Hi all I have a Telus Snap S510 Phone it has just died, will not turn on at all, USB does not see it light does not come on when plugged in the charger nothing. Tried the whole hold volume down while pressing power, hold volume while pressing power hold volume up while pressing send and end call (as per telus site) and nothing.
If anyone has any suggestions on anything I could do it would be appreciated
Thanks
I wana purchase ur mobile
i wana purchase ur telus snap s510 died.
Related
Hi, today while I was browsing on Firefox, the app closed by itself and the home screen got distorted (the wallpaper got black and some icons started to show up in the background). Since it has happened before, twice in the last week, I tried to reset the phone. However this time the phone did not turn on. I put it in the charger and the LED is also not turning on. I've had it plugged in for about 9 hours now and the LED is still off and the phone is not even getting warm, like it usually does when it's charging. The charger is also not warming up, and when I tried to connect the phone to the computer USB port, Windows doesn't report any power consumption.
I've read some threads about bricking, so I know people mention longer times to get the LED turn red, but is it normal that it doesn't warm up and doesn't suck any power from a USB port?
For anyone familiar with AT&T operations, if I sent it as warranty replacement, would they bother running diagnostics? I have it with LT28i .68 firmware, rooted and with CWM.
Also, is there a way to retrieve the data from the internal SD card? I tried connecting it to the computer and nothing happened. Nothing happens when I press either volume button + power button. An nothing happens when I connect it to the computer pressing either volume button.
Any help will be much appreciated.
Have you tried the Hard reset?
Holding Power Button and Volume button together for at-least 3-5 seconds and you would feel 3 vibration.
auni said:
Have you tried the Hard reset?
Holding Power Button and Volume button together for at-least 3-5 seconds and you would feel 3 vibration.
Click to expand...
Click to collapse
I have. I don't get any vibration with either volume down or volume up + power.
josemald said:
I have. I don't get any vibration with either volume down or volume up + power.
Click to expand...
Click to collapse
Hold VolUP+VolDOWN at the same time, and then press Power button, holding it too, the 3 at same time for some secs...
the_biu said:
Hold VolUP+VolDOWN at the same time, and then press Power button, holding it too, the 3 at same time for some secs...
Click to expand...
Click to collapse
I tried that too, the phone also doesn't respond.
Does ION has removable battery? If yes try to remove it for a while.
If not. Then try the buttons combo with the phone connect to charger...
the_biu said:
Does ION has removable battery? If yes try to remove it for a while.
If not. Then try the buttons combo with the phone connect to charger...
Click to expand...
Click to collapse
The Ion doesn't have a removable battery. I already tried all combinations of power+volume buttons, while disconnected and connected to the charger, and nothing. Maybe the battery somehow got disconnected internally, I don't know if that's even possible.
I've called AT&T, they'll send another warranty replacement, the second replacement I get. Hopefully this one will last enough at least for an early renewal.
I don't know if AT&T still does this but back when I was in the states last year I had them give me an early upgrade because two of the handsets they gave me were faulty (original and one replacement). Try talking to CS Reps sometimes it pays off. You might be able to get an early upgrade if you tell them how this can't keep happening you have important data blah blah blah.
Anyways good luck!
Sent from my LT28i using xda app-developers app
Hello everyone i have a problem with my htc one x .was charging it over night and the next day i found it turned off.Got to turn it on holding the power button for 30 sec but after like a few days it turned off again and does not turn on anymore not with power button holding not even holding power button +volume down + volume up. and seems like it does not take charge either because no led light up when plugged in.the PC does not recolonize it and i dissembled it took of the battery and tried a static electricity discharge and still nothing.. any advice from you guys what should i do.
M8 screen won't come on at phone does power on but the screen does not is any body else had this same issue and what is the fix on this
does anyone have an idea on how to fix this
bdouc said:
M8 screen won't come on at phone does power on but the screen does not is any body else had this same issue and what is the fix on this
does anyone have an idea on how to fix this
Click to expand...
Click to collapse
How can you tell the phone is on if the screen won't come on?
What have u flashed?
Heisenberg420 said:
How can you tell the phone is on if the screen won't come on?
What have u flashed?
Click to expand...
Click to collapse
i can tell the phone is on cause when i plug the phone on my PC sync manager pops up and Auto play also pops up flashed vipeneroneM8 ,last week and phone was working good till today screen started to flash and went off did 3 key reset by holding the power the volume down and volume up while phone was on charger but no luck
bdouc said:
i can tell the phone is on cause when i plug the phone on my PC sync manager pops up and Auto play also pops up flashed vipeneroneM8 ,last week and phone was working good till today screen started to flash and went off did 3 key reset by holding the power the volume down and volume up while phone was on charger but no luck
Click to expand...
Click to collapse
Did you make a nandroid backup before u flashed viper one? If u did enter recovery by rebooting holding down vol down and restore your backup. Or flash your carriers stock firmware. Check the back to stock thread for info on that.
If that doesn't work it's a hardware issue and you should check your warranty and get a replacement.
Thank you guys for the help and for everyone coming together to come up with solution it is deeply appropriated my M8 was finally able to boot it up I plugged phone on the charger and directly to the power outlet on the wall and hold the volume up + volume down + power bottom all 3 keys at same time for 20 minutes and released all key at the same and left phone on charger over night for 24hrs and phone was able to boot up
I think you only need to hold Vol Up + Power for a few seconds and it should reboot.
Mine did the same thing once and that's how I got it to restart.
gokun said:
I think you only need to hold Vol Up + Power for a few seconds and it should reboot.
Mine did the same thing once and that's how I got it to restart.
Click to expand...
Click to collapse
True. Power + Vol Up is a reboot, basically a simulated battery pull (for phones that have a removable battery.
Power + Vol Down boots into bootloader.
Power + Vol Up + Vol Down is not any button combo on this device, that I know of. This is perhaps a button combo for another device? Care should be taken to only do known button combos. Although I don't think there is any "harmful" button combo on the M8; on my old One X (EVITA) folks would mistakenly do Power + Vol Up to go into bootloader (correct combo is Power+ Vol down) which erased the ROM and sent the phone into Qualcomm download mode, which would probably give you a heart attack!
I'm having problem with my Zenfone 2, i"m from Philippines and I bought this in Taiwan. I left my phone at sleep then went to another room to do chores, when I come back, the phone won't wake anymore and opening using the power button also does nothing. Please help
Using the latest updates, 4GB Ram 2.3 ghz edition, I am not very good at these tech stuff so I'm really at a loss
i've basically done hold power button, plugging it to charger, trying power button + volume up (recovery mode) and none of these would boot the phone up
derictan said:
I'm having problem with my Zenfone 2, i"m from Philippines and I bought this in Taiwan. I left my phone at sleep then went to another room to do chores, when I come back, the phone won't wake anymore and opening using the power button also does nothing. Please help
Using the latest updates, 4GB Ram 2.3 ghz edition, I am not very good at these tech stuff so I'm really at a loss
i've basically done hold power button, plugging it to charger, trying power button + volume up (recovery mode) and none of these would boot the phone up
Click to expand...
Click to collapse
If it had charge before, just hold the power button until it vibrates. Even if it takes longer than usual.
If it had little charge or no charge, then use the usb cable and connect it to your PC. Wait see if it
turns on, if not, hold the power button as long as it takes till it vibrates!
derictan said:
I'm having problem with my Zenfone 2, i"m from Philippines and I bought this in Taiwan. I left my phone at sleep then went to another room to do chores, when I come back, the phone won't wake anymore and opening using the power button also does nothing. Please help
Using the latest updates, 4GB Ram 2.3 ghz edition, I am not very good at these tech stuff so I'm really at a loss
i've basically done hold power button, plugging it to charger, trying power button + volume up (recovery mode) and none of these would boot the phone up
Click to expand...
Click to collapse
i dont think its brick since you have not rooted yet...since your noob on tech justvlike me..i would not imagine youll tinker with not having proper knowledge...you might have no battery at all causing that. just press power untill it boot..just wait......
I have a V500 that won't boot, and doesn't appear to charge either. Here's what it will do:
1) When plugged into a mains charger, flash up the LG logo briefly. I don't need to press the power button for this to happen.
2) When plugged into a mains charger with both volume keys held down, boot into download mode.
If I plug it into a USB port it won't power on. It will briefly be detected by Windows but not as any useful device. I cannot get it into download mode when it's connected to a USB port, and if I do (2) then unplug it powers off.
My powered USB hub has an indicator light. With the tablet connected, whenever I press the power button this light comes on for a second or so. If I connect the USB cable whilst holding down both volume keys this light also comes on, but the tablet does not go to download mode.
I have already changed the main flex cable in case this was the problem.
Does anyone have any suggestions?
Try it with one of the USB plugs at the back of the computer.
I've got devices I can transfer files on and off via the hub built into my monitor but if I want to do anything lower level I have to use a USB port on the computer.
I have finally been able to sort this.
I'm not sure precisely what was wrong. I changed the internal USB flex cable and this made no difference.
Next I bought a switchable "data/charging" USB cable that was very useful in diagnosing circumstances where it would enter download mode.
After much messing around I found I could plug the device into a powered USB hub that wasn't connected to a laptop and enable download mode, then connecting the hub to the laptop it would stay in download mode and allowed me to reflash it back to stock so I knew the software was at least okay.
It still wouldn't do anything other than show the initial bootloader logo though, and this only when plugging in a cable. Pressing the power button did nothing.
Since it was still open, I disconnected the battery. Tried powering on with the cable connected, nothing. Left the cable connected, connected the battery - bing! We have life.
It's now bootlooping but it's playing animations and making sounds, so I'm hopeful I can factory reset the device. The power button works at least
madscout said:
Make sure your device is fully charged and turned off.
Simultaneously press and hold the power and volume down buttons.
When the LG logo shows up, release the power button only.
Now press and hold the power and volume up button while keeping your hold on the volume down button.
When the factory reset screen appears, release your hold on all buttons.
Press the power button to continue.
Press the power button again to confirm if you’re sure you wish to continue with the reset.
Click to expand...
Click to collapse
Great success! Device is working
Clarification, please
If you have a V500, explain how you can hold VOLUME button simultaneously in UP and DOWN position. It's just one rocker button, but you keep referring to it as 2 separate volume buttons. This goes for madscout quoted solution as well.
Mirek Goldberg said:
If you have a V500, explain how you can hold VOLUME button simultaneously in UP and DOWN position. It's just one rocker button, but you keep referring to it as 2 separate volume buttons. This goes for madscout quoted solution as well.
Click to expand...
Click to collapse
Using two fingers. It's one rocker but you can hold both buttons down at the same time.
bradavon said:
Using two fingers. It's one rocker but you can hold both buttons down at the same time.
Click to expand...
Click to collapse
I think we're not on the same page as far as my query goes. Forget the POWER button - it is not an issue. Because VOLUME button is a rocker it is impossible to hold down VOLUME UP and VOLUME DOWN positions simultaneously as madscout solution advises: "Now press and hold the power and volume up button while keeping your hold on the volume down button". Such trick is impossible even with 3 fingers, because the Volume rocker can be pressed and held either in Up or Down position. Madscout wants us to keep it pressed in both positions simultaneously, the crucial phrase being "while keeping your hold". Now, do you get my drift? And explain to me what madscout meant? Thanks!
My V500s allow the whole rocker to be pressed in at the same time. It's not a true rocker.
If you open the device up, you will see two independent buttons.
hordarian said:
My V500s allow the whole rocker to be pressed in at the same time. It's not a true rocker.
If you open the device up, you will see two independent buttons.
Click to expand...
Click to collapse
REALLY? That's a surprise. Thanx, bro. Sneaky LG put in fake rocker button.. Meaning, that madscout's solution requires 3 fingers - 1 for Power and 2 for Volume.
Or 1 finger only for Volume if it's pressed exactly in the middle. Crazy world.
Any help? Similar situation at my Gpad - usually after initial animation is powered off. If I make factory reset i can start device, i can adjust some setings, but in a few minutes it is switching off. V50020F and no root is there.