I have seen several posts and no apparent solution for a problem where the Full Qwerty keyboard will not change from a Phone Keypad with no letters - just numbers and a p and a w
Here is the fix ...
http://forum.ppcgeeks.com/showthread.php?t=85041&highlight=full+qwerty+keyboard
I would put in the Wiki if I knew how
jcrompton said:
I have seen several posts and no apparent solution for a problem where the Full Qwerty keyboard will not change from a Phone Keypad with no letters - just numbers and a p and a w
Here is the fix ...
http://forum.ppcgeeks.com/showthread.php?t=85041&highlight=full+qwerty+keyboard
I would put in the Wiki if I knew how
Click to expand...
Click to collapse
You could have just posted the fix here, rather than just the link.
HKLM\Software\Tegic\eT9\Ime
"CurrentET9Style"="0"
That's really a good point that you have made - I wish I had thought to do that
But thanks for taking the opportunity to be show that you are obviously more intelligent than I am
Related
Hi All
Does anyone know how to change the Battery Icon on the new ROM. This is the same screen when I was back using the Hima05.
Hey, Buzz sir, could you give us a flash on this? I have searched for the Reg but without luck.
Thank
Julius
I don't know how to do this, but check this post, it's a small plugin that replaces the standard date/time plugin with configurable format and internet (swatch) time support!!
http://www.pocketpt.net/forum/index.php?act=ST&f=6&t=8229
Here's a screenshot of it!
neat Though not seeing a download link (might have to be logged in, I suppose). But getting rid of the battery icon altogether would be nicest for the matter at hand
ZeBoxx said:
neat Though not seeing a download link (might have to be logged in, I suppose). But getting rid of the battery icon altogether would be nicest for the matter at hand
Click to expand...
Click to collapse
The download file is found near the bottom of the page file name: TodayTimeCab.zip (16.2k)
Hope you like it!!
I'm still improving it, so any bugs detected or sugestions are very much welcome and apreciated!
Looks nice,
an option to add the week number shuold be nice.
I can't really give suggestions as I've poured a bunch of cash into a project much like it - figures, two projects that are very much like it pop up right after I do so, and a long time after I openly requested it. That's life eh ?
But here's two bugs
- even though you seem to imply that seconds are accepted, it doesn't seem to update per-second
- when installing, add Selectability=1 to make sure users can navigate to the item with the d-pad/arrows and use the OK/enter button to 'tap' it so they can enter the date/time/alarm/etc. controls
ZeBoxx said:
I can't really give suggestions as I've poured a bunch of cash into a project much like it - figures, two projects that are very much like it pop up right after I do so, and a long time after I openly requested it. That's life eh ?
Click to expand...
Click to collapse
True, true...
ZeBoxx said:
But here's two bugs
- even though you seem to imply that seconds are accepted, it doesn't seem to update per-second
Click to expand...
Click to collapse
I knew that, I did that on purpose because refreshing the screen that many times didn't seem to be a good option...
I'll test this one better and give it some thought
ZeBoxx said:
- when installing, add Selectability=1 to make sure users can navigate to the item with the d-pad/arrows and use the OK/enter button to 'tap' it so they can enter the date/time/alarm/etc. controls
Click to expand...
Click to collapse
Done!!!
How done?
Did you update the attachment at http://www.pocketpt.net/forum/index.php?act=ST&f=6&t=8229 ?
Conchas said:
How done?
Did you update the attachment at http://www.pocketpt.net/forum/index.php?act=ST&f=6&t=8229 ?
Click to expand...
Click to collapse
Yep, check the attachment, it should read "TodayTimeCab_0.1.0.1.zip"
(é bom ver tugas por aqui também!)
Good work! New Battery at TitleBar is really annoying...
A few suggestions, if it is not asking too much
- Internet Time should be inserted with proper syntax configuration (for instance 'i, HH:MM' or '@, HH:MM'). This way user could choose to have it or not.
- Font size configuration would be also very welcomed. I use Today font size at the minimum, but for TodayTime I'd like to see it larger.
- When Today screen displays a lot of items and the left scrollbar gets displayed, it overlaps left part of time string
I was able to overcome this inserting a few sapces at end of time format string. However it would be nice to have it always right justified.
(Há Tugas por todo o lado )
In order to speed-up confgurations after Hard Resets... I'm installing 'TodayTime' among several other apps, from ExtROM and customize settings via a cab file at ExtROM also.
It happens that 'date' and 'time' format strings are stored into registry, at keys with very unusual names (see bellow).
In fact they include special characters like horizontal TAB (HT) and Vertical TAB (VT), where spaces seem to be.
...it must be something automatically generated...
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Today\Items\TodayTime]
"RightFormat TodayTime(Software\\Microsoft\\Today\\Items\\TodayTime"="HH:mm "
"LeftFormat RightFormat TodayTime(Software\\Microsoft\\Today\\Items\\TodayTime"="yyyy MMM dd, ddd"
This causes a lot of problems to loaders (specially the VT), and in fact didn't find a solution yet.
Can't you use more "regular" registry key names!?
e.g.
"RightFormat"
"LeftFormat"
might be good to move the topic of the TodayTime today item to a new thread, and get this thread back on topic: removing the battery icon from the taskbar in AKU2 roms.
Conchas said:
Can't you use more "regular" registry key names!?
e.g.
"RightFormat"
"LeftFormat"
Click to expand...
Click to collapse
That's a bug, it should be as you wrote it!! I'll fix it today
ZeBoxx said:
might be good to move the topic of the TodayTime today item to a new thread, and get this thread back on topic: removing the battery icon from the taskbar in AKU2 roms.
Click to expand...
Click to collapse
You're right! I'll create a new topic on the next update!
yes i already posted this in the raphael thread but no one seems to know the answer so i thought i would post here. thanks
I am using the htc T9 keyboard and i am trying to figure out how to get it to give me a list of words after the first letter is typed. as it stands right now its gives me a list of words after 3 letters. i have tried going to settings input and word completion but it does not works as i think that is for the winmo default keyboard. i have searched everywhere but i can't find the answer. thanks for the help in advance
bump bump
up up and away
partial answer located here: http://www.fuzemobility.com/?p=1527
thanks for the response
Hello guys,
Just received my device today and I am loving it to bits. Just one question tho and I haven't seen anyone asking this question.
When you go into SMS messages tab and click on new message. When I click on the 'to:' field, a numeral keyboard on screen keyboard is forced to be used (even tho I have chose full QWERTY keyboard). Haven anyone noticed that? That is the weird part but if you look closely, there is a 'P' and a 'W' key as well. Why those keys and no other keys.
I used to be able to type in the name of the recipient, now I have to use the hardware keyboard to do so, (I would like to have the option to use a soft keyboard, although I love the hardware one).
Also, I have noticed that the Numeral Pad for typing messages have now gone. It used to be on the HD. I thought it was quite useful when if was on the HD and find it was a good way for t9 messaging with one hand.
Anyone noticed?
Anyone????
Anyone knows what the keys P and W is for when entering receipiant details? I don't mind it but I just wanted to know why P and W and not any other letters.
P: Pause (1sec Pause before sending the tones)
W: Wait (doesn't seem to work on WM - on nokia phones there was a new dialog coming up - and you could decide when you'd like to send the remainig numbers)
Sorry double post
CHfish said:
P: Pause (1sec Pause before sending the tones)
W: Wait (doesn't seem to work on WM - on nokia phones there was a new dialog coming up - and you could decide when you'd like to send the remainig numbers)
Click to expand...
Click to collapse
Thanks a lot mate!
This is the first time I have seen this on a keypad. Never knew you need those keys.
But why would you need to pause before sending the tone?
cocoaju said:
Thanks a lot mate!
This is the first time I have seen this on a keypad. Never knew you need those keys.
But why would you need to pause before sending the tone?
Click to expand...
Click to collapse
sometimes u need this for using gateway services where it will ask for password/id before the phone number dialled (VOIP, teleconferance use etc)
you need the pause key; else the system will treat is as a very long number and ended up error
izudeen said:
sometimes u need this for using gateway services where it will ask for password/id before the phone number dialled (VOIP, teleconferance use etc)
you need the pause key; else the system will treat is as a very long number and ended up error
Click to expand...
Click to collapse
Cheers mate. That is really something I didn't know. Never used such systems or ever needed such a function.
You have enlightened me today!
can someone please provide some info about the t9 keypad that is missing....?
Is there someway to get t9 keypad like on the diamond 2?
I just bought this phone and i would be wery sad if there where no option for t9/phonekeys/keypad (onscreen of course)
Thanks...
Regards
Peter
Hey, everyone. I recently obtained a Palm 3245WW bluetooth keyboard. The device works great, pairing is really easy and once connected it works fine without any glitches. The keyboard is really easy to use, and hiding the on-screen keyboard is easy in order to have more workspace. After a couple of day's use, I am satisfied with the build quality, it really feels like a real keyboard and it is quite responsive. Even some (not all) of the keyboard shortcuts work!
My question is if anyone who has used the keyboards knows how of a key combination to enter the alternative inputs (such as accents, etc). I could use them when writing Greek, where the vowels can be accented. Otherwise, is there some way to alter the key mapping in order to define how the system reads certain key combinations? I have tried several combinations, such as alt+key or control+key or Fn+key, but to no avail.
Any directions would be appreciated!
Thanks!
Sav
P.S. Apologies if this the wrong place to post this!
Why did U open a new thread. There is already an existing thread. Now this is when I don't read and jump on to post your cap.
However, I don't have any experience with this keyboard so I cannot help on this.
Sent from my GT-I9100 using XDA Premium App
I searched around and did not find any threads on this particular keyboard on SGS2. I found a few threads regarding other phones (mostly unsuccessful attempts with this particular keyboard), so I thought I'd ask if anyone has used it with this particular phone.
Again, sorry if this is the wrong place to post, I am new here.
Thats ok matey, just do a comprehensive search next time.
Yesterday I received the 104.88 MB firmware update for Samsung Galaxy Note 2 ( GT-N7100) on Android 4.4.2. After updating my device I am facing a very annoying bug from Samsung Keyboard.
When I type something the keyboard predicts the word for example if I am typing 'Hel' it will predict the word as 'Hello'( which is great) but when you click on the predicted text it gives you two spaces automatically instead of one. It continues for each and every predictive text. If I turn off the auto spacing feature, no space is provided. So it is either zero or two but not one.
It is very annoying to keep deleting extra spaces between words of every sentence, especially when typing an email or tweeting where characters are limited.
It looks like this when you type with and without predictive text and auto spacing features.
Please help.
This is not a solution per se to your issue. But I would suggest that you ditch the Samsung keyboard and install SwiftKey from play store. It is now free. And much better than any other keyboard that I have tried. Give it a try.
Sent from my GT-N7100 using xda premium
Auto spacing issue in prediction
sstt767 said:
Yesterday I received the 104.88 MB firmware update for Samsung Galaxy Note 2 ( GT-N7100) on Android 4.4.2. After updating my device I am facing a very annoying bug from Samsung Keyboard.
When I type something the keyboard predicts the word for example if I am typing 'Hel' it will predict the word as 'Hello'( which is great) but when you click on the predicted text it gives you two spaces automatically instead of one. It continues for each and every predictive text. If I turn off the auto spacing feature, no space is provided. So it is either zero or two but not one.
It is very annoying to keep deleting extra spaces between words of every sentence, especially when typing an email or tweeting where characters are limited.
It looks like this when you type with and without predictive text and auto spacing features.
Please help.
Click to expand...
Click to collapse
I am also facing the same issue in my Samsung Galaxy Note 2 (GT-N7100).
Waiting for an answer/solution................
---------- Post added at 11:00 PM ---------- Previous post was at 10:34 PM ----------
Swift Key works fine and does not show auto spacing issues. But I don't want to ditch Samsung keyboard because Swift Key app doesn't support S Pen Handwriting mode but Samsung keyboard does it well. And I use both Keyboard and S Pen Handwriting mode depending upon situation (for example: I use handwriting mode when sitting comfortably and Keyboard+Prediction when I am on travel/commute).
Please someone help me and others having same issue. How can we get rid of this two space prediction issue on Samsung keyboard on SG Note 2?
sarkar_007 said:
This is not a solution per se to your issue. But I would suggest that you ditch the Samsung keyboard and install SwiftKey from play store. It is now free. And much better than any other keyboard that I have tried. Give it a try.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I just checked on my phone. The double spacing bug is indeed present in Samsung keyboard. We can only wait for an update from Samsung to resolve this issue. On the plus side, Swype keyboard is recognizing S-Pen input. So if you guys want you could try it. I am quite happy with SwiftKey. I mostly use flow input and SwiftKey is perfect for that.
Thanks for the reply.
I agree with you that Swype keyboard recognize S-Pen input if you use typing/swiping (flow input). But I don't think it is compatible for Handwriting mode with S-Pen.
As you mentioned, I am waiting (probably there are more like me) for an update from Samsung to resolve this double spacing bug in Samsung keyboard. Let us hope they will fix this bug soon.
sarkar_007 said:
I just checked on my phone. The double spacing bug is indeed present in Samsung keyboard. We can only wait for an update from Samsung to resolve this issue. On the plus side, Swype keyboard is recognizing S-Pen input. So if you guys want you could try it. I am quite happy with SwiftKey. I mostly use flow input and SwiftKey is perfect for that.
Click to expand...
Click to collapse
Any way we can make Samsung know about this?
I guys, I've just registered for this topic as I am facing the same problem. Since the last update (which I recall it was about a week ago) I am having the 2 spaces problem after I pick any of the suggested words. Now, is there any way we can make Samsung know about this? Like a bug report or something similar. I don't want to leave Samsung's keyboard because it worked just fine and I am used to it, plus it supports handwriting and well, I am just used to how letters are organised and the distance between them, I type fluently.
Any help will be welcomed, thank you guys!
I googled and found that there is a way and someone has already reported this bug/issue in Samsung Developers Forum.
Let us wait for a response from Samsung.
iNkenbiLL said:
I guys, I've just registered for this topic as I am facing the same problem. Since the last update (which I recall it was about a week ago) I am having the 2 spaces problem after I pick any of the suggested words. Now, is there any way we can make Samsung know about this? Like a bug report or something similar. I don't want to leave Samsung's keyboard because it worked just fine and I am used to it, plus it supports handwriting and well, I am just used to how letters are organised and the distance between them, I type fluently.
Any help will be welcomed, thank you guys!
Click to expand...
Click to collapse
Am experiencing the same double spacing issue with predicted text on the Samsung keyboard. Input using the Continuous Input function is fine though. Only touch type is messed up.
Build number: KOT49H.N7100XXUFNI4. This update was only about 84MB as opposed to the 104 MB update the OP received. Not sure of the release date but I only installed it yesterday.
Have installed SwiftKey to use in the meantime.
This topic creator, i.e. me, is the one who has reported in the Samsung Developer forum but still no response. I think it requires a 'famous' tech blogger to take this issue so that Samsung notices the problem. BendGate , GapGate but Note 2 users have SpaceGate !
Oh! I see, so it is you who reported this issue in Samsung Developer forum. Thanks for the information. Also thanks for posting it on Samsung Developer Forum, let us hope someone from Samsung Developers will notice it and do the needful. :fingers-crossed:
Like you and me there are a lot of Note 2 users who are waiting for a response from Samsung on this problem.
Let us hope and wait for a positive response from Samsung on this problem. :fingers-crossed:
sstt767 said:
This topic creator, i.e. me, is the one who has reported in the Samsung Developer forum but still no response. I think it requires a 'famous' tech blogger to take this issue so that Samsung notices the problem. BendGate , GapGate but Note 2 users have SpaceGate !
Click to expand...
Click to collapse
Double spacing
I've just started having the same problem after the upgrade. I hope someone fixes this as it's a real nuisance. I've turned auto space off. You get so used to typing in a particular way then discover thatihavejustwrittenasentencewithnospaces.
Double spacing issue on SG Note 2 Resolved!
I just got an update of around 60 MB size and the double spacing issue no longer exists. Thanks to Samsung!
kingletit said:
I've just started having the same problem after the upgrade. I hope someone fixes this as it's a real nuisance. I've turned auto space off. You get so used to typing in a particular way then discover thatihavejustwrittenasentencewithnospaces.
Click to expand...
Click to collapse
Rajesh3009 said:
I just got an update of around 60 MB size and the double spacing issue no longer exists. Thanks to Samsung!
Click to expand...
Click to collapse
what build number?
Just downloaded the update 3 days ago, which introduced the issue on my Note 2 device. What is amazing, here we are several months since the pronlem has been reported to Samsung, and the issue still exists. Anyway to backout the last update?