WIN 6.5 and Hardspl - Touch Pro2, Tilt 2 Windows Mobile General

Guys,
I'm new to this web site and am trying to reflash my Touch Pro 2 with the Win 6.5 version. It won't load as previously reported by others, with the fix being, using Hardspl(whatever that is). In trying to download the zipped version of Hardspl from this site, Norton Antivirus rejects it as being infected.
Any assistance here please?

We need more info about your phone, and what you have tried.

I don't know how much info you need but it is an unlocked Touch Pro 2 phone, ROM Version 1.19.401.0(51489), ROM Date 05/16/09, Protocol version 61.32t.25.26U, CPU QUALCOMM(R) 7200A, Model no. HTC Touch Pro 2 T7373.
I downloaded the Europe version of the update from this site RUU_Rhodium_S_HTC_Europe_1.86.401.0_Radio_Rhodium_4.49.25.17_Signed_Ship(2).exe and tried to reflash the phone, having achieved sync. An error message " ERROR(294) : INVALID VENDER ID" comes up, telling me that "This update utility cannot be used for your PDA phone."
I have subsequently seen on this site that a fix was to use Hardspl.
After searching on Xda, I found this download "Rhodium-HardSPL_V2_00R3_185HSPL.zip".
When I try to unzip it I get a message that it is blocked by Norton "Auto protect has detected Bloodhound.W32.EP"
So nothing can happen under these circumstances. What is this Hardspl and why is it necessary?
Would a hard reset help?
Any assistance will be greatly appreciated.
Kind regards Chris
PS Radio version 3.46.25.30

to say it as simple as possible:
your phone has ID, called CID
normal phones only allow ROMs with same CID
HardSPL allows any ROM, skips checking of th CID
positives: you can use ROMs for different parts of the world, debrand your device (not SIM unlock!) and also use unsigned ROM (ROMs that have been modified)
negatives: if you are stupid you can flash a ROM for completely different device and brick your phone, you should put it to previous state before any warranty repairs (to do this first flash original ROM and then remove HardSPL)

As stated in the first post of the Hard SPL and the "Noobs flashing guide" the virus is a false positive.
We were all noobs at one point or another, just take your time to read the stickies about how to flash your device, then upgrade to the 6.5 ROM (or any other custom TP2 ROM on this fourm).
EDIT: Any more problems, please post in the "for noobs" thread.
Thanks
Dave

Related

WM6 update problems with Hard SPL [communication error]

A lot of us are experiencing a misterious error ("communication problem") while trying to update HTC Trinity with an official WM6 ROM update (one of those released out of Europe) using Hard SPL as a way to bypass CID checking.
Anybody has found a workaround?
I dont see how a communication error can occur while an official ROM mounts correctly - I tend to think that HTC has added some extra checking of the installed SPL version and comes out with a deliberately confusing error message.
Help is needed!
Thanks to you all.
My Trinity has italian ROM and I mount HardSPL 1.3 for bypassing CID control (SoftSPL or HardSPL 1.2 simply dont work as the HTC update procedure simply reinstalls the original SPL).
are you running Vista? If so that causes communication errors.
No, I use XP. And as I said the problem doesnt show up with the original WM5 ROM version, only with the latest WM6 ROM.
have you tried using the modified RUU of the official update?
No and I dont know what kind of modification do you mean!
I am not so much willing to install cooked ROMs unless I know what is in there.
Still waiting somebody to understand the nature of this "communication error" and how to overcome it ....
is there a number code by the error?
basically, the official ROMs gave a lot of people trouble to install.. something to do with the new RUU and hard-spl or something... so people took the nbh file out of the new installer, and put it in the old installer (no ipl, spl, etc) and it seems to work like a charm. It's not cooked.. still official..
i was thinking it might fit your needs, since you weren't wanting your hard-spl to be overwritten by new bootloader anyway...
Thanks, I will try to do as you suggest as soon as I have time to do it!
Concerning the error code I dont remember, I will note it next time ... anyhow it is a strange message, I dont see how a communication error can occur in that situation (some people suggests it is a comm problem PC<-->Trinity, I dont see how it could happen only with the new RUU).
About modified bootloaders, SoftSPL and HardSPL 1.2 do not work (the RUU install just wipes them away); HardSPL 1.3 stays there - not sure his presence is part of the "error" (as the HTC guys could easily detect its presence in their update routine).
Finally I dont understand why HTC is not giving away Trinity WM6 to all customers worldwide - again I dont belive there are "radio" differences between Asia/Australia and the rest of the world - it must be some marketing decision against the interest of customers (the may even wait to have it in all european languages - but why not in english at the beginning?).

ROMs for the Diamond from HTC

Hi,
Does HTC release their own updated ROMs for the Diamond???
If so where can I find them and how do I update the device (does HTC have instructions on the web)??? Also what is the latest ROM version (I think I have 1.37.0 WWE), my phone came from Hong Kong...
Thanks,
NW
NightWolf88 said:
Hi,
Does HTC release their own updated ROMs for the Diamond???
If so where can I find them and how do I update the device (does HTC have instructions on the web)??? Also what is the latest ROM version (I think I have 1.37.0 WWE), my phone came from Hong Kong...
Thanks,
NW
Click to expand...
Click to collapse
Try reading the rules here before posting!
Also, get familiar to using forum search and also google search.
oh no...
not someone who and use the search button
i have tried the search function!
i cannot find a concrete answer as to if htc has actually got a download page with the roms or if we need to use the rom 1.93... and this hard spl program...
fyi when searching i found many ppl asking the same qus as me yet there was no answer other than a few wasteful people saynting use the search function... if u do know the answer dont be Arrogant and say use search - the onlynthing u are doing is wasting ppls time and increasing ur post count. i asked for some help if u dont have anything useful to add dont post...
thanks
www.htc.com - E-club
It's in your phone manual as well.
Riel said:
www.htc.com - E-club
It's in your phone manual as well.
Click to expand...
Click to collapse
HTC e-club doesn't have roms for diamond - not on Hong Kong where I login anyway.
Thanks for the reply Riel/Tim, I have been to that page and enter in my SN and register but when I go to my device nothing comes up... I cannot see the Diamond listed under software downloads either..? I log into world wide...
Thanks for the reply, I have been to that page and enter in my SN and register but when I go to my device nothing comes up as well... SO I'd say HTC havent release any ROM device updates... SO how do you guys get the exe for the diamond v1.93???
Also to install the 1.93 ROM posted by Tom do I need to install HardSPL on my phone..? Because it looks like that package will work with no need to install any SPL, its just an exe that runs through a wizard... What way/how does the HardSPL versions here prevent me from bricking the phone? How do I find the SPL version that is currently on my phone and can I revert back to the original SPL/remove hard CID so I dont void warranty..?
Tim what ROM are you using on your Diamond and how did you install it???
Also does the ROM posted by Tom have the Radio ROM (I think its 1.00.25.5 inc in the package guessing by the file name?) let me use Quad band network?
HTC does release the updates, but not on their site. Only to their resellers I believe.
Yes, it is essential to install hard SPL on your phone for any ROM you want to try. I am using walshieau's Elite 3.0 ROM 9 (which is very quick). This is what I did to install it:
1) Flash hard SPL signed version (which will hard reset your phone, so backup using PIM backup from pocketpcfreewares.com)
2) Flash the ROM of your choice
After this I decided to update the Radio to version .05
In order to do this I needed to first flash with UNsigned hard SPL, then flash the radio using CustomRUU. Now I have support for Telstra's NextG 850Mhz.
NightWolf88: check your PM and you can contact me by phone and I may be able to explain in more detail.
Thanks very much for the help Tim!!! Thanks to all the other people doing great work on these forums!!
Ok so from what I have read so far ( I posted this in the 1.93 ROM thread as well - http://forum.xda-developers.com/showthread.php?p=2416200&posted=1#post2416200) I just need some of my noobish questions answered, dont want to ruin my lovely Diamond :
From what I have read:
1. Backup device - Is there any way I can backup the ROM which is currently on my device (1.37.00.0 WWE)???
2. Upgrade to HardSPL signed as this is a signed ROM- download this file http://forum.xda-developers.com/showthread.php?t=400402 extract, run the .exe file... Follow the RomUpdateUtility.exe (RUU) wizard - SPL will flash and then with any luck get a message saying complete - job is done.
What does "1. do not try to use this SSPL to flash anything else other than an SPL file. it explicitly blocks other flashes anyway. SSPL is *never* a good way to flash OS images" mean... So can I not use this to update the device OS ROM to 1.93. in this thread??? I assume SSPL = Signed Second Program Loader..?
Do I need to use this unsigned version..? http://forum.xda-developers.com/showthread.php?t=400950 - It has overwrite protection..?
Finally - use volume down & soft reset to see that SPL/bootloader has installed/flashed correctly... Then to SAFELY get out of the bootloader softreset again...?
3. Upgrade the OS ROM using the .exe file in post 1 of this thread...
So I download the exe connect my device via active sync then follow the rest of the steps in the RUU.exe wizard, it will give me a progress bar on both the PC and the Diamond, the Diamond will then softreset with the new rom all installed..?
Questions:
Can someone please confirm the above method is correct to install the ROM on this page?
Does the Radio also update itself to 1.00.25.05 when running the exe in the post #1??? I.e. will I get quad band radio support???
Do I need the signed or unsigned SPL what is the best to use???
How do I dump the ROM that is currently on my device to PC/whats the best program? Do I need to do this for warranty etc or if I dont like the new ROM..?
To restore to original SPL I go to http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39 grab my stock SPL and then use the unsigned SPL RUU exe? What is SSPL-manual used for???
Also in the post by cmonex (http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39) he says "if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that)."
What is the normal RUU process???
If I use the signed SPL I can just use the RUU.exe that comes with that and copy the stock SPL to replace the .nbh file in the signed Hard-SPL folder and everything should run fine? No need to worry with the unsigned Hard-SPL version right?
As stupid as it may sound I still don’t get all this SPL/SSPL/Hard-SPL stuff, what is on the phone originally? and what changes with hard-spl download packages??? I assume SPL is a boot loader like BIOS on the “PC” or EFI on Intel-Apple Macs..? What is the difference between the stock SPL/bootloader on the phone and signed/unsigned hard-SPL that some of the guys here have made?
Thanks once again ,
NW
NightWolf88 said:
Thanks for the reply Riel/Tim, I have been to that page and enter in my SN and register but when I go to my device nothing comes up... I cannot see the Diamond listed under software downloads either..? I log into world wide...
Thanks for the reply, I have been to that page and enter in my SN and register but when I go to my device nothing comes up as well... SO I'd say HTC haven't release any ROM device updates... SO how do you guys get the exe for the diamond v1.93???
Click to expand...
Click to collapse
Same problem here!
Yes, I did use the search function but didn't find what I was looking for.
That being said, I have registered my Diamond on e-Club. (It's a French Orange one, so I used a hack I found on another forum to correctly register by changing "HT825" to "HT826" in the SN.) However, I don't see anything for the diamond available for download under "Phone Software Updates" and "Other Downloads."
So my question is: does HTC offer certain downloads only to certain SN?
The answer might have been already posted somewhere; if so please redirect me (and NightWolf88) to the correct thread if you know it!
Thanks
PS: NightWolf88, check out www.modmydiamond.info if you haven't already: it's a fantastic tutorial that will most likely answer most of your questions regarding the fine art of ROM flashing and restoring.
Yeah I have checked that page, great site.
From what I have read there are no HTC e-club updates for the Diamond yet, only updates going to resellers... I also emailed HTC Tech support - I got this reply:
Thank you for choosing hTC. Please note that there's no new rom for HTC Touch Diamond at the moment. We recommend you to visit our hTC HK website for the latest information as below
Click to expand...
Click to collapse
I wish that HTC would pull there finger out and release an official ROM.
After putting an Official Rom update on the e-club site but then taking it down pretty quickly, it seems strange they haven't released one yet.
Im holding out for an Official Rom, but I think i will just give in and flash a cooked rom in the end.
Gonna try flashing the Radio first as I havent got an issue with the Rom itself, just with the signal behaving very erratically!
Will see.
Great site tho xda devs and also the modmydiamond one to, some invaluable info on both of them.
Thanks everyone on here.
On my SN and registration I definatedly got provided with a new rom.
It is 1.37 in my case, in Dutch.
See attachment of screenshot of the Site:
Riel said:
On my SN and registration I definatedly got provided with a new rom.
It is 1.37 in my case, in Dutch.
See attachment of screenshot of the Site:
Click to expand...
Click to collapse
Yeah it seems that only device SNs that shipped with <1.37 have an update, there is no offical release of 1.93 which is (from what I have read) better than 1.37, but 1.37 was alot better than the 34s and 35s if you do a search around the net alot of reviewers got sent these ROMs which fixed initial lag issues...
I want to put 1.93 on my device, wanted offical htc release but I'm just going to use the one posted here...
Any one hjelp me with the ROM update???
NightWolf88 said:
Thanks very much for the help Tim!!! Thanks to all the other people doing great work on these forums!!
Ok so from what I have read so far ( I posted this in the 1.93 ROM thread as well - http://forum.xda-developers.com/showthread.php?p=2416200&posted=1#post2416200) I just need some of my noobish questions answered, dont want to ruin my lovely Diamond :
From what I have read:
1. Backup device - Is there any way I can backup the ROM which is currently on my device (1.37.00.0 WWE)???
2. Upgrade to HardSPL signed as this is a signed ROM- download this file http://forum.xda-developers.com/showthread.php?t=400402 extract, run the .exe file... Follow the RomUpdateUtility.exe (RUU) wizard - SPL will flash and then with any luck get a message saying complete - job is done.
What does "1. do not try to use this SSPL to flash anything else other than an SPL file. it explicitly blocks other flashes anyway. SSPL is *never* a good way to flash OS images" mean... So can I not use this to update the device OS ROM to 1.93. in this thread??? I assume SSPL = Signed Second Program Loader..?
Do I need to use this unsigned version..? http://forum.xda-developers.com/showthread.php?t=400950 - It has overwrite protection..?
Finally - use volume down & soft reset to see that SPL/bootloader has installed/flashed correctly... Then to SAFELY get out of the bootloader softreset again...?
3. Upgrade the OS ROM using the .exe file in post 1 of this thread...
So I download the exe connect my device via active sync then follow the rest of the steps in the RUU.exe wizard, it will give me a progress bar on both the PC and the Diamond, the Diamond will then softreset with the new rom all installed..?
Questions:
Can someone please confirm the above method is correct to install the ROM on this page?
Does the Radio also update itself to 1.00.25.05 when running the exe in the post #1??? I.e. will I get quad band radio support???
Do I need the signed or unsigned SPL what is the best to use???
How do I dump the ROM that is currently on my device to PC/whats the best program? Do I need to do this for warranty etc or if I dont like the new ROM..?
To restore to original SPL I go to http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39 grab my stock SPL and then use the unsigned SPL RUU exe? What is SSPL-manual used for???
Also in the post by cmonex (http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39) he says "if you have signed hardspl, just go ahead and flash with normal RUU process (no overwrite protection in that one, as it is already only accepting htchackers signed files, there was no need for that)."
What is the normal RUU process???
If I use the signed SPL I can just use the RUU.exe that comes with that and copy the stock SPL to replace the .nbh file in the signed Hard-SPL folder and everything should run fine? No need to worry with the unsigned Hard-SPL version right?
As stupid as it may sound I still don’t get all this SPL/SSPL/Hard-SPL stuff, what is on the phone originally? and what changes with hard-spl download packages??? I assume SPL is a boot loader like BIOS on the “PC” or EFI on Intel-Apple Macs..? What is the difference between the stock SPL/bootloader on the phone and signed/unsigned hard-SPL that some of the guys here have made?
Thanks once again ,
NW
Click to expand...
Click to collapse

[REQ] The lastest rom for Australia "3"

HTC Touch Diamond ROM Upgrade for Hutchison ‘3’ network customers Date: 2008-12-09 Category: ROM Upgrade
An updated ROM is now available for HTC Touch Diamond users to download. As always, HTC is committed to providing customers with the best possible mobile experience. ROM version:1.93.861.4 Radio Version: 1.08.25.20
can anymore upload to this forums please, thanks for any help ^^
I'll second this request.
Ive tried to download this file but its not allowing me access to it.
Hi everyone. If you want the latest 3 Australia rom then you can get it rom http://www.diamond-dazz.com/Files/Three/RUU_Diamond_Hutch_AUS_1.93.861.4_Radio_Signed_Diamond_52.44.25.24_1.08.25.20_Ship.exe
I have tried installing that rom on my phone but it says that I have an invalid ID or something like that. Obviously it does not like my serial number. I tried putting HardSPL on my phone and still get the same error. It always happens at about 1 percent when installing.
Any ideas how to work around it.
dazz1975 said:
I have tried installing that rom on my phone but it says that I have an invalid ID or something like that. Obviously it does not like my serial number. I tried putting HardSPL on my phone and still get the same error. It always happens at about 1 percent when installing.
Any ideas how to work around it.
Click to expand...
Click to collapse
you need to cook the rom by yourself and need to manually update your radio
dazz1975 said:
I have tried installing that rom on my phone but it says that I have an invalid ID or something like that. Obviously it does not like my serial number. I tried putting HardSPL on my phone and still get the same error. It always happens at about 1 percent when installing.
Any ideas how to work around it.
Click to expand...
Click to collapse
You must flash Hard-Spl in your device, then it works!
dazz1975 said:
I have tried installing that rom on my phone but it says that I have an invalid ID or something like that. Obviously it does not like my serial number. I tried putting HardSPL on my phone and still get the same error. It always happens at about 1 percent when installing.
Any ideas how to work around it.
Click to expand...
Click to collapse
http://www.badongo.com/file/12470950
dazz1975 said:
I have tried installing that rom on my phone but it says that I have an invalid ID or something like that. Obviously it does not like my serial number. I tried putting HardSPL on my phone and still get the same error. It always happens at about 1 percent when installing.
Any ideas how to work around it.
Click to expand...
Click to collapse
I have Orange UK Diamond, NO HardSPL and i can flash any official roms with no issues.
I must say this 3 ROM is great, my standby time has increased greatly.
Try to unlock your phone, CID/Security than you will be able to flash any official rom, with out hardspl
Tried HardSPL and that does not work. I can put any cooked roms on there but not the official three australia firmware because of some CID or something like that. What is that 200meg file that you sent me a link to fooie.
Cheers
Darren
dazz1975 said:
Tried HardSPL and that does not work. I can put any cooked roms on there but not the official three australia firmware because of some CID or something like that. What is that 200meg file that you sent me a link to fooie.
Cheers
Darren
Click to expand...
Click to collapse
Just use 7zip and unpack the ROM, Take the NBH file out and rar it together with the Diamond RUU. Then flash it.
Thanks guys and gals for everything. I ended up using 1.93 for the HardSPL and it worked. 1.40 did not work. I aslo tried the 200 meg file fooie posted that worked. So both options do work.
Cheers
Darren
Original download link direct from HTC is still working for those that still want it -
http://forum.xda-developers.com/showthread.php?t=458047
Hi,
Can anyone please help provide some clear guidance on the following issues and questions:
I recently purchased a HTC Touch Diamond. It was purchased brand new and unlocked from a reasonably reputable Australian store, and is branded with the Australian carrier Telstra NextG, and appears to be running a customised Telstra ROM. The phone is currently being used on the Hutchison 3 carrier in Australia.
The phone has the following hardware/firmware settings:
R 1.00.25.06 (Radio Version)
G 52.31.25.13U (Protocol Version)
D 1.38.00.00 (ROM Version)
Installed ROM Version: 1.38.841.5 WWE
ROM Date: 07/07/08
I am finding that when using the EDGE data connection, whenever I attempt to make a call, the phone instantly crashes and reboots. Everytime. Arrggghhh! I am also finding that when using the HSDPA phone connection it has quite poor signal strength that results in lots of call dropouts. For a brand new phone these issues are very annoying.
I then discovered on the XDA-Developers site that HTC has released updates for their ROM on Hutchison 3 that, according to the htc Australia website, may fix the crash issue described above. Thanks!!! I've found this site is hugely informative but unfortunately for a noob like me, it is taking a while to learn what all the HTC jargon _actually means_.
I originally tried to download the official HTC Hutchison '3' ROM Update Utility but was denied access to this from the HTC website. I'm guessing this may be because the phone is Telstra Branded with a Telstra assigned serial number.
Eventually getting past this, I obtained access to the official HTC ROM Update Utility here:
[1] HTC Touch Diamond ROM Upgrade for Hutchison ‘3’ network customers
http://www.htc.com/au/SupportDownload.aspx?p_id=133&cat=2&dl_id=451
An updated ROM is now available for HTC Touch Diamond users to download. As always, HTC is committed to providing customers with the best possible mobile experience. ROM version:1.93.861.4 Radio Version: 1.08.25.20
HTC Touch Diamond ROM Upgrade for Hutchison ‘3’ network customers
Date: 2008-12-09 Category: ROM Upgrade
Download URL:
http://203.73.25.118/download/RomCo...igned_Diamond_52.44.25.24_1.08.25.20_Ship.exe
Also, for anyone interested that can't get past the HTC website serial number authentication process, also available is the latest Telstra ROM (I could access this Telstra ROM with my serial number):
[2] HTC Touch Diamond ROM code for Telstra Network
http://www.htc.com/au/SupportDownload.aspx?p_id=133&cat=2&dl_id=324
Date: 2008-08-07 Category: ROM Upgrade
HTC Touch Diamond ROM code (For Telstra Network customers) - version 1.38.841.5
Download URL:
http://203.73.25.118/download/RomCo...igned_Diamond_52.31.25.13_1.00.25.06_Ship.exe
So, my several related questions are as follows:
1. Is there an exact stepwise procedure that I can use that will definitely not brick my phone? Eg. Something really informative like this post: (http://selfmod.net/?p=7)
2. Reading the posts on the XDA Developers site seem to indicate I need to install Hard-SPL onto the phone first. Is this correct? and if yes, then which exact edition (Noob Edition, or Developer Edition) and version number should be used for the HTC Diamond specifications above? What is the official link for downloading this?
3. Will running the downloaded official HTC Hutchison 3 ROM provided above, without installing Hard-SPL at all, have the risk of bricking the phone?
4. What does Hard-SPL _actually_ do? Even after reading this: (http://wiki.xda-developers.com/index.php?pagename=Diamond_HardSPL) it's still not actually clear to me what this really does, but then I'm just a noob.
5. Exactly how do I backup my original Telstra ROM, just in case I need to re-install this.
Any help with these questions is appreciated.
Thanks.
nanohaxor said:
Hi,
Can anyone please help provide some clear guidance on the following issues and questions:
I recently purchased a HTC Touch Diamond. It was purchased brand new and unlocked from a reasonably reputable Australian store, and is branded with the Australian carrier Telstra NextG, and appears to be running a customised Telstra ROM. The phone is currently being used on the Hutchison 3 carrier in Australia.
The phone has the following hardware/firmware settings:
R 1.00.25.06 (Radio Version)
G 52.31.25.13U (Protocol Version)
D 1.38.00.00 (ROM Version)
Installed ROM Version: 1.38.841.5 WWE
ROM Date: 07/07/08
I am finding that when using the EDGE data connection, whenever I attempt to make a call, the phone instantly crashes and reboots. Everytime. Arrggghhh! I am also finding that when using the HSDPA phone connection it has quite poor signal strength that results in lots of call dropouts. For a brand new phone these issues are very annoying.
I then discovered on the XDA-Developers site that HTC has released updates for their ROM on Hutchison 3 that, according to the htc Australia website, may fix the crash issue described above. Thanks!!! I've found this site is hugely informative but unfortunately for a noob like me, it is taking a while to learn what all the HTC jargon _actually means_.
I originally tried to download the official HTC Hutchison '3' ROM Update Utility but was denied access to this from the HTC website. I'm guessing this may be because the phone is Telstra Branded with a Telstra assigned serial number.
Eventually getting past this, I obtained access to the official HTC ROM Update Utility here:
[1] HTC Touch Diamond ROM Upgrade for Hutchison ‘3’ network customers
http://www.htc.com/au/SupportDownload.aspx?p_id=133&cat=2&dl_id=451
An updated ROM is now available for HTC Touch Diamond users to download. As always, HTC is committed to providing customers with the best possible mobile experience. ROM version:1.93.861.4 Radio Version: 1.08.25.20
HTC Touch Diamond ROM Upgrade for Hutchison ‘3’ network customers
Date: 2008-12-09 Category: ROM Upgrade
Download URL:
http://203.73.25.118/download/RomCo...igned_Diamond_52.44.25.24_1.08.25.20_Ship.exe
Also, for anyone interested that can't get past the HTC website serial number authentication process, also available is the latest Telstra ROM (I could access this Telstra ROM with my serial number):
[2] HTC Touch Diamond ROM code for Telstra Network
http://www.htc.com/au/SupportDownload.aspx?p_id=133&cat=2&dl_id=324
Date: 2008-08-07 Category: ROM Upgrade
HTC Touch Diamond ROM code (For Telstra Network customers) - version 1.38.841.5
Download URL:
http://203.73.25.118/download/RomCo...igned_Diamond_52.31.25.13_1.00.25.06_Ship.exe
So, my several related questions are as follows:
1. Is there an exact stepwise procedure that I can use that will definitely not brick my phone? Eg. Something really informative like this post: (http://selfmod.net/?p=7)
2. Reading the posts on the XDA Developers site seem to indicate I need to install Hard-SPL onto the phone first. Is this correct? and if yes, then which exact edition (Noob Edition, or Developer Edition) and version number should be used for the HTC Diamond specifications above? What is the official link for downloading this?
3. Will running the downloaded official HTC Hutchison 3 ROM provided above, without installing Hard-SPL at all, have the risk of bricking the phone?
4. What does Hard-SPL _actually_ do? Even after reading this: (http://wiki.xda-developers.com/index.php?pagename=Diamond_HardSPL) it's still not actually clear to me what this really does, but then I'm just a noob.
5. Exactly how do I backup my original Telstra ROM, just in case I need to re-install this.
Any help with these questions is appreciated.
Thanks.
Click to expand...
Click to collapse
x2 ^^^^^^^^^^
I've have just done this on a Telstra phone but updating to the 1.93 HK rom.
1. Download the Telstra Rom from the link you have to your PC. This will be your backup. You can always re install this.
2. Install 1.24 Hard SPL as per instructions available on wiki and elsewhere. Basically it removes the CID security lock so you won't have vendor id mismatches etc. as this is the way HTC prevents other regional roms ending up elsewhere.
3. After rebooting, flash the 3 rom and install either using the KAISIMG.NBH from the internal storage (method as described elsewhere on this site) or by the USB method (standard exe installation).
4. Chances are this will all go through without issues if you do everything correctly and follow instructions. There is always a risk in doing all of this so there are no guarantees. Should something go wrong you should look at how to recover a bad flash.
I hope this helps.
yozhek said:
I've have just done this on a Telstra phone but updating to the 1.93 HK rom.
1. Download the Telstra Rom from the link you have to your PC. This will be your backup. You can always re install this.
2. Install 1.24 Hard SPL as per instructions available on wiki and elsewhere. Basically it removes the CID security lock so you won't have vendor id mismatches etc. as this is the way HTC prevents other regional roms ending up elsewhere.
3. After rebooting, flash the 3 rom and install either using the KAISIMG.NBH from the internal storage (method as described elsewhere on this site) or by the USB method (standard exe installation).
4. Chances are this will all go through without issues if you do everything correctly and follow instructions. There is always a risk in doing all of this so there are no guarantees. Should something go wrong you should look at how to recover a bad flash.
I hope this helps.
Click to expand...
Click to collapse
Hi yozhek,
Your suggestions are very helpful. Thanks!
I found this this link (http://www.4winmobile.com/forums/ht...mplete-upgrading-guide-hardspl-radio-rom.html) that seems to quite clearly explain what's involved in upgrading various sections of the phone. It also explains key pieces of the jargon/terminology so after reading this various aspects of the upgrade process are actually starting to make sense.
I also found another post on this site where 'princi' had tried to flash the HTC Hutchison 3 ROM using the Signed version of Hard-SPL (ie. Noob Edition) and it did not work. Apparently the ROM needs to be re-worked and signed by someone/grop on this site... the "Key-Master" i guess? In relation to the issue 'princi' had encountered, someone had suggested he try the Unsigned Hard-SPL (ie. Developer Edition) but there's no info posted so far indicating if this has worked.
In relation to your suggested steps:
Step 1 - done.
Step 2 - Do you mean the Unsigned Hard-SPL (ie. Developer Edition) version? The Unsigned Hard-SPL version currently available from here (http://wiki.xda-developers.com/index.php?pagename=Diamond_HardSPL) seems to be a more recent version number than your suggested 1.24 Hard-SPL. Does this matter?
Step 3 - Does the 'Hutchison 3 ROM' upgrade also upgrade the Radio ROM in the same single process, or are you suggesting using KAISIMG.NBH to do this? Is upgrading the Radio ROM really necessary, and if yes, what is the best link to obtain this from? (I did try to find this).
Step 4 - Mate, I hope you're right. Thanks!
Thanks Chaps for notifying that this ROM is available. Just loaded it with no probs using the DIAMIMG.nbh method from internal memory.
For anyone you is wondering why to use this ROM. The benefits are that it adds THREE network branding and a dedicated TF3D "3" tab with shortcuts to several "3" related items. Radio included is 1.08.25.20. Will give it a run for a day or tow and report back.
Hi Guys,
I am experiencing a very similar issue.
My unlocked Telstra HTC which I use on the "3" network, the system volume periodically turns itself off (and it is not just that the volume button has been turned down) and doesn't have any volume until I power off and on again. After reading a number of threads, it has been suggested to download the new Telstra ROM for the phone, but despite having updated the new Telstra ROM, I am still having the problem. I thought maybe changing to the new hutchinson "3" ROM may help with this problem. (or will it not?)
So
1. I have installed the unsigned Hard-SPL and the phone now displays SPL-1.40.OliNex.
2. I tried to upgrade the Hutchinson "3" ROM via the PC using the exe, but it is telling me "ERROR 244: INVALID MODEL ID."
3. I then tried to install it using the DIAMIMG.ndh method, but when it reboots, it asked me to 1.Press vol up to restore man default 2. Press volDown to restore man default and format moviNAND........ I suspect this is not the screen that I am supposed to see. I don't know how to get it to boot off internal storage ROM.
Any useful suggestions gratefully received.
pkilroy,
This is an extract from my ROM reflash checklist that I use religiously. It should get you going.
5. Flash the New ROM
Place the nbh file of the ROM you want to flash in the "Internal Storage" directory, and name it DIAMIMG.nbh
To initiate ROM load, keep volume down and back keys pressed (arrow pointing to the left above call-end key) and press red reset button. Wait for the new ROM to be flashed.
6. Factory reset when new ROM load complete. [Vol Down + Enter + Reset] then [Vol Up]
I have tried it with diamimg.nbh in the internal storage. But after I press Volume down, back <--- and reset, it says loading ... no image file found!! then it stays on the tricolor screen forever.
I have rechecked a few times and have make sure i have not put diamimg.nbh.nbh in the internal storage. Even tried hard reset the phone and internal storage first.
I am able to flash Dutty's ROM on my TD now, but somehow just can't get the HTC official Hutch 3 to work! any other suggestions?

US Diamond (pregame)

Hello XDA Friends!
I have done 2 solid nights of reading now - not to say I am in the least bit an expert, but this is my second experience with flashing htc phones (previously had a htc wizard). I am not a complete newb, but I have a few unanswered questions before i jump in balls deep.
1) After searching the forums, I have found that I seem to have a (rare) ROM version - 1.93.422.4 WWE to be exact. It is the stock US 3G GSM ROM. It appears that others have (after hardSPL) successfully flashed their Diamonds accordingly with European versions. I went to HTC's website and registered my Diamond and they told me that they do not have a down-loadable version of their ROM (an official HTC ROM) for the 3G US version. HTC simply does not make a version for US 3G that they release.
-"Unfortunately, after some checking on our website with your serial numbers, we have found that currently there is no ROM update for your devices. From our experience, there is almost never an update developed for unlocked US GSM devices. The way we release our updates is we develop them first (after receiving the operating system from Microsoft). Then the carrier or vendor takes the update and modifies it to fit their policies and we release it. Unfortunately, the vendor that usually sells unlocked US devices does not complete the last step." -HTC
This concerns me as this is my fallback in the event things do not go so well for me while flashing. SOOOO all that said, does anyone have a copy of the ROM lying around for my backup benefit!?!
2) Can anyone with a US diamond verify that they are indeed running with a cooked ROM (and be so kind as to suggest which one they prefer?). Obviously its trial and error, but stability and speed are high on the priority list (stock is SOOOO SLOOOW)!
3) The hard reset is confusing me. HTC rep said that if i do a hard reset that it will restore the device to factory settings, thus no need for me to download a ROM to restore the device (i obviously did not tell him i was looking into cooked ROMS!).
-" As far as a ROM that would restore the device, you would simply need to do a hard reset in the even that the ROM became corrupt. This would restore the device to factory defaults. " - HTC
This would indicate that the ROM is somewhere on the internal 4gb storage and copies itself back to the ROM. Is this erased when upgrading ROMS or becomes unavailable after going to hardspl? or would i still have the option to hard reset (take the red pill) and wake up believing that my dance with cooked ROMS was a dream!?!?
Thanks for all your help - fire away - I have thick skin. I'm sure someone will point out my lack of research skills ;p
Long live Xda,
-Nate
I have an unlocked US GSM also. I also tried to get it off the site and it said it was not for my device...
HTC support is pretty much useless, I called and they told me over the phone that my phone wont run WWE roms and that i needed US roms and i told them thats funny because it came preloaded with 1.93WWE.
Anyways The New official rom will work on your phone and its allot faster than the 1.93
First the Hard SPL i used this.
I use this RUU_Signed_1_93OliNex_HSPL_UnsignedEdition
http://forum.xda-developers.com/showthread.php?t=400950
And if you want the official 2.03 WWE ROM its here
Want this one
RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship
http://forum.xda-developers.com/showthread.php?t=471699
I haven't used any cooked ROMS yet so i cant help you out there
Awesome - thanks for the info - that was exactly what i was looking for! Yea... the fact that it says WWE in the ROM is completely contradicting - HTC tech support doesn't seem to know whats going on.
Have you tried the hard reset since you loaded the new ROMs? does it revert to 1.93?
Thanks again for posting,
-Nate
ok all,
flashed to hardSPL olinex 1.40, confirmed in the bootloader, tried to flash to 2.03WWE (as referred to me from above) and it gives me:
Error [244] : invalid model ID
This update utility cannot be used for your pda phone. please check your update utility.
OK. from reading i gather this is because something is wrong with hardSPL? what hardSPL should i use? Or is it another issue entirely?
thanks,
-Nate
btw - after hardSPL, and hard reset, everything on the internal storage is there
perhaps i need to be more specific. When i enter the bootloader, it says:
DIAM100 MFG 64M
SPL-1.40.OliNex
what the bible says it should say is
Hard SPL 1.40.Olinex
DIAM100 MFG 64M
SPL-1.40.OliNex
Does this mean that it did not upgrade correctly? Any ideas? Im trying win 1.37 OliNex
again it says in the bootloader
DIAM100 MFG 64M
SPL-1.37.OliNex
lets me get all the way to 99% and then fails with
Error 270 :update error
The image file is corrupt. please check your update utility.
I need some help guys. Starting to get a little frustrated do you have to update the radio rom before it will take the main rom?
-Nate
Ok, next update. Could not get any of the olix hard SPLs to work. I have tried to upgrade to hardSPL 1.24 per this thread
http://forum.xda-developers.com/showthread.php?t=408621
only problem is that the phone does not ever boot into windows. When i go into the bootloader, it still shows olix 1.37 hard SPL. I have tried re-downloading the file. So far it gets to 100% of the ROM flash and then throws the error 270. Any thoughts?
I never had this problem but on the page were you got the ROM they say if your having issues installing through the update utility to do this.
Rename ..NBH file to DIAMIMG.nbh
Copy to Internal Storage
Soft Reset + Hold volume down button + back button <--
Follow instructions on screen
Anymore problems just read this through the thread were you got the ROM your not the only one who got the "corrupted 270 error".
But flashing it from the storage card should work . ..Goodluck
http://forum.xda-developers.com/showthread.php?t=471699
Ok all,
I have had a hell of a time getting a rom that will install. I could repeatedly get to the bootloader without a problem, and every rom i flashed after installing olinex 1.37 allowed me to get all the way to 100% but would then tell me that the rom was corrupt.
I downloaded and installed Shaks rom, version 3.20 from
http://diamond.geg0r.de/index.php?dir=Shaks/V3.20/
AND ITS BACK INTO WINDOWS!!!!!! thanks GOD!
I will report on further issues i have with the device.
-Nate
When I try to burn the 2.03 WWE ROM mentioned onto my stock US Diamond I get: Error 294: Invalid Vendor ID.
Any ideas what I need to do? I did not change the SPL - must I do that?
I read through the referenced threads and see where people with Error 270 need to put the image file onto internal storage but I have been hesitant to try that since it for Error 270 and not necessarily Error 294.
Any ideas?
Thanks!
wpsantennas said:
When I try to burn the 2.03 WWE ROM mentioned onto my stock US Diamond I get: Error 294: Invalid Vendor ID.
Any ideas what I need to do? I did not change the SPL - must I do that?
I read through the referenced threads and see where people with Error 270 need to put the image file onto internal storage but I have been hesitant to try that since it for Error 270 and not necessarily Error 294.
Any ideas?
Thanks!
Click to expand...
Click to collapse
You need to upgrade to HardSPL.
demo23019 said:
I never had this problem but on the page were you got the ROM they say if your having issues installing through the update utility to do this.
Rename ..NBH file to DIAMIMG.nbh
Copy to Internal Storage
Soft Reset + Hold volume down button + back button <--
Follow instructions on screen
Anymore problems just read this through the thread were you got the ROM your not the only one who got the "corrupted 270 error".
But flashing it from the storage card should work . ..Goodluck
http://forum.xda-developers.com/showthread.php?t=471699
Click to expand...
Click to collapse
Here is the Rom only if anybody wants to flash it. You will not get the invalid ID error.
http://www.sendspace.com/file/iesg1h
Thanks for everybody's help. Burning the new SPL did the trick.
Have tweaked everything pretty much back to how I like it and am quite happy with the new ROM. My only complaint is that I prefer the larger Compact QWERTY keypad of the 1.93 ROM since I have fat fingers. I know that I can dig that keypad up elsewhere but I'll try to get used to the new one first.
Thanks again.

Flashing can't start, and cant't find solution the after searching the forum

So as you can figure out from the thread title I have a problem flashing my htc diamond.
I have installed a HardSPL version 1.30 OliNex, I can confirm that becouse on the three color screen there is a text saying "1.30 OliNex".
I still have the original ROM that comes with the phone when I bought it, so this meant to be my first flashing.
I want to flash the phone with this rom http://forum.xda-developers.com/showthread.php?t=593678 it is a WM 6.5 based ROM.
Because in the ROM package there wasn't a ROMUpdateUtility.exe I used it from other ROM package.
Connected via ActiveSync and followed the wizard. The phone reset and there came a gray screen with a progress bar. Now both progress bars on the phone and on the PC screen remain 0% and after a wile RUU finished with 262 ERROR Connection error, see the attached picture.
After that I tried to flash it from Internal Storage. A followed the steps according the procedure, and after the three colored screen it came the gray screen with "Loading..." message. I waited for almost 30 minutes and nothing happened.
What seems to be the problem?
I assumed about firewall disabling the connection. But I turned off the firewall and again the same story.
Then somewhere I found that there is incompatibility with the RUU and HardSPL version, but tried to flash with the same RUU that I used when I was installing HardSPL.
Then I tough that the problem is about flashing unsigned ROM on a signed HSPL, but it is not that the ROM is signed.
I am afraid to use MTTY so I don't brick my phone, because this is my first time flashing a Diamond.
I'm confused What seems to be the problem?
Any help can be welcomed.
Could this be indication of a hardware problem? When waiting for the "Loading..." message disappear the back cover warms a little.
Thanks.
1. Did you use the RUU from my thread?
2. NEVER USE AN H-SPL RUU TO FLASH ANYTHING OTHER THAN H-SPL!
3. is this a CMDA phone. IE, what network are you on?
Well no I didn't use the RUU from your thread, I've used a RUU from other ROM package.
This is not a CDMA phone I'm on T-Mobile Macedonia network. And the phone looks like this
On other Macedonian forum they told me it is a hardware problem. Can this be true?
So what do you think about my problem?
Well no I didn't use the RUU from your thread, I've used a RUU from other ROM package.
This is not a CDMA phone I'm on T-Mobile Macedonia network. And the phone looks like this
On other Macedonian forum they told me it is a hardware problem. Can this be true?
So what do you think about my problem?
EDIT: I did tried the RUU you recommended in your thread but it's the same.
I think it is in the PDA.
Configure active sync, and uncheck "allow usb connection" and try again.
For updating from internal storage you must have to copy the rom to the root of internal storage with a special name, ""diamimg.nbh"
Hmmm..
What he said... and...
Should have used one of the earlier SPLs. you only need to use the latest one if you are having problems with the older versions. I have the same diamond and used an early SPL.
Upgrade the radio rom first and go with a rom that's version 6.1 not 6.5 as most 6.5 roms now pack the Sense application.. (IMO Non-Sense, Senseless (Not enought ram or responsiveness))
Old roms here
http://forum.xda-developers.com/showthread.php?t=470757
Give olinex some cash for his Diamond Unlocker as this is the surefire way to fix it.
johnyboy_ said:
Configure active sync, and uncheck "allow usb connection" and try again.
For updating from internal storage you must have to copy the rom to the root of internal storage with a special name, ""diamimg.nbh"
Click to expand...
Click to collapse
The connection between PC and PDA is made, because as I said there is a progress bar on the phone screen too.
djfuego said:
What he said... and...
Should have used one of the earlier SPLs. you only need to use the latest one if you are having problems with the older versions. I have the same diamond and used an early SPL.
Upgrade the radio rom first and go with a rom that's version 6.1 not 6.5 as most 6.5 roms now pack the Sense application.. (IMO Non-Sense, Senseless (Not enought ram or responsiveness))
Old roms here
http://forum.xda-developers.com/showthread.php?t=470757
Give olinex some cash for his Diamond Unlocker as this is the surefire way to fix it.
Click to expand...
Click to collapse
As I understand you, you are saying to install later version of Hard SPL right?
So to install a new version of Hard SPL I just need to do the same procedure as the first time, or I have to uninstall the previous one?
And please help me which version of Hard SPL is safest to install? I'm afraid of the developer versions or maybe they aren't so scary
Are you a 100% positive it is the HardSPL?
djandreski said:
And please help me which version of Hard SPL is safest to install? I'm afraid of the developer versions or maybe they aren't so scary
Are you a 100% positive it is the HardSPL?
Click to expand...
Click to collapse
Presuming from your post, you are using a signed Olinex SPL, i doubt that the rom has been signed be OliNex, the only difference with Dev is you can flash any Rom, flash the Dev one from my thread, nothing to be afraid of
Good Luck
Badwolve1
What are the steps of installing new SPL?
Do I just need to do the same procedure as the first time, or I have to uninstall the previous one(somehow)?
UPDATE: I did it, I successfully flashed my Diamond PDA! It seams that the problem was in the SPL I installed 1.40 OliNex Unsigned and it flashed like a charm. Thanks guys for the help. Now this thread can be closed, or do I have to close it myself.
Great!
Glad it all worked out

Categories

Resources