Related
It is from an HP 6315 from 3/31/05
http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/download/22539.html
I would love to see if we could get this stack and the settings on our XDAII and other HTC devices,,, THAT would be cool.
Bluetooth build 1.0.0.3701:
Corrects inaccurate display of headset icon when a call is in progress.
Adds a check to determine if Bluetooth stack is initialized before accepting messages from phone.
Adds a user interface (UI) change to enable a connected headset to automatically disconnect before attempting to connect to a different headset when the user chooses to connect to a second headset.
Corrects check for invalid device name.
Corrects issue where handheld could not reconnect to remote device after a page timeout.
Corrects Object push profile update so it sends all files.
Updates FTP connection wizard to correct service discovery issue.
Corrects issue with call waiting for incoming call handling while dialing out.
Corrects issue with headset connection icon so it is correctly displayed after power cycling.
Corrects audio to make it compatible with an in-car solution.
Corrects audio issue where the right channel for a headset was unavailable for playing audio and during calls.
Corrects issue where the LED and network status were not properly synchronized.
Corrects issue where the user could not send multimedia messaging (MMS) message.
Hmmmm....a few remarks, correct me if I am wrong:
1. There is already a BT version 1.0.0.3900 available
2. This is not a HTC device, so I doubt the tools developed here will work on it.
HappyGoat said:
2. This is not a HTC device, so I doubt the tools developed here will work on it.
Click to expand...
Click to collapse
This is an HTC device. All HPs are designed by HTC.
Well, even though I don't want to stop progress because I would like to have the ROM taken apart for my own personal reasons, the 6315 was actually made by Compal. Bad move on the part of HP in my opinion. However, the bluetooth stack that was taken from an iMate JAM worked on the 6315 and that is how most survived until the update was released. So it very well could work on the HTC's. On a side note, if someone could point me in the right direction, I will take the ROM apart, just don't know where to start.
mamaich said:
HappyGoat said:
2. This is not a HTC device, so I doubt the tools developed here will work on it.
Click to expand...
Click to collapse
This is an HTC device. All HPs are designed by HTC.
Click to expand...
Click to collapse
Oops....my bad....excuses!
no htc dont make ALL hp's pda's the H5400's was oem'd from LG
and even if the ipaq in question is made by HTC then that dont garentee that the xda tools work as they are not made by HTC
I can tell you now that the XDA tools do not work on that ROM as it stands. However, looking through the HEX, it is laid out a little differently than the XDA ROM's but have some of the same portions, just in different locations. Now if I knew more about what I was looking at, I could take it apart for you. The 6315 uses Widcomm BT and like I stated before the BT drivers ripped from a JAM worked great on the 6315 so I have a feeling the 6315 drivers will work on the XDA's.
I can also tell anyone looking at it that in the first header of the ROM the letters are shifted 13 characters. So when you see RAT it equals ENG and so on. It looks like they don't do that for very long though.
BT
HappyGoat said:
Hmmmm....a few remarks, correct me if I am wrong:
1. There is already a BT version 1.0.0.3900 available
Click to expand...
Click to collapse
BT 3900 and 3500 do not support Hands Free Profile or even Headset Profile on my XDAII.. This is important so people can use Caller ID on a BT device and OR a Car Kit with the Hands Free Profile....
Switching stacks is a pain in the but...
Even so, the only OS that even slightly works with Hands Free on the Himalaya, is 2.20 translated but even that has bugs that makes it very frustrating. The 2005 did have a fully functional BT, even having separate serial ports for each BT device, (like GPS), but the other bugs and the limited memory left over from the useless and unerasable Extended ROM from the other OS made it no good..
With this new ROM, I may be tempted to buy the HP again.. When I first bought one, it was DAM slow and the BT SUCKED!!!
Maybe now it is usable.
I love my Himalaya and it's 128 of built in..
http://www.expansys.com/product.asp?code=PDA2&asource=IMATE
http://www.expansys-usa.com/product.asp?code=PDA2&asource=IMATE
I will just have to keep waiting for one of the above unless someone finds a fix for the BT Hands Free.
When I get in the car and turn on bluetooth, a script starts to run in conjuction with my car stereo for handsfree and audio etc.
I would like to add a command to the script that switches on GPS straight away and gets a fix in the background so that if I get lost or stuck in traffic I can run TomTom and the fix will have already been established thus enabling me to navigate to where I need to be more efficiently?
Is there such a way of doing this?
the simplest idea I have is to run a 3rd party app such as gpsgate when your script runs.
debully,
I did think about using a 3rd party app but wondered if the trinity is capable of getting a fix just by enabling GPS and not running any other app?
The problem is that using A2DP is quite CPU greedy. Running another app will just add to it. Incidently, I've read posts where people are quoting percentages of CPU used by certain programs, how is this done?
interested as well
Let me know if you get a way to do this... I would be interested as well.
;-)
-Daniel
If you'd like to have a GPS fix all the time (even when you push the power button for 'stand by') you will have to modify the radio rom..
But for in-windows usage you could install a program with a virtual COM port that redirects the GPS data.. (so, when your batch file is ran this program will open and connect to the GPS port.. it wil create another COM port and when tomtom connects it will have a fix instantly)
I use gpsgate, not only does it give me a fix all the time when I set it to run on softreset, it can send your position to googlemaps so people can track you if you want and other nifty stuff.
Floriz said:
If you'd like to have a GPS fix all the time (even when you push the power button for 'stand by') you will have to modify the radio rom..
But for in-windows usage you could install a program with a virtual COM port that redirects the GPS data.. (so, when your batch file is ran this program will open and connect to the GPS port.. it wil create another COM port and when tomtom connects it will have a fix instantly)
Click to expand...
Click to collapse
I downloaded a little app called ODGPS (900KB cab file and free) It took a while playing around with the settings to get a fix but once the fix was there I opened TomTom and it knew where I was almost instantly.
I stumbled across a website yesterday with links to other sites of free gps software. http://www.maps-gps-info.com/fgpfw.html (where I found ODGPS)
My plan is to test a number of programs from here to establish a) how much memory they use and b) how quick they get a fix.
Once I have found a small enough app with a fairly quick fix I shall implement it into my script. Now if someone could just tell me how I monitor the CPU usuage of each app?
mcq3000
How memory hungry is gpsgate?
neomagik said:
I downloaded a little app called ODGPS (900KB cab file and free) It took a while playing around with the settings to get a fix but once the fix was there I opened TomTom and it knew where I was almost instantly.
I stumbled across a website yesterday with links to other sites of free gps software. http://www.maps-gps-info.com/fgpfw.html (where I found ODGPS)
My plan is to test a number of programs from here to establish a) how much memory they use and b) how quick they get a fix.
Once I have found a small enough app with a fairly quick fix I shall implement it into my script. Now if someone could just tell me how I monitor the CPU usuage of each app?
Click to expand...
Click to collapse
you can use "BatteryStatus", very small today-plugin that shows you the energiedrain... more cpu = more energiedrain
I'm getting closer to having this working:-
ODGPS is not ideal because it seems to freeze the phone after a while. It also makes a funny tapping noise every 2 or 3 minutes and for some reason and I can't disable it.
I'm now experimenting with NoniGPSPlot, a very small program that runs easily in the background. You can save a track of your journey too and view it on google earth.
Once it's established a fix, TomTom will fix almost instantly.
I've integrated it into my script so that it opens and minimizes as soon as I switch to 'car' profile. My phone then detects my stereo and connects to it for handsfree profile, then for wireless stereo.
What would be cool is if I can get it to display a message telling me that a fix has been established and likewise when the fix is lost. The trouble is I can't find what registry change takes place once it has a fix.
neomagik said:
I'm getting closer to having this working:-
ODGPS is not ideal because it seems to freeze the phone after a while. It also makes a funny tapping noise every 2 or 3 minutes and for some reason and I can't disable it.
I'm now experimenting with NoniGPSPlot, a very small program that runs easily in the background. You can save a track of your journey too and view it on google earth.
Once it's established a fix, TomTom will fix almost instantly.
I've integrated it into my script so that it opens and minimizes as soon as I switch to 'car' profile. My phone then detects my stereo and connects to it for handsfree profile, then for wireless stereo.
What would be cool is if I can get it to display a message telling me that a fix has been established and likewise when the fix is lost. The trouble is I can't find what registry change takes place once it has a fix.
Click to expand...
Click to collapse
Wow this sounds great !!! I have just bought an A2DP capable car radio and I would love to being able to do exactly this. Can you share your script when its finished??
Kind regards
neomagik said:
I've read posts where people are quoting percentages of CPU used by certain programs, how is this done?
Click to expand...
Click to collapse
Task Manager
availible here: http://www.buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,27,15027
@ rdkay>
Which stereo do you have? The script I have written is specifically for the Pioneer DEH P75BT
I've just used ssnap to create 2 snapshots of my registry, the 1st with a gps fix, and the 2nd without. When comparing the files using ExamDiff there is no obvious change that takes place.
Does anybody know of a GPS program that creates or changes registry entries once a fix is established?
neomagik said:
@ rdkay>
Which stereo do you have? The script I have written is specifically for the Pioneer DEH P75BT
Click to expand...
Click to collapse
slightly off topic - apologies -
how do you find the DEHP75BT at registering and automatically recognising your phone?
I have a DEHP55BT (think it was the first BT radio available for under £200) and had loads of trouble with registration (had to use 'connect
wait') and unless I manually switch on BT on phone (mUn's WM6 SE) or manually tell the pioneer to connect nothing happens.
Also, when callers call me I cannot hear their voices through the speakers, but it's ok when I call them - do you have this problem?
neomagik said:
I've just used ssnap to create 2 snapshots of my registry, the 1st with a gps fix, and the 2nd without. When comparing the files using ExamDiff there is no obvious change that takes place.
Does anybody know of a GPS program that creates or changes registry entries once a fix is established?
Click to expand...
Click to collapse
GPSGate changes the colour of its icon that resides in the system tray (red -no gps data, yellow - gps data but no fix, Green - Fixed). Not sure if this is controlled by a registry setting but may be worth a look. GPSGate also lets you use more than one GPS app at once and allows you to delegate COM ports for output.
@ debully>
There is a very simple fix to enable the Pioneer to recognise and connect to your phone. You see the Pioneer is searching for a phone or a Smartphone, the Trinity identifies itself as a PPC and so the Pioneer ignores it.
The Class of Device or CoD must be changed so that the Trinity identifies itself as either a phone or Smartphone.
If you change the Dword Data value in.... HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD"
to 5374476 (decimal) and set bluetooth to discoverable in your Trin, you should find that it connects automatically.
It took me 8 months to find this out.
PS. I don't have the problem with not hearing the callers.
@neomagic
wow - thanks dude. Your a star!
To understand what you are dealing with in getting a "fix" you need to understand how the system works. When started for the first time in 2 hours (or whatever it's been programmed for) the gps does a cold start and needs to download almanac data from the sat's in order to determine their trajectories which is needed to calculate a fix. Once that data has been pulled, it's valid for a certain amount of time (about 2 hours if I'm remembering correctly). So, although no registry keys are going to change, the easy way to deal with this is to keep your own timestamp, and make sure to ping the gps with a fix request every 2 hours or so in order to keep it ready for a warm/quick start...
@ Shadowmite>
Thanks for the info, I've read similar information about cold/warm starts. A couple of questions though...
1) I can deal with the timestamp but how do I "ping" the gps with a fix request?
2) If I do ping a request every 2 hours and I'm indoors and can't get a fix, will it go back to needing a cold start?
Ok so it seems to be a pretty universal feeling that the bt does not work well on the Hermes. I personally am having trouble with filesharing.
So i searched (forum and google) and found different threads for different bt stacks, but I want to know what is a solid, stable, well-working one I can put on my phone?
I was under the impression that the BT stacks were pretty well intertwined with the ROM making them all but impossible to mix and match. But then I haven't really tried myself, so don't let me rain on your parade.
If anyone would know the answer to this question, it would be Sleuth. He is best man for tweaking BT that I know of. BTW, I haven't had any trouble BT filesharing (assuming you mean objectpush?) with SuperD-Lite. What are you trying to share with?
larsuck said:
I was under the impression that the BT stacks were pretty well intertwined with the ROM making them all but impossible to mix and match. But then I haven't really tried myself, so don't let me rain on your parade.
If anyone would know the answer to this question, it would be Sleuth. He is best man for tweaking BT that I know of. BTW, I haven't had any trouble BT filesharing (assuming you mean objectpush?) with SuperD-Lite. What are you trying to share with?
Click to expand...
Click to collapse
Oh i see. Im not very knowledgeable about how bt is incorporated and all.
Well I've had trouble finding, linking to, and sending files to my bro's phone (it sometimes works, sometimes doesnt). First he had an LG CU500, now its a Blackberry 7130c. Same with each. I've tried the "file explorer to find file and select 'beam file'" method and Dr. Yar's bluetooth app. Working bt isnt life or death for me, but it was always handy to share a ringtone, etc.
I just tried again with the blackberry. I went in with file explorer, chose a small mp3 on my storage card to send, chose "beam file", waited till his device showed up, clicked on it, and then it said "failed". Is anyone else having similar issues?
EDIT: Ok so now i go and find my old Razr cuz i know bt works on there, and lo and behold it sent! I guess its sometin about the blackberry. Although im still interested in if htere are any ways to improve/upgrade bt.
There was development underway on the Widcomm Stack nearly a year ago... check out this from the wiki Hermes Widcomm Stack I think you will find your answer there.
...and yet I find this stack 10000% better than what was on my 6700.
Especailly with my Audi, the BT never turns off when the phone goes to sleep and all my contacts show up in the HID.
It has been perfect so far!
I had issues with Bluetooth when I was using the latest official WM5 release for my Cingular 8525. None of my Bluetooth headsets would stay connected or even paired. But since upgrading to the "official" AT&T WM6 ROM, Bluetooth works just fine!
I have had very little if any BT issues using vp3G's 3.0 ROM. Very happy but waiting for 4.0!
I'm on Schaps 3.54c and my 8525 has been perfect with my Parrot3300GPS in my car. The parrot picks up battery, signal, contacts, etc. No problems. I wish my Wizard behaved that well.
Looking for a way to hit the mic button on the wired headset that comes with the TyTn to dial a number with a voice tag. I am using the leaked official WM6 rom which has the cyberon voice dialer working. What I haven't been able to do is launch the voice dial using the button on the mike. Even AE button mapper cannot pick it up as a button to be configured.
To do my homework, I searched using 8525, headset button, config, etc. but a) I got hits for other phones (ba, etc) and b) got a lot of posts on how to set up bluetooth phones, which doesn't apply in this situation. I found this cab ba_wm5_voice_dialer.zip but it didn't install complaining about insufficient rights, which I had never seen on a pocket pc. Maybe because it's for WM5.
Any help or links to previous threads on this would be appreciated. Right now, I have to take the phone out of my pocket to dial, which kind of defeats the purpose. Many thanks in advance.
I have no idea whether this helps or not but I remember this as a big topic on the Wizard when it first came out and there was this post http://forum.xda-developers.com/sho...highlight=voice+dial+headset+mic+button+wired I'd be interested to know if you get anywhere
Well, I tried those - thanks for the link. I get no feedback after I run the program whatsoever, so I guess it doesn't work. It does run though, since if you run it twice, it gives you energy levels- that much works, but the rest doesn't seem to.
I'm surprised dialing with the wired headset isn't supported out of the box since it's a part of the package, but oh well. I hope someone else has heard of something about this for the tytn.
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
e-thug said:
Ok, so I finally got into the smartphone game to get a better music streaming experience. MFRadio and MFScorn just weren't cutting it for me anymore. I hated the skips and the ridiculously long (and repeated) buffering time. So I first looked at Android phones but went with WinMo because they say you can run both OS's with WinMo (and the only Android offering from AT&T has a 12-hour standby time before the battery dies, according to reviews).
I have a Bluetooth head unit and have had over a dozen phones paired with it. This phone however is a completely different story. I have installed the latest "release" from AT&T (from a thread on this site). At first I tried streaming with the bundled Windows Media Player which apparently doesn't stream anything at all (with both the bundled and downloaded releases of the OS), then downloaded TCPMP. TCPMP is everything I have ever dreamed of in a streaming media player, but the only problem I have with it is that it won't connect to a stream unless I have already opened up a browser window and went to a website. Not the end of the world.
So, I get in my truck and initiate pairing to the phone. It sees the head unit as a Hands-free and as Stereo Audio. I can get it to connect for a split second and then it dies. I get a popup notification that tells me that the phone cannot control volume when paired to the bluetooth device and audio must be adjusted from the device itself. Fine. But then it doesn't work at all. At first, I wanted to blame TCPMP until I realized that nothing at all was working with the head unit. I think I got it to work once but it never worked again.
So is there any way to fix this problem? This is the one thing I wanted working on my new phone. Yes, the notifications that my texts were successfully sent are very annoying (as well as the other notifications), and yes, Windows Media Player for Mobile is useless, but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
What can I do? I have not yet unlocked anything (although I have a SIM unlock code waiting) and have not yet flashed Hard-SPL. My phone has Bluetooth for Windows Mobile Version 1.9.2 Build 600 HCI Version 4.84. I'd do anything at this point to get this working. Windows Mobile is not that precious to me either. PLEASE HELP!
Click to expand...
Click to collapse
Hmmmm .... I don't believe you ever stated what type of headset you are trying to get working here? I find your problem to be very strange, even though WinMo does seem to be lacking in a lot of different areas, audio streaming via bluetooth stereo headset is definitely not a problem I have encountered. It even streams flawlessly through my 5.1 hooked to my pc via a crappy 8 buck bt dongle and still sounds excellent. Have you considered that the problem may lie with your bt headset itself?
Also, when you say that you installed latest "release" from AT&T (from a thread on this site), what exactly do you mean? I am running the "unofficial" leaked rom from AT&T on mine and I just paired my Motorola S9 stereo headset and it is playing great for me. You also may want to try using some different software, give S2P (Slide 2 Play) a try and see if you have different results. That's what I am using right now, but I have used TCPMP to play a few xVids through my headset and have had no problems.
The problem is not in the head unit. 25 other phones can't all be wrong. I have no problem using my bluetooth headset. That is probably why you don't see the problem. Anything more complex than a headset will not work with this release. The problem lies within the phone as soon as it displays a notification (which, of course I cannot disable) which reads, "The connected Bluetooth headset does not support volume adjustment from the device. Adjust volume on the headset itself."
That message is the kiss of death. So basically any Bluetooth head unit will not work with this phone? Sounds like shoddy programming to me. Yes, I am using the "leaked" release. I really don't think this release will ever see the light of day. Its horrible! You cannot disable notifications (I don't need to know when my text messages were sent successfully), and it looks like whenever I get a system notification, any program I am using crashes immediately. Like I said before, as soon as I get a notification, I lose the Bluetooth connection (which is like a split second before the notification comes up). I highly doubt this "leaked" copy will ever see the light of day, officially (unless AT&T and HTC do absolutely zero testing on it).
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
My Tilt 2 works absolutely fine with all my BT devices, including 2 Motorola headphone sets and my Sony Xplod head unit in my truck.
e-thug said:
A little clarification for those who don't know... when I say "head unit" I'm talking about a Bluetooth-enabled car stereo and when I say "headset" I mean a Bluetooth headset
Click to expand...
Click to collapse
I was mis-understanding you about the head unit, I did think you were talking about a headset. Sorry bout that, my Mustang doesn't have built-in BT so I have to use a Motorokr t505 for those chores. It works well but it does give me the same message that you are getting about "volume can't be cotrolled etc" but I can dismiss it and carry on without any problems.
but the fact that I can't stream Bluetooth audio on this phone really makes this phone worthless to me. Didn't anyone bother testing this stuff before releasing this garbage? The Tilt is a paperweight to me right now because it can't do the one thing I want it to do the most. I might as well go back to my Sony Ericsson W760a at this point!
Click to expand...
Click to collapse
Since you don't need your phone for calls, just get Sirius or XM. Ya know, considering you only stream music through the phone..
Did you try the BT headset or head unit with the original stock ROM before you flashed the "leaked official" ROM?
Seems like you might have a couple random issues, with the BT issues and the system notifications crashing programs. I haven't flashed the leaked ROM, but I do know that many random issues with cooked ROMs can often be cleared up by running Task29, which completely wipes the phone memory before you flash a new ROM. I think you will need to HardSPL before you run Task29. Might be worth a try, sometimes fragments of the old ROM interfere with the new one, and cause some bugs.
Bluetooth protocols can be implemented differently by different manufacturers.
I know of many people including myself who have NO PROBLEM with the tilt 2 and different Bluetooth products INCLUDING car radios.
I am using the "new" AT&T ROM and have no difficulties.
Clearly your pissed but your subject is wrong. I would suggest changing to "Worthless as $HIT to ME"
I think my problem is that I am getting notifications which seem to be killing my connection. Is there a way to turn all notifications OFF? The only ones I care about are missed calls, incoming SMS and maybe a birthday. I would like to try to kill the notifications first because I think this may solve my problem
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/06/24/enable-or-disable-the-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/06/24/tweak-and-configure-how-notifications-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
redpoint73 said:
You can get yourself a free reg editor (like Total Commander) and apply the following tweaks to modify the notifications:
SMS sent notification: http://www.mydigitallife.info/2008/...he-sms-text-message-sent-notification-bubble/
Other notifications: http://www.mydigitallife.info/2008/...cations-work-in-windows-mobile-notifications/
Although, this sounds like a band-aid just hiding a deeper problem. What you are describing is not typical behavior, and this is something else going on.
Click to expand...
Click to collapse
Thanks I will try these out and report back
For the record my head unit is a JVC KD-BT11 and I have never had any kind of problem pairing any other phone
Somebody else just posted a very similar issue, and found the app hAndyUtils to be helpful:
http://forum.xda-developers.com/showthread.php?t=741311
I think hAndyUtils might just be a app-based way to make the reg edits I posted earlier. But give it a try.
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack. (Just as an aside, on all my past phones, there were people bemoaning the the fact that it had MS, and trying to replace it with the Widcomm, so I am getting a real chuckle out of folks complaining about the Widcomm and wishing for MS )
In any case, the utilities (Blue music toggle etc...) that used to work for me to toggle between streaming in stereo and plain phone qulity no longer work. However, all my stereo headsets (I own three different brands/pairs) all work perfectly with the Tilt 2. And stay connected and streaming all day.
By the way, coming on a forum that is full of people helping each other and using profanity, anger and threats, is not the most conducive way to get your questions answered. The odds are that the problem you are having is already solved somewhere among the 6+ million posts in this forum. I do not know where or I would post it for you, but it is probably out there. Good luck. And if you find it, please post the link to the answer back here so that other serchers will find it too.
maybe it can come from the phone itself
i had a rhodium for almost a year and never got my motorola headset ht820 to work well enough for me to use it... (more skips than music...cant move my head without a skip)
i flashed to a NRG rom before trying my headset...i tried eveything as far as ref setting, different radios...even flashed my ht820...
no improvement...
then my phone fell in water not so long ago...got another rhodium same model (european)...and it worked perfect out the box on stock rom i can go in a different room than my device and still hear music with no skips...and it still does with nrg rom and latest radio...
so my guess is maybe some actual devices have bad bluetooth hardware ???
I have the Motorola S9 and the HT820 and both work absolutely fine on my Tilt 2.
yatrg said:
I scanned through the topic and did not see anyone mention this so I thought I would add my .02. The Tilt 2 is different than many other WM phones when it comes to bluetooth as it contains the Widcomm BT stack instead of the MS stack.
Click to expand...
Click to collapse
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
e-thug said:
Can I change my Bluetooth stack to MS? I have installed Hard-SPL and have experimented with cooked ROMs to no avail.
I sent the phone back to AT&T, went to Trinidad & Tobago for a few weeks and came home to a new Tilt 2 waiting at my doorstep (which could have been stolen by anyone!) and I am still having the same problem. So I guess I sent back a perfectly good phone!
I would love to try some different Bluetooth stacks if possible. Where do I go from here?
Click to expand...
Click to collapse
Did you ever try the solution in this thread? It fixed a lot of issues people were having with bluetooth car kits. Maybe it will work for you: http://forum.xda-developers.com/showthread.php?t=591322
The solution source is here: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html
And here is the solution. You need a registry editor to do this:
1. Modify the HandsFree plug-in:
HKLM\Software\WIDCOMM\Plugin\HandsFree
i. Change SupportedFeatures to 45 (default is 1135)
ii. Add value HFBDA binary, set to same value as LastConnectedBda
iii. Add value HFDeviceType decimal 2
2. Modify the WIDCOMM bluetooth general settings:
HKLM\Software\WIDCOMM\BtConfig\General
i. Change bdaddr to (no value)
ii. Change (or add if not there) DisableReopenAudio to 0 (default is 1)
3. Reboot device
You may also want to do the A2DP quality registry edit: Add a DWORD value of LineSpeed to HKLM\Software\WIDCOMM\Plugin\AV\ with a value of 320.
Give it a try, it may work for you.
I will give this a try and report back. Thank you very much for the response!
No luck. And my bdaddr keeps resetting to a binary value when I reset the phone