Related
The other thread was getting a little large, plus we have a new version out.
Here's Chome Weather 2.0 with a 10 day forecast. Download the cab and enjoy, more detailed instructions to follow.
1) Install the cab in the link at the bottom of the post.
2) It should ask to reboot ! Press "Ok"
3) Go to your Start Menu and find "Weather Options", or go down to the Settings slide on your homescreen and the second slide will be the CHome Weather options slide.
Set your Zip / Location Code to your zip code if you're in the US or a "location code" if you're anywhere else (ex: ROXX003 for Bucharest). More info on finding your specific code is here http://developer.yahoo.com/weather/#req . Set the "Fahrenheit / Celsius" option to either "F" or "C" (without the quotes!). This will only affect the reading of the current conditions panels, not the text descriptions in the forecast panels. Those will always be in Fahrenheit.
Specify how often you would like to autoupdate the weather information, in minutes in option #3. It's set to 60 by default and I would not recommend seting it any lower, as that's how often Yahoo updates the information on their servers anyway.
Specify whether you would like the application to attempt to connect your default GPRS connection first, before updating. If you have a constant data connection on, leave this on "N". Finally you can turn off the autoupdate feature with the last option #7.
4) Now it might be a good idea to go to Start and find "Update Weather" and run it to update the weather data! Alternatively you can click the center button while you're on any of the forecast panels.
5) The cab should set your Home Screen to "Sliding Panel Top Bar + Weather!" automatically. If your top icons disappear then you might have to use the regular "Sliding Panel + Weather!" theme.
6) Enjoy and report any bugs you might encounter, please.
New features:
- Regular sized icons for the forecast panels, they do not affect other "welcomecenter" based panels.
- Revised layouts to ensure correct wrapping
- HomeScreen update feature. No need to reboot to see forecast or layout changes. This option is turned off by default because it doesn't work for everybody. If you turn it on and you see problems with your phone's radio turning off, phone becoming very slow etc... turn it off. (it's option #10)
- Added new panel to the Settings panel at the bottom for easy access to the weather updates and settings.
- "Spil icons" are default for forecast and regular panels.
Screenshot descriptions:
1- IPhone Layout (this is the default layout)
2- Forecast Panels screenshot
3- Slim Panels Layout with the background options enabled
4- HTC Slim Layout while updating
5- HTC Slim Layout in normal mode
6- The HomeScreen with the weather plugin in its "condensed" state at the bottom, showing current conditions
7- Regular Panel Layouy with no background.
8- IPhone Slim Layout
Download link > http://www.sendspace.com/file/0f8g23
Vox Version > http://www.sendspace.com/file/rxa13k
Look at post #3 to complete the installation for Vox phones. (or any other phones that will not install the regular version)
Current Version: 2.0.3
Changes to 2.0.3:
- completely redesigned Options panel. Hopefully things will be easier to get around. Now it tell you what the current layout used is.
- Fixed HTC Layout (5) text not wrapping down issue.
- Added option NOT to check for internet connection before connecting.
- Options panel keeps track of what layout you're running.
- added blue, purple, WM7 style or original glass panel selection to options panel.
- updated portrait CPRs.
- forecast panels should now display "N/A" icons when a forecast is not available instead of a red x.
- ability to choose between european("rest of the world pretty much...) or american style dates on the forecast panels.
If you like this application and feel the need to support my work, here's a link to donate to me via PayPal.
PayPal Donate
This is the "addons" post.
Added "NRG Power Key..... .cab This will add three options to the menu that comes up when you hit the power key on the side of your Excalibur. "Power off", "Reboot" and "Weather Update". I hope they're self explanatory Have fun.
Download the Calibri font mod if you want your system font to look like the one in the screenshots.
The Yahoo, Spil, Novaweather and 7Degree icon sets are alternative icons sets for your Forecast and Regular and Slim Panel layouts
Also using this post to keep a list of TO DO's since I always forget:
- Better autoupdate logic. *DONE*
(got rid of "weathertimer.mscr" and using the phone's notification queue... will beta test this over the next couple of days)
- Checking whether on a call, when going to update the weather info. If on a call, exit and run 10 minutes after... and so on... *DONE*
- Make option menu that lets the user chose how many pages of forecast info they can see.
- Move PNGs to storage card. Create two separate cab's for installation. Maine program and Icon packs
- Add second or third panel with more "current weather information" details. *IN PROGRESS*
Files needs to complete the VOX installation are attached. Install the Vox cab above, then unzip Vox Windows.zip and drop all the files in it in the \windows directory on your device. Install weathertimer.mscr in \windows\startup.
OrganicM said:
The other thread was getting a little large, plus we have a new version out.
Here's Chome Weather 2.0 with a 10 day forecast. Download the cab and enjoy, more detailed instructions to follow. To list some new features:
- Regular sized icons for the forecast panels, they do not affect other "welcomecenter" based panels (too much ).
- Revised layout to ensure correct wrapping
- HomeScreen update feature. No need to reboot to see forecast or layout changes. This option is turned off by default, so you need to go to Options, and turn it on. (it's #10)
- Added new panel to the Settings panel at the bottom for easy access to the weather updates and settings.
- "Spil icons" are default for forecast and regular panels.
Download link > http://www.sendspace.com/file/saqzxb
Click to expand...
Click to collapse
POST OBSOLETE
Final version? wooot!!
Edit: i just installed the update....its way better than the beta, of course, the only problem im still having are the icons.... the CLinks icons are still oversized and still have no idea where to edit them ... any help would be appreciated
LOVE IT!!!
Compared it to weather.gov accurate also.
This is KICK ASS
installing cab file now... didnt have the first version, dont know why. i live in virginia beach, va and its supposed to be one of the most climate changing places in the us... ill let you know how it turns out.... judging by your pics and everyone elses responses its gonna be tits
Good Job just one question.. when i go to the weather thing on my home screen i have 1/10 options to scroll thru what do they all represent? theres no dates or anything... can you explain?
Amazing........
Hi Org,
It looks and works great, even my distorted icons are back to normal, a biggggg thanks for all your efforts and your patience with all of us demanding more stuff..........
Whoa...okay. Just disregard this whole post guys. Let this be a lesson to you--work with your program for at least 15-20 minutes before reporting bugs. I feel ridiculous for not dabbling with this before crying wolf! My bad, Org!
axv91 said:
Final version? wooot!!
Edit: i just installed the update....its way better than the beta, of course, the only problem im still having are the icons.... the CLinks icons are still oversized and still have no idea where to edit them ... any help would be appreciated
Click to expand...
Click to collapse
You can edit the size of the icons in the .cpr files. Look in program files\NRG\chomeweather\cprs and edit the cpr that you are using(they're all in there). Doesn't make sense that clinks is oversized and weather is smaller, if that is case, can you upload copy of your current cpr that you are using(in windows\home.cpr.xml I think)? I would like to see something before you edit it. And after you edit, goto weather options and rechoose your layout to activate new cpr.
yea... umm.... not sayin its a bad thing, but my color icon bar at the top went back to black and white, and it wont show saturday and sunday, then skips from tuesday to saturday of next week... maybe i did something wrong?? but i could see the setup option text either... all in all i like it
turned the autoupdate off... maybe im just havin problems with it... im usin ricky's 23rd rom. im about ready to take this weather off cause i like the whole forcast thing, but not when it jumps from tuesday to saturday...
1) the last day is still on the second tab on the panel.
2) the text is still cutoff
showaco said:
You can edit the size of the icons in the .cpr files. Look in program files\NRG\chomeweather\cprs and edit the cpr that you are using(they're all in there). Doesn't make sense that clinks is oversized and weather is smaller, if that is case, can you upload copy of your current cpr that you are using(in windows\home.cpr.xml I think)? I would like to see something before you edit it. And after you edit, goto weather options and rechoose your layout to activate new cpr.
Click to expand...
Click to collapse
i was actually looking at the cpr in the \windows, i totally forgot about the cprs in the program files .... btw, i forgot to mention that im using a 240x320 device
so maybe that's why it didn't change text/icon size (i'll upload the cpr file anyway for u to see).... thank u vry much for the help, i really appreciate it!
http://www.sendspace.com/file/jky0kj
slater87 said:
yea... umm.... not sayin its a bad thing, but my color icon bar at the top went back to black and white, and it wont show saturday and sunday, then skips from tuesday to saturday of next week... maybe i did something wrong?? but i could see the setup option text either... all in all i like it
Click to expand...
Click to collapse
Sounds like mine... Mine skips Sunday, June 1st on the forecast panel.
what to do syntaxx??
slater87 said:
what to do syntaxx??
Click to expand...
Click to collapse
No clue! lol That's why I posted my issue along with yours--hopefully Org will work on this!
im removing the whole program now... sorry, but the thought is there. its just not workin out for me... maybe when the 3.0 thread comes out
oh, tryin to uninstall and it says it cant be completely removed... looks like im reflashin tonight
could be the operator and not the program tho... o well, the options text is too small and way too cursivey for me to read...
slater87 said:
im removing the whole program now... sorry, but the thought is there. its just not workin out for me... maybe when the 3.0 thread comes out
oh, tryin to uninstall and it says it cant be completely removed... looks like im reflashin tonight
could be the operator and not the program tho... o well, the options text is too small and way too cursivey for me to read...
Click to expand...
Click to collapse
Before reflashing, try to install the weather .cab again. I had this problem with an older version and I just downloaded another over it--and SOMEHOW it uninstalled the whole thing! Try other methods before reflashing. It can be a headache to get your settings the way you like them again.
so let me get this straight.. just run the cab file again? and everything should go peachy?
Here's Chome Weather 3.0 with a 10 day forecast. Download the cab and enjoy.
1) Install the cab in the link at the bottom of the post.
2) It should ask to reboot ! Press "Ok"
3) Go to your Start Menu and find "Weather Options", or go down to the Settings slide on your homescreen and the second slide will be the CHome Weather options slide.
Set your Zip / Location Code to your zip code if you're in the US or a "location code" if you're anywhere else (ex: ROXX003 for Bucharest). More info on finding your specific code is here http://developer.yahoo.com/weather/#req . Set the "Fahrenheit / Celsius" option. This will only affect the reading of the current conditions panels, not the text descriptions in the forecast panels. Those will always be in Fahrenheit.
Specify whether you would like the application to attempt to connect your default GPRS connection first, before updating. If you have a constant data connection on, leave this on "N". Finally you can turn off the autoupdate feature with the last option #7.
4) Now it might be a good idea to go to Start and find "Update Weather" and run it to update the weather data! Alternatively you can click the center button while you're on any of the forecast panels.
5) The cab should set your Home Screen to "Sliding Panel + Weather!" automatically.
6) Enjoy and report any bugs you might encounter, please.
New features:
- New 6 day forecast layout (layout #7)
- Autoupdate using Yahoo's server time. No manual control over update interval anymore.
- Revised layouts to ensure correct wrapping
- HomeScreen update feature. No need to reboot to see forecast or layout changes. This option is turned off by default because it doesn't work for everybody. If you turn it on and you see problems with your phone's radio turning off, phone becoming very slow etc... turn it off. (it's option #10)
- Added new panel to the Settings panel at the bottom for easy access to the weather updates and settings.
- "Stardock icons" are default for forecast and regular panels.
Screenshot descriptions:
1- IPhone Layout (this is the default layout)
2- Forecast Panels screenshot
3- Slim Panels Layout with the background options enabled
4- HTC Slim Layout while updating
5- HTC Slim Layout in normal mode
6- The HomeScreen with the weather plugin in its "condensed" state at the bottom, showing current conditions
7- Regular Panel Layout with no background.
8- IPhone Slim Layout
Download link > http://www.sendspace.com/file/4mh11j
Vox Version (Currently still at 3.0.1) > http://www.sendspace.com/file/0bie7d
Current Version: 3.1
Changes in 3.1
- Rearranged the order the various subroutines run.
- Fixed autoupdate issue.
- Removed HTC icons and background PNGs from the cab. Please download them separately from the addons post if you plan to use those layouts.
- Added option to show extended forecast panels on the homescreen or not.
- Added detection routine to detect if your phone's keypad is locked and NOT to update the homescreen is that's the case. Should help with the "Phone - Incoming" message problem that's been reported
- Edited some CPRs for better alignment
- More verbose status messages
- Etc...
More to come soon. The next version will update your clock panel with current conditions info. Just wanted to get this update out of the way first.
Changes in 3.0.1:
- Added 6 day forecast layout.
- Autoupdate feature based on Yahoo server's time.
- Small bugfixes, revised Options panel.
- Compressed PNGs.
- Complete portrait support for the new 6 day layout.
- Background used in screenshots included in .cab.
Changes to 2.0.3:
- completely redesigned Options panel. Hopefully things will be easier to get around. Now it tell you what the current layout used is.
- Fixed HTC Layout (5) text not wrapping down issue.
- Added option NOT to check for internet connection before connecting.
- Options panel keeps track of what layout you're running.
- added blue, purple, WM7 style or original glass panel selection to options panel.
- updated portrait CPRs.
- forecast panels should now display "N/A" icons when a forecast is not available instead of a red x.
- ability to choose between european ("rest of the world pretty much...) or american style dates on the forecast panels.
If you like this application and feel the need to support my work, here's a link to donate to me via PayPal.
PayPal Donate Link
DO NOT install this to the storage card. It will not work that way!
p.s. Portrait support is included for the new 6 day layout.
p.s.s. The cab seems to take a few minutes to install, especially if you're installing over 2.0.3. So just be patient I guess...
Update to 3.1
Only install this if you have 3.0.1 or 3.0.2 installed. Otherwise, download the cab in the sendspace link above and install the whole app.
This is the "addons" post.
Added "NRG Power Key..... .cab This will add three options to the menu that comes up when you hit the power key on the side of your Excalibur. "Power off", "Reboot" and "Weather Update". I hope they're self explanatory Have fun. Take note your wireless manager might be gone, or might act erracticaly. If you have problems, just install the cab. Don't post in the thread about it, there's nothing I can do about it.
Download the Calibri font mod if you want your system font to look like the one in the screenshots.
The Yahoo, Spil, Novaweather and 7Degree icon sets are alternative icons sets for most of your layouts and extended forecast panels
Most of the icons sets install as a one time installation application. Which means you will not see it in the "uninstallable" list of program under "Settings". Once you run the cab, it will overwrite whatever icons are installed and that's it...
Reserved... the last one.. I promise
Looks niiice i will be testing on Portrait (tornado)
Good Job
So far so good on my Q9c. Last version had to be uninstalled due to a couple of crashes. The worst being when I plugged into the computer the home screen crashed and would not recover after a reboot.
Like the new layout.
Formatting on QVGA
Incredible progress!
I've attached two SS's from my QVGA, using your layout #9 (Standard 6 day which is only 4 day by the way). As you can see, the bottom Temps are not lined up in either F or C and I looked at the CPR, but it is like Greek to me... I see "Bottom Temps" but fiddling and restarting gives me either to the Right or Left - I don't suppose there is a GUI for modding these CPRs is there?
Can you assist in getting it all lined up?
Thanks and keep up the GREAT work! Expect some more PayPal coming your way!
The new layout looks beautiful. The one thing i might suggest: You may want to add an option in advanced options to turn off the 10 day forecast. Since it appears that im going to be using this 6 day testpluginui ( and several others will be too) they may not want or need the additional 10 day forecast panel.
I personally know how to disable it via the registry, but others may not. Secondly, If that option is de-selected, if you can also put in the weather.mscr file to not update that panel, so that way the weather updater runs a little faster.
Edit: I also think that today's Hi/Lo under the city needs to be removed. Its kind of redundant info, since the same info is located in the 6 day forecast located in the first day of the 6 day forecast.
This will also allow more room for lengthier weather condition names.
Damn,
Free service is at full capacity, hope someone can mirror it later.....
I'm anxious to try it
I installed on my Q9c and I still get that font issue with large text boxes in PIE, however, I'm willing to put up with it at this point since the 6-day layout means I don't have to reboot the phone to see the latest forecast.
Any idea what might be causing the font issue? Since this weather panel is basically just scripts reading XML files and making registry changes, I can't imagine that it'd be too hard to figure out what's causing the PIE font issue. The font issue isn't a huge deal and I'd completely ignore it if it weren't for the fact that the digital font makes no differentiation between upper and lower case and many special characters just show up as boxes.
I dumped the 10-day panel and added a link to the Weather Update in my links panel if I ever decide to manually update the weather.
Dees_Troy said:
I installed on my Q9c and I still get that font issue with large text boxes in PIE, however, I'm willing to put up with it at this point since the 6-day layout means I don't have to reboot the phone to see the latest forecast.
Any idea what might be causing the font issue? Since this weather panel is basically just scripts reading XML files and making registry changes, I can't imagine that it'd be too hard to figure out what's causing the PIE font issue. The font issue isn't a huge deal and I'd completely ignore it if it weren't for the fact that the digital font makes no differentiation between upper and lower case and many special characters just show up as boxes.
I dumped the 10-day panel and added a link to the Weather Update in my links panel if I ever decide to manually update the weather.
Click to expand...
Click to collapse
It may be the chome_320X240.cpr file in your /windows directory. When you load a layout. his program pulls .cprs from the chomeweather directory and replaces your original chome_320X240.cpr file ... you may uninstall. copy over your chome320X240.cpr file do your PC's desktop and open it and whatever .cpr file you use for the weather layout and compare the differences.
Glad you guys like it. I'm sorry the portrait guys are still experiencing issues, like the misalignment of the bottom temps. However, the issue needs to be taken care of in the weather.mscr file, not the cpr file. I think I will switch to png rendering of the bottom temps instead of relying on text handled by the plugin. It's just not reliable at all and the temps are always a little misaligned....
Look for 3.0.1 at the end of the day... LOL
pudgedaddy said:
The new layout looks beautiful. The one thing i might suggest: You may want to add an option in advanced options to turn off the 10 day forecast. Since it appears that im going to be using this 6 day testpluginui ( and several others will be too) they may not want or need the additional 10 day forecast panel.
I personally know how to disable it via the registry, but others may not. Secondly, If that option is de-selected, if you can also put in the weather.mscr file to not update that panel, so that way the weather updater runs a little faster.
Edit: I also think that today's Hi/Lo under the city needs to be removed. Its kind of redundant info, since the same info is located in the 6 day forecast located in the first day of the 6 day forecast.
This will also allow more room for lengthier weather condition names.
Click to expand...
Click to collapse
I was gonna say EXACTLY what you just said. lol.
pudgedaddy said:
The new layout looks beautiful. The one thing i might suggest: You may want to add an option in advanced options to turn off the 10 day forecast. Since it appears that im going to be using this 6 day testpluginui ( and several others will be too) they may not want or need the additional 10 day forecast panel.
I personally know how to disable it via the registry, but others may not. Secondly, If that option is de-selected, if you can also put in the weather.mscr file to not update that panel, so that way the weather updater runs a little faster.
Edit: I also think that today's Hi/Lo under the city needs to be removed. Its kind of redundant info, since the same info is located in the 6 day forecast located in the first day of the 6 day forecast.
This will also allow more room for lengthier weather condition names.
Click to expand...
Click to collapse
I second that, the testui pluig in is enough for me, I already remove the welcome center because is no need to get it on the screen, anyway it looks besutiful, great work......
Great work as always, man. Amazing how you fit so much information in such a small place.
Personally, I'm sticking with the NRG Slim layout for now. Going for the "less is more" effect
Whats Vox version and how do i get my NRG Colored panels with the 5 day forcast like on PIcture 4?
pudgedaddy said:
The new layout looks beautiful. The one thing i might suggest: You may want to add an option in advanced options to turn off the 10 day forecast. Since it appears that im going to be using this 6 day testpluginui ( and several others will be too) they may not want or need the additional 10 day forecast panel.
I personally know how to disable it via the registry, but others may not. Secondly, If that option is de-selected, if you can also put in the weather.mscr file to not update that panel, so that way the weather updater runs a little faster.
Edit: I also think that today's Hi/Lo under the city needs to be removed. Its kind of redundant info, since the same info is located in the 6 day forecast located in the first day of the 6 day forecast.
This will also allow more room for lengthier weather condition names.
Click to expand...
Click to collapse
Point taken. I will remove the "hi -lo" in the top left corner and make enabling the welcome center an option
Excuse me for the question, but will this app work on regular WM6, or it only works with WM 6.1 Chome?
No chances to have a version for WM6?
luckyland said:
Excuse me for the question, but will this app work on regular WM6, or it only works with WM 6.1 Chome?
No chances to have a version for WM6?
Click to expand...
Click to collapse
this app is specifically written for the sliding panel homescreen. The sliding panel homescreen is only available on the WM 6.1 platform. So no. it does not and will not work on the WM6 interface
I've got the shakes...
Oh man... I SO wanna download this and "finagle" while I'm here at work, but I'll need to edit my cpr and it's too cumbersome trying to do it from the phone (instead of on my PC desktop). Blast! My love for boldened titles hinders me from enjoying this .cab this instant! lol
For Feather Weather 2, click HERE
Portrait Version Now Available!
The smallest weather app available has just gone on a diet, it started at 950kb and now comes in at a lightweight sub 850 kb. Its been slimmed down in size but not in weather data available. The new TotalClock cab has the full five day and current conditions within the clock panel itself. Check out the screenshots below, you only see one day at a time for a nice clean look. Hit the right soft key to advance thru the days and when you done, it has a timer to reset itself to current conditions after 60 seconds of non-flipping of the forecast pages.
For those who would rather have it seperate, the original version still uses a seperate forecast panel along with current conditions only in the clock panel. But even though it hasn't changed, I have managed to squeeze another 100 kb off of it.
On the original version clock panel you get info for current: temperature, icon, real feel temp, winds, humidity, visibility, barometer, uv level, cloud cover, precipitation, sunrise, sunset, air quality levels, and dewpoint. Also, on the clock panel you get tomorrow's forecast: conditions, hi/lo temperatures, real feel high temps, winds, and estimated precipitation.
On condensed clock panel, there is current temp, current condition icon, time, and todays Hi/Lo temperatures. So if you dock your clock, you will always have weather and time showing on homescreen.
And for a full forecast, there is a 5 day forecast panel that can be enabled or disabled. The forecast pages have info for: day, date, conditions, hi/lo temperatures, precipitation estimates, uv levels, and winds expected.
Both have a user set time interval for the updates depending on your needs, wants, or data plans. Just go to setup and specify the interval in minutes. The default is 30 minutes. The forecast data updates every 8th time weather update runs, that way you get updated forecast info every 4 hrs if you use the default for current condition updates.
To install: For now, install to main memory, I'm working on either or version.
Download the cab. After installation, it should prompt you to restart. If it doesn't, then restart your phone to set new clock panel in place. After reboot, wait about 10 seconds and the FeatherOptions will run automatically. Go to Setup and set all of your info, good idea to go ahead and set your right soft key on the clock panel at this time. After setup, exit options by selecting "Run Weather Update and Exit".
That's it, your done.
NOTE: I beleive I worked out my problem with mortscript registering itself, but if it doesn't auto start the options after 10 seconds, then go to FeatherWeather folder in Program Files and click on Mortscript.exe .
To uninstall: First download the ResetClockPanel.zip below. Unzip and then place the .mscr file on your phone. Run it with File Explorer, this will reset your clock panel. Now go to Settings/Remove Programs and uninstall the cab.
City Location Codes:
For anyone that needs to find their city code, use this link and change the location in this url to the name of your city and then go to it and it will give a list of all cities worldwide that have that name. Get your location from there and enter it exactly as it appears in the quotes, but do not use the quotes.
http://hadle.accu-weather.com/widget/hadle/city-find.asp?location=calcutta
So, for this link above, if you were looking for Calcutta, India. Go to this link, and you will see a line like this:
<location cnt="1" city="Calcutta" state="India(Bangla)" location="ASI|IN|IN036|CALCUTTA" />
So your location to enter in to options would be :
ASI|IN|IN036|CALCUTTA
This should work for cities worldwide.
Feather currently is installed with a slim panel layout only. If you want more dll or cpr options, they are easily installed with FileChanger. Those are more homescreen customizations than they are weather customization, thats why they aren't in here.
For landscape phones: If you don't want the slim panels, I have standard panels cpr and mini panels cpr that work specifically with FeatherWeather. They are in the Featherscprs.zip below. Just install with the FileChanger app or copy into windows folder. Click on the File Changer in my signature below for the File Changer thread and download.
New Portrait versions below, the last 2 cabs that names end with "P" are the portrait versions. Portrait versions updated 8/19/08 with new cpr. If you already installed, you can download the cpr zip only and install to windows directory.
Check out these new portrait layouts provided by Kron2:
Make sure you get the landscape or portrait version you need, first 2 are Landscape, last 2 are Portrait
NOTE: There was a slight change in the feed. So after installing one of these cabs, please go to Post #101 and download the forecast fix.
showaco said:
Here's the smallest Weather app available. It weighs in at only 950 kb. Its been slimmed down in size but not in weather data available. It has current conditions and a five day forecast.
On the clock panel you get info for current: temperature, icon, real feel temp, winds, humidity, visibility, barometer, uv level, cloud cover, precipitation, sunrise, sunset, air quality levels, and dewpoint. Also, on the clock panel you get tomorrow's forecast: conditions, hi/lo temperatures, real feel high temps, winds, and estimated precipitation.
On condensed clock panel, there is current temp, current condition icon, time, and todays Hi/Lo temperatures. So if you dock your clock, you will always have weather and time showing on homescreen.
And for a full forecast, there is a 5 day forecast panel that can be enabled or disabled. The forecast pages have info for: day, date, conditions, hi/lo temperatures, precipitation estimates, uv levels, and winds expected.
It has a user set time interval for the updates depending on your needs, wants, or data plans. Just go to setup and specify the interval in minutes. The default is 30 minutes. The forecast data updates every 8th time weather update runs, that way you get updated forecast info every 4 hrs if you use the default for current condition updates.
To install: Download the cab or the zip file. The zip file has the exe file for installing thru ActiveSync, just unzip it first. After installation, it should prompt you to restart. If it doesn't, then restart your phone to set new clock panel in place. After reboot, go to start menu and run FeatherOptions. Go to Setup and set all of your info. After setup, exit options by selecting "Run Weather Update and Exit".
That's it, your done.
To uninstall: Go to Settings, Remove Programs and uninstall the cab. It won't change your clock panel back, but it will remove everything else. To revert clock panel back, install an original cpr or cpr of your choice.
Feather currently uses a slim panel layout, but I will add more support if anyone wants standard or fat panels. If you want more dll or cpr options, they are easily installed with FileChanger. Those are more homescreen customizations than they are weather customization, thats why they aren't in here.
Click to expand...
Click to collapse
how is it that you have 3g on that phone what service provider do you have?
RussianSolja said:
how is it that you have 3g on that phone what service provider do you have?
Click to expand...
Click to collapse
show doesn't have a dash. he has a blackjack and is on the at&t network
pudgedaddy said:
show doesn't have a dash. he has a blackjack and is on the at&t network
Click to expand...
Click to collapse
shhhhh!! I'm masquerading as a dash.
Nice and sweet and at that size, I'm downloading now and disabling NRG Mini Weather to see how it compares but the size is the enticing factor me, cool, thanks
First post updated with two new cabs, here are the standard sized panels and the mini sized panels cprs that work with Feather below in the zip file. I also included the slim cpr for going back to.
Good weather application. Seems nice, but I will give it a shot later to see how it works...
showaco are you going to make Feather weather for 240x320 screen i have a shadow and would love to try your weather loveing your sports app
kron2 said:
showaco are you going to make Feather weather for 240x320 screen i have a shadow and would love to try your weather loveing your sports app
Click to expand...
Click to collapse
The app only needs the cpr file adjusted for the clock panel layout to be ready to go. I have no way to test the layout, so it would be a total guess. If someone wants to make the cpr, or I could post a test version. A test version would probably have to be tweaked after installed to get the layout just right. You want to test? I can take a stab at the layout if you want to finish the final tweaking of positions.
Edit: If you want to pm me your email, I have a test cpr ready if you want to try it.
When I try and run Feather Options, I get and error: There is no application associated with "FeatherOptions"
I installed the CAB to the device memory. I get a generic clock icon and some weather info.
Thanks for any help, and of course for the nice plugin (once I can get it to work) I'm on a Moto Q Global.
braj108 said:
When I try and run Feather Options, I get and error: There is no application associated with "FeatherOptions"
I installed the CAB to the device memory. I get a generic clock icon and some weather info.
Thanks for any help, and of course for the nice plugin (once I can get it to work) I'm on a Moto Q Global.
Click to expand...
Click to collapse
Sometimes mortscript doesn't register correctly on my cab installs. Go to program files\featherweather and find the mortscript.exe. Click on it and it will say that the extentions are registered. Now try again.
showaco said:
Sometimes mortscript doesn't register correctly on my cab installs. Go to program files\featherweather and find the mortscript.exe. Click on it and it will say that the extentions are registered. Now try again.
Click to expand...
Click to collapse
Awesome, thanks for the quick reply. Now I can run setup and get a forecast, but I still don't have a image, it shown a grainy white clock placeholder.
But progress has been made!
I just tried to uninstall this until I get the display issue resolved, and I get the following error occasionally: Cannot execute \Program Filea\FeatherWeather\Feather.exe
Please help.
braj108 said:
I just tried to uninstall this until I get the display issue resolved, and I get the following error occasionally: Cannot execute \Program Filea\FeatherWeather\Feather.exe
Please help.
Click to expand...
Click to collapse
download sktools lite, its free. With it you can remove the notifications which are causing the error. If you want to reinstall, let me know which version you are using and I will get your icon fixed. If its the total clock version, the reason you didn't get the icon is because of not mortscript not registering at the beginning. It writes the value for the iconpath when the reboot occurs, but it needs mortscript to do it. Its an easy fix. After install, if mort doesn't register again, then reregister mortscipt again. After that, while you are in the featherweather folder, click on install.mscr. This will setup your icon for the clock panel and start your setup when it finishes.
I just reinstalled and rebooted my phone, and when the plugin came up, all seemed good then the screen died! It couldn't come on. I just got the phone and the first one AT&T shipped me had a bad backlight so I thought the worst, then I pulled the battery and rebooted again. Now the sun is shining gloriously on my Q Thanks, it was a little rocky but it sure looks nice. I really appreciate teh help getting this running, kudos to you sir.
braj108 said:
I just reinstalled and rebooted my phone, and when the plugin came up, all seemed good then the screen died! It couldn't come on. I just got the phone and the first one AT&T shipped me had a bad backlight so I thought the worst, then I pulled the battery and rebooted again. Now the sun is shining gloriously on my Q Thanks, it was a little rocky but it sure looks nice. I really appreciate teh help getting this running, kudos to you sir.
Click to expand...
Click to collapse
No problem, I'm still trying to figure out why mort doesn't always register correctly because thats the culprit in most problems that have been reported.
Portrait version is now available for download in post #1. Huge Thanks go to Kron2 for the work on the cpr layout for these two new portrait cabs.
I have installed the portrait total clock version in my HTC VOX. It runs fine. But it is not updating weather for my town. I live in Calcutta, India. After a lot of googling for getting accuweather codes, I tried the following in settings but none seemed to work.
ASI/IN/IN036/CALCUTTA
"ASI/IN/IN036/CALCUTTA"
INO36
CALCUTTA
Can anybody help me as to how to insert the code for my hometown Calcutta as I have liked the application very much and does not feel to ditch the same. Although it is not a forum for VOX I had to write in this forum as there are no threads for Feather weather in VOX forum.
Moreover, would anybody please give the link to the slide homescreen in Portrait version as posted in post no. 1.
Thanks in advance.
parthabhatta said:
I have installed the portrait total clock version in my HTC VOX. It runs fine. But it is not updating weather for my town. I live in Calcutta, India. After a lot of googling for getting accuweather codes, I tried the following in settings but none seemed to work.
ASI/IN/IN036/CALCUTTA
"ASI/IN/IN036/CALCUTTA"
INO36
CALCUTTA
Can anybody help me as to how to insert the code for my hometown Calcutta as I have liked the application very much and does not feel to ditch the same. Although it is not a forum for VOX I had to write in this forum as there are no threads for Feather weather in VOX forum.
Moreover, would anybody please give the link to the slide homescreen in Portrait version as posted in post no. 1.
Thanks in advance.
Click to expand...
Click to collapse
You have the right code, sort of. instead of "/" , you need "|". I tried it and it works, so for you code enter:
ASI|IN|IN036|CALCUTTA
For the theme, thats Kron2's theme. You may be able to find it at allshadow.com or by contacting him.
For anyone that need to find their city code, use this link and change the location in this url to the name of your city and then go to it and it will give a list of all cities worldwide that have that name. Get your location from there and enter it exactly as it appears in the quotes, but do not use the quotes.
http://hadle.accu-weather.com/widget/hadle/city-find.asp?location=calcutta
First of all i am very sorry to ask this stupid question as you have narrated the same example in your post 1. Actually I was too excited and overlooked that part. Anyway I am trying to find out the "|" character in my keyboard. Many thanks to you.
I've seen some orange home screen for spv c550 or c600 mobile. It has two columns and it is very helpfull home screen solution.
Have you tried yet to install that kind of home screen layout.
xmarkom said:
I've seen some orange home screen for spv c550 or c600 mobile. It has two columns and it is very helpfull home screen solution.
Have you tried yet to install that kind of home screen layout.
Click to expand...
Click to collapse
Do you have screenshot or link?
10507 said:
Do you have screenshot or link?
Click to expand...
Click to collapse
just google L-Columns.v2.home.xml and i found that you need some orange.dll but i don't know where to put it.
This theme mentioned above has facade and fizz weather in one column.
also orange default theme in SPV smartphone models has nice solution but you cannot access with xml. When i open orange.home.xml there are only few lines. Some basic stuff as title, icon bar and organge plugin function in couple of lines.
If someone figures out how to successfully create columns in a CPR I will be ecstatic. I have tampered with the Columns="" and Rows="" parameters in the Titanium CPR so much, and still can't find a way to do it. For now, I dont actually think it is possible to have a two-column or two-row CPR Homescreen (at the moment). I do hope this gets some attention (and maybe a solution)!
Cyclonezephyrxz7 said:
If someone figures out how to successfully create columns in a CPR I will be ecstatic. I have tampered with the Columns="" and Rows="" parameters in the Titanium CPR so much, and still can't find a way to do it. For now, I dont actually think it is possible to have a two-column or two-row CPR Homescreen (at the moment). I do hope this gets some attention (and maybe a solution)!
Click to expand...
Click to collapse
I've found solution and it works.
As i said just download L-Columns.v2.home.xml and install JRulez_OHSP.cab because it saves orange.dll somewhere in the phone.
Now i have RJTime (analog) clock and date on the left side of my home screen and SMS/MMS/Mail on the right side.
I still dont get why every uploaded theme and every thread about home screen design in this Excalibur subforum is about C-home theme.
My personal opinion is that you can create most powerfull theme, most "business one" theme in classic way, creating good xml theme with couple of plugins and couple of programs as RightKey etc.
xmarkom - Can you please upload these files to this thread, or post direct links to them. i would be very interested in making a theme using this concept (and adding it to my CycloneSkins collection). I tried google, but I couldn't find anything relevant.
Thanks a bunch!
(By the Way the "CHome" layout is named because of the CHome panel which is the panel which tells you how many missed calls, SMS, MMS, and Voicemail you have. This panel is a significant part of the CHome layout in terms of efficiency. I believe that is why it is called the CHome layout, although in the 6.5 roms it is the Titanium Layout, and in 6.1 and below it is called Sliding Panels Layout)
any screnshots??
Cyclonezephyrxz7 said:
xmarkom - Can you please upload these files to this thread, or post direct links to them. i would be very interested in making a theme using this concept (and adding it to my CycloneSkins collection). I tried google, but I couldn't find anything relevant.
Thanks a bunch!
(By the Way the "CHome" layout is named because of the CHome panel which is the panel which tells you how many missed calls, SMS, MMS, and Voicemail you have. This panel is a significant part of the CHome layout in terms of efficiency. I believe that is why it is called the CHome layout, although in the 6.5 roms it is the Titanium Layout, and in 6.1 and below it is called Sliding Panels Layout)
Click to expand...
Click to collapse
ok but i'm seek of this titanium layout and sliding panels layout because everybody talk about that, and thats all the same thing.
xml traditional home layouts should be better.
Wouldn't agree and if i personally wanted a old home screen i'd stick with WM6 to which is cumbersom looks like a dinosaur and not as tweakable as 6.1 or 6.5.
Can you please upload the files that peeps asked for as a google search with that criteria will get them no where...
please post link, i would like to have this
Hi everyone, I am a cooker ( doing great things, but mainly a noob one compared to some masters out there ) .
Cooking on the Omnia I900 & Acer S200 ( french rom only), these devices have low memory.
For example the acer S200 only has 256mb of ram, but mainly the same hardware than the powerful HD2(except ram....:-( )
Arto ( great cooker of the Acer S200 scene ) has found that removing the start menu completely gains 15mb Ram on our devices ( by fooling the system with empty .cpr grid, icons caches aren't generated.)
This can help people make really light roms!!! The main problem now is the we don't have here a real startmenu alternative, a eye candy one than keep the spirit of our devices... Quickmenu is functionnal but not too beautiful.
After many searches over xda, the only thing I found was Quickmenu and the sense Startmenu replacement ( I modded the kenia1234 startmenu replacement to give it 5 columns, here is the work : 5 columns start sense2.5 menu replacement )
I don't know why developper aren't interested in making a real , fast and beautiful startmenu replacement ( with full fonctionnality, at least control panel wikth .cpl files abilty, and even more folder architecture, fullscreen, lightweight ),
but here is the request or that, If others than me are interested, please reply and tell your needs, to help developpers...
Something like Panoramic Launchpad would be great!
Last week I started creating a startmenu alternative. It's very underdeveloped, and I have no idea when it's finished, but to give you an idea I attached two screenshots.
It still lacks a couple of features (if someone can point me in the right direction, please do so ):
- no control panel items yet
- no icon transparency (I got that working, but it was horribly slow)
- no background (because of the lack of transparency)
- no hook on the hardware windows key (like quickmenu)
- no hook on the software start button (like ameba does on winmo 6.5.x)
- if there's no png file attached to a link, no icon is displayed
But the other basics are working:
- starting programs by clicking (yes I know, very basic )
- flipping pages by swyping your finger (left->right, right->left, up->down, down->up)
- opening folders, and going back up one level with the left soft button (just like the usual start menu)
I actually started this because I'm not a fan of the hexagon grid styled start menu, not because of memory issues. I did take a look at the current memory usage of my start menu, and currently it is 1.41MB. But that will grow with more icons and transparency I guess.
If you're interested I can continue developing this startmenu.
The most important thing to me is ram usage, the lower it is the best it is,
the png file limitation to display an icon should be reconsidered, the ability to display native icon is much more important, or, much easily to program, you can make your app request the "HKLM\Security\StartInfo\Start\myprog.lnk" key to read the icon you should display, if nothing is entered, lets just start the native icon.
This is important to make your startmenu replacement user friendly. nobody likes assigning manually an icon to an app, having the ability to do it is good, but the most important for the users is that your program automaticaly displays the native icon like the start menu does.
To use cpl, you just have to use a ctlpnl.exe command line, like this :
ctpnl.exe mycpl.cpl
if cpl has multiple tab, ctpnl.exe mycpl.cpl,1 ( where the number is the tab you want to be open)
for cpl files, I thinks its the big part of the job :-(
What I meant with:
- if there's no png file attached to a link, no icon is displayed
Click to expand...
Click to collapse
My program uses the icons set in HKLM\Security\Shell\StartInfo\Start, but if it's an older program, there might not be a high resolution icon, and in that case I won't display any icon. That's something I will fix ofcourse.
I'll have a look at the cpl files, and I guess google will help me there as well.
Also looking for a way to show my startmenu instead of the winmo startmenu, but no luck so far. If anybody knows how to catch when the winmo startmenu is activated in c#, please let me know.
Hi guys
Have you ever heard of iPhoneToday http://forum.xda-developers.com/showthread.php?t=633618 ? It's so light and configurable
XTask has a good looking, light start menu replacement.
If you leave out the start_icon.png's, then the native icons are used. The 6.5 start menu also slows down boot time dramatically. Just delete all the shortcuts, soft reset, and check the millisecondtoidlethread in hkcu/performance. Boot time may be 20-30 seconds faster.
vinvv said:
Last week I started creating a startmenu alternative. It's very underdeveloped, and I have no idea when it's finished, but to give you an idea I attached two screenshots.
...
If you're interested I can continue developing this startmenu.
Click to expand...
Click to collapse
This certainly looks very interesting! Please continue, I also hate the honeycomb (as many people around).
I like this
vinvv said:
What I meant with:
My program uses the icons set in HKLM\Security\Shell\StartInfo\Start, but if it's an older program, there might not be a high resolution icon, and in that case I won't display any icon. That's something I will fix ofcourse.
I'll have a look at the cpl files, and I guess google will help me there as well.
Also looking for a way to show my startmenu instead of the winmo startmenu, but no luck so far. If anybody knows how to catch when the winmo startmenu is activated in c#, please let me know.
Click to expand...
Click to collapse
Hi m8
I also hate the startmenu but this is cose it eats arround 30mb of ram...
There is a way to disable the default startmenu ....
Look this post its working fine on Blackstone NRG roms.
http://forum.xda-developers.com/showpost.php?p=7911317&postcount=16270
I just dont like the replacement menu or the quickmenu
Your app can be assigned to startmenu button with ameba
If can i help with your project on this just let know
Also keep in mind that many shells (Throttle Launcher, Mobile Shell etc) read the data to load program shortcuts from the start menu, so that the replacement has to take care of that too.
what do you think about wisbar 4? would this be an alternative to quick menu? i was using this prog. a year ago and i was totaly impressed. now i use it again together with the new energy rom from august 28. after the replacement from the start menu i have real nice and fast blackstone