Related
Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!
You might have better luck asking for assistance on this subject in the Artemis upgrading forum:
http://forum.xda-developers.com/forumdisplay.php?f=318
andreazzo said:
Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!
Click to expand...
Click to collapse
Hard Spl??? For the Artmes?? Mate are you trying to brick your device cause it seems you are doing a pretty good job of it too,Hard Spl is NOT for the p3300 it is for the Hermes and Trinity which are two very very different models of HTC. Please make an effort to read the Wiki before you start messing with the phone.Try flashing the t-mobile stock rom FOR THE ARTEMIS(WITHOUT THE HARD SPL) and hopefully it may work also find out from your buyer if it is CID unlocked though i doubt wether they would know.
Check in Settings - Connections - USB to PC that the USB advanced network functionality is not ticked. That's caught me out in the past after making changes.
This is assuming that others in this forum are correct and you've not yet made a brick using the wrong model. Good luck!
One problem more on rom
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye
andreazzo said:
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye
Click to expand...
Click to collapse
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.
arvind09 said:
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.
Click to expand...
Click to collapse
T-Mobile Here
Did you buy it in China?
If you bought the phone in China, there will be 2 versions. 1 for the chinese market (han huo) and the others are for other markets (usually europe) then flashed with the chinese rom (shui huo). As far as I know the chinese versions aren't locked and the foreign market versions musn't be locked either due to the fact that they have to put on the chinese rom
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
doudydoudy said:
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
Click to expand...
Click to collapse
LOL, sorry mate but that really IS a noob question
works perfect !
Thanks man
doudydoudy said:
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
Click to expand...
Click to collapse
Check out racerx_'s guide over here:
http://forum.xda-developers.com/showthread.php?t=316098
It has step-by-step guides with pictures to guide you along. By the way, don't do anything before you read through the tons of information you can find on this site. Just to be on the safe side.
Hope this helps!
Thank's a lot Shadowmite,
Just one last question before I try :
You're refering to the "Hard-SPL_ZakMcRofl.zip" in your first post. On the other hand, I saw you opening a thread regarding the new "Hard-SPL 1.30 MFG - Oli.zip".
Which one should I/we use, or doesn't it make any difference.
Having a SFR/Vodafone s300+ I'm a bit scared as there's no genuine rom to downgrade back to in case I get blocked.
Bye
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Shadowmite said:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
Click to expand...
Click to collapse
Thank you so much!
I want to try this ROM right now, but I don´t have access to rapidshare-like sites here in my office.
Can someone upload this ROM to a public server ZIPped and RARed with password (to avoid proxy to sneak into the file... it's blocking some downloads...)
I can setup a FTP account. If someone can upload the ROM to my server, I can share the ROM with people who has the same problem with rapidshare-and-stuff sites.
Thanks!!!
installed the rom.
but....
now i want to return to the original rom and downgrading i obtain a vendor id error.
I tried to cid unlock the device also and the error i the same. any ideas that can help me?
thanks
junwei83 said:
Check out racerx_'s guide over here:
http://forum.xda-developers.com/showthread.php?t=316098
It has step-by-step guides with pictures to guide you along. By the way, don't do anything before you read through the tons of information you can find on this site. Just to be on the safe side.
Hope this helps!
Click to expand...
Click to collapse
wow man ! thanks a LOT ! i really appreciate it
only a few ppl would stop and help
thanks again
racerx_ said:
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Click to expand...
Click to collapse
Tried with the Olipro and everything works fine.
Big thanks to all the people on this forum always ready to help.
Shadowmite said:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
Click to expand...
Click to collapse
Thanx, process working...
Version of this rom?
SEA or ANZ?
Thanks
I've just updated the SPL with the one provided on this post...
It seem to be the Des’ Crash-Proof SPL...
I have this informations on the screen when starting in boot loader mode:
------------------------
TRIN100
IPL-0.50
TRIN100
SPL-9.99.CP
------------------------
which versions we have to use ??
I think that you previously talking about olipro ?
racerx_ said:
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Click to expand...
Click to collapse
ROM working but...
Hi there!
First of all thanks for the trouble of getting the nasty bits out of the bundle and giving us just the OS
But... (there seems to be always a "but" with WM6) I've been having some problems with this:
- VOIP is nowhere to be found, no SIP settings anywhere.
- Memory Stick corruption. From time to time my SDHC stick goes crazy, showing up strange characters for the filenames and only a soft-reset gets it back to normal.
- Did any of you guys manage to get Video Calling working?
Well... the major deal for me is the Memory Card issue... Anyone having the same problems? Any ideas?
Best,
M Addario
--
HTC P3600
any hard-spl will work for this repackaging of the release.. you're fine to proceed
yes, you have Des' crash-proof SPL
addario, there's really no need to post the same question in multiple threads..
This rom seem to not contain any ext_rom ...
The "Device Information" module dont report any EXT_ROM version ...
it's "normal" ?
The attached screen capture show the "Device information" tab.
There is no informations about the ext_rom.
I also cannot access to it thru Total Commander.
So... it seem that something is corrupted on this rom update...
Some Info....
@ Shadowmite
Dear could you please tell me from which version did you re-make this ROM & why is there no detail showing of ExtROM in Device Information.
Hi,
I'm completely new to all this but have done my best to try and figure it out for myself but I'd still like to make sure I've understood a few things correctly...
I have an SFR s300+ bought here in France. The OS is WM5 and I'd like WM6.
I have allready tried out the "off"+"camera button"= soft reset to see if I needed to install a hard SPL : I do. I've downloaded Des' Crashproof (due to the reassuring name).
I can now install that by following the guide without backing anything up yet...
Once done I will have to copy all my important info and then I will be able to flash any ROM of my choice (English, French, official or not) is that right? If I'm not mistaken and I can install any ROM, which English ROM is the best (this one looks good...)?
I'd also like to know if I have to install a radio after this or will the one I have at the moment (that works fine) be preserved?
If I do have to install a radio which do you recommend for SFR in France considering I sometimes go to Spain.
Thanks for your help
Hi all,
I've red a lot in this forum, got lots of info on how to fix things (i really have!), but despite all the usefull info I got confused...so here's the thing:
I have a HTC Touch Dual (Dutch + Vodafone) where the language is ofcourse Dutch. To cut the long story short...I really like to have an English version of my WM 6.0. I know this can be fixed by upgrading yer ROM, but it's always recommended by ppl in this forum to backup yer ROM first before you replace yer ROM. The question is: How (with what tool) can I make a backup of my current ROM?
Somebody please help me out, I can't find any instruction in this forum how to do that, or at least paste a link where it's explained?
Thank you very much in advance!
cheers,
a guy with a cup of chai
suddenly...i found it.. :s
Please put the link here... because you are my first result for 'backup rom'
Can you please put the link here for how to back up the ROM for the benefit of others...
Thanks
And the rom to maby ? because i'm looking for a touch dual rom from Vodafone with the dutch language ! please upload it there are many people who will appreciate it very much.
oh sorry guys...i forgot to monitor my post
there was a guy who asked the same...so here's the link of that particular post:
http://forum.xda-developers.com/showthread.php?t=359427
note: watch out for step 2 (the first link is the tool to make a backup, the second one is an explanation on which command to use to fix it, and what it should look like)
hope this will help u guys...good luck
rockahh said:
And the rom to maby ? because i'm looking for a touch dual rom from Vodafone with the dutch language ! please upload it there are many people who will appreciate it very much.
Click to expand...
Click to collapse
oow ok...i've a vodafone branded dual touch with a dutch WM6...i'll try to make a dump and up it..
Hi, does anyone has the E1 ROM?
I can comfirm that it is officially released, at least in Singapore. But the upgrade can only be performed at Samsung Service Center.
I was hoping someone has dumped the ROM and I can use mirage to update at the comfort of my home.
The main thing that was updated is the messenger wifi connection issue.
Cheers
I hope it is some more then that.. ;(
every new ROM version only has one improvement. So funny.
@all
i want to ask about flash ROM for i780.i plan to buy it in China.as i know Windows OS in China has its language on i780 itself,means that i780 in China using Chinese Windows Mobile.now my question is I am in Indonesia and impossible i can operate it in Chinese Windows Mobile.so maybe you know how can make it in English?Flash its ROM or maybe have another way?
thanks anyway..
fallen_sky84 said:
@all
i want to ask about flash ROM for i780.i plan to buy it in China.as i know Windows OS in China has its language on i780 itself,means that i780 in China using Chinese Windows Mobile.now my question is I am in Indonesia and impossible i can operate it in Chinese Windows Mobile.so maybe you know how can make it in English?Flash its ROM or maybe have another way?
thanks anyway..
Click to expand...
Click to collapse
dude read the forums... no need to use even search just read the first page and u will see atleast 2 posts with samsung roms..in a word the answer is NO
(atleast ull be shockedand read those posts)
zohaer21 said:
dude read the forums... no need to use even search just read the first page and u will see atleast 2 posts with samsung roms..in a word the answer is NO
(atleast ull be shockedand read those posts)
Click to expand...
Click to collapse
Erm, why can't you just flash it in the C4 or D1 English ROMs and make it work?
found this on a great Italian forum (all credits to the guy who posted it - don't know if I may link to the forum nor to the rapisshare-link (otherwise please remove it))
http://rs346.rapidshare.com/files/120197435/i780PUHE1.7z
\tilleke
Hello,
What forum is that? i speak italian so i would like to take a look.
Thanks!
Joao Oliveira.
tilleke said:
found this on a great Italian forum (all credits to the guy who posted it - don't know if I may link to the forum nor to the rapisshare-link (otherwise please remove it))
http://rs346.rapidshare.com/files/120197435/i780PUHE1.7z
\tilleke
Click to expand...
Click to collapse
This file come from http://greydog-c100.narod.ru/downloads/firmware.html
read on the readme file with the rom
ok, thanks but what i would really like to know is what exactly is new on this rom etc etc...
ciao,
Joao Oliveira.
webise said:
This file come from http://greydog-c100.narod.ru/downloads/firmware.html
read on the readme file with the rom
Click to expand...
Click to collapse
is this Italian or English?
pdaman said:
is this Italian or English?
Click to expand...
Click to collapse
Its russian so keep away if you can´t understand that
one could use it for updating EBOOT and PHONE..........
hmm,... maybe ucan install english language pack .. or some one with a lot of free time can translate it into english!
Come on guys. It's not possible that anyone has an he1 english dump.
Charge via USB???
It would be interesting to understend if with EBOOT + Phone update the improve the charge via USB as reported from Singapore......
famusc said:
Come on guys. It's not possible that anyone has an he1 english dump.
Click to expand...
Click to collapse
wel.. downloaded the file; only installed the supposedly HE1 phone part..version info shows :i780PUHE1 version.. (got a i780XKHA3 PDA version in Dutch)
so.. well, dont really know if its hard the change the showd version part..suggestions for me to test/checkout ?
tilleke said:
one could use it for updating EBOOT and PHONE..........
Click to expand...
Click to collapse
is this possible flash pda and phone in different version? Stable? I am using DXHC4.
I flashed my i780 with a different pda version the phone version. This is no problem..
HE1 works stable, havent got a lot of time to test it... but I can always flash back.
Hi guys,
I have downloaded the windows mobile 6.5+kaiser(loader)-also done a hard reset on my touch hd htc-the multi colour screen comes up then it says failed retry-have tried over and over again and its 03:30hrs in the am-
pls come someone guide me on how to flash or am i missing something here-
pls pls help
http://forum.xda-developers.com/showthread.php?t=505377
deepak12345 said:
Hi guys,
I have downloaded the windows mobile 6.5+kaiser(loader)-also done a hard reset on my touch hd htc-the multi colour screen comes up then it says failed retry-have tried over and over again and its 03:30hrs in the am-
pls come someone guide me on how to flash or am i missing something here-
pls pls help
Click to expand...
Click to collapse
hey what device you using?
this is for blackstone only not kaeser. u will brick you device if u have blackstone and using kaeser spl
Go HERE, please!
thanks guys,
I have htc touch hd-is that compatible?
deepak12345 said:
thanks guys,
I have htc touch hd-is that compatible?
Click to expand...
Click to collapse
Yes. But why do you mention Kaiser in your first post?
Follow the link in post 2 above and read all of that thread before you start to flash.
deepak12345 said:
Hi guys,
I have downloaded the windows mobile 6.5+kaiser(loader)-also done a hard reset on my touch hd htc-the multi colour screen comes up then it says failed retry-have tried over and over again and its 03:30hrs in the am-
pls come someone guide me on how to flash or am i missing something here-
pls pls help
Click to expand...
Click to collapse
He said he downloaded the kaiser one for his touch hd. Seems like a bad move..
deepak12345 said:
thanks guys,
I have htc touch hd-is that compatible?
Click to expand...
Click to collapse
man! blackstone is for blackstone,
if you have blackstone and u want to upgrade from 6.1 to 6.5 roms use the appropriate H-SPL Read the post # 2 aswell
what are u doing on kaeser forum and downloading stuff not meant for ur device
Only flash roms meant for the HD onto the HD. Do not under any circumstances flash a rom from another device onto your HD. Chances are there will be incompatibility issues with software/hardware and you may end up bricking your device.
For guidance on flashing please refer to the wiki and also this guide.
Any further queries on flashing should be posted in this guide.
Thread closed
In future try searching before posting and creating new threads (if required) in relevent forums
Ta
Rick