I've been wracking my brain trying to figure this out. I'm trying to establish an internet connection through my tilt 2 from my other pda. When I pair I see the dial up networking option. When I connect, it seems to connect but it won't establish an internet connection and gets dropped.
I've used this method to connect to my old Nokia E62 so I know my pda is able to make these types of connections. I was wondering if it's there's a work around for allowing this. I'm using the Energy Rom Phoenix2 build 21876.
I've searched hi and low but doesn't seem anyone else has had this problem.
Anyone have any ideas on this?
If the other PDA has wifi then use the WIFI sharing..
I'll have to go that route. I was just hoping to save on battery consumption
Same problem for me on the Tilt 2 on e2ROM. My old Tilt with WM6.1 works with BT DUN but not WM6.5 I guess. But BT PAN does work great on e2ROM just not DUN.
wpbear said:
Same problem for me on the Tilt 2 on e2ROM. My old Tilt with WM6.1 works with BT DUN but not WM6.5 I guess. But BT PAN does work great on e2ROM just not DUN.
Click to expand...
Click to collapse
It's not a wm6.5 issuse because I flashed a 6.1 ROM and I still had the same problem. I'm thinking it's a problem with the BT stack they're using.
ppa25 said:
It's not a wm6.5 issuse because I flashed a 6.1 ROM and I still had the same problem. I'm thinking it's a problem with the BT stack they're using.
Click to expand...
Click to collapse
I gave up for now. I have finals to study for. Maybe I'll try again in a few weeks. If you get it then post it for everyone. Thank you.
Has anyone ever found a solution to this?
I'm trying to the same thing with a Trimble Survey Controller and my Tilt2. The survey specific software is written to only use a DUN for internet access in order to acquire NTRIP corrections.
What really sucks is that I can use Wifi to give the PDA Internet access as confirmed with PIE. But the survey software will not use the Wifi
if your wanting to do it over bluetooth set the dial as *#99# i belive to make the other pda do gprs and send the data back via bluetooth
Related
Any one has with problem?
If I turn on bluetooth, I cannot connet to Wi-Fi.
which rom? black3?
I have Dutty's Windows Mobile 6 Premium v2
I dunno, I have Dutty v2 medium on my 8525 and both wifi and bluetooth are working together, howbeit, wifi is quite slow on loading sites on PIE. I'm doing both right now, listening on my bluetooth headpiece, while online with wifi, not cingular. So it's not Dutty's ROM.
i had no bluetooth when switch wifi on with black3. try custels new rom, he will release it in a few hours.
regards chief
Anybody had this wifi problem
Morning all
I upgraded to Black 3.0.1 on Friday. My radio is 1.41.00.10, and SPL.2.10.Olipro
Since upgrading my wifi performance is terrible. I litterally have to stand next to my router to connect. It used to be great. I've tried it on 4 wireless networks, all the same result. I've set the performance slider on the phone, and this hasn't altered it.
Has anybody got any ideas?
Korihor, try this link. Maybe it'll help. But you gotta read and search!
http://forum.xda-developers.com/showthread.php?t=303913
ablousov and Chiefcooker, I've already told you both bluetooth and wifi work together on Dutty's v2. and I've tried both together on the new lvsw ROM, also this afternoon, and they work well togetherwith that ROM. I found that I have to turn the wifi on 1st, and then turn on the BT 2nd to listen to any mp3 on WMP via my BT earpiece. Now if you're talking about streaming on a BT headset, I don't do that,so I wouldn't know.
Thanks, will try it.
Update: I downgraded the SPL, and still no luck with it. I'm sat about 3 metres from an access point, with one wall between us. Always got an excellent signal, and still shows as unavailable.
Thanks anyway
Gary
whatledog said:
Korihor, try this link. Maybe it'll help. But you gotta read and search!
http://forum.xda-developers.com/showthread.php?t=303913
ablousov and Chiefcooker, I've already told you both bluetooth and wifi work together on Dutty's v2. and I've tried both together on the new lvsw ROM, also this afternoon, and they work well togetherwith that ROM. I found that I have to turn the wifi on 1st, and then turn on the BT 2nd to listen to any mp3 on WMP via my BT earpiece. Now if you're talking about streaming on a BT headset, I don't do that,so I wouldn't know.
Click to expand...
Click to collapse
IT s a known problem with the black rom which happens intermittently... It seems to do something with the wireless performance... Some people are unable to connect at all...
Just have to hope for a fix....
I am using a tmobile vario 2 and am getting the same issue...
Hey all,
I've got a bit of a problem. Since the release of wm5 AKU 3.0, BT DUN is no longer present, instead we are supposed to use BT PAN. I read the articles in which microsoft explains why they removed it, and also that it is optional in WM6. I saw the .cab files in MUN's WM6 thread but I can't get them to work.
I use BT DUN to dial in to my domain with my VPN at the windows logon screen. BT PAN is about as useful as a frying pan in this case because I need to be logged in to connect BT PAN...I think they call that a conundrum
Anyway ever since I've had the trinity I have been using ICS with USB which does auto connect before logon. The thing is I prefer BT because it is just simply more convenient.
If anyone has a solution, either buy adding a working BT DUN profile or with BT PAN I'd really like to know about it.
Look here:
http://forum.xda-developers.com/showthread.php?t=307235
I already read that thread but it's a no go
I also would really need the DUN Profile, but it does not work on mine too...
I just went and tried superdave's widcomm stack for the hermes, no joy though.
I'm running WM6 SE (not TE) and my DUN profile is flawless.
Use it from my TomTom 910, laptop and work PDA.
Wish PAN was supported by other devices so I could use all 3 at once.
what's WM6 SE?
and where can I get it?
Hi,
I upgraded my S621 to the new Rogers WM6. Things are great and so far so good....
However, today I just got the new TomTom Go 720 and in order for all of the data stuff to work (read my text messages to me, reply to text messages, use the traffic service etc) I require Bluetooth DUN.
Apparently this USED to be part of WM5 but Microsoft decided to pull it out in favour of Bluetooth PAN.
A lot of good this does me and the other TomTom users....... ARGH!
Is there a way I can setup BlueTooth DUN on this phone?
There have been rumours that it is in there or something can be added to make it work again...
Any help would be greatly appreciated.
Thanks
Derek
This thread: http://forum.xda-developers.com/showthread.php?t=314371
should help...specifically page 4...
Can any body tell me the best 6.1 cab to use tom tom on have trouble with bluetooth at the moment wont stay paired up.
Will consider using a 6.0 cab if this is the only way.
is there a fix
thank you
Had no problems with either Farias R-32 versions, and Schaps was fine too.
i found TomTom pretty good with pairing and finding bluetooth signals.
TNT 19999
Hy...
no problem with this rom.... i hope this notice can help you.....
If you need some other information cantact me!!!
Bye!!
there must be another problem, mabe with your bt-gps. Been flashing about 7 different 6.0 and 6.1 roms's the last few weeks and none of them heve instable bluetooth gps pairing and using.
i'm using a bt-gps and bt-stereo headset intensive together. listening to mp3, on the same time tomtom is telling directions, while on the background pushmail is bringing me new mail that i can read at the same time, being interrupted for incoming sms.
on top of that all an incoming phone call on my bt-headset will work, just as using a voice command to dial a number myself. and the mp3 player automaticaly pauses and restarts at the end of the phonecall.
tomtom keeps working.
just when ending a phonecall sometime the mp3 sound goes to the pda speaker instead of the headset.
Pays 6.1 ROM works with tt6 and bt.
My hermes kept droping out with TomTomon WM5 all the time, but since I switched to WM6 i never had a single drop.
For me WM5 > WM6 stopped all TomTom problems I had
l3it3r said:
Pays 6.1 ROM works with tt6 and bt.
Click to expand...
Click to collapse
Better late the never: Correct
photoscubaman said:
Can any body tell me the best 6.1 cab to use tom tom on have trouble with bluetooth at the moment wont stay paired up.
Will consider using a 6.0 cab if this is the only way.
is there a fix
thank you
Click to expand...
Click to collapse
hi Photoscuba, i have the exact same problems
First it wont pair properly (says that the key is incorrect).
Its there in the Bluetooth device list, so i open a com port for it then run my gps software, goto detect GPS but then i keep getting GPS reciver wants to pair with you message, as soon as i can answer yes or no, another screen will pop up saying the same
i have asked in several other threads if anyone else is having the same issues, but everyone elses seem fine.
i did read some where about all wm6.1 rom having problems with pairing when using the pass code 0000 (something along the lines of it sending a NULL or a single 0), but i cant find now. ill keep looking for it maybe someone has over come this, on a thread on XDA.
i use a HOLUX GPSlim240 receiver and it works flawlessly with wm6's
im using K's 1.3 at the mo
All these ROMS worked for me
I like to test new ROM and play around a lot.
I have tested Tom Tom 6 and my Bluetooth GPS on the following WM 6.1 ROM all worked.
Below are the ROM in the order i used them.
FARIA-R-32-CLEAN
TNT.19199_Professional_Hermes
CRCs_PHKv12r10
Binky11'sv3_3 - Great Clean ROM and i loved S2U2
PDACorner.V10 - New ROM i am testing right now
What map software and GPS units are everyone using?
maybe theres a incompatibilty problem with certain makes of GPS and wm6.1
im using destinator 7 and igo6 with a holux 240 GPSlim
crusti said:
What map software and GPS units are everyone using?
maybe theres a incompatibilty problem with certain makes of GPS and wm6.1
im using destinator 7 and igo6 with a holux 240 GPSlim
Click to expand...
Click to collapse
Considering they are talking about Tomtom, I assume thats the software they are using....
yea, lol, shoulda seen that coming
but the problem seems to be the gps unit connecting or staying paired to the phone, so if there a list of bluetooth gps units that are working fine with wm6.1 then maybe see why some units wont connect
It all works fine on all the WM6's, so the change is in how wm6.1 handles it as far as i can work out
if theres a list of workin and non working GPS's then maybe i could see what the problem is
Hey everybody...
i been trying to get this to work
i want to passthrough internet to my vogue
bt all the guides i find are using activesync
and i have windows mobile device center
soo there guides don't apply to me..
could someone please help me???
jdm4life said:
Hey everybody...
i been trying to get this to work
i want to passthrough internet to my vogue
bt all the guides i find are using activesync
and i have windows mobile device center
soo there guides don't apply to me..
could someone please help me???
Click to expand...
Click to collapse
What exactly are you trying to accomplish?
1. Setting up a BT PAN
2. Tether your Vogue to your laptop meaning share it's data connection.
jadesse said:
What exactly are you trying to accomplish?
1. Setting up a BT PAN
2. Tether your Vogue to your laptop meaning share it's data connection.
Click to expand...
Click to collapse
im trying to set up a bluetooth pan.. to send internet from my pc to my fone
I don't think that htere is currently anyway to set up a BT Pan. MS BT Stack does not support it. I believe it is an option with some of the Widcomm BT stacks that I have seen.
jadesse said:
I don't think that htere is currently anyway to set up a BT Pan. MS BT Stack does not support it. I believe it is an option with some of the Widcomm BT stacks that I have seen.
Click to expand...
Click to collapse
just use the widcomm stack (which you should be doing already anyways, microsoft stack blows) pair your phone with the computer, go into the internet sharing and set it to bluetooth then connect to your phone using the access point option from the computer and there ya go, internet.