Related
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
here's remote desktop. How do you use it? I don't know how to set it up.
thanks!!!!
now for VPN....
cheers!
The remote desktop client is available in several places in this forum for download.
To set up a VPN:
add a new VPN server connection
enter the name / ip of the server you want to connect to
select the vpn type -- ipsec or pptp
next
enter your user name and password
finish
The only way I have found to connect to the von is to goto
Start-Settings-connections-connections-edit my vpn servers- -- tap & hold MY VPN
select connect
you must be using a plan that assigns you a public IP (not WAP)
hope this helps
JTK said:
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
Click to expand...
Click to collapse
Thanks cmccarter, done it but how will I know I am connected.. It does not say connected anywhere that I can see and when clicking/hold on the item it gives me the option to connect again, not disconnect as I would have thought The other thing is terminal server does not connect. It connects fine on USB. VPN/Remote desktop connects fine using normal internet on pc from outside the network. So I believe the network settings are fine.. How would I know though if I am on WAP or get an IP. Also ow would I know if the VPN is connected?
thanks
fyi
i also have struggled getting rdp to work over a vpn, in particular over 3+/hsdpa
the only i found in wm5 was to add the vpn connect to the exceptions list of the connection manager, so that it didnt disconnect the vpn whem connecting the rdp.
this occurs more when u use an ip address to connect to a work intranet.
suppose if u use the dns name of the machine and not the ip address then it isnt that much of an issue. in wm5 when u put the ip address in it assumes a an internet rather than intranet connection so it disconnects the vpn to look for the ip over the internet
putting the ip into exceptions forced wm5 to not disconnect it when rdp was looking for it.
i cudnt get it to work this way in wm6 so i am also looking for an answer on this.
rdp to my servers when they have crashed and i am on the road wud b wonderful....
Hi,
I've a similar problem.
I use a VPN-1 SecuRemote that normally connect my PC directly to the company network.
Well, using the share modem tool, I'm not able to reach the gateway.
the share modem system give me a private IP that establish a connection between PC and TYTN.
This connection use the Tytn like a gateway to navigate in internet.
Someone know to solve this issue?
Tanks a lot
if i select start the vpn connection, nothing happens - and i can`t ping the IP`s in the VPN. so i think the vpn ist not open - OR the routing entrie is missing....
is there some shiny "pptp - standalone" client?
greets, Nik
for some reason i dont think the vpn option works over 3g/hsdpa, atleast not on my device using t-mob web and walk.
if i connect the vpn when using wifi it connects and everything is fine, if i try and connect when i'm already running a 3g connection it doesn't work.
i dont think the radio stack is capible of handling a 3g connection and a vpn connection. we might need to go down the route of getting a seprate wm vpn client.
Is there some tutorial/help on using hte Remote Desktop Mobile to connect to a PC? I haven't been able to connect TP 2 to my PC running Vista. I put in the Computer name, User name, password, and domain and when I clicked "Connect", it returned an error:
Cannot connect. Likely reasons are:
1. specified computer name or ip does not exist.
2. A network error occured while establishing connection.
I tried both domain name and ip. Made no difference.
I also tried both on 3G as well as WiFi but it made no difference.
You'll need to set up two things:
set the vista machine to accept the remote connections
http://howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/
forward port 3389 on your router if you have one
http://portforward.com/
Then you should be up and running!
'tunes
Thanks, mad-tunes. Got it working now, at least when connected by WiFi. And when the phone and the PC are on the same Wifi network, I can connect simply by putting in the computer ip address. No domain is required and no port configuring required too.
Lord_BlackAdder said:
Thanks, mad-tunes. Got it working now, at least when connected by WiFi. And when the phone and the PC are on the same Wifi network, I can connect simply by putting in the computer ip address. No domain is required and no port configuring required too.
Click to expand...
Click to collapse
Good stuff, glad it helped a bit....
If you can't connect from the outside world (ie, using GPRS), then it's most probably a port forward thing...
If you want to get this bit working: How's the machine you're trying to RDP to connected to the 'net exactly?
(ADSL modem, router etc?)
mad_tunes said:
Good stuff, glad it helped a bit....
If you can't connect from the outside world (ie, using GPRS), then it's most probably a port forward thing...
If you want to get this bit working: How's the machine you're trying to RDP to connected to the 'net exactly?
(ADSL modem, router etc?)
Click to expand...
Click to collapse
Yes, the PC is behind the router. So probably woould need to do port forward as you have suggested. Having tested it yet. Would try this out later this week.
I was wondering, is theres a way to do this if youre on a home edition of windows?
the home edition I dont believe has remote desktop.
Remote desktop mobile using 3G connection
Has anyone gotten remote desktop mobile to work using only a 3G connection? I've got it working perfectly using wifi but can't for the life of me figure out how to do it over 3G. I searched and the closest thing I could find to being helpful was the following:
I had the same problem till I created two VPN connections. One for internal use (WiFi) and one for extenal use (3G).
The internal one uses the internal IP address of the VPN server and the external one uses the external IP address.
You have to sleect which connection you want to use before starting the connection depending on whether u r using WiFi or 3G.
Hope that makes sense. It works 4 me.
Click to expand...
Click to collapse
This makes sense but it's confusing about what to change in the VPN connection settings. Can anyone explain in more detail?
Thank you very much
squirtpunk said:
I was wondering, is theres a way to do this if youre on a home edition of windows?
Click to expand...
Click to collapse
No. You can only use third party solutions like VNC. RDP host is not included in Home Edition.
You have to go into your router and set up a port forward so that 3389 goes to internal IP address of the system you want to remote into. If you have port forwarding/triggering, you can have a different port (eg, 3390) trigger to 3389 internally. If you don't have port forwarding, you can change the listening port from the default 3389 to, eg, 3390 and then you can create a port forward to remote in that way. To access, add :3390 to the end of the remote address (eg, 64.246.222.91:3390). The registry path to the listening port is:
HLKM\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp\PortNumber
You must reboot after changing the setting.
If you have a domain, it is incredibly useful to set up DNS for this, then you can simply enter the DNS name in the client. This works internally as well.
Update: So i just went to a Starbucks and tried using the wifi there to connect to my remote desktop and it couldn't connect!? But it can connect when I'm using the same wifi router as my remote computer does this mean I don't have the router properly port forwarded? Or is it some other issue? Any advice would be great.
Thanks
When you use your wifi at home, it ends up in the same IP subnet as the remote computer, so all you need to do is to enter the computer name.
When you're at a hotspot, you need to enter the public IP address for your router and step up port forwarding. Wifi outside of your home is no different from using EVDO as far as IP addressing is concerned. You must enter via public IP.
If you don't know what your public IP address is, open a browser from any computer at home and go to this URL:
http://whatismyip.com
It will tell you what the public IP is.
Cheap Loop-Hole
I got Remote Desktop to work on 3G.
First open Opera (or what ever your default browser is) set a home page to something that takes at least 5-10 second to load (if longer, even better), like an email account or m.myspace.com. Simple sites like m.google.com won't work because they load to quickly.
Close OPERA: I mean make sure its closed not just minimized.
This next part needs to be done rather quickly, so I advise making Remote Desktop a top icon in your Start Menu.
So Launch opera, and quickly launch Remote Desktop and hit connect.
Remote Desktop will piggy back off the Opera browser connection to get out to your computer.
Note: (make sure remote desktop works at home first, either by wifi, blue tooth, or direct usb, and by checking it from a computer outside of your network) once you know it works you should be able to connect to it.
Also note: as some one stated above, make sure that proper ports have been open on the computer and router than you should be good to go.
I'm sure their is a registry fix to get the remote desktop working without doing this, but this is the only way I've been able to do it for now..
Hope this helps...
---
I'm currently using AT&T Tilt 2 Stock Rom and Radio.
Check this out guys, it might be of some help: http://forum.xda-developers.com/showthread.php?t=533664
Thanks a lot guys! It's working just fine now (on both wifi and 3G!) turns out I didn't have the router properly port forwarded.
just started trying to figure this out today. spent about 15 minutes but couldnt get it going.
just installed windows7 on my old pc and im trying to get my htc tp2 (rhodium) to work with the preinstalled Remote Desktop Mobile application. i forwarded port 3389 on both tcp and udp since i didnt know which was necessary.
is a static ip necessary to get this setup by going into the ipv4 settings? also, what is the application looking for with the input for "domain"? - subnet mask? default gateway for my home network?
so far i have tried the following inputs in my tp2 for Remote Desktop Moble:
Computer: public ip
User Name: windows7 login name
password: windows 7 login password
domain: ???
any help is appreciated. going to try this more when i get home from work.
apathyps said:
just started trying to figure this out today. spent about 15 minutes but couldnt get it going.
just installed windows7 on my old pc and im trying to get my htc tp2 (rhodium) to work with the preinstalled Remote Desktop Mobile application. i forwarded port 3389 on both tcp and udp since i didnt know which was necessary.
is a static ip necessary to get this setup by going into the ipv4 settings? also, what is the application looking for with the input for "domain"? - subnet mask? default gateway for my home network?
so far i have tried the following inputs in my tp2 for Remote Desktop Moble:
Computer: public ip
User Name: windows7 login name
password: windows 7 login password
domain: ???
any help is appreciated. going to try this more when i get home from work.
Click to expand...
Click to collapse
network-wise what you need to do depends on how your PC's connected to the 'net...
if it's connected directly via something like a USB ADSL model or Virgin media cable box, then you'll only need to let 3389 through your PCs firewall.
If it's connected via anything like a router, then you'll also have to allow 3389 through your routers firewall, as well as forwarding port 3389 to your machine inside your network.
it's the port forwarding which needs the internal IP of your PC, so a static one's a good idea (otherwise, if your PCs internal IP address changes it'll stop working). you could set your router to always hand the same IP to your PC MAC address, which can be the best of both worlds (and how I do it).
http://www.portforward.coms a good place to start to find how to forward ports for your router if you're using one..
You also have to go to control panel>system>advanced system settings>remote and set things as you need in the 'remote desktop' section.
if you don't have the 'remote desktop' section, then you're running one of the home versions of the OS which doesn't support Remote desktop conenctions (out of the box )
re domains...if its a normal home PC and nothing to do with a business, then you wont have to enter one at all.
Once you're at home, get your TP2 on your internal network (wifi), and then try to rdp to your machine using its INTERNAL ip (192.168.*.*) and see if that works.
if it does, the PC end's fine and it's your router config you need to get right. if it doesnt, then its something at the PC..
post back here if you still have trouble..
ok, so connecting with the tp2 via 192.xxx.x.x works fine from within the network at home on wifi.
however, once i try and connect with the public ip, it doesnt work. did the port forwarding thing.
i setup the static ip, i tried putting the host pc in the dmz, and still nothing. i tried disabling the host pc's firewall, and nothing.
in remote desktop mobile, im putting in the public ip of the host pc, and have tried filling in the username and password fields, and also tried leaving them blank.
any ideas?
apathyps said:
ok, so connecting with the tp2 via 192.xxx.x.x works fine from within the network at home on wifi.
however, once i try and connect with the public ip, it doesnt work. did the port forwarding thing.
i setup the static ip, i tried putting the host pc in the dmz, and still nothing. i tried disabling the host pc's firewall, and nothing.
in remote desktop mobile, im putting in the public ip of the host pc, and have tried filling in the username and password fields, and also tried leaving them blank.
any ideas?
Click to expand...
Click to collapse
if its workin from inside your network, your PCs set just fine...so it must be the firewall or port forward on your router...
double-check that 3389s alowed through its firewall
and
the forwards set to point UPD+TCP on port 3389 to the current internal IP of your PC.
tbh, I cant think of much else but let me know how you get on
ah, got it working. had to forward from ANY -> 3389, not 3389->3389. duh. works now.
thanks guys
Strange, you shouldn't have had to. RDP defaults to 3389 so the client should be using that from the word go (I know mine do!)...it could be a wierd router thing.
Depending on the exact option(s) you had to change to get it going though, it's making your machine a little more open to the outside world. but maybe not in a huge way....
(so, is it now AnyIP:AnyPort>YourIP:3389 or AnyIp:AnyPort>YourIP:AnyPort? I think forwarding all ports to 3389 would wreck eMule!)
It's probably worth changing the port used from the default though tbh.
Your change it in the PCs registry and add ortno to the end of what you enter into the client.
(so it'd be something like 192.168.0.1:3390, for example)
Then change the rules on the router to match, of course.
'tunes
Hi!
I was able to do Remote Desktop by connecting with my tilt 2 to my local Network so I used my Desktops address (192.168.1.4) as computer name and I was able to connect with the Tilt2.
Now, I am trying to figure out how to do the same but when I am not home thus connected to my network.
I tried using my REAL IP address but it was not able to connect to it.
I am running Windows 7 Ultimate any my tilt 2 has a stock 6.5
Thanks
You'll need to set up port forwarding on your router. Looks like this site has a bunch of guides to do so. You need to set it up to forward port 3389 to your desktop address (looks like 192.168.1.4) and you should be good to go, no specific config necessary on your tp2.
Edit: As a side note for security's sake only allow non-administrator accounts to remotely connect and make sure you use strong passwords!
That worked out great...thanks mate!
Yeah thanks Toleraen! I was just now finally getting around to check out the remote desktop client on both my phones, and was looking for exactly that
Glad I could help
Pretty cool to do this indeed...any other software you consider better than this to remote in to my PC?
shaolin95 said:
Pretty cool to do this indeed...any other software you consider better than this to remote in to my PC?
Click to expand...
Click to collapse
I hear VNC get recommended a lot, but I haven't had a chance to check it out yet (I'll do that once I've tried remote desktop). I've attached the cab for it, but I can't find any threads on it's use, you'll have to dig that up yourself
I must have tried a million different settings over several hours and never was able to connect via 3G or even locally when hooked in through wifi. I used to be able to do this with my Treo 750 with little hassle. I have the port forwarding set up on my Linksys WCG200 router. I have even tried turning all firewalls and encryption off. No joy. Anyone else have a Windows XP setup with a Linksys router that has had success with a Tilt 2 stock ROM? Note: I do not have a static IP. Has anyone successfully done this with a dynamic IP?
I am doing it to Windows 7 with a dynamic IP...I just make sure I got the one for the day(week) before living home if I want to remote in from work.
I use Hamachi to create a VPN connection and then remote into my PC that way, leave hamachi running on my desktop and then just run the mobile version on my phone when I want to remote in, that way there are no open port security issues to worry about and the VPN IP address never changes.
Is it any slower or faster than Remote Desktop?
Zylograth said:
I use Hamachi to create a VPN connection and then remote into my PC that way, leave hamachi running on my desktop and then just run the mobile version on my phone when I want to remote in, that way there are no open port security issues to worry about and the VPN IP address never changes.
Click to expand...
Click to collapse
Sweet! I had no idea hamachi had a mobile client now!!
I'm trying it out as soon as I get home today!
I use "Remote Touch Server" to remotely access my computer. The main reason i use it is because it keeps your computer on while you are accessing it. I use it for a handheld monitor for powerpoint presentations. That way I can see what the computer is doing, and tap the screen to advance to the next slide
I just bought a program called Remote Desktop Client (by Xtralogic) and installed it.
However, when I tried to connect to my work, I get a notification 'Socket Is Not Connected'. I called the helpdesk of my work and they say it is not possible to have the server running on my mobile device......
The address I m trying to connect to is 172.20.20.20 with domain 'flexinet.local'. I used the correct username and password.
Maybe you guys can help me on my way?
First...I wouldn't go sticking those IP details up for the world to see. I'm sure it's safe enough but still. Next, have you checked not only the IP but the ports are correct? Then you should ensure that those ports are forwarded from the external domain you're connecting to.
Another thing you may want to check is if this app needs the prefix, i.e. http://YourDomain.com etc.
Lastly...are you attempting to connect from outside the network? Are you connected to the network via WiFi or are you attempting to connect via 3G from a remote location?
172.20.20.20 is a private address... 10.x.x.x, 192.x.x.x and 172.16.x.x to 172.30.x.x are private ranges and not valid on the internet - you'd need the external ip address or the fully qualified domain name (FQDN)... RDP uses port 3389 (if it's not been changed on the server) so your firewall will also need to be open and the transport you use to connect will also need to allow 3389 (WIFI / 3G)...
That is assuming you're trying to get to your server from outside your local network...
Did you try connecting to your work vpn (if you have one) so you can get inside your work network, then use the rdp client to connect to your machine?
Sent from my HTC Desire using XDA App
Does anyone know of a VNC app that - or any kind of "control my android phone from my PC" that:
1. is NOT Android Screencast
2. WORKS on the CDMA Galaxy Nexus
All the apps I've tried on the market thus far (e.g. droid vnc server) don't work - I think Verizon does something to prevent the IP address from being available to the app, so it reports the IP v6 MAC address and I can't connect to the phone.
Any solution (wired or wireless) would be fine, just one that works well (and is preferably free).
Hey, I'm in the same boat as you, i want to VNC onto my phone from my work PC as it makes my office life so much easier (did this on my iPhone for a couple of years)
I've managed to connect to my Galaxy Nexus GSM via LAN IP fine (IPV6 shows but used IPV4 IP instead from wireless settings) evem though i connected, the screen is blank and i can click but not type so looks like it needs some TLC on the developing side before it'll work :-(
Now for a remote IP you could try whatismyip.com or some simular site but i'm pretty sure most phon operators keep you on an internal network and route you out to the internegt, therefore meaning that you dont have any ports coming into your phone from the internet and therefore can't run any internet services, it has to be connection from your phone to a server not from PC/server on internet to your phone on internet.
I know however that back about 8 years ago i did get a windows mobile http server working, but think it's all changed since then..
Only exception to this would be if your phone was on wifi as you could setup a port forward from the router.
Maybe if TeamViewer made a version which allowed control of the phone, then you'd be able to do what you need.
Regards
Liam
Our VNC Server, VMLite VNC Server, works just find on Galaxy Nexus.
You can use USB connection, or reverse connection to connect if your phone's ip is blocked. i.e., you run tight vnc viwer in listening mode, you run the vnc server on the phone in reverse mode, so the vnc server will connect to the viewer.
Our app actually works w/o rooting.
https://play.google.com/store/apps/details?id=com.vmlite.vncserver&hl=en
The new teamviewer client will be your answer... just wait till its ported correctly to your rom
Are you sure? I thought team viewer is to view PC from android phones, instead of viewing phones from PC, i.e., different direction.
TerryNova said:
The new teamviewer client will be your answer... just wait till its ported correctly to your rom
Click to expand...
Click to collapse