Develop Bugs

Why always today screen after suspend mode?

Hi folks,
a quick question: since I am using WM6 my tytn always displays the today screen after comming from the suspend mode or blanc screen. This was definitly not the behaviour it did with WM5. An example:
When I'm listening to music with the built in Windows Media Player I like to turn off the screen (using the built in blanc screen function) to save battery. When I switch on the device again to change music or something the device always displays the today sceeen instead of the media player application and I have to switch back to the media player window manually. That drives me crazy as it is not the way it behaved using WM5.
Is there any possibility to change this behaviour in the way, that WM6 shows the last used application instead of the today screen when resuming from suspend mode or blanc screen?
Thank you!

Check you Today settings.
Go to Start>Settings>Today>Items tab and investigate the "Today Timeout" setting.

Timtown said:
Go to Start>Settings>Today>Items tab and investigate the "Today Timeout" setting.
Click to expand...
Click to collapse
I checked this already. The described problem is not related to the Today timeout setting. It appears every time, after a few seconds blanc screen anyway. Try it, you'll see.

i have also experianced this, is really annoying, anyone have any ideas how to resolve it...?

r3d3 said:
Hi folks,
a quick question: since I am using WM6 my tytn always displays the today screen after comming from the suspend mode or blanc screen. This was definitly not the behaviour it did with WM5.
Thank you!
Click to expand...
Click to collapse
Hi!
The best prgm I used for this reason is PPcsoft psShutXP u can have it on tray and u gona have 3 alt. Light Off Shut Down and Soft Reset strike on Light Off it works fine

I like this "feature". Problem I have is if I leave outlook open, I don't get a LED notification of new mail. At some point I had a ROM installed that always went back to the today screen and seem to resolve my issue. Is this something that can be changed in the registry?
Cal

nobody knows anything about that? Can't believe that there are not more people out there, who suffer from this issue

r3d3 said:
nobody knows anything about that? Can't believe that there are not more people out there, who suffer from this issue
Click to expand...
Click to collapse
Hi!
I think if u try the program I mentioned at #5 u gona like it. Here is the link
http://ppcsoft.narod.ru/english/

same problem here...

BatteryStatus
I think this might be related to BateryStatus Today Plugin.
There is a check box under "Tools" - "Show Today Screen on WakeUp". If you uncheck this it stops behaving in this way.

lonwas said:
I think this might be related to BateryStatus Today Plugin.
There is a check box under "Tools" - "Show Today Screen on WakeUp". If you uncheck this it stops behaving in this way.
Click to expand...
Click to collapse
I do not use BatterySTatus but I'll try it for solving my issue

Abo Forat said:
Hi!
I think if u try the program I mentioned at #5 u gona like it. Here is the link
http://ppcsoft.narod.ru/english/
Click to expand...
Click to collapse
Thanks for sharing the link but I think, this will not solve the problem for me: as far as I can see you have to go to the today screen anyway to reach the buttons this tool provides. So I haven't got anything....

Great stuff! Batterystatus really solved the problem...just set the tool to not show today screen and it works. Thanks for the hint!
(though I really don't understand that MS doesn't support this feature?!)

Hi, its not that MS doesn't support it, its that its enabled on some roms, and others not, mine always returns to whatever app it was on, after suspend, If you wanted to help figure out the cause, I suggest you install sktracker, and do a before and after the battery status install, and see what key that option in battery status is changing, I don't much care for battery status myself.

Start > Settings > Today > Items Tab
UNCHECK the Today Timeout
Today Timeout means that if the device is left unchecked for say, the Default "4 Hours" than after 4 hours, no matter what program window was running, it defaults back to the today screen when the device is reawakened
pssibly a bug in your OS or some program you are running makes it so every time you turn it back on
but uncheck that and maybe youll have some luck??
i had a similar problem with my iPaq hx4700 where if i was at the today screen, it would keep flickering, refreshing it every 1 second
i disabled the today timeout, and viola, its worked fine since

I have this issue too.
lonwas said:
I think this might be related to BateryStatus Today Plugin.
There is a check box under "Tools" - "Show Today Screen on WakeUp". If you uncheck this it stops behaving in this way.
Click to expand...
Click to collapse
Unrelated. I have BS installed and that option is NOT checked, yet it still does it.

This is very annoying, I like mine to sleep after 2 mins (to save power and lock the keyboard). then back to the today screen and have to switch to what I was doing..

Related to the Lock setting?
I have the same problem, and I think it is related to the lock settings. When I enable a simple PIN, my phone always returns to the Today screen after leaving suspend, regardless of the settings in the Today aplet.
If I disable the simple pin in the Lock settings applet, the pone returns to the last used application (unless the today timeout has been exceeded, as one would expect).
Hopefully that will help someone discover a fix. This problem did not occur in WM 5.

pgray007 said:
I have the same problem, and I think it is related to the lock settings. When I enable a simple PIN, my phone always returns to the Today screen after leaving suspend, regardless of the settings in the Today aplet.
If I disable the simple pin in the Lock settings applet, the pone returns to the last used application (unless the today timeout has been exceeded, as one would expect).
Hopefully that will help someone discover a fix. This problem did not occur in WM 5.
Click to expand...
Click to collapse
Hey, you are absolutely right. The problem won't be fixed by Batterystatus. I just mad a hardreset and didn't set a password, so I thought batterystatus fixed it.
It is a bug with the built in password function. So, is there anybody out there, who is able to fix that?

As said before, the Today showing after power-on the device is "another" problem caused by the WM6 Password Lock System. It's necessary to disable the password that locks the device to fix it.
And it's not the only problem. Be warned, don't try this at home!!!; if you got a password active and then you change the Owner Name without changing the password, you will find after the next reboot that your machine is unreachable because the password isn't recognized at all.
Incredible but true!

resume to last screen

hi all! I've been wondering ever since receiving my TP2, how can I set it so that the device resumes from standby/lock mode to the last screen that was active? Right now, it seems to restores only to the today tab.
For e.g. if I am using Notes and switch the device to standby using the on/off button, turning it back on takes me to today tab...

this question has just been asked in another thread called "Restore last tab after standby".
I have checked this issue for you and it does not account for me. When I switch of my TP when in, FI, Coreplayer and switch it on again, it still displays Coreplayer, or whatever app that was open before going into standby.

hhmmm thanks. it seems to be related to the lock function...
http://forum.xda-developers.com/showthread.php?t=532098&highlight=lock

hhmmm thanks. it seems to be related to the lock function...
http://forum.xda-developers.com/showthread.php?t=532098&highlight=lock

Tilt 2 freezing when locking phone...

Has anyone else had the problem with the Tilt 2 freezing when locking the phone? It doesn't happen all the time; but every so often, it freezes on me and I have to reset the phone to get it to work again. I haven't come across a solid answer for why it does this, so in the meantime I've reverted the locking mechanism to the Windows classic version, not the Windows default version that comes set on the phone. I do like the idea of the sliding unlocking mechanism, but I don't want to deal with the freezing. Is there a fix for this problem?

You are not the only one. I was wondering if it was S2U2.
I have been leaving my phone unplugged over night the past two nights to get a feel for the battery life. When I go to wake the phone in the morning it was either a blank screen or just the title bar before it froze. I had to reset to get the phone to work again.

thex said:
You are not the only one. I was wondering if it was S2U2.
I have been leaving my phone unplugged over night the past two nights to get a feel for the battery life. When I go to wake the phone in the morning it was either a blank screen or just the title bar before it froze. I had to reset to get the phone to work again.
Click to expand...
Click to collapse
I've had bad experiences with S2U2. I had installed S2U2 on my 8525, and I ended up having to do a hard reset. One day, after having to power down and restart the phone, it just wouldn't load. It got stuck in start-up mode. I don't plan to use S2U2 again. I'm not sure if the slide mechanism that comes standard with the Tilt 2 is related to S2U2 or not...

I am wondering if it is a conflict between the NEW WM lock slider and S2U2. I have a corporate exchange, so I have to use the PIN access.
I have the PIN set to appear in one hour if not in use. However, when using the WM slide locker, it ALWAYS reveals the PIN pad. If the PIN access did not appear after every WM slide locker, I would use it.
I changed the settings in for the WM lock to use the classic - thus eliminating the WM slide to unlock.
I will leave it OFF the charger tonight and let you know the results tomorrow.

Switching to WM Classic for the lock screen seems to work.
The screen did not freeze when I went to turn off the alarm this morning.
So the solution to use S2U2 is to change the Lock screen on your device from Default to Classic.

thex said:
Switching to WM Classic for the lock screen seems to work.
The screen did not freeze when I went to turn off the alarm this morning.
So the solution to use S2U2 is to change the Lock screen on your device from Default to Classic.
Click to expand...
Click to collapse
Thanks for the follow-up. Yeah, I've done the same thing: switched from default to classic. Thanks again.

Screen Unlock Freezes on Tilt 2
I too had this problem right out of the box. I switched to the Windows Classic as prescribed. However, this prompted me to get out the hand held drill and put a small hole right in the side of the back cover. I found myself having to battle the back cover every time I needed to soft reset, plus I noted the stylus needed to be removed to properly seat the back cover upon reinstall. Now I simply pull out my stylus and stick it in my hole. STOP IT!
Buzz
Formerly MDA / Wing / Tilt... and now Tilt 2
Always AT&T

Screen Unlock Freezes on Tilt 2
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?

southOCTilt2user said:
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
Click to expand...
Click to collapse
I have seen a post similar to this pop up multiple times in the past month. This guy was specifically having problems with his mail client.
http://forum.xda-developers.com/showthread.php?t=634213
Personally I have only experienced this issue when the phone was next to my engine getting 400° temps blasted on it. Its hard to say the actual cause of the problem, but it seems in ideal situations (no 2000 e-mails or excessive heat) my phone is free of any freezing or strange behavior.
*edit*
also at the end of that post another user posted a work around that seems to be helping.

southOCTilt2user said:
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
Click to expand...
Click to collapse
After returning my first HTC Tilt 2 phone and I got a second one, I got the same problem again.
I think I found the screen lock bug for the HTC Tilt 2 that I am able to reproduce. The problem is when I enable the Owner Information [Identification information or Notes] to display when the device is turned on and then try to slide the lock icon it will not unlock the phone.
HTC, please look into fixing this bug. Thanks!
Here are the steps to reproduce the problem:
1. Press the Windows logo start key (the second key on the bottom of your phone).
2. Choose Settings.
3. Choose Personal.
4. Choose Owner Information.
5. I populated everything on the Identification tab as well as a note to contact me on the Notes tab.
6. Choose the Options tab.
7. Check mark either the Identification information box or the Notes box.
8. Click OK
9. Now lock your phone by holding down the end call button.
10. Power off your phone.
11. Power on your phone.
12. Try to unlock your phone right away by sliding the lock all the way left or right.
13. You can slide the lock icon all you want but you will never get to unlock your phone.
14. You now need to soft reset your phone by taking the back cover off and using the stylus to press the side reset button. :-(
I hope this makes it into a downloadable bug fix. In the meantime, I have disabled (unchecked) any Owner Info notifications on device power up. I really miss having this on device power up as my old 7 year old Nokia phone was able to do that without a problem.

Tilt 2 wakes up with every text -- I don't want that!

One thing I really liked about my T2 out of the box was the fact that receiving a text message did NOT wake up the phone.
All of the sudden, it is waking up with every text. I checked to make sure that somehow DisableSMSWakeupEvent hadn't been changed to '0', but it is still set to '1'. Did a soft reset, rechecked the registry value (it's still set to '1')but the phone continues to wake up with every text. I also checked in event notifications to make sure I hadn't inadvertently checked the 'Display message on screen' box.
I had installed Advanced Configuration Tool a few days ago, but uninstalled it the next day after only checking out the options and didn't change anything with it. My only other recently installed software is SPB Time, but it's been in place for more than two weeks so I don't think that's doing it. And I'm *still* using the stock AT&T rom.
What gives? I don't want my phone to wake up when I receive a text!

I only fixed this when I used advance config to tell it to wake up on text, softreset, don't wake up on text, soft reset, and then it finally worked how I wanted it.

try deleting the string and then recreating the dword string. and then soft resetting.

i dont understand why you dont like your pro2 to wake up when the SMS comes in, how will you know a message has arrived????
this is a must feature of a phone,each person who are involved in thw world's business will require.
Hope you are not a spooky person,

nokiadashi said:
i dont understand why you dont like your pro2 to wake up when the SMS comes in, how will you know a message has arrived????
this is a must feature of a phone,each person who are involved in thw world's business will require.
Hope you are not a spooky person,
Click to expand...
Click to collapse
It will still vibrate, beep etc, just not turn on the screen until you press the button.
Mine is doing the same. I agree with the OP

Why?
Because my phone lives in my pocket, and when I'm seeing patients or have my hand somewhere you probably don't wanna know about, I can't check every text as it comes in. If the screen turns on in my pocket, then I begin pocket dialing or other bad things. And THAT'S why I con't want my phone to light up when I get a text.
Besides, I have the LED set to flash with new message notification, as well as to vibe so I'll know I just got a text.
The good news is that after the problem has suddenly disappeared just as suddenly as it appeared. Guess I must have bowed down properly to the phone gods in my sleep last night...

You could try using S2U2...
That way you won't start 'pocket dialing'.

Bright.Light said:
You could try using S2U2...
That way you won't start 'pocket dialing'.
Click to expand...
Click to collapse
+1 for S2U2 Pocket dialing is a thing of the past... I dont know why microsoft or HTC havent incorporated a better lock

jlmwrite said:
One thing I really liked about my T2 out of the box was the fact that receiving a text message did NOT wake up the phone.
All of the sudden, it is waking up with every text. I checked to make sure that somehow DisableSMSWakeupEvent hadn't been changed to '0', but it is still set to '1'. Did a soft reset, rechecked the registry value (it's still set to '1')but the phone continues to wake up with every text. I also checked in event notifications to make sure I hadn't inadvertently checked the 'Display message on screen' box.
I had installed Advanced Configuration Tool a few days ago, but uninstalled it the next day after only checking out the options and didn't change anything with it. My only other recently installed software is SPB Time, but it's been in place for more than two weeks so I don't think that's doing it. And I'm *still* using the stock AT&T rom.
What gives? I don't want my phone to wake up when I receive a text!
Click to expand...
Click to collapse
I do want my Tilt to wake up with every text and it isn't. I am new to this, can you tell me how to make this change?

[Q] Problem with Screen remaining unlocked

This problem is with the screen and phone not going to sleep mode after an event that brings it out of sleep.
After i lock the screen manually by pressing the button on the top, the phone would wake up briefly due to an event like a calendar reminder, text, phone etc.
So after certain duration of inactivity, it should go back into the sleep mode automatically. Right, it used to, but not anymore. It just stopped. I have checked the Advanced settings under the Battery option but no good.
Although after say 30 seconds (as per my setting) the screen fades to low light to conserve battery, but remains active.
As a result i have inadvertently pocket dialed quite a many and it's beginning to be a privacy concern and a pain in the butt for me and others. Not to mention the charges from the international number my phone self-dialed.
I'm using a TP-2 Rhodium OS 6.1.
As if the battery didn't suck enough, I needed this !!!
Any tips would be appreciated.

If the phone "used to" go to sleep but doesn't anymore, it sounds like a recently installed program or process is running in the background forcing it to stay on.
Does the phone refuse to go to sleep only after being woken up by an event?
...or does it not go to sleep on its own at all anymore?

Isn't pressing that button on the top just closing the screen?, unless you set it as the lock as well

I should have mentioned - the phone will go back to sleep mode if I manually operate the button on the top. Just that it won't go to sleep on its own anymore.
You may be right user602, about the recently installed apps, but is there any way to narrow down on the culprit instead of uninstalling all of them?

s6a6n6d6m6a6n said:
I should have mentioned - the phone will go back to sleep mode if I manually operate the button on the top. Just that it won't go to sleep on its own anymore.
You may be right user602, about the recently installed apps, but is there any way to narrow down on the culprit instead of uninstalling all of them?
Click to expand...
Click to collapse
Go back and check the power settings again; make sure they are set to have the screen turn off. Change the settings to some other value and see if that helps. Maybe something just messed around with your registry entries.
If not, you will need to uninstall those programs, in reverse order, until the device works.

I'd start by changing the power settings as suggested by stevedebi above.
If that doesn't help, and you want to avoid uninstalling a bunch of stuff, you can look at what's running using Task Manager:
-Begin by stopping running programs one at a time, and seeing if the device will sleep.
-If that doesn't help, stop processes one at a time, and again see if the device will sleep (watch out for critical system processes, though).
...or if you're lucky, you may find something in the \windows\startup folder, such as a program you were not aware is starting on boot.
Of course, this all ends with uninstalling programs one at a time if none of the above suggestions work.
-602

------- "I'd start by changing the power settings as suggested by stevedebi above."
I can swear i tried this before and it didn't work. Changed it one last time before doing anything else,... and voila !!!
Thanks 602 & stevedebi

That was easy!
I'm glad the simplest solution worked for you.
...That's usually not my luck!
Cheers,
-602