Hi,
I've got problem to launch Modaco ROM 2.8. Previously i had 2.7 and I wanted to check out Motion Blur ROM. I have done nandroid backup and flashed new rom. Because i couldn't login to Motoblur account (It's needed to use this ROM) I decided to restore previous ROM. I think by mistake i pressed nandroid buckup again and i lost my Backup. I managed to copy 2.8 ROM to my SD but when i removed safety USB storage I noticed SD card icon with information that my Card is possible damaged. Since then i had problems to us SD. Windows wanted to format my card every time I tried access. I checked what it like in Partition manager. It showed me only one partition Fat 32 1.8GB (should be 1.5GB Fat32 and Ext3 + swap partitions) So I format it again and created new linux partitions. Windows could read SD but Mobile still showed Damaged Card. So I restarted Mobile and now i can't do anything. It's going to Hero Logo (waves robots) and then going to HTC Logo and then goes back to Hero Logo. Is it just because my SD is broken and buying new SD will solve the problem ? or did I break my mobile permanently ?
Thanks
Sorry for my poor English
///edit I just removed SD and it's working . Need to buy new SD
i've experienced a very similar problem where it reported my sdcard to be damaged and worse my phone won't even boot.
what i did was to remove the sdcard and it booted fine ( i had mcr 2.5 working), then noticed sdcard reported no issue. then simply rebooted to recovery, wiped, and applied mcr2.8 zip file.
kroosh said:
i've experienced a very similar problem where it reported my sdcard to be damaged and worse my phone won't even boot.
what i did was to remove the sdcard and it booted fine ( i had mcr 2.5 working), then noticed sdcard reported no issue. then simply rebooted to recovery, wiped, and applied mcr2.8 zip file.
Click to expand...
Click to collapse
Had a similar problem didnt have booting problems though, solved the problem in exactly the same way as kroosh. The problem stems from the swapper app which did come as part of the rom but is now only optional.
I had swapper too & guess you are right.
Unfortunately the 2.8 is getting sluggish and not sure if it was the swapper as well. I will try to restore 2.5 and see how it behaves
My card wasn't recognized because it was formatted in wrong format. I managed to install new recovery image v1.2.3 and i have created partition from there and its working fine now.
Hi
I had the same problem with my hero, if you disconnect the usb wrong ect. And the "damaged SD" error appears. I first didn't know what I was doing wrong, (was new to Android) and I re-formatted my SD card twice.
Anyway, after a while, I relize just turn off the phone, remove card, wait a few seconds, and put all back together.
Hope this works for you
Regards
Related
Tons of new ROMs coming out now based on OTA and adding A2SD+. But one big issue. Quite a number of people have reported problems with corruption of their SD cards when setting the Desire into Disk mode and connecting it to a PC. I've read it the first time here
http://forum.xda-developers.com/showpost.php?p=7463184&postcount=348
and I can confirm it is reproducible.
Regardless if connecting to Windows or Linux, the card gets corrupted. It does not matter if you properly eject the drive. The Desire will respond saying the SD card is Read Only, and the only thing that one can do is to repartition it to fix the card.
I don't know what A2SD+ application everyone uses in their ROMs but I expect it's all based on some common version like the one put in from ieftm. As this is a serious issue it would be great if all you ROM cooks could look into it and try to fix it. Alternatively it may be a good idea to produce non-deodexed versions that save a significant amount of memory when installed normally without A2SD+.
Thanks for considering
I have this problem aswell its a bit of a nightmare there are a few files on my sd card that I can't even delete using andexplorer or my pc. I think the only way would be to remove my card and format it. I have never had this problem before only when I started using the 2.2 rom.
Noticed it before, i took the SD card out and put it into a cardreader, couldnt do anything in windows, said it was read only. Access via USB cable worked though.
Not that much of a issue for me, I mainly transfer files via Wi-Fi anyway, but I guess thats the explanation for the read-only behaviour.
Happened to me today, however I restarted the phone and everything seems okay now... :/
edit: nope, connected the phone again, chose "charge only" and then disconnected. The notification about my card being corrupted occured again, tapped on it and it went away... Dont know what to think..
I have the same problem .. And now it seems like the SD card is totally corrupted. Its not even possible to do a format
Okay thats it... Doing the titanium backup, nand backup and flashing some rom w/o A2SD+... :/
Out of curiosity guys, did the corruption of the SD card occur to the stock SD card that came with the Desire? I had the same problem with the stock card..
It seemed to unmount 3 or 3 times over a week and the next thing I knew it totally died and could not even be reformatted.. Happened on stock 2.1 that came with my Desire.. after I swapped to me own class 6 8gb Transcend I never had the proble again.. Just gonna upgrade to 2.2 now.. *fingers crossed*
Oh and yes.. I use A2SD+ on Modaco's 3.1. But that was after that card got corrupted..
I'm using card that came with the phone.
I'm going to try another Froyo Rom, just OTA rom rooted and we'll see.
Edit: I made my ext3 partition with ROM manager, if it makes any difference...
God dammit!
http://forum.xda-developers.com/showthread.php?t=747480
Yes its the card that came with the phone .. but it happen after i created the 512MB EXT3 Partition ... and I'm running this ROM : http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=741775&highlight=official it doesnt even use A2SD+
I dual boot my pc with windows 7 & ubuntu.... windows 7 scan and fix has repaired mine numerous times
I have class6 A-DATA 8GB and no problem. But with my last G1 i haved same card and with swapping goes to hell... I now correctly unmounting and disconnecting mobile from PC, after i save from PC to card. Flash have problems with writing.
This looks like a serious problem - it happened to me twice already. Devs, please have a look at this!
I have also had similar experience, SD card corrupt, yes it was the original card that came with the phone, EXT2 partitioned and using APSD+
Now why this happend is a mystery, but something I noticed when I tried the SD card in the PC - it was recognized, but said it must be formated, so I tried but it only saw it as a 32mb capacity!!! (it still would not format though - failed format..and since is no longer reconized at all..)
But, this made me think it "MAY" be something to do with the fact that when I did the Ext2 partition I seem to remember it also created a 32mb swap partition, or using Ext2 instead of Ext3. I have since learnt that it is advisable NOT to created a swap partition, so with my new SD card, after more reading about Ext partitions etc, I have only created only the Ext3 partion as I understand this is better than Ext2 and is less prone to corruption, and no swap partition and have had no problem since!
See this excellent post :- http://forum.xda-developers.com/showpost.php?p=7458565&postcount=8
It would be interesting to have some input from one or two of the developers with knowledge in this field to get an idea why this happens, and how it can be prevented.
It is also possible the the SD card was going to become corrupt anyway... with or without the help of Ext? / APSD+ - it does happen!
delta-101 said:
I have since learnt that it is advisable NOT to created a swap partition, so with my new SD card, after more reading about Ext partitions etc, I have only created only the Ext3 partion as I understand this is better than Ext2 and is less prone to corruption, and no swap partition and have had no problem since!
Click to expand...
Click to collapse
my sd was corrupt using a 512MB ext3 partition without swap partition in SD card :/
Try in windows: start > run > chkdsk x: /f
where x = desire drive letter.
I believe i did this in recovery mode > mount usb.
That's what happens when you don't want to use Froyos own A2SD implementetion because "widgetz doesnt workzz on dat."
Apps are not meant to be on an external EXT partition.
Wait until ROMs like CM have built in A2SD+, these hacky shell scripts can cause serious problems for the SD card.
LeeDroid said:
I dual boot my pc with windows 7 & ubuntu.... windows 7 scan and fix has repaired mine numerous times
Click to expand...
Click to collapse
Windows can not access EXTx partitions. As such is unfortunately not possible that it could possibly repair a broken SD-ext partition A2SD+ uses.
delta-101 said:
I have also had similar experience, SD card corrupt, yes it was the original card that came with the phone, EXT2 partitioned and using APSD+
Now why this happend is a mystery, but something I noticed when I tried the SD card in the PC - it was recognized, but said it must be formated, so I tried but it only saw it as a 32mb capacity!!! (it still would not format though - failed format..and since is no longer reconized at all..)
[...]
It is also possible the the SD card was going to become corrupt anyway... with or without the help of Ext? / APSD+ - it does happen!
Click to expand...
Click to collapse
I can confirm the corruption without any APSD+ ROM
I had a Stock Orange FR 2.1 ROM, and the 4Gb card that came with the phone get corrupted definitively (recognized as a 32mb capacity too, it has something to do with the Cylinder-head-sector combination).
Anyway, I'm going to try APSD+ with a class 2 PNY 16Gb, and tell you then if I get a corrupted card.
FYI, the Sandisk warranty is applicable for the original card: replaced in 5 days
I got some problems too with corruped files on my SDcard and had to format it. I'm thinking that from now i'll only mount my card to pc in recoverymode... maybe that is safe to do?
Hello guys, very very sorry if this is a repost. I've had a quick search but i can't spend my entire days searching. Apologies also if this is in the wrong section.
Please read and comment on my abbreviated story
Was running telstra branded froyo
Now running Leedroid (just did it yesterday)
Used ROM manager to partition the SD card, worked fine for a while, until i got silly 'read only' errors which i'd never seen before.
Tried to reformat the SD card. Lost some apps and decided to start over hard resetting everything because i'd lost everything that had moved to the swap partition...
Cleared the partitions on the SD card and rewrote them into a 10gb fat32, 2gb ext3 and a 2gb swap
Reflashed leedriod with another smaller card - works ok.
Tried my big card again and it didn't boot, stuck at the boot screen forever.
Put small SD card back in and it works... but some apps are now mising such as rom manager, titanuim backup, and the other things which i'm not familiar with.
WTF is going on. My head is throbbing! arrrrrrrgh
have i partitioned my card correctly?
Maybe try and partition the card in another way. rom manager did
work for me but ive also had similar problems before. Try the g-parted
method if you can get youre head around it, just try and format/partition
the card while its out of the phone because for me, thats what gave me the
exact same problems you mentioned.
If you ever want to back up the apps from sd-ext (apps2sd) you can
use titanium backup. I was in this same boat recently and found that the
easyest way. Also i dont see the need for any swap partition but i could be
wrong.
i use: 1gb ext3, 0 swap and the rest fat32 (16gb card)
good luck
So you flashed Leedroid A2SD+ with your "smaller card" in the phone?
And you just swapped the card to the "bigger one"?
In that way, the only way to make it work is creating a NANDROID backup with your "smaller" functioning card and copy that to the "bigger" one (must be in the same folder!).
Then put the card (bigger one) and do a full wipe & restore the NANDROID backup you've made previously.
Also, ROM manager is a piece of cr*p in partitioning, i had issues until i used GParted to create the partitions and no problems since.
It's funny you should mention this. I've had the exact same problem.
Small SD card works, big SD card doesn't work after being partitioned using ROM Manager. It gets stuck at the bootscreen for ever, and ever.
I will do some more testing when I get the chance.
Hey champs, i put the big sd back in the computer, turned it all back into fat32 and it works just fine.
Then i used rom manager to partition - 512 ext and 256 swap.. not enough imo, (crappy fkin desire fault). Might leave it for now... unless that read only disk thiing happens again
Cheers for the reply guys
I used to make backups before with amon-ra-recovery 2.0.0 and everything was great, I could restore everytime I wanted and I didn't have any issues.
Suddenly, since some time, things started to go wrong. Not a single nandroid backup I do is working, they all get corrupted immediately and I get that "error, run nandroid via adb" or something similar, error, you probably know it. The md5 is corrupted on most of the .img files and even if I change them to be correct, I manage to go through the entire restore process, but the system is whacked, it either goes into bootloop, either it boots fine but sd-ext is gone and all the screens are empty like I never had any widgets or app shortcuts on them, and sometimes I'm lucky and I have only some minor bugs which are fixed by reflashing the ROM without wiping anything.
I can't remember if this happend since I updated to ra recovery 2.0.1 (I am now back to 2.0.0) or since I changed the SD card into a class 6 one. The partition is 1gb ext4, it is done properly (I repartitioned with ra recovery 2.0.1 a few weeks ago and still problems, the previous partition was made by g-parted), SD seems to be working well, I really have no idea what is causing this.
I am willing to try clockwork mod recovery today, can anyone provide a source for their latest version please? I can't find anything on google except for some old threads.
which card are u using ?
The new one. 8gb class 6, I don't see what difference does it make...
I am now getting a problem that I also had before I repartitioned the SD card last time, after doing a nandroid backup today, now I am getting an error telling me that card is read-only. I can't mount it to PC (I mean i can have disk drive on phone but when trying to open it from PC it says its not found). Last time I had this problem I couldn't delete sd-ext.rar from the nandroid backup folder, it said it was corrupted and I couldn't do anything, just like now. Can't connect to PC, can't unmount the SD from phone and on available space it says read-only, that is the problem, how can I solve this? I'm really not in the mood to repartition all over, is the card broken?
Edit: I am now going to report a problem that I've only had on this SD card so far, never on the old one that comes with the phone. So I rebooted the phone and now the sd-ext isn't recognized on the phone, apps that were installed on it don't show up in app-drawer and some widgets that were also on sd-ext don't display on the screen, says problem loading widget. I had this problem once in a while with most of the ROMs I tried, ever since I switched to this card (i think it happened in the 1st day this card arrived). When I reboot the phone (either I normally reboot it or the battery dies), sometimes this thing pops up. It doesn't say any errors, its just that the ext partition isn't recognized, but the fat32 is ok, I can access the SD card's content via root explorer for example and I can even mount it to the PC and explore it from the notebook, but ext partition isn't recognized.
Like I said, this is only on this new card, doesn't happen to the old one, and it happened even in the 1st day it came and was inserted in the phone. I also repartitioned it and same problem, both times did it correctly exactly as I did with the old card and everything was ok on that one.
The exact problem is "mounted read-only - the sd card has an unexpected problem. Tapping...(can't read any further cause it doesn't fit entirely in the notification bar)". It happens when I try to do a complete titanium backup (for all system data+user apps).
Common any opinions? Im really worried.
So i've done a nandroid backup with clockwork mod 2.5.0.7 and its corrupted as well. Just after it finished the backup, I mounted in usb mass storage mode and went to check the md5 images, they are corrupted. I'm going to make a final repartition today with g-parted, and if it's not gonna work then I will probably switch to my old class 2 card that came with the phone, I'm only dissapointed that I cannot prove this SD card I recently got is broken, the fat32 is working but sd-ext has problems, they probably won't believe this and won't replace it
Hi
I am having trouble with my SD Card on HTC Desire. The whole problem started this morning, so let me walk you through the whole thing:
I installed CM7 nightly # 24 last night. My phone was working absolutely fine before that. It was late so I just set ROM Manager to make a backup and install the new ROM, and went to bed. When I woke up, it had installed and was working fine. Then I dunno for what reason I had to restart my phone. And when I did, all hell broke loose!
The phone rebooted and gave the error message that there is a blank memory card in the phone!!! I restarted the phone a few more times, took out the card and cleaned it, everything, but it just won't recognize it. I went into recovery and mounted the SD card to connect to computer. But the windows (win7 x64) gave error message that the card has an unrecognized or corrupted file system. Since the only backup I had was on SD card itself, I realized that I was officially screwed.
So I formatted the card in the windows. And now it was showing the full 7.37GB size of the card. Meaning it had also somehow removed the 512MB sd-ext partition I had on it as well. But I said fine, no issues. I can reinstall all the apps and settings etc.
So I installed the CM7 RC2 just to be safe, and went into ROM Manager to make the ext partition. I set it to 512MB, swap size 0MB, and the phone restarted into recovery. It started the partition, but only after 3 or so seconds, it rebooted. I checked, but it hadn't partitioned the card! Weird...
I figured maybe there is a problem with the format Windows did, so I formatted the card once again from recovery. Just to be safe, I wiped everything and reinstalled CM7 RC2. But again, no luck with partitioning. Installed Nightly # 23 to get the latest patches and all, but again no luck.
Now I made a GParted USB boot drive, and tried partitioning with it. But GParted also wont partition it. There was this attention symbol next to the drive. I double clicked the drive and it showed this error in the next window. I took a picture of it from a friend's phone, attached below.
I also took a snapshot from within gparted, but it saved it at some /home/something location and I cannot find it. So if the attached image is not clear enough, or if you know where to look for that snapshot, please let me know and I'll post that. Its not in the boot USB drive or SD Card, and its not in my C: drive either.
I would really appreciate if someone could tell me what the hell is going on with my SD card, and how to fix it. Its a Class 2 card, about 6 months old, and I really hope it isn't dead.
Seriously? No one??
Use the recovery and not Rom Manager or use Gparted of something like Easeus.
I use partition wizard on the computer for partitioning
Sent from my HTC Desire using XDA Premium App
hey guys,
I turned my phone on today and when it booted up it didn't have apps i had installed and came with the error selected app not installed blah blah blah.... i thought well ah man f**k this i'll just restart and this s*** will be sorted, but no nothing it seemed even worse in fact..... i thought alright take the sd out and blow it around nothing! infact it made it worse! it wouldn't even boot any more it got to the point where it would just like load the custom boot screen and loop that repeatedly. i've tried many diffrent roms and nothing! i mean some would boot (but without apps working etc etc...) and some wouldn't at all (i found these often would if i removed the card) , i left them all for a good 15 mins and still nothing... please help just as i started finding this phone cool again it breaks
TL;DR:
phone won't boot at present when it does boot with certain roms apps are there
EDIT: oh and i've tried another sd card to no luck
may be there is some issue with your sd card partition. what you can do is, backup the file from your SD card to your pc, format it, create partition (fat32, ext3 & swap), copy back the backedup files to SD card, put it in the mobile, go in recovery mode and to restore. hope this solves your issue.
i've tried all of that with no luck