Related
Hello,
I executed the Hard SPL cab and went into bootloader or some sort of a multi colored screen which says IPL - 0.50 Trin100 and underneath it says SPL 3.03.0000. It connects to my computer and says USB but when I attempt to flash the new WM6 rom which I just downloaded from the rapidshare it resets the machine and continues to remain on this screen of multi colored stuff. I cannot seem to get out of it no matter what I do. What do i need to do to abort the multi colored screen or allow it to flash my HTC trinity with the Dopod WM6 rom?
Thanks,
Gilbert
PS: please don't shoot me if this was discussed elsewhere. i searched and could not fine anyting
happened to me yesterday.
with this screen install AGAIN the hard....
see
http://forum.xda-developers.com/showthread.php?t=316113
and
http://forum.xda-developers.com/showthread.php?t=312499 -page 45
How? I try to execute again the Hard SPL file and it gives me an error and says close window on PC.
Thanks,
Gilbert
it keeps giving me error in connection and i think i bricked my phone i tried to reinstall several times and i get the same results. Poor me.
Same hapen to me, then ive tried to instal over it a another rom and it came to life.
if you're in the bootloader already, try and run the RUU (update program) again on your pc after reconnecting your device.. if that doesn't work, please give details of the error. I don't think you're bricked yet
racerx_ said:
if you're in the bootloader already, try and run the RUU (update program) again on your pc after reconnecting your device.. if that doesn't work, please give details of the error. I don't think you're bricked yet
Click to expand...
Click to collapse
Thanks for your help. I get Error 260:
The update utility cannot connect to your pda. please check usb is connected. click exit to quit.
When I try to run the upgrade alone in XP it starts at 1% then resets the bootloader.
Thanks,
Gilbert
k which upgrade are you running? still trying to get hard spl working, or running the Dopod WM6 upgrade?
*i've been having some troubles upgrading today too, with the WM6.. scary times ha*
racerx_ said:
k which upgrade are you running? still trying to get hard spl working, or running the Dopod WM6 upgrade?
*i've been having some troubles upgrading today too, with the WM6.. scary times ha*
Click to expand...
Click to collapse
I am trying to upgrade the
RUU_Trinity_DOPODASIA_WWE_3.00.707.17_6275_1.46.00.11_108_Ship but i also tried to reflash the 1.23 HTC rom with GPS to see if it would flash since my device is an HTC trinity and not dopod but the same thing keeps happening.
Try to flash PDAVIET version, my came to life doing this
have you tried to flash any other ROM? I was stuck with the same thing, but managed to flash a cooked ROM..
what's your bootloader showing?
if you fail to flash any other ROM, i think you need to try the stack overfow exploit posted here.. http://forum.xda-developers.com/showthread.php?t=308691&highlight=error+206
it's a bit technical, but i think it's your best bet if all else fails.. Pof might be able to help you over there
No matter what i do, what rom i try to flash i get the same damn error message: Error 260 - Connection!!! I am connected so I don't what is wrong with it. I will try some more then decide to take a hammer and break it into 1000 peices.
Thanks.
racerx_ said:
have you tried to flash any other ROM? I was stuck with the same thing, but managed to flash a cooked ROM..
what's your bootloader showing?
if you fail to flash any other ROM, i think you need to try the stack overfow exploit posted here.. http://forum.xda-developers.com/showthread.php?t=308691&highlight=error+206
it's a bit technical, but i think it's your best bet if all else fails.. Pof might be able to help you over there
Click to expand...
Click to collapse
My bootloader is showing the following:
Trin100
IPL-0.50
Trin100
SPL-3.03.0000
Thanks for all your help.
hmmm... i'm not familiar with that SPL number... unless somehow that got halfway updated with the WM6 update.
I think you better head to that thread and try the stack exploit. Did you try loading a cooked ROM to see what happens?
that is it. i give up. i am not experienced in messing with codes. i am going to retire the device for good and use a regular phone. this is crap. thanks for ur help.
oh, that is the SPL version of the new ROM... i guess you weren't using hard spl when you tried to flash it?
ha, well don't give up too quick.. that's one expensive retired device you've got there.
Just keep cool and you should try to install an official Rom to downgrade this SPL !!
Gilbert said:
I will try some more then decide to take a hammer and break it into 1000 peices.
Thanks.
Click to expand...
Click to collapse
Help!
My bootloader is showing the following:
Trin100
IPL-1.00
Trin100
SPL-9.99.CP
When upgrading with the new released WM6 ROM, it keeps failing at 28%
Please help!
best bet for you, is load a different ROM now. Either cooked or official. That will get your device out of crash-proof spl bootloader.
Once the ROM is loaded, if you want to try the official wm6 again, run SSPL first and see if it'll work for you
p.s. i pm'd you my handphone number in case you've got trouble still..
Gilbert said:
My bootloader is showing the following:
Trin100
IPL-0.50
Trin100
SPL-3.03.0000
Thanks for all your help.
Click to expand...
Click to collapse
Hi Gilbert,
Im having exactly the same problem as you. Right now im in the middle of flashing it back down to WM5 (its working at the moment at 17%).
Hopefully after this i will be able to flash back to WM6 (Most probably will go back to AX3L for now).
Hope this helps you out (im quite stressed about it too!)
Edit: I have just finished flashing to Official WM5, now flashing back to AX3L WM6. It works!
I'm a bit confused here I have managed to flash my o2 orbit from the factory o2 wm6 to wm6 premium plus rom, everything worked fine. Then I tried to flash to black & blue 4.3, I got a 302 error, I went through the recovery process and the same happened again. I managed to get the factory rom from the o2 website and it flashes fine every time but whenever I try to flash with any other rom even the premium plus which worked before, I get the 302 error, do I need to CID Unlock it? I'm stuck, Any help would be much appreciated.
lj-_- said:
I'm a bit confused here I have managed to flash my o2 orbit from the factory o2 wm6 to wm6 premium plus rom, everything worked fine. Then I tried to flash to black & blue 4.3, I got a 302 error, I went through the recovery process and the same happened again. I managed to get the factory rom from the o2 website and it flashes fine every time but whenever I try to flash with any other rom even the premium plus which worked before, I get the 302 error, do I need to CID Unlock it? I'm stuck, Any help would be much appreciated.
Click to expand...
Click to collapse
You must run USPL to flash other ROM than your original. If you flash other roms than supplied with your device, you must CID unlock your bootloader and then will be everything fine.
This is why I am confused, how come the wm6 premium plus rom worked first time and now it dosn't . I use the uspl utility first like I did the first time, the spl then changes to 1.11.0000, then I do the rom update. I didn't do a cid unlock the first time but it worked. My brother has the same o2 xda and has also updated to the wm6 premium plus rom from the factory rom, but never did a cid unlock either.
Yes it is a bit strange, but you have to try use the uspl tool again and again, in some version of uspl i hade succes on 5. try. Or look for other version of USPL, maybe you have the old one.
True, I'll try another uspl. How can I tell if it's a new one? I take it I'm doing the procedure correctly ( Run USPL once, then reset, then install rom) ? or run uspl more than once ?
No, run just once, if succesfull the device will reboot, wait untill the activesync will connect to your device and than run romupdate.When possible after the reboot turn to fly mode and wait till activesync will be syncronised with the device and this time run the update.
Thanks for the help mate, I'll keep on trying that
about uspl
hey wat is uspl and from where u can download this utility for wizard ! i m having the same 302 error while flashing a crossbow rom , active sync dont detect my fone now its been bricked n stuked on bootloader screen ! plz help
z0d1ak said:
hey wat is uspl and from where u can download this utility for wizard ! i m having the same 302 error while flashing a crossbow rom , active sync dont detect my fone now its been bricked n stuked on bootloader screen ! plz help
Click to expand...
Click to collapse
Try to search the forum, you will find the uspl tool. If you see the color screen, you can flash just your original rom version.
I search forum but cant find answer. My Artemis is HTC P3300 with original WM6. SPL is 1.11.
I tryed to flash two ROM-s: Artemis Vanila 2.01 and O2 Premium 2.0 and get same error 260 connection where activesync disconnect.
Please can someone tell me what to do? What I am doing wrong?
Renta said:
I search forum but cant find answer. My Artemis is HTC P3300 with original WM6. SPL is 1.11.
I tryed to install two ROM-s: Artemis Vanila 2.01 and O2 Premium 2.0 and get same error 206 connection where activesync dissconnect.
Please can someone tell me what to do? What I am doing wrong?
Click to expand...
Click to collapse
there are lots of posts about this, the best way to fix it seems to be to flash back to the original ROM and then try again.
I really search forum but answers did not help me. I tryed also SD flash but cant start a bootloader-push down voice dial+on/off+reset button and nothing happend.
Ok, I dont have original WM5 ROM on my desktop PC only official WM6. Is it enough to hard reset or just flash back official WM6? Sorry if I ask stupid questions.
Maybe I wasnt clear enough in a first post.. I originaly had WM5 and than I flash official WM6. So, I dont have WM5 ROM anymore. I can only flash back to WM6. I try to flash WM6 and same error apear.. I will try to find on net originaly WM5 and flash it than we will see..
I found original WM5 ENG Rom on the web and try to flash but get same error again! I really dont know what to do anymore.. Tryed SD flash but bootloader didnt start, trying flash back with original WM5 also failed..
Who can help me?? People it is christmas time come on...
Same issue here.
Trying to flash from Artemis Touch 3.01 lite to Full version.
Having problems with Error 260.
It's normally because you are trying to flash with a SDHC card in.
Thanks
Ok, at the time you get the error, I presume your device has gone into Bootloader mode? If yes, then without doing anything to your device, stay in the boot loader screen and try running Rom Update process again. This time it may go through it.
Regards,
Carty..
have you removed your storage card while updating ?
With the new sdhc drivers there could be problems when the storage card is insert into device.... hth
ups....just saw Juice05's answer....i was too late with my answer
Help, I have HSPL, SSPL, and Energy's July 10 rom, and i can't update my rom to the 24 july version because i hang on the multicolored screen... Help guys
HSPL 3.
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Please...
Does someone can help me?
it seems my problem can come from vista drivers. I foud a topic :
http://mahmood1.com/upgrade_pocket_pc_ruu_in_vista.aspx
But even folowing the instructions my update is still locked at 0% and tells me an error 262.
I ve done the whole instructions and installed the old driver but no matters. Somebody knows a way to solve my problem?
cdfr31 said:
Hello,
I am trying to flash my Diamond radio with RUU and radio 10.0.25.05 and my ROM is bElite v0.95 Premium.
I have flashed my ROM without problem but i can't manage to flash my radio. Eadch time i am launching flash process for radio, the process is beginning but stops at 0% and it fails because of a connection problem (error 262)
Could someone tells me what is the problem and helps me?
I have searche d everywhere in the forum. I ve heard about a unsigned and signed SPL. Maybe it's the same trick about RUU and I haven t got the good one...? Could someone just give me a link to the radio version 10.0.25.05 and to the Diamond Custom RUU I could use?
I am afraid to brick my phone...
Thanks for you answer
Click to expand...
Click to collapse
Using signed Hard-SPL?
Use this this to flash your radio : http://htcroms.aplace4u.biz/signed/radio/Diamond_Radio_1.00.25.05.rar
Hi Corian,
Thnaks to you I ve finaly flashed my radio!
Your trick was the good one.
Now I am trying to install a new rom casue i dont like the 0.95 bepe elite.
I have exactly the same problem with every flash i am attempting. It stays at 0% and tells me a 262 error.
My SPL is olinex 1.30.
Could you tell me whats the best and if you can give me the link to download the good files.
I d like to install an official HTC Rom and maybe for this i have to change the SPL?
Thanks for your great help.
HI,
Finally I have solved all py problems.
The problem was coming from the hard SPL I had installed.
I ve managed to change the hard spl which wasn t possible. I had to force the mode bootloadrer and then the hard spl was flashed and replaced by 1.40 Olinex unsigned.
Then I flashed rom and radio and splash screen without any problem.
In fact the whole thing about drvier Vista wasn t the problem I think.
Thanks to Corian who helped me to identify the source of the problem : incompatibility with hard spl taking only signed things.
I have ha diamond P3700 with the latest stock rom 2.03xxxNOR (norwegian) ,
Together with this upgrade came the SPL 2.03
I have tried a million times to put HardSPL both from Olinex and the 1.24 , The same problem happens all the time. The phone sync with active sync , can flash original HTC rom , but with any of the hardSPL the phone disconnects after turning black and after a few minutes I get the error message 260 , the phone is not connected. The PC cant recognize the USB device before this happenes.
I`ve tried to run SSPL manually, i`ve tried 4 computers and different USB.
For me it seems like the new SPL 2.03 blockes any attempt of putting something non-stock on my phone Anyway to bypass this???
Hello,
When I bought my Diamond I upgraded it from 1.93PTG to 2.03PTG.
Although, I prefer English interface. So, I hard-spl'd it with OliPro's but I still couldn't flash the 2.03 Europe one.
So, after searching, I found a Hard-SPL 1.24 (followed the instructions) and everything went fine...
Maybe you should try this one also...
Hard-SPL post:
http://forum.xda-developers.com/showthread.php?t=408621&highlight=hard+spl
Best regards,
Nuno
I had the stock NOR 2.03 rom too, and flashed with no problems using Olinex unsigned hardspl 1.40.
Using a WM 6.5 ROM atm, and everything works well