Related
Hello there.
I'm a newbie to using A2DP/AVRCP, sorry about that, but I have big issues.
I have huge lag when trying it out.
Specs:
HTC Universal
Midget's WM6 (Crossbow)
Radio 1.14
Bootloader 1.01?
Sony DR-BT20NX (really nice ones).
Anyways. I pair it up, no problemo at all. Tried a few calls. Works fine. Selected both handsfree and wireless stereo from profiles ofcourse.
So, I tried playing a movie in TCPMP. Audio and Video stutters every second. Tried playing a MP3 file in Media Player. Audio lag every second.
DAMN!
So, I went in to all these threads about A2DP/AVRCP in the forum (read them before) and checked out fixes etc. Everything seems to already be applied in this ROM. Priority256 value exists (in another folder though as described for another device, HKLM/BuiltIn/Drivers/WavDev I think)
What the heck can I do? I'm not comfortable applying different patches because I think A2DP support in every manner is already applied, so as the registry values.
HELP ME!!
Following the development/information on MS BT Stack change to Widcomm BT Stack on following links
http://forum.xda-developers.com/showthread.php?t=279236
http://forum.xda-developers.com/showthread.php?t=285419
http://forum.xda-developers.com/showthread.php?t=285696
http://forum.xda-developers.com/showthread.php?p=1073003
Any one know more?
Just a thought. Is it possible to deactivate SBC (recoding/decoding) of MP3's?? My Sonys support direct MP3 streaming.
http://forum.xda-developers.com/showthread.php?t=285419&page=20
Tried out BT Stack change for Hermes patch/program.
TEST RESULTS ON UNIVERSAL WITH WM6 (Midget aka Helmi unreleased)
Sound IS great. But other than that, this program does not work very well on my device. Of course this is designed for Hermes but I gave it a shot.
Issues:
1:
Screen flickers (only when this BT is turned on).
Flickers really bad and unable to use device.
Fix: set the device to standby (power button) and wake it up again. Flickering gone
2:
Once BT is deactivated for a few minutes I can't start it again.
Fix: No fix found yet. Only a Soft-reset and directly activate BT works.
3:
I can't use my GSM/UMTS connection anymore. Trying endlessly. Even after soft-reset's I can't connect. WiFi works fine though.
Fix: No fix found yet.
4:
Unable to uninstall this program. Tried several times. I get to the "Soft Reset Device Yes/Cancel". I soft reset, program still there and working.
5:
Hard-Reset, complete setup with WAP, MMS, MAIL etc.
Installed Widcomm BT Stack again.
Soft-reset:
Screen flickering (fix)
No 3G/UMTS connection avalible anymore. Even when BT stack is completly shut down.
We need a specific one for our Universal. Who's up to fixing this for us?
KEEPING this post updated.
EDIT 06: 18:40 @ 21/01/07
ANYONE into programming/developing interested in taking this as a sideproject so all of us Universal users can benefit from this great software?
PS. No, Nuclear (aka Infidel)! Pleace do not participate in other than testing. And if you do, please don't be too exited and write lies/bs in this thread. Thank you. Ta ta
I'm currently using Midget's WM6 with a set of Motorola HT820 bluetooth headphones without any problems.
In fact I've tried a couple of WM6 roms now and both have had working a2dp & avrcp and if anything quality is as good as the AKU3.3 I was previously running.
AVRCP & connecting up seems to be a little more reliable than the last rom as that would occasionally lose the pause control, something I don't think has happened on WM6 yet.
It might be worth trying your device with a different set of bt headphones to see if the problem persists.
Taz69 said:
I'm currently using Midget's WM6 with a set of Motorola HT820 bluetooth headphones without any problems.
In fact I've tried a couple of WM6 roms now and both have had working a2dp & avrcp and if anything quality is as good as the AKU3.3 I was previously running.
AVRCP & connecting up seems to be a little more reliable than the last rom as that would occasionally lose the pause control, something I don't think has happened on WM6 yet.
It might be worth trying your device with a different set of bt headphones to see if the problem persists.
Click to expand...
Click to collapse
Hmm. Headphones shouldn't matter, should it?? It's one thing if the sound in my headphones is bad, but it is the DEVICE that has problems actually outputting to the recoder fast enough. It works fine with the Widcomm!!
Taz69 said:
I'm currently using Midget's WM6 with a set of Motorola HT820 bluetooth headphones without any problems.
Click to expand...
Click to collapse
Did you need to do any extra tweaking on Midgets ROM to get them to work properly?
edeplano said:
Did you need to do any extra tweaking on Midgets ROM to get them to work properly?
Click to expand...
Click to collapse
i've hs-12W. I'm using it with midget's first vanilla crosbbow rom without any problems. without any tweaking.
I have tried the broadcomm stack on WM6 but couldn't get my jabra bt620s stereo phones to connect to both the headset AND stereo profile at the same time - if I connected it to the stereo profile, then it sounded great, with no log, but wouldn't act as a headset. If I connect it as a headset, it works fine, but all audio is mono, even stuff that shouldn't be. Should I be able to get this working for both at the same time?
Worked straight away without needing any tweaking.
Both stereo & phone headset work okay.
Also had Stereo configured with Universal and Phone paired with a hermes since getting a second data SIM and that setup is working okay as well.
Taz69 said:
Worked straight away without needing any tweaking.
Both stereo & phone headset work okay.
Also had Stereo configured with Universal and Phone paired with a hermes since getting a second data SIM and that setup is working okay as well.
Click to expand...
Click to collapse
Thanks Taz!
Is it true that this headset can store two pairing profiles (ie I can have them paired with my Qtek and my PC)?
Well, being that this is my first post, I would first like to say that this site and forums are top notch, I have had my 8525 for about a month now and have learned an immense amount of knowledge in a short amount of time thanks to you guys. Now for my problem...
I have my 8525 running Black Magik, radio 1.43.00 and have recently purchased a pair of Sony DR-BT21G A2DP stereo headphones. Now I was a bit weary about buying these since I have seen no mention of them on these forums... buy anyways. When I first paired the devices together I was able to listen to music without problem, though sound needed to be tweaked. After trolling for quite some time through the forums (yes, the search feature works great) I found what appeared to be the best A2DP setting for audio quality, and now after playing with every possibility cannot get music routed to the headset, phone calls work without a hitch. I have downloaded BTAudio to route all system sounds to the headset but It doesn't seem to work. I toggle BTAudio on and I can hear slight static through the phones but the audio still comes out through the system speaker. I have played with A2DP settings in both pimp my black and HTweakC but have not had any success. I am planning on reflashing Majik tonight to attempt to set it up from scratch, but I was wondering if anyone here could shed some light on this issue? Thanks in advance.
Freeguyad said:
I have my 8525 running Black Magik ... A2DP stereo ... was able to listen to music without problem ... cannot get music routed to the headset ...
Click to expand...
Click to collapse
Delete the pairing. SR. Re-pair. Should do hte trick. Better yet - for the most stable ROM and A2DP tweaked for the best sound "out of the box" - reflash with Sleuth255 variant of LVSW ROM.
How exactly can I delete the pair? I can repair the device but have not seen an option to remove it?
To toggle Audio to A2DP you might want to see:
http://forum.xda-developers.com/showthread.php?p=1485391#post1485391
There's a description and a link to download the CAB for A2DPToggle plugin too.
Let me know how it works on your hardware.
I recently purchased a pair of Iogear wireless Bluetooth headphones to use with my Fuze. I went through the process of pairing them, and managed to get them to connect. But when I tried to use them with listening to music or making a call, they would not work.
Anyone else have a problem or a clue as to why they won't work?
The phone supports both A2DP and AVRCP.
Hope this is in the correct section.
I'm unsure on why it won't work. I have some Plantronics Pulsar 590A and they are top notch. I use it with my 8525 (Hermes) and the sound quality is great. Also, Plantronics does a great job on their warranty.
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
hotrod101 said:
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
Click to expand...
Click to collapse
You know this happens with me with Core Player. I have to set up the A2DP before I start a movie or song in the program or else it won't work.
Instead of doing a soft reset I just turn bluetooth off and then back on. That usually solves the problem of the mystery disconnect.
hotrod101 said:
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
Click to expand...
Click to collapse
Yeah, that was one of the first things I had done before even trying to use them. I checked the settings. But still to no avail. Even tried soft resetting.
It worked instantly with my Tilt though. But I bought them to use with the Fuze lol.
addicus said:
You know this happens with me with Core Player. I have to set up the A2DP before I start a movie or song in the program or else it won't work.
Instead of doing a soft reset I just turn bluetooth off and then back on. That usually solves the problem of the mystery disconnect.
Click to expand...
Click to collapse
Yes I do this to for this particular problem. The soft reset required problem is something different - Not sure yet what causes it - I think that it is an app that I run every now and then that causes some kind of conflict even after it has been shut down. Still have to figure it out
mzshortay said:
Yeah, that was one of the first things I had done before even trying to use them. I checked the settings. But still to no avail. Even tried soft resetting.
It worked instantly with my Tilt though. But I bought them to use with the Fuze lol.
Click to expand...
Click to collapse
Have you been successful in connecting other bluetooth headsets to your device which worked?
hotrod101 said:
Have you been successful in connecting other bluetooth headsets to your device which worked?
Click to expand...
Click to collapse
Oh yeah. My bluetooth headset, Plantronics umm forgot the number works with the Fuze. This is a mystery to me
Have you tried your new bluetooth headphones with different media players such as S2P or Mortplayer, TCPMP, Core Player, WM Player, HTC audio Manager should all support but perhaps what you are using does not. I don't have a Fuze so don't know how the built in audio manager media player works but have seen several posts with people having problems. Try another media player 3rd party such as S2P, Mortplayer, TCPMP (all free) or Core Player (not free)
hotrod101 said:
Have you tried your new bluetooth headphones with different media players such as S2P or Mortplayer, TCPMP, Core Player, WM Player, HTC audio Manager should all support but perhaps what you are using does not. I don't have a Fuze so don't know how the built in audio manager media player works but have seen several posts with people having problems. Try another media player 3rd party such as S2P, Mortplayer, TCPMP (all free) or Core Player (not free)
Click to expand...
Click to collapse
Okay, I'll do that, but it doesn't even work with using them to make a call.
There's a built-in mic on them, so it should work with that as well. It says it's connected, but the lil headphone icon never shows up when I turn them on.
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
hotrod101 said:
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
Click to expand...
Click to collapse
If this doesn't work you may wanna RMA yours and get a new pair. If that doesn't work, then you may wanna step up to a more expensive pair.
hotrod101 said:
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
Click to expand...
Click to collapse
Yeah, those are the ones I have.
And it does support both of those.
Maybe I'll do what addicus said and send them back.
I was really hoping these would work too! Darn.
-------------
After trying them again, when I tried to make a call, I heard it make a sound as if it was turning off, and still did not work properly.
I'll be returning these most likely.
mzshortay said:
Yeah, those are the ones I have.
And it does support both of those.
Maybe I'll do what addicus said and send them back.
I was really hoping these would work too! Darn.
-------------
After trying them again, when I tried to make a call, I heard it make a sound as if it was turning off, and still did not work properly.
I'll be returning these most likely.
Click to expand...
Click to collapse
Damn you shortay! Since I wrote in this thread my Plantronics have been tripping when I make a phone call and not syncing up. I figured it out. It's that new Yota dialer I put in the other day. Sometimes I can't use the bluetooth on a phone call unless the A2DP is hooked up. Weird.
addicus said:
Damn you shortay! Since I wrote in this thread my Plantronics have been tripping when I make a phone call and not syncing up. I figured it out. It's that new Yota dialer I put in the other day. Sometimes I can't use the bluetooth on a phone call unless the A2DP is hooked up. Weird.
Click to expand...
Click to collapse
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
mzshortay said:
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
Click to expand...
Click to collapse
Cool beans shortay! Stay around XDA Dev.
mzshortay said:
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
Click to expand...
Click to collapse
Glad they are working now for you.
okay, so I may need you guy's advice. It seems as though they only work once and then i have to delete them from the phone, then discover them again. Could it be a defect in the particular headphones I have, or the model not working with my Fuze? Maybe I should RMA these anyway?
Maybe you should head on into the shop you purchased your Fuze and describe the problem to them. Perhaps they will allow you to connect various different bluetooth headphones (that they have at the shop) to your device to see if it is a problem with your device or with your headphones.
hotrod101 said:
Maybe you should head on into the shop you purchased your Fuze and describe the problem to them. Perhaps they will allow you to connect various different bluetooth headphones (that they have at the shop) to your device to see if it is a problem with your device or with your headphones.
Click to expand...
Click to collapse
This is a great idea! If you find out the problem is with the headset - RMA them. If not, dig deep in that Fuze forum and see if you guys can figure out a fix.
I have been using the Touch Pro 2 for a little while now, and I must say: no regret at all that I've bought it.
But the reason I post here is because I'm having a problem with my car-kit and the Touch Pro 2 when they are connected through bluetooth.
First of all, some data about the car-kit
Car stereo: JVC KD-BT22
Bluetooth functions: handsfree calling and Bluetooth Audio Streaming
Bluetooth version: 1.2 certified
Profile: HFP 1.5, OPP 1.1, A2DP 1.2, AVRCP 1.3
The situation:
When I pair the devices I can check two options:
1) Handsfree
2) Stereo Audio
This should be fine, but the problem comes next:
- When I both check handsfree and stereo audio, I don't get any streaming audio (I just hear about one second the song which is playing at the phone), if I call or get called nothing hapenned except the display of the phone showing the caller. The car-kit just keeps playing (for example) the CD.
- When I uncheck the stereo audio, just connecting the handsfree everything works "fine" (some small problems, not mentionable).
- When I only connect stereo audio the same happens as described before: the song which is playing at the phone I hear about one second, and after that it's silenced (the song is still "going forward", but no sound, nor on the phone, nor on the car stereo).
I've tried different set-ups, searched the forums and didn't saw anyone with this problem/no sollution, so I hope someone could help me.
This happened with the Stock Rom and also the custom rom I'm using right now, no difference. When I connect a stereo headphone (from Nokia) through Bluetooh, everything works fine.
don't pair from the phone use your Radio to pair...i had the same problem with my Pioneer at first so i searched for the device from my stereo and it worked just fine and ...i hope this helps... and make sure your discovery is always on...take care!
Well, that in a case makes sense...
The carkit also connected to my phone when discovery was turn off. Seemed strange to me already. A little, maybe stupid, question: what do I need to swith off/turn off on the phone so the phone won't connect to the carkit, but that I have to let the carkit connect to the phone?
HTC aware
I have similar problems with the BT stack in the TP2, which is disappointing having migrated from a Snap. I e-mailed HTC who admit they are aware of BT problems with the TP2 and advised me to keep an eye on the support page for a fix.
apv245l said:
I have similar problems with the BT stack in the TP2, which is disappointing having migrated from a Snap. I e-mailed HTC who admit they are aware of BT problems with the TP2 and advised me to keep an eye on the support page for a fix.
Click to expand...
Click to collapse
I also tried mailing HTC about this problem. The reply wasn't so hopegiving
"We're sorry, but the carkit isn't compatible. Please fill out the form for our technical support team"... Summary: I've not been too lucky with this combination
Hope they might do something about it after all. Me just thinking that Bluetooth = Bluetooth, but it's more complicated than that.
I also have the same problem with JVC-KD-AVX2 streaming audio. couple of times i did manage to get it to work, but once the stereo is turned off and on, i lose the streaming again.
i called HTC and emailed them. one said my stereo is not compatible, but i did have it working kind of.
not sure what the problem is as the touch pro1 worked fine. also my friends N97 worked fine
did all of you use your stereo to search for your phone or your phone to search for your stereo... if u used your phone then try using the stereo to to look for your phone under the connections menu and it should work
nemo0405 said:
did all of you use your stereo to search for your phone or your phone to search for your stereo... if u used your phone then try using the stereo to to look for your phone under the connections menu and it should work
Click to expand...
Click to collapse
Sorry for my late reply.
I can't connect/pair the phone using the stereo, to bad.
Well, I have the Pioneer Stereo and what I discovered was you have to do it from the stereo. For some unknown reason it errors out from phone. Since that, I have no problems, further more it reads my text as well as incoming e-mails. Hope that help
DownNeverOut said:
Well, I have the Pioneer Stereo and what I discovered was you have to do it from the stereo. For some unknown reason it errors out from phone. Since that, I have no problems, further more it reads my text as well as incoming e-mails. Hope that help
Click to expand...
Click to collapse
Which Pioneer are you using? I'm using the F700, and for some reason it won't mute the radio when in a call. I haven't gotten time to mess around with it much though. Reading incoming texts would be great.
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.
nemo0405 said:
don't pair from the phone use your Radio to pair...i had the same problem with my Pioneer at first so i searched for the device from my stereo and it worked just fine and ...i hope this helps... and make sure your discovery is always on...take care!
Click to expand...
Click to collapse
x2, exact same problem with MY pioneer on 6.1 ... took me an hour to figure out how to pair it correctly, and it happened completely by accident out of frustration while I was pounding my fists into the horn haha. Now I know better...
set your phone to discoverable, then pair from the radio, confirm on the phone. good luck - Mark
qaliza said:
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.
Click to expand...
Click to collapse
The only thing I can think of is that maybe you have different ringtones set up for contacts and unknown contacts. Or your carkit is broken.
Hope this helps - Mark
qaliza said:
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.
Click to expand...
Click to collapse
RADRaze2KX said:
x2, exact same problem with MY pioneer on 6.1 ... took me an hour to figure out how to pair it correctly, and it happened completely by accident out of frustration while I was pounding my fists into the horn haha. Now I know better...
set your phone to discoverable, then pair from the radio, confirm on the phone. good luck - Mark
Click to expand...
Click to collapse
Try the cab from this thread ------> Fix for playing ringtones over bluetooth headset.
It's meant so that the actual ringtone you have set will play on the car kit. I know my car kit used to have its own ring which was... boring to say the least. Now the various ring tones set to people on my phone play through the car kit. Anyway... This MIGHT fix the issue you guys are having as well.
RADRaze2KX said:
The only thing I can think of is that maybe you have different ringtones set up for contacts and unknown contacts. Or your carkit is broken.
Hope this helps - Mark
Click to expand...
Click to collapse
Yes i do have diifferent ringtones for contacts and also different pictures. The problem is in the contacts name. When i remove the name and leave it unnamed it works fine.
Thanks for your reply..
Aaron McCarthy said:
Try the cab from this thread ------> Fix for playing ringtones over bluetooth headset.
It's meant so that the actual ringtone you have set will play on the car kit. I know my car kit used to have its own ring which was... boring to say the least. Now the various ring tones set to people on my phone play through the car kit. Anyway... This MIGHT fix the issue you guys are having as well.
Click to expand...
Click to collapse
it did not fix my problem but thanks anyway. The problem im facing is that any contact saved with a name wont be recieved on the car kit. while if its left unnamed it will work fine.
Yesterdaty I updated to WM6.5 and now try to get everything working again. Somehow my TP2 won't pair with my bluetooth carkit anymore. With WM6.1 this was no problem. The phone still pairs perfectly with my computer (also bluetooth connection) so I think the bluetooth connection is ok.
When parining to my carkit it finds the device, then I have to enter a password on the TP2, and after that it just sais "pairing connection failed", and it will not work. I am sure the password is not changed since yesterday. I tried it several times. I do not know what to do anymore. Could this be a setting somewhere? I get the feeling my password is not send properly but have no idea.
Meanwhile I tried pairing my carkit with another phone and no problems there. So my conclusion is: something has changed with bluetooth, updating to WM6.5 which makes it now impossible to pair my TP2 with my carkit.
Is there maybe a programm for the TP2 which give me more controll over bluetooth (like maybe go to an older standard)?
I have exactly the same problem as you
good to hear I am not the only one. Hope someone will come up with a solution for this.
I did nor observed any issues when pairing my TP2 after reflashing to WM6.5
There is another issue however - I can not hear any voice until it is charging.
Unplugging of the charger fixes this issue immediately. Horrible...
Seems, HTC guys are saving money on testing by using us as Beta Customers.
Would a custom ROM be a solution for us?
I updated to the "energy 6.5.1 rom" and guess what..............
The same problem. The rom is very nice, but my TP2 still won't pair with my BT carkit which is very big problem for me.
Is there maybe a way to downgrade just the BT part of a rom to WM6.1. I read on different forums there is something that is called a BT stack. Could this be the problem?
I have a ton of problems with bluetooth pairing now. However, I don't know whether it's the fault of 6.5 or the Tilt 2. Here is what I am experiencing...
- On car deck or headphones, the skip buttons don't do anything
- on car deck or headphones, I have to disconnect Stereo Audio and then reconnect to actually get sound. It NEVER works when it auto connects.
- Music will do a brief skip when you shut the screen off
- Stupid message about volume control every time it connects (resolved by switching to custom rom)
- SMS or any kind of alert tone now turns music way down so that the tone is the only thing you hear. Which is super awesome when I'm driving my drunk friends around and they are singing along to a song when suddenly it mutes so everyone can hear my incoming text message.
Not a single one of these issues existed when I had my Fuze.
Same here
My bt headset (sony hbh ds970) and simply does not find the pairing...
I asume is a problem related to energy´s ROM
orb3000 said:
Same here
My bt headset (sony hbh ds970) and simply does not find the pairing...
I asume is a problem related to energy´s ROM
Click to expand...
Click to collapse
No I do not think so, because I used the official WM6.5 with the same problem. Does someone know a way around this issue. I strongly believe that if only I could pair I have some options to work with it (in 6.1 it worked like a charm). If I only could pair without having to send the passkey it would be great step forward. I presume with sending the passkey, the bluetooth of the TP2 sends out other "rubbish" that confuses my carkit.
My problem is solved and guess what, it had nothing to do with my TP2. The problem was my carkit. It has a maximum number of bluetooth devices (5) it can pair to and the last one (the WM6.1 version of my phone) had been reached. So a hard reset on the bluetooth carkit and the problem was solved.
Well, at least I now know how to flash a rom to my phone and I think I learned more about the phone reading through all the forums. Thanks all for thinking with me on this problem!
Does anyone else still have this problem?? I have removed all the devices from my car and continue to have the same pairing error just after entering the passcode. Stock Spint ROM worked great, but multiple 6.5 upgrades don"t pair..............suggestions/ideas??????
bluetooth settings, advanced, enable beam data exchange,check the box
Interesting.....I actually found a fix. Instead of pairing the phone with the car, I paired the car with the phone. I didn't even know that this was possible, but it did the trick!