Related
Hi all,
let me start telling that reading through this frum gives me the feeling that this is a very nice place for information around htc-devices and I thank both creators and users of this site for such a good information-base.
Reading here convinces me that I am able to fulfill my wish to change the language of my VPA-IV (HTC Universal).
I am a Dutch person working in Russia. As I was living in Germany I optained the device there, hence the German language.
For me personally all computer stuff should be English, so I'd also like this device to be so. The fact that the keyboard is German does not disturb me too much.
As a Vodafone user, who has other provider cards as well, I immediately bought the unlock code, so the device is working with other GSM cards as well.
When I asked Vodafone (before I bought the device) if I could switch to English I was told that I should buy myself another Windows Software and they were not able to provide me with it. They were not able to provide any help, nor software for this purpose though.
When reading around the site here (as well as the ftp) I understood that Windows is not provided now. So my first question would be :
-Am I really set to go if I have downloaded the following files :
Jasjar_WWW_11353_137_10301.zip
MaUpgradeUt_noID.zip
Universal_Radinly_UPgrade_1.04.02.zip
Or do I need something more ?
Further I read about extracting the .exe file (f.e. Jasjar_WWW_11353_137_10301.exe) and put some files from there at certain places. I have WinRar but this program does not recognize the .exe file. Can I really extract files from this .exe ? How do I do this.
A lot of talking is here about a bootloader. If the device is in this stage, can I still access it ? (f.e. like seeing a harddrive in my PC's Windows Explorer or something the like)
As I will be stressed like hell (who does not, when he does this first time) when I see the bootloader screen, is there something I SHOULD or should NOT do to make sure all will be OK ?
Last but certainly not least I feel very eager to backup before I do this. Is there a posibility to backup my ROM in some way, save the files on some place for eventual return to the ROM and ExtRom I have now ?
I tried the Program TotalCommander. If I enter the Extended_Rom in the "directory" field of this program I see all files included in the Extended_Rom, same if I enter simply "Rom". Is a backup simply copying these files to my PC or is there more to be done ?
thanks for answering in advance,
Ruud
Hi,
I'm searching a german ROM...
if you have a little of your time to spend on it, i would be very thankful.
but first:
- about extracting the .exe files: Run WinRAR -> Menue: Open file... -> change 'All archives' to 'All files'
- about ROMs: Jasjar_WWW_11353_137_10301.zip is the only rom I would update, not the Radio.
- about bootloader: In this state you can't access your device (only updating the ROM)
- about backup: It is not easy. (How to d2s (dump) the ROM ) but I think Vodafone will shortly relase a update. So it will be possible to restor the device.
How to help me out:
- you will need a Storage Card.
- Download TestWM5.rar
1. Extract TestWM5.exe from TestWM5.rar and place it to you device.
2. At the device, use File Explorer to execute the TestWM5.exe
3. Click "button1" to start the dump process, the file will then be save to \Storage Card\Dump\
4. Copy the Dump folder out and then RAR or Zip it
This will include all files in your windows dictionary -> this is what i need
Where to place exactly ?
Hi bepe,
do not know if You are still available (or again). First your issue.
I logon to FTP from XDA-developers as to upload.
In the upload directory there is only a HTC-Wizard directory, not a wizard. Is this directory the one to place your file on ?
Is there a rule how to name the file ?
I will be dumping in a minute, can upload as soon as I have your answer.
Ruud
Hi bepe,
further to your issue.
1) I do understand that no private information is copied ? or should I do a hard reset before I dump for You ?
2) Whilst running your testwm5.exe from the root-directory of the storage-card I am being asked to agree your program access. This is normal, I allow. But why are there additional programs being opened I never heard about ? I denied them access and let the program run further !
After a lot of files running through the screen (very fast) it looks like the program stopped or finished. Now which file has been created for You ?
Explorer on the Universal does not show it, through my PC I looked as well, but do not see any big file, please explain.
Ruud
Hi Bepe,
one more reply to You :
Even if I allow the file mentioned to run (during the time your program is running), I am being asked again and again if I allow it again. The name is GAC_System.Data_v1_0_5000_0_cneutral_1.dll
Even if allow access all of the occasions I being asked, no file is being created on my storage-card, nothing to dump to You. Not even the dump directory is made.
What do I do wrong here ?
To my issue :
First I noticed that the radio update is available here only as 1.04.02
My system tells me I have 1.04.10 delivered from origin. If I do a ROM-upgrade, do I loose my "radio", or will it not be touched ?
Connected to this, can I dump my "radio"-files seperately ?
WinRAR. Issue solved !
Backup : I was at the buzzdev.net link before. But I actually do not even understand where I can get or see the task32 language he dumped on his screen. And I understand that I will not be able to restore it without help anyway. So this is not really the kind of backup I want.
The information about Vodafone, where does it come from ? when is something expected ?
Ruud
For security sake only.
I am getting nearer to make that final step ;-)
My Winrar was too old, I could unzip the .zip file to a .exex, but I could not unzip the .exe file further. Just downloaded the latest Winrar, now I can see all files included in the provided .exe file.
1) I understood that I should delete the original upgrade-file called ROMUpgradeUt.exe.
2) When I start the MaUpgradeUt_noID.exe in a seperate directory with the rest of the files from the .exe I get to see a different HTC device. When I continue, it will not recognize any of the versions from my Universal. I felt unconfortable to continue.
Can it be done without a problem ??
2a) I renamed the ms_.nbf AND radio_.nbf and restart the Utility, it still shows a photo of the wrong device, but it now does recognize the versions of Device CD image version : 1.13.56 Device Extended image version : 1.13.163 and Device Radio image version : 1.04.10
It confirms to change to CD image version 1.13.53 and leaves the extended image version : "empty" as well as the Radio image version : "empty"
Does this mean that by taking away the ms_.nbf and radio_.nbf files I can stop the device from upgrading the extended rom and the radio ?
Why I ask ? Because if I renamed ms_.nbf back and ONLY radio_.nbf is unavailable now, it shows to change the Extended Rom too, but the Radio image is still empty.
Finally if I rename ALL back, it shows to change all, but all version numbers are older once ;-(
Main question here is, can I leave radio_.nbf away, upgrade and hope for radio to be my version 1.04.10 ?
Ruud
Hi,
I'm back.
I'll PM you Upload information...
private information are not copied.
Only if you have saved private information in your /windows/ folder!
i have never being asked to agree for program access :?
...but I started it of the root-directory of my device.
what is the name of your 'Storage Card' folder?
I not realy have the info from Vodafone, but for all devices before there have been more than one update. But I can't tell when the first update is expected.
If you are trying to make a backup: you will need a terminal program
About dumping
So I have a complete "new" device now.
Did a hard-reset, after which I did not give any new information to the device.
I placed the .exe file You gave me in the \windows\startmenue before, after which it is asking tonloads of access requests.
Now I replaced it in the root-directorym Yes, no additional questions asked anymore, perfect, well NO. As there is no directory made on the storage card. I tried it once with the async active and once with the device seperate. No result.
Any ideas ?
what is the name of your 'Storage Card' folder in your root?
As the device is German, it is called "Speicherkarte"
and renaming is not possible (allowed)
OK this is the problem, I'm trying to get the Source code to change that.
found something: this tool will change the folder name from different languages to "Storage card" which is often needed for different tools
Understood.
About my question, as I am still nervously waiting (cannot start the upgrade before You got your data, can I ;-)
Did I understand correctly, that the file MaUpgradeUt_noID.exe is made for different devices from HTC and therefore I do not get a photo of the universal when I start the software ?
If I start the JASJAR_WWE_11353_137_10301.exe I DO get to see the Universal, but of course get the country error.
Did I also correctly understood I can take away the radio_.nbf from the directory and the update will handle both ROM and ExtROM but leave the Radio untouched ?
Will I be entering this "bootloader" status at all, as I do not need any further updates then ? Are there any resets after the upgrade which I SHOULD or SHOULD NOT make to get the device working again ?
Ruud
Hi bebe,
storage.cab works (be it only after a soft-reset)
The program testwm5.exe is much slower now, so the result is taking minutes now (if not tens of).
Looks like the perfect speed of the program while the storage card (at least for his eyes) was absent, was due to "saving into space"
Will upload asap.
Ruud
I'm loading JASJAR_WWE_11353_137_10301.exe its at 60%
MaUpgradeUt_noID.exe is a hacked version, of another device.
So the photo should not be important. (Please wait until i have downladed the file, I'm not realy sure jet...)
OK, I have to wait anyway, because TestWM5 is very slow now, I can see file after file and calmly read it. Before it was running before my eyes. I am afraid this is going to take ages.
We are on the same frequency that the dump I am making is from a device WITH Extended Rom installed. I was NOT soft-resetting during installation, so all Vodafone add-ons, are to be there now.
If You need the one without ExtRom as well, please tell me.
The upload works OK, I prepared a directory there, but uploading is to be done after longer waiting time.
Are You afraid the JASJAR file is not good ? I downloaded it because this one was proposed on this forum.
Ruud
Its not about the ROM its about the MaUpgradeUt_noID.exe I'm not sure if ths is the exe file to update a Universal.
I dont have a Universal only a Himalaya and my up UpgradeUt starts with HimUpgradeUt... .
Was this file mentioned in the readme of the JASJAR exe?
my download is very slow... 70%
I only downloaded MaUpgradeUt_noID.exe because it was proposed here (for the Universal).
I have no Readme.txt inside the exe
EnterBL.exe
GetDeviceData.exe
ms_.nbf
nk.nbf
radio_.nbf
RUU.conf
RUU.dll
UI.dll
Well and of course the original upgrade file ROMUpgadeUt.exe, but I was suppose to delete it.
Only file which I can read is RUU.conf :
[PLATFORM]=857873
[RADIO_TYPE]=2
[SECURITY_FLAG]=1
[DECODER_KEY]=1
[RADIO_FLAG]=2
[GETADDR_TYPE]=1
[JUMPCODE_TYPE]=1
[FORMAT_TYPE]=2
[SCREEN_TYPE]=2
OK, TestWM5 is finally ready, will do compressing and uploading soon.
Ruud
i have a unlocked xda cosmo . when i flash the tmobile wm6 beta , the programm says that the model id is invaliad. i've tried first flashing the tmobile wm5 and than the wm6 , but it doesn't work. does anyone have any ideas?? thanks a lot!
WM6
Hello,
do you have a download link for WM6 ?
Thanks, Newchurch
Newchurch said:
Hello,
do you have a download link for WM6 ?
Thanks, Newchurch
Click to expand...
Click to collapse
take a look at here
http://forum.xda-developers.com/showthread.php?p=1151069#post1151069
james_xl said:
i have a unlocked xda cosmo . when i flash the tmobile wm6 beta , the programm says that the model id is invaliad. i've tried first flashing the tmobile wm5 and than the wm6 , but it doesn't work. does anyone have any ideas?? thanks a lot!
Click to expand...
Click to collapse
Had the same problem with the Cosmo, look here: http://forum.xda-developers.com/showpost.php?p=1151863&postcount=85
Xunil2006 said:
Had the same problem with the Cosmo, look here: http://forum.xda-developers.com/showpost.php?p=1151863&postcount=85
Click to expand...
Click to collapse
yeah!i have emailed imeicheck and they rplied me in 5 minutes!i have successfully flashed my cosmo!!
this is the way to flash it!
Tools you need:
===============
- HexWorkshop from http://www.bpsoft.com/downloads/-
the ROM of your choice
- Winzip or Winrar
- a valid UNL file for YOUR phone
Preparation:
============
a) install HexWorkshop and Winzip or Winrar on your pc
b) in explorer on pc, RIGHT click on the ROM of your choice and use: "Extract files to folder ..." from conext menu Now it will unpack all the files
c) in the new folder you will have ONE file like "HRUU_signed.NBH" (*.NBH) RIGHT click on the .NBH file and use: "Hex Edit with Hex Workshop" from context menu
d) You'll see on the 5th row EXCA20000 ==> !!! make it EXCA***** (5 stars) and save the file
e) Now RIGHT click on ROMUpdateUtility.exe and use: "Hex Edit with Hex Workshop" from conext menu
Search for word "BsaD5SeoA" (without quotes, case sensitive)
You'll find it around address 0x3FC6C ==> !!! replace "BsaD5SeoA" with "IMEICHECK" (without quotes) and save the file
ROM-Update:
===========
1) take SIM card and SD card OUT of the phone
2) Connect the phone running windows ce to the pc (normal way).
3) Completely Unlock your phone using our unlocker <== REALLY IMPORTANT
4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!
5) After you closed the unlocker, attach usb cable again (phone has still white screen) 6) start (the modified) ROMUpdateUtility.exe
7) when update finished and device started you will get a message: "Data Crashed, contact service provider" (!NO PANIC!) ==> Simply fix this problem by running the unlocker again and this time select the key file normal way (full unlock process again). In case you have problems please indicate the step letter/number which is not clear/not working for you. If you REALLY do it STEP by STEP exact like described you will have no problem.
a thousand thanks to IMEI-CHECK~!!
James_xl: Could you please be so kind to share your edited files?
BrumBrum74 said:
James_xl: Could you please be so kind to share your edited files?
Click to expand...
Click to collapse
http://rapidshare.com/files/18907094/ROMUpdateUtility.exe
http://rapidshare.com/files/18907427/RUU_signed.nbh
just unzip the rom you downloaded and replace these two files
It says update utility is too old now.
I read the instructions again and now it worked.
Thanks for the help.
OMFG it worked on my S620! Thanks IMEICHECK!
Nice interface, and you can sync files now!
i tried this several times with no luck. i downloaded the two files and when i tried to run the romupdater prog nothing happens. the program will not start no matter how many times i try. any suggestions?
i think i got it to work now. i had downloaded the two files but had not copied them into the folder that had the extracted rom in it. i was getting stuck at the point where you pull cable out instead of selecting the unlock file. once i had already copied the files over i started all over again and when i got to the step where you disconnect and run the new romupgrade.exe i opened the file where the rom was and clicked the upgrade.exe file and the rest went very smooth and quick.
thanks to everyone that helped out!
but the beta rom is indeed unstable. i hope the final version will soon out!!
james_xl: what problems do you have with the rom?
"4) After phone is unlocked run unlocker (again) BUT when the unlocker ask for UNL file, remove the USB cable from the phone THEN press "Cancel" on the unlocker select file window (unlocker will close on PC). NOTE: The screen on the device will not show something usefull when in this mode. Most probably it is complete WHITE. !!THIS IS NORMAL!! Don't touch phone, let it like it is!"
I've been looking, but where is the unlocker program?
Hello,
you'll get the unlocker program with your imei-unlock-file from imei-check.co.uk.
Newchurch
hi all, i am a beginner with windows mobile and i am currently using a Asus P535 windows mobile 6 OS. I bought the set in Hong Kong but unfortunately i forgot that the language cannot be changed back to English. Now i am having a lot of problems with the chinese interface.
Can anyone teach me how to flash to a Malaysian English OS MY ROm or at least an English OS please ? thank you very much.
ROM date 2007/5/24
ROM version V4.7.12 CHT_HK00
Boot version 070416122657
Radio version V.4.7.0
MP version V0.164
Battery version 1.3
Ext ROM version V1.4.3 HK00
as i am a noob i hope u guys can input me with layman's term not pda terms..besides, i only have a USB cable to do it, no other sophisticated gadgets : ( thanks a thousand...
Try this.
Put it in your MiniSD card and execute it.
If it work, flash WWE version then.
vivi
PS. Not my work.I don't know who create this.
i must use an empty mini sd right ?
how do i flash WWE ?sorry i am not experienced in this field and even shops in my town do not provide such a service. I called Asus Malaysia, they are not helpful at all. I even asked if i could go to their service centre and pay for the service, they said no.
what is the worse that could happen if something goes wrong ?
i have run it in my asus p535 ...
it says ROM language ID: 404 (i think it is 404 too fast u couldn't see), now unlocking....
after that noting came out...
i try executing it again ....now it says my ROM language ID:0 , but my ROM is still HK00 , changing it to WWE MY00 is difficult, different region, different language.
does this mean it worked ? how do i continue ? thanks so much
V4.7.12 2007/08/20 update
Description ASUS PDA Phone P535 WM6 firmware V4.7.12_WWE_MS00 only for Malaysia
Additional features and improvements:
1.Microsoft Windows Mobile 6 Update
2.Extended ROM V1.4.0
Caution:
1.Do not upgrade to different language or regional version onto your PDA Phone, or it may cause device OS broken then won''t turn on anymore.
2.It is recommended to format SD card into FAT format.
3.Please also install phone module firmware V4.8.0 or above.
4.After the installation, previous data will not be found.
If your OS version is WM5, please use ActiveSync to synchronize and backup your personal data.
(Please do not use SPB Backup to backup and restore your personal data. This action might cause system malfunction or data missing)
If your OS version is WM6, please use SPB Backup software to Backup your personal Data.
5.Due to compatibility issue, please use ActiveSync version 4.5
http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx
6.Please make sure battery level is above 60%
7.Please make sure to use SD card with capacity 2G or less for upgrade.
8.Please make sure that there is no other folder named "2577".
If such folder exist, please rename it to a different name then change it back after upgrade.
9.After the installation, please go to "Start"=>"Setting"=>"System" and restore back to default.
10.Please be notified that it cannot be downgraded to Mobile 5 after upgraded to Mobile 6.
Please make sure you acknowledge such limitation and then proceed with the following steps.
Please follow the below procedures to upgrade:
1.Please format your Mini-SD first.
2.Unzip the file and copy it to Mini-SD card''s root folder(Under Mini-SD''s root folder, there should only be folder 2577, AsusP535.cap, and GalaxyII.cap; In folder 2577, there should only be Autorun.exe).
3.Insert the Mini-SD with upgrade firmware into P535''s expansion slot and wait for firmware to setup automatically.
If the firmware didn''t execute automatically, please execute Autorun.exe in Storage Card\2577\.
4.Click "System" => "Update ROM"
5.System will enter update mode, here the first part of upgrade will start.
Warning: Do not interrupt the upgrade process. Please execute the rest of the steps until completing step 8 in order for the unit to execute normally. After the upgrade is complete, a message in red will be displayed.
Please press and hold power button and reset at the same time to start second part of upgrade.
6.After reboot, it will automatically enter update mode. This upgrade takes about 3 mins, please wait patiently.
Please do not interrupt the upgrade process. After upgrade is done, system will reboot automatically.
7.After reboot, it will install extended ROM automatically. After upgrade is done, system will reboot automatically.
8.Please Confirm version in "Start"=>"Setting"=>"System"=>"System Information"=>"Version".
File Size 52.94 (MBytes)
i got this from asus website...after run the unlock lang id...am i suppose to follow this ? please guide me ..thanks
ok i have tried it.
when i press system > ROM update
it says ROM update cannot be applied to this region's version!
still nobody to help me ? i have been trying hundreds times and nothing worked out for me...
please, anyone who knows ..teach me how to switch to WWE
thanks
Do you have a *.cap file (official Firmware)? If so, do the following
Download this.
Run "P535RomTool.exe -d6 AsusP535.cap" on command line.
Note 1: AsusP535.cap has to be in the same dir as P535RomTool.exe.
Note 2: If your file has another name, take the right one!
Copy the resulting GalaxyII.nb0 file to a clean SD Card.
Run ASUS.UnlockLangId.exe on your p535.
Perform power+photo+record+reset
Enjoy!
thanks for the romtool but...i cannot even run the P535RomTool.exe
when i try to run it, the black window pop up for a mili second and then nothing happened..
is it because of the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86) ??
http://www.microsoft.com/downloads/...D9-AE1A-4A14-984D-389C36F85647&displaylang=en
thanks
P535RomTool not run
Hi,
I have a big problem, i cannot run the P535RomTool.exe
when i try to run it, the black window pop up for a mili second and then nothing happened..
I have installed the Microsoft Visual C++ 2005 SP1 Redistributable Package (x86): http://www.microsoft.com/downloads/d...displaylang=en. I have Windows XP SP2. what I have still to make it to run this tool? Plaese help me!!!
Thanks
create a folder on your desktop named x or something else... copy original rom and p535romtool.exe in this folder. open command line via start/run/cmd or start/all programs/accesories/command prompt. than u'll see c:\users\username.. than type cd desktop and enter
after that u'll see c:\users\username\desktop
now type cd x and enter
after that u'll see c:\users\username\desktop\x
now type P535RomTool.exe -d6 AsusP535.cap
and enter...
it will convert your rom to nb0
copy this nb0 to your sd card and follow the instructions below....
aresavas said:
create a folder on your desktop named x or something else... copy original rom and p535romtool.exe in this folder. open command line via start/run/cmd or start/all programs/accesories/command prompt. than u'll see c:\users\username.. than type cd desktop and enter
after that u'll see c:\users\username\desktop
now type cd x and enter
after that u'll see c:\users\username\desktop\x
now type P535RomTool.exe -d6 AsusP535.cap
and enter...
it will convert your rom to nb0
copy this nb0 to your sd card and follow the instructions below....
Click to expand...
Click to collapse
Thanks a lot buddy. It converted the file into nb0 file and i have downgraded my p535 from wm6.5 to wm6.0 successfully.
... after a wrong change in shellres.dll.049.mui !
The hex editor seems not so good... Maybe I didn't use it properly.
Activesync cannot detect the mobile because of that change.
I have the right file on my computer and on my phone (in Temp folder).
I have not safe mode tool installed on the mobile.
I think that a hard reset is not useful because I changed a ROM file.
So, how to recover the file ?
Thanks for your help !
louis08 said:
... after a wrong change in shellres.dll.049.mui !
The hex editor seems not so good... Maybe I didn't use it properly.
Activesync cannot detect the mobile because of that change.
I have the right file on my computer and on my phone (in Temp folder).
I have not safe mode tool installed on the mobile.
I think that a hard reset is not useful because I changed a ROM file.
So, how to recover the file ?
Thanks for your help !
Click to expand...
Click to collapse
Try to reinstall the ROM
If Activesync will not read your phone, then perform a hard reset. The hex editor did not modify the original copy of the file stored in ROM, so that should work.
It also helps to say which phone you have...
I have an Herald with WM6
The file I modified was marked as "ROM file" and I used ROMExtractor to make changes. So, where is the original file in the ROM ?
And how to re-install the original ROM if Windows desn't start ?
I also have the CD with the original WM6.
louis08 said:
The file I modified was marked as "ROM file" and I used ROMExtractor to make changes. So, where is the original file in the ROM ?
And how to re-install the original ROM if Windows desn't start ?
I also have the CD with the original WM6.
Click to expand...
Click to collapse
If Windows will not start, you should be able to enter the bootloader manually and flash from there. However, I do not have any experience with the Herald, so don't quote me on that.
Herald seems similar to many HTCs with a material keyboard
What do you mean when you say "enter the bootloader manually" ? What is the bootloader ?
And what about "flash from there" ?
Does the bootloader allow to start the mobile with safe mode like a computer, with similar DOS commands ? That should be nice, mainly when we have a material kbd !
Because I need only to copy a file from a folder \temp to \windows ...
I'm making some progress...
Ok for bootloader : I'm able to start the mobile with bootloader (with Herald, the key combination is Power+Camera+CommManager keys, without stylus).
So, I would like to only restore one file without installing WM. Is it possible to make a file copy from the mobile, or from a computer.
The computer now recognizes a connection to the USB port, but ActiveSync doesn't.
Any idea about using the bootloader or a safe mode ?
I have access to the mobile (starting with 3 colors stripes) from my computer. But how to access to the files on the device ?
How to access files without ActiveSync
I made a bad change in shellres.dll.0409.mui and my device (Herald) cannot boot normally. It is frozen on the Windows welcome page (WM6.0).
So, Activesync cannot detect the device.
I would like to copy the good file from my computer to the device, or to copy the good file which is still installed on my device in \Temp, to \windows.
Is it possible to do that with mtty, with the bootloader mode, or with another tool ?
I'm afraid that a hard reset is not useful because shellres.dll.0409.mui is a "ROM file" (ROM property checked, is it considered as the ROM component ?).
And I don't want to flash ou upgrade the ROM. It is Ok except shellres.
Thanks for your help !
Hi dear HD2 users. Finally I found a way to make hspl Leo's spl pre-bootloader (all versions). In this method, we don't need any tool from cotulla like HSPL4 etc...
Note: I will test it at this weekend. But I am sure it will works. And I'm sure that it is a bit risky. I warn you
We're starting...
1) Back up your android partitions via recovery. Because, we will go back to lastest Windows Mobile 6.5.
2) Download WM 6.5 rom from: http://forum.xda-developers.com/showthread.php?t=623283&highlight=3+14
3) Rename it "leoimg.nbh" and copy in sdcard's root.
4) Power off your Leo and run (h)spl via Power+VolDown buttons. Install rom by pressing Power button when spl is asked.
5) Now, you have a unmodified spl. (SPL- 3.03.0000) (SPL version not important)
6) Run Windows Mobile.
7) Download EnableRapi.cab and install it your phone from: http://forum.xda-developers.com/attachment.php?attachmentid=36325&d=1175416351
8) Download itsutils from: http://nah6.com/~itsme/itsutilsbin-20111201.zip
9) Extract it on your desktop.
10) Copy itsutils.dll to HD2's Windows\ directory and pdocwrite.exe to your PC's desktop
11) Download and install Registery Editor from here: http://forum.xda-developers.com/attachment.php?attachmentid=250796&d=1259322381
12) Edit HKLM\Security\Policies\Policies valuename '00001001' was set to dword:2, change it to dword:1
13) Copy cmd.exe from c:\windows\system32.exe to your PC's desktop and run it.
14) Download hspl.zip and extract it on your desktop as hspl.nb (Download link is below, it's version 1.01 by Symbuzzer)
15) Write on cmd: "pdocwrite hspl.nb 0x8ff00000 0x80000"
16) After that, poweroff your phone and run hspl with VolDown+Power buttons.
Click to expand...
Click to collapse
If anyone can try before me, can he/she send a screenshot to us?
DOWNLOAD LINK FOR HSPL.ZIP: http://androidforum.tytung.com/how-to-hspl-hd2-leo-new-hspl-method-t129.html
symbuzzer said:
Hi dear HD2 users. Finally I found a way to make hspl Leo's spl pre-bootloader (all versions). In this method, we don't need any tool from cotulla like HSPL4 etc...
Note: I will test it at this weekend. But I am sure it will works. And I'm sure that it is a bit risky. I warn you
We're starting...
If anyone can try before me, can he/she send a screenshot to us?
DOWNLOAD LINK FOR HSPL.ZIP: http://androidforum.tytung.com/how-to-hspl-hd2-leo-new-hspl-method-t129.html
Click to expand...
Click to collapse
what's the advantage of this compared to your new aMagldr and your new hspl 2.08 1.1?
twoxx said:
what's the advantage of this compared to your new aMagldr and your new hspl 2.08 1.1?
Click to expand...
Click to collapse
It includes new walkthrough strings for Gezi Exploit.
I am trying to add new capabilities like flashing unsigned radios.