Ok, built a new app phone switcher (flight mode on/off) based on the cell tower location.
System automatically switches the phone OFF based on the time you set when you are at predefined location (Say Home). When you are at home, say from 10:00 PM to morning 6:00 AM no one can call your mobile. But if you are not at home, then phone is ON even at night. This also saves your battery life and privacy too.
It is working on Hermes, and I have tested it on WM5 emulators. Will NOT work on WM2003.
Please check the link to the application under my signature.
I have a question, can it only change to "vibrate" instead of turning off the phone? That would be more appropriate for me. Thanks for your answer
Nice App! How about changing call forwarding (when busy, no answer, etc...) baased on location?
If the phone could forward all calls automatically, or forward when you press "hang up" based on location it would safe battery and reduce radiation using the phone.
szturchen_pl said:
I have a question, can it only change to "vibrate" instead of turning off the phone? That would be more appropriate for me. Thanks for your answer
Click to expand...
Click to collapse
Nice Idea!, I will do my homework to find out what it takes to do that
ahlok_hk said:
Nice App! How about changing call forwarding (when busy, no answer, etc...) baased on location?
If the phone could forward all calls automatically, or forward when you press "hang up" based on location it would safe battery and reduce radiation using the phone.
Click to expand...
Click to collapse
Since the application do not keep polling for location, if it does not know the current location for some reason(reason = In the original post) then there might be problems such as wrongly 'forwarded' calls...
But its a great idea. I keep it in mind
past 21:00 hours
does not seem to work if you go past the apointed hour? radio stays connected
david.dupuis said:
does not seem to work if you go past the apointed hour? radio stays connected
Click to expand...
Click to collapse
Are you saying.. You were not at appointment time at sleeping location... And you came in late... and the phone does not turn off?
If so it is by design.. As i am not keep polling to find out the locaton. Just because then the application has to be running in the background or keep getting activated say for every 5 Minutes.
But let me know if you are saying the samething too.
not shutting off past sleep time
I think we're saying the same thing. Last night I installed the software set the home location and set the sleep time to 21:00 to 6:00. Actual time was 22:00. I expected it to shut down the radio and it did not.
Hi,
does not work for me
Install works fine, Test is OK, device went on Flight Mode and Back.
I set Sleep Location and Times and clicked Enable button.
When I want to save an error occurs lile: "InvalidCastException at Save. Please report this!"
The settings won't be saved then. I tried to manually edit the cnf file with
found cell values and True State, and saved this back to device, but when
time comes, nothing will happen.
I am on Schaps WM6 3.57a german and O2 Germany Provider.
What I was found out is, everytime I start the program it
randomly changes the location behind the dot.
Once it is xxxxx.8311 and the next time it is xxxxx.48311
May this be the culprit?
Any suggestions welcome bc I would really love this tool working
Olioaglio
david.dupuis said:
I think we're saying the same thing. Last night I installed the software set the home location and set the sleep time to 21:00 to 6:00. Actual time was 22:00. I expected it to shut down the radio and it did not.
Click to expand...
Click to collapse
OK for this i have to implement a constant polling mode.. Which i will do it for next release.
Olioaglio said:
Hi,
...The settings won't be saved then. I tried to manually edit the cnf file with
found cell values and True State, and saved this back to device, but when
time comes, nothing will happen.
...Once it is xxxxx.8311 and the next time it is xxxxx.48311
May this be the culprit?
Olioaglio
Click to expand...
Click to collapse
If you don't mind can you send me your cnf file?
Since your Location keep fluctuating... May be its failing to ON/Off
So when you are at home (Sleep Location) and if you keep refreshing the location (Button Refresh Location) you are getting diffent values?
Let me know
Something similar, sort of
I use Teog's CallFilter instead. What I like about it is that I can set the filter to only allow calls through from specific people. This way if there's an emergency in the middle of the night I'll get the call. It doesn't work on a schedule, you have to run it when you want it and disable it when you don't. But it is a simple app that runs with just a click after it's configured and has worked over several different operating systems. Would work well for meetings, movies, etc. too.
tytnguy said:
If you don't mind can you send me your cnf file?
Since your Location keep fluctuating... May be its failing to ON/Off
So when you are at home (Sleep Location) and if you keep refreshing the location (Button Refresh Location) you are getting diffent values?
Let me know
Click to expand...
Click to collapse
Check PM
Olioaglio
Hi tytnguy,
thanks for fast PM. You were abolutely right with the idea of interfering date format. I customized my HTC Home with the SDTe Override string (by HTCustom Proggie) to display the week day, which turned out to be the culprit that your prog did display the error message at Save.
So I deleted this in registry and the app now saves without a glitch. So I set the time (1 minute in the future) again and saved. When the time comes, the turning wheel appears, but nothing happens. I figured out, that the Status page says: "Out of location so NOT switching off the phone", so this is maybe, why the program starts but do not turn to flight mode as suggested.
Since I set the home location and did not even move a meter from this position I cannot imagine, why it does display I am not in the sleep location?!?! Any ideas
Olioaglio
edit: It WORKED now for the first time !!!! Great!!
Just wondering, what happens when I just do the phone in another room in my flat, where maybe it is in another broadcast cell....
Think, it won't work then!! Is it possible to create, let's say, kind of a radius, where the program activates??
So my sleep or home location is maybe a bit more then just one room or even my desk
edit 2: May it work, if I set the SDTe string to override again, after saving correctly? Or will the app then stop working again? Sorry for those dumb questions though.
Thanks anyway!!! Great program!!
tytnguy said:
OK for this i have to implement a constant polling mode.. Which i will do it for next release.
Click to expand...
Click to collapse
Would constant polling mode affect the battery drain significantly?
If yes, I would suggest a check box in your proggy to toggle this option on/off
Just my 2 cents
Olioaglio
Olioaglio said:
...what happens when I just do the phone in another room in my flat, where maybe it is in another broadcast cell....
May it work, if I set the SDTe string to override again, after saving correctly? Or will the app then stop working again? Sorry for those dumb questions though.
Click to expand...
Click to collapse
Olioaglio,
Can you set the home location from the other room?
If you change the date format to someother non standared format it will not work. Since program needs to keep saving the stuff on each try.
Update 1.0.1
Multiple location on the schedule: If you want to set more than one location as you 'Sleep Location' you can do it now. On the sleep location box bring the context menu up, and choose 'Append to location' now add the new location to the list. You can add any number of sleep locations!
Now if you were not at home at set time, system will keep polling based on the poll time you specify. So as soon as you reach home your phone will be switched off.
If you turned on your phone manually after the rk-Sleep set it to flight mode, then your phone remains on till next scheduled sleep session
Olioaglio said:
Would constant polling mode affect the battery drain significantly?
If yes, I would suggest a check box in your proggy to toggle this option on/off
Just my 2 cents
Olioaglio
Click to expand...
Click to collapse
Olioaglio,
No it should not make any significant affect on the battery.
I have programmed it to poll only on sleep time if you are not at home. But since I am not running the program in the background, it is ok.
The new update I release just keeping your problem in mind. So you go to both your rooms where you get different towers. Update both as your sleep location.
tytnguy said:
Olioaglio,
No it should not make any significant affect on the battery.
I have programmed it to poll only on sleep time if you are not at home. But since I am not running the program in the background, it is ok.
The new update I release just keeping your problem in mind. So you go to both your rooms where you get different towers. Update both as your sleep location.
Click to expand...
Click to collapse
Thanks, will monitor it...
Olioaglio
UPDATE:
OK, tested it now... Dude, the 1.0.1 really works like HELL!! I'm totally satisfied for now.
The Append function is very good thing, since I found 8 (!) different cell locations (about 3 with GSM and 4 with 3G) in my 3-room flat. They are always fluctuating even at the same place, so maybe this was the problem of the others, who tested the program with having only one location saved. But with the Append function AND the new Poll function (which also works great), it absolutely ROCKS!! Had no problem with several tests. Battery consumption with poll function really does NOT seem to be more than without poll.
Just some suggestions if you plan to make updated release. The Append function is not easy to find, I had to read your instructions three times to get it. Maybe you'll find another way. Also an extra tab with a list of all appended cells would be appreciated.
I would have another idea for an "extended" flight mode. Maybe you could add some checkboxes for Phone, Bluetooth, Wlan and Beam for - lets say - "Extended Flight Mode" options. So one could save even more battery as with just the phone function off. With the checkboxes you would have the choice what to turn off/on, when rk-Sleep will engage.
Best regards,
Olioaglio
tytnguy what about vibration mode? have you had time to check into that? Regards
my tmo tp2 not displaying the right time. If i turn the phone on & off it comes back, has anyone seen this? did a search here nothing has come up.
no one else has had this problem w/ the tmo version?
Make sure you have it set for the right timezone. go to "setting, all settings, system, clocks and alarms" then set your time zone up...Tj
yeah, time zone checked, right city too... still, ugh................
Hmm I'm stumped ...Tj
How far off time is it? 5 minutes, 1 hour, several hours? Is it consistently that far off? If you're turning it off and turning it back on it sounds like it's pulling the time from the tower. Try going into the "Phone" settings (start, settings, personal, phone), go to the TIme Zones tab and uncheck Automatic change time zone and clock option.
Toleraen said:
How far off time is it? 5 minutes, 1 hour, several hours? Is it consistently that far off? If you're turning it off and turning it back on it sounds like it's pulling the time from the tower. Try going into the "Phone" settings (start, settings, personal, phone), go to the TIme Zones tab and uncheck Automatic change time zone and clock option.
Click to expand...
Click to collapse
Perfect..I was having a similar problem, thanks!
I had this issue last night. The time was off by 2 hours. I unchecked the setting as suggested in the above thread.
Toleraen said:
How far off time is it? 5 minutes, 1 hour, several hours? Is it consistently that far off? If you're turning it off and turning it back on it sounds like it's pulling the time from the tower. Try going into the "Phone" settings (start, settings, personal, phone), go to the TIme Zones tab and uncheck Automatic change time zone and clock option.
Click to expand...
Click to collapse
it could be 15~45 minutes off, i have seen that type of variation.
I noticed that the LiveDisplay setting is not turning on by itself if set to automatic. At first I thought it was a bug in the ROM, but after searching around a bit, I found out it requires location to work. It uses our location to determine sunset and sunrise times, and activate/deactivate LiveDisplay accordingly. Correct me if Im wrong here.
My suggestion would be to make this setting user configurable in a way that we can manually set start/stop times of night mode. First of all because we might want to turn if on/off at different times, secondly because having GPS turned on drains battery. Or give an option to use either user set hours or GPS.
Considering the magic the guys usually do, this could be implemented in a matter of hours, and would benefit the users and battery life.
Note: Before some smart ass gets to say "its open source, download and do it yourself" - I do want to do that, I am a developer, but currently I have limited hardware to build LOS and will get to it after I upgrade it.
I second this as in the UK the sun doesn't set till really late.
I found a workaround for this issue as there is still no option to set sunset and sunrise time manually. The workaround is the automation app Automagic . It supports setting of LineageOS System Settings since version v1.36. Root is requiered. In the app you have to look for Lineage OS System Setting "display_temperature_mode" (Value 4- Auto, Value 2 - day).