they seem to be dynamic changing with other settings first of all the numbers are different when you go in from the inner screen and from the outer front screen
I'd just like to be able to bump up the size on the front screen already got the inside where i like it

Markeee said:
I don't have much experience playing with them but they seem to be dynamic changing with other settings first of all the numbers are different when you go in from the inner screen and from the outer front screen
I'd just like to be able to bump up the size on the front screen already got the inside where i like it
Click to expand...
Click to collapse
On the cover display. Go to developer options, change dp. This will be the dp for cover screen

Just changed my minimum width to 740, awesome.
+1 to changing the image preview size.

Zerobim08 said:
On the cover display. Go to developer options, change dp. This will be the dp for cover screen
Click to expand...
Click to collapse
Are you saying change the minimum width DP from the front screen?
Coz i don't see any change dp setting option under developer options
Also changing minimum width numbers from the front screen won't stick they just default back to original number for me

Markeee said:
Are you saying change the minimum width DP from the front screen?
Coz i don't see any change dp setting option under developer options
Also changing minimum width numbers from the front screen won't stick they just default back to original number for me
Click to expand...
Click to collapse
I meant the minimum width. Like you said this can't be changed for outer screen.
Maybe you can adjust the font size to fit outer screen, then change the minimum width on inner screen until the font size is comfortable.

Zerobim08 said:
I meant the minimum width. Like you said this can't be changed for outer screen.
Maybe you can adjust the font size to fit outer screen, then change the minimum width on inner screen until the font size is comfortable.
Click to expand...
Click to collapse
Even maximum font and display size settings don't make the outer front screen big enough for me still way small

Markeee said:
Even maximum font and display size settings don't make the outer front screen big enough for me still way small
Click to expand...
Click to collapse
Which apps the text too small? I put in middle and text size for most apps are ok for outer screen.
If it is browser you can adjust the browser text size independently

Zerobim08 said:
Which apps the text too small? I put in middle and text size for most apps are ok for outer screen.
If it is browser you can adjust the browser text size independently
Click to expand...
Click to collapse
All the front screen font is to small specify to name a few quick setting notification messages and chrome font and txt are way to small for me
I don't think theres a good way to increase the Chrome font size on android like there is on windows all you can do is expand it which not very good