Related
Ok, PC is fine, close any running programs. Hermes has stock WM5 with some programs added. Only reg tweaks are PTT and removed 3G animation at start.
Device syncs normally every day and both Work and Home.
When I follow all the directions, run the Updater - The PPC gets the Color Bars as the Updater is trying to read it....then AS (V4.5) disconnects and closes. (gone from taskbar) I can soft reset the device, reopen AS, they sync just fine. At this point I have the updater do the next, it pulls up the Current ROM info and says it will upgrade to the new one. I select next, and it starts.....and AS closes again. After a minute the upgrade app says it lost connection. (duh!)
Any ideas why?
I'm not a stranger to upgrading roms on PPC's, have several that have both been updated a number of times. No issues, though that several AS versions earlier.
I've given thought to Hard Reseting the device, but I'm wondering if its more AS's fault.
Any and all input much appreciated!
Thank You!
JETninja said:
Ok, PC is fine, close any running programs. Hermes has stock WM5 with some programs added. Only reg tweaks are PTT and removed 3G animation at start.
Device syncs normally every day and both Work and Home.
When I follow all the directions, run the Updater - The PPC gets the Color Bars as the Updater is trying to read it....then AS (V4.5) disconnects and closes. (gone from taskbar) I can soft reset the device, reopen AS, they sync just fine. At this point I have the updater do the next, it pulls up the Current ROM info and says it will upgrade to the new one. I select next, and it starts.....and AS closes again. After a minute the upgrade app says it lost connection. (duh!)
Any ideas why?
I'm not a stranger to upgrading roms on PPC's, have several that have both been updated a number of times. No issues, though that several AS versions earlier.
I've given thought to Hard Reseting the device, but I'm wondering if its more AS's fault.
Any and all input much appreciated!
Thank You!
Click to expand...
Click to collapse
Are you following the directions at THIS GUIDE . What ROM are you trying to put on there? Did you CID unlock the device? Are you running Vista? Do you have .NET 2.0 or 3.0 version?
That should be enough questions to get us started.
Did you read my title? This is the stock ATT WM6 that came out yesterday. No need to unlock the phone, it is a 1 week old ATT 8525 with the stock ATT WM5 Rom on it.....
Windows XP SP2+ PC.
If it's the rom RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship maybe it had some problems because if you go to the official release site http://www.htcamerica.net/support/8525/software-downloads.html they are still showing the WM5 rom for download.
There may have been a problem with the release and they pulled it back for some reason. Just a thought and not much help I'm afraid.
Yes thats it. When it ID's my current Rom and what it will upgrade to, it is correct. (it shows it's 3.62 vs my current 2.xx) Many peeps have had no problem upgrading to it. (most find it a very good Rom from the varios sites I read)
And this page at HTC still has it up:
http://www.america.htc.com/support/8525/software-downloads.html
JETninja said:
Ok, PC is fine, close any running programs. Hermes has stock WM5 with some programs added. Only reg tweaks are PTT and removed 3G animation at start.
Device syncs normally every day and both Work and Home.
When I follow all the directions, run the Updater - The PPC gets the Color Bars as the Updater is trying to read it....then AS (V4.5) disconnects and closes. (gone from taskbar) I can soft reset the device, reopen AS, they sync just fine. At this point I have the updater do the next, it pulls up the Current ROM info and says it will upgrade to the new one. I select next, and it starts.....and AS closes again. After a minute the upgrade app says it lost connection. (duh!)
Any ideas why?
I'm not a stranger to upgrading roms on PPC's, have several that have both been updated a number of times. No issues, though that several AS versions earlier.
I've given thought to Hard Reseting the device, but I'm wondering if its more AS's fault.
Any and all input much appreciated!
Thank You!
Click to expand...
Click to collapse
You just need to wait for a while AS shuts down that is normal be patient and it will start updating you will see a progress bar will take approx 10 min after that
@brorex he can wait till christmas next year, if the updater cant communicate with the device , because it has closed AS then it will never update.
@JETninja
try doing what i said to this guy here,
http://forum.xda-developers.com/showthread.php?t=341282
yesterday he upgraded with the same rom and device and it worked
brorex said:
You just need to wait for a while AS shuts down that is normal be patient and it will start updating you will see a progress bar will take approx 10 min after that
Click to expand...
Click to collapse
I thought that too, but after the color bar test when it want to set you up to actually install the ROM, the Upgrader whats you to make sure there is an active connection with AS. Well, there isn't. It shut down and the PPC is still showing the color bars. I can reset it, then re-sync to AS. (after having to re-launch AS from the Program Files - it no longer resides in the Tray when it shuts down during the process) I then get it going again, it attempts to start the ROM upgrade, AS quits again.....about a min later I get the Communication Error message....
I'm downloading a 2nd copy right now, will try it as soon as it completes...
*Edit...think I have an idea what I'm doing wrong, I have it connected and synced too early, the first part of the ROM updater is just a PC test, I'm thinking the PPC should not have been connected at that time. Re-trying it now.....
Try putting it in boot loader and upload...thats what i did when i updated my 8525...Very much like the new ROM...
Going to give it a shot here at work on this PC. If no go still, will try the above mentioned methods. PC at home kept getting communication errors...
i had the same problem
make the connection at AS then start the update process.... the 8525 will go into 3 bar mode and when the update gets to the upgrading rom screen... the installed rom wont show up.... hit upgrade... and then continue and it will work.... i was stuck there for a while too because if i waited for the istallation to load then made the as connection the right image would show up in the installer but then it would stop working after that.....
I just put this rom on my 8525 and it worked well for me. My 8525 is unlocked with supercid so I had to extract the OS and update using the methods described for working with SPL-140 Olipro with IPL-1.01 or the "How not to Brick thread".
That won't help you much as you don't want to do that mod to your New 8525 and void the warranty, but thought you might like to know the stock OS seems pretty stable at this point and I have had no problems yet.
Thanks everyone! It finally worked here on my Work PC. At home I could get to the Bootloader, but it would lose connection for some reason. Here I lost it the first time, but tried it again and it managed to stay connected and apply the update. Got it up and running, applied owner info, just now re-doing the AS relationship. (a good 500+ contacts! LOL! It'll take a little while as usual!)
Then it's back to all the tweaks I like so far...and some new ones I've held up on since I've been waiting for WM6.
Out of my 3 PDA's (2 ipaqs and this puppy) this one has certainly been the trickiest ROM update, but it seems to be more my device since most don't have this much trouble.
Thanks again!
So far- So good, but just one problem- BATTERY!!!
After I installed upgrade, my battery drains in few hours... I reset phone, I reloded upgrade- nothing helps! Warranty still in affect, but phone worked well and I'm positive- hardware is OK. What else can i do to fix this problem?
I have the same problem
ai6908 said:
Try putting it in boot loader and upload...thats what i did when i updated my 8525...Very much like the new ROM...
Click to expand...
Click to collapse
I have the same problem exactly. As soon as I start the upgrade the device immediately sleeps and the connection is lost. 1 minute later I get a Connection error message.
I am new to all this. How do i put the machine in 'boot loader' mode?
Thanks
Just did this rom update again on a 8525 the installation went extracting files active sync shut down wait a few minutes nothing happens the the upgrade screen no ACTIVESYNC connection while update is happening as soon as device is in bootloader mode activesync closes out
I am having an issue with updating a Red AT&T Galaxy Siii OTA. I am not rooted (and have never been rooted on this phone), running stock ROM, currently on baseband I747UCLG1. Everytime I try to update OTA manually, I get an error that says, "Communication Failed. The server is currently unavailable. Your device will automatically check for updates within the next 48 hours."
I have also noticed a few others in the update thread having the same issue, but I haven't seen a solution posted. That thread is mostly about issues with updating on a rooted phone, so I thought I would start a new thread focused on this issue.
I have tried the following:
1. Tried on more than one wifi network to eliminate possibility that there is any issue with my network.
2. Cleared the AT&T Update application cache and tried again - multiple times.
3. Did a full factory reset, and tried again.
None of these has resulted in me being able to update OTA. Are there any others out there like me? Has anyone found a solution yet?
robertlewisca said:
I am having an issue with updating a Red AT&T Galaxy Siii OTA. I am not rooted (and have never been rooted on this phone), running stock ROM, currently on baseband I747UCLG1. Everytime I try to update OTA manually, I get an error that says, "Communication Failed. The server is currently unavailable. Your device will automatically check for updates within the next 48 hours."
I have also noticed a few others in the update thread having the same issue, but I haven't seen a solution posted. That thread is mostly about issues with updating on a rooted phone, so I thought I would start a new thread focused on this issue.
I have tried the following:
1. Tried on more than one wifi network to eliminate possibility that there is any issue with my network.
2. Cleared the AT&T Update application cache and tried again - multiple times.
3. Did a full factory reset, and tried again.
None of these has resulted in me being able to update OTA. Are there any others out there like me? Has anyone found a solution yet?
Click to expand...
Click to collapse
I was having the same exact problem. I even changed phones thru warranty. The new phone did the same thing. New SIM card didn't help. I had a guy at tech support to push the update to me.
I am having mine replaced under warranty as well. I hope it ultimately fixes the problem. What I don't want is to have to contact AT&T tech support every time there is an update and ask them to 'push' it to me - then have to explain the entire issue over again, and be forced to go through their trouble-shooting again which includes them insisting I do a factory reset.
Is there anyone else out there having this issue? I would like to get a sense for whether this is pretty isolated, or whether it's a bit more common.
IDK, co-worker with a Skyrocket has had the same issue, but he doesn't care about the update, so he hasn't bothered to get it resolved.
If I didn't have a red GS3, I could goof around and tell you that is what the problem is...
Actually, if it were me having the issue, I'd walk into AT&T and have their guys mess around with it. No telling why some have more issues than others.
robertlewisca said:
I am having mine replaced under warranty as well. I hope it ultimately fixes the problem. What I don't want is to have to contact AT&T tech support every time there is an update and ask them to 'push' it to me - then have to explain the entire issue over again, and be forced to go through their trouble-shooting again which includes them insisting I do a factory reset.
Is there anyone else out there having this issue? I would like to get a sense for whether this is pretty isolated, or whether it's a bit more common.
Click to expand...
Click to collapse
i had the exact issue went to att yesterday and tried a new sim card, but that didnt work. i tried everything you did with no suck luck. the want to warranty out my phone but im not dealing with them again so i just rooted and flashed it. i also have the red one... maybe its just this color since it came out later with a different baseband version?
Not really a solution but you could install this http://forum.xda-developers.com/showthread.php?t=1902178 to be fully stock LH9 with Root. Or use the OTA zip from here http://forum.xda-developers.com/showthread.php?t=1896773.
aboveusonlysky said:
i had the exact issue went to att yesterday and tried a new sim card, but that didnt work. i tried everything you did with no suck luck. the want to warranty out my phone but im not dealing with them again so i just rooted and flashed it. i also have the red one... maybe its just this color since it came out later with a different baseband version?
Click to expand...
Click to collapse
No, It's not just because it's red, regardless of their original baseband versions.
Otherwise, I wouldn't have been able to update.
78c10 said:
No, It's not just because it's red, regardless of their original baseband versions.
Otherwise, I wouldn't have been able to update.
Click to expand...
Click to collapse
You mention in your signature that your phone is rooted. So, did you update OTA then root, or did you update after rooting through some other method? The challenge some of us are having is that we are not rooted, and cannot update OTA because of the 'server error' it gives us everytime we try.
Problem Solved - for me at least
Well, the problem is solved for me, and I thought I would share what I found out here in hopes it helps someone else.
First, I had the phone replaced under warranty. It appears to be a brand new phone. When I received the new phone, I started it up, went through the normal startup stuff - entered my Google account information, it backed up my info and settings. Before I loaded any apps, I went straight to the update screen, and tried to check for an update. I again got the 'communication failed' error. Bummer.
So, then, I did a factory reset on the new phone, but this time instead of entering the initial Google account info on the startup screens, I skipped through all of the initial screens, got to the home screen, then went straight to the update screen - and this time it worked! So, it must be something to do with the initial screens, and entering Google account information that caused the problem.
Then, I got to thinking - perhaps this might work on my old phone too. Since I just got the warranty phone today, I still had my old phone (which needs to be sent back). So, I did a factory reset on it, skipped all of the initial screens where it asks for Google account information, and it still didn't work on the old phone. So, I'm not sure what the original issue was.
By the way, after the update installed on the new phone, and I went through and entered all of the Google account settings, and then checked for the update again, and there was no error.
So, perhaps this might be helpful for others?
Hi all!
I just got my T-Mobile G3 today. I immediately rooted it using StumpRoot and then proceeded to start ripping out TMobile & LG bloatware.
I saw the OTA update which after some research must be D85110M. It seemed reasonable so I went ahead and hit update, planning to reroot afterwards. I looked back to my computer.
About 5 minutes later, I look down, only to find my phone rebooted. I go to system settings, and notice that my build version is still D85110C, which is what my G3 came with. In addition, the OTA update notification is nowhere to be found. I have tried going into settings and searching for a new update, but it appears my phone thinks the update was installed, but it clearly has not been. I cannot imagine there was any errors in the process, as it should have just ran while plugged in.
Any ideas?
Hi all. At 4:20 AM PDT (the notification sys 8:20AM for some reason) this morning (June 12) my Note 4 buzzed and woke up and let me know there was a software update available. Any idea what this is?
I didn't install the small security update last month yet, is this just that update trying to be more forceful (the notification will not go away)? Or is it a new update?
Try it, and let us know what it is !
I didn't install last month's security update myself for the fear of losing that slim chance of an unlocked bootloader and root..lol
I haven't received a notification about an update this month..would you happen to have a description of the update?
Well, the notification wasn't going away and I accidentally hit continue and it rebooted and installed whatever it was.
Took it's sweet time installing and then optimizing apps, and as far as I'm aware nothing changed. Same baseband, same kernel, same build number (LMY47X.N910AUCU2DOI3) according to About Device.
Also my phone is starting to show me the same annoying screen that started appearing when the security update came out saying to connect to wifi to download another update (whatever update was installed today, it downloaded itself via mobile, not wifi).
So I am rather confused as to what the 'update' I installed was.
Cliff notes: rooted/unlocked xl on stock 8.1 ota. that I sideloaded. Phone installed 9 ota, requested restart, now im on 9. I honestly do not remember accepting update.
How can this happen? and will there be issues?
More Details:
So an odd thing happened to today. My phone, a rooted/unlocked running stock rom, got a notification for an update to 9. I have had my phone since 1/17, and I have been rooted unlocked since day one. This is the first time I have received a update notification. I ignored it figuring ill just get the ota and sideload it like i have done previously. Later today my battery was low and I get a message stating the update install is paused due to low battery. Once it charged enough it told me to restart phone which i did, then quickly realized it may have been a bad idea. Phone booted, told me i had an unlocked phone blah blah, then I noticed my custom loading screen was replaced by the standard google screen. 30 seconds later android 9 boots up. everything works fine, lost root though.
specd_out said:
Cliff notes: rooted/unlocked xl on stock 8.1 ota. that I sideloaded. Phone installed 9 ota, requested restart, now im on 9. I honestly do not remember accepting update.
How can this happen? and will there be issues?
More Details:
So an odd thing happened to today. My phone, a rooted/unlocked running stock rom, got a notification for an update to 9. I have had my phone since 1/17, and I have been rooted unlocked since day one. This is the first time I have received a update notification. I ignored it figuring ill just get the ota and sideload it like i have done previously. Later today my battery was low and I get a message stating the update install is paused due to low battery. Once it charged enough it told me to restart phone which i did, then quickly realized it may have been a bad idea. Phone booted, told me i had an unlocked phone blah blah, then I noticed my custom loading screen was replaced by the standard google screen. 30 seconds later android 9 boots up. everything works fine, lost root though.
Click to expand...
Click to collapse
my phone is still on 8.1 and a check say's up to date, I have downloaded 9. ppr ota , would like to know before i side load, have you got root back ? I use magisk .
I have not attempted to get root back.
Did you have TWRP? Honestly, I'm in a situation where I'd like that to happen. Unfortunately I don't have access to my PC and would like to take the final OTA to Pie, but I'm rooted with Magisk, and.have TWRP installed, I'm worried about a bootloop.
I'm just trying to figure out if there is a way to force my phone to get the OTA update the normal way. My Pixel picked it up as soon as I manually checked for an OTA Update. My daily driver Pixel XL has been saying that I am up to date for the past 22 - 23 hours since the update went live, so I'm still stuck on 8.1.0. Does Google drip feed the update out in blocks based on IMEI to limit the impact on the download server?