the security pin appears even after i install s2u2, so i slide to unlock then have to enter pin again, i've tried to change some settings, but no luck...
please, anyone?
Do you mean the original windows security pin? If you do then it should be in Start>Settings>Lock.
it doesn't work..it's greyed out
Did you get this figured out yet?
yes i did, thanks for asking. i read this: http://dotnetus.spaces.live.com/blog/cns!4E39ECD492E4EEC1!672.entry
judicious said:
yes i did, thanks for asking. i read this: http://dotnetus.spaces.live.com/blog/cns!4E39ECD492E4EEC1!672.entry
Click to expand...
Click to collapse
Now thats interesting
Related
Hi,
After flashing myriad of devices i am stuck with diamond's security unlocker.
I am at Bootloader screen which says
"PSOC-Diam STAGE_PVT v0*30
Upgrade ROM code error
Please try again"
Click to expand...
Click to collapse
Please suggest the next asap.
I've read in the unlocker screen that i have a problem radio of HTC Diamond i should downgrade, but i didin't to my bad. So please can you provide me the link of that downgrade.
Thankyou
try to download it from here: http://diaduit.trg.ru/RAD_Diamond_1.00.25.05.diamimg.zip
Dark_Phantom said:
try to download it from here: http://diaduit.trg.ru/RAD_Diamond_1.00.25.05.diamimg.zip
Click to expand...
Click to collapse
Thanks i have already downloaded and am out of this situation.
But after again running the security unlocker, i was presented with a screen on my device to "Security unlock" and i checked it and said ok on the device, and still i haven't security unlocked my device- cause it still not showing security unlocked on the bootloader screen.
Please suggest what i am doing wrong. Thanks
I don`t know, my diamond isn`t security unlocked... But when you figure it out, write a post please, because i`m going to SU my diamond in near future...
Dark_Phantom said:
I don`t know, my diamond isn`t security unlocked... But when you figure it out, write a post please, because i`m going to SU my diamond in near future...
Click to expand...
Click to collapse
ok i would. But someone guide me to it.
Ok can somebody please tell me when the gui runs on the phone and asks to "cid unlock"
"sim relock"
"Security unlock"
i check security unlock box and click OK. But still it doesn't unlock the security??
What i am doing worng???
And how do i know that my phone is security unlocked
Did you fix the radio downgrade? If not get it from the thread
http://forum.xda-developers.com/showthread.php?t=414835 and rerun the unlock proces (of course after your radio is fixed)
Yes i have downgraded my radio to 1.00.25.03
Pls answer this to me
Ok can somebody please tell me when the gui runs on the phone and asks to "cid unlock"
"sim relock"
"Security unlock"
i check security unlock box and click OK. But still it doesn't unlock the security??
Click to expand...
Click to collapse
ok finally completed the unlock process.
On the final screen on mobile, i had to click commit changes which i have missed earlier.
All thanks to Olipro and cmonex for creating such a simple foolproof software.
Thankyou.
Mods can close this thread.
I have activated unlock pattern for unlocking the screen on my SGS, now I want to go back to the original unlock mirror. How do I do that.
When I try to untick Require pattern in Location and security it goes to change unlock pattern, where I need to give a new pattern. I think there's a bug in my SGS.
Any help?
It asks you to confirm your current unlock pattern when you untick Require Pattern. Just put it in and it should be fine.
navmanyeah said:
It asks you to confirm your current unlock pattern when you untick Require Pattern. Just put it in and it should be fine.
Click to expand...
Click to collapse
I truly wish you had not answered this question. People are so dumb these days it pisses me off. Why is a question this dumb in the development area in the first place.
navmanyeah said:
It asks you to confirm your current unlock pattern when you untick Require Pattern. Just put it in and it should be fine.
Click to expand...
Click to collapse
Thanks.
Sorry for posting it here
Here is a video for my problem with the service code to unlock my s4 sgh-m919v can't enter to debugg menu ...
Please help
http://youtu.be/zqCybG30Qdo
What method are you trying to use?
serio22 said:
What method are you trying to use?
Click to expand...
Click to collapse
The 2 methods *#0011# y *#7......
I don't think that's the correct screen though, that is only supposed to show your current network info AFAIK. Are you trying to follow an unlock method here on XDA or trying to input an unlock code?
serio22 said:
I don't think that's the correct screen though, that is only supposed to show your current network info AFAIK. Are you trying to follow an unlock method here on XDA or trying to input an unlock code?
Click to expand...
Click to collapse
I try with the xda method
celtichazard said:
I try with the xda method
Click to expand...
Click to collapse
Can you link me to it?
serio22 said:
Can you link me to it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2283068
Read the steps again, you're typing the wrong input. And I believe that method only works on some 4.2.2 builds just to let you know. There are other threads to unlock in case you are on newer firmware
serio22 said:
Read the steps again, you're typing the wrong input. And I believe that method only works on some 4.2.2 builds just to let you know. There are other threads to unlock in case you are on newer firmware
Click to expand...
Click to collapse
I'm on 4.4.2
Try this thread http://forum.xda-developers.com/showthread.php?t=2780006
But instead of the M919 modem files, you may want to try using your own device's modem instead
Try this :
Instead of inputting no. 1, click Menu- "Back", then Menu - Key input letter Q then click ok, then Menu - Key input 0000.... that's four zeros... wait a few seconds... then the menu will apper
xdm9mm said:
Try this :
Instead of inputting no. 1, click Menu- "Back", then Menu - Key input letter Q then click ok, then Menu - Key input 0000.... that's four zeros... wait a few seconds... then the menu will apper
Click to expand...
Click to collapse
Greathe now I'm on a debug screen and network lock but I don't have the option number 3 only have the info shaft 1 now what's next with this..... When I enter O info return me to main screen
celtichazard said:
Greathe now I'm on a debug screen and network lock but I don't have the option number 3 only have the info shaft 1 now what's next with this..... When I enter O info return me to main screen
Click to expand...
Click to collapse
I think that was mentioned in the guide. Go to that thread and reread the instructions again or ask your question in that thread. Good luck
Hi,
My little brother have been lock down my phone, with password.
I tried to access to my bootloader by pressing power buttom + Volume up/down but nothing happend,
I search google and saw that sony block the bootloader, i tried to unlock this by Emma(sony Software),
However becuase my phone is lock by password it cant unlock my bootloder....
i helpless, any ideas ?
yuri1992 said:
Hi,
My little brother have been lock down my phone, with password.
I tried to access to my bootloader by pressing power buttom + Volume up/down but nothing happend,
I search google and saw that sony block the bootloader, i tried to unlock this by Emma(sony Software),
However becuase my phone is lock by password it cant unlock my bootloder....
i helpless, any ideas ?
Click to expand...
Click to collapse
so what is your problem now? you can't recover your phone password or you can't unlock bootloader?
Nicklas Van Dam said:
so what is your problem now? you can't recover your phone password or you can't unlock bootloader?
Click to expand...
Click to collapse
sorry,
or to bypass the password screen,
or to enable bootloader to make hard reset
yuri1992 said:
sorry,
or to bypass the password screen,
or to enable bootloader to make hard reset
Click to expand...
Click to collapse
yaa so what you what you want it now? to bypass password or unlock bootloader?
Nicklas Van Dam said:
yaa so what you what you want it now? to bypass password or unlock bootloader?
Click to expand...
Click to collapse
bypass
yuri1992 said:
bypass
Click to expand...
Click to collapse
bypass ya hmmm? have you try to format your data? with flashtool? if you don't want thath way i will search another way?
Hi thanks to the wonderful Devs im bootloader unlocked.
I need to access Service codes for diag for fingerprint scanner and a couple of other bits to test.
How can I access them, they are still locked out. Do I need to edit a system file to unlock this feature that Verizon locked out.
Thanks
gersrt said:
Hi thanks to the wonderful Devs im bootloader unlocked.
I need to access Service codes for diag for fingerprint scanner and a couple of other bits to test.
How can I access them, they are still locked out. Do I need to edit a system file to unlock this feature that Verizon locked out.
Thanks
Click to expand...
Click to collapse
Change this file:
Code:
/efs/Carrier/HiddenMenu
from OFF to ON
Thanks Mate that worked fine.
Sorry to revive this thread but once we set the HiddenMenu to ON what is the correct code to get into the hidden menu?
mlcampbe said:
Sorry to revive this thread but once we set the HiddenMenu to ON what is the correct code to get into the hidden menu?
Click to expand...
Click to collapse
try thi code *#0*#
Yep, that did it thanks.