Develop Bugs

Messaging Accounts deleted after Soft Reset

Hi guys!
I'm using a Trinity (WM6; Build 17944.0.3.1), everythings is great - except whenever I do a soft reset my messaging accounts are no longer there (Yahoo, Gmail, etc.) default accounts such as Text & MMS are intact but I always end up setting up my Yahoo & Gmail account whenever I do a soft reset.
Any tips?

locate a file called "startclean" in /windows/startup, and delete it, that could be the reason.

taiseer999 said:
locate a file called "startclean" in /windows/startup, and delete it, that could be the reason.
Click to expand...
Click to collapse
Excellent tip. I'll try it out and report if it works.

taiseer999 said:
locate a file called "startclean" in /windows/startup, and delete it, that could be the reason.
Click to expand...
Click to collapse
I opened my startup folder and there is no reference to "startclean."
I have the following: btdwake, poutlook & VCDaemon. I already did a hard reset & after setting up a new message account (Yahoo & Gmail) after resetting these accounts vanish.
Help!

mcnl6754 said:
Hi guys!
I'm using a Trinity (WM6; Build 17944.0.3.1), everythings is great - except whenever I do a soft reset my messaging accounts are no longer there (Yahoo, Gmail, etc.) default accounts such as Text & MMS are intact but I always end up setting up my Yahoo & Gmail account whenever I do a soft reset.
Any tips?
Click to expand...
Click to collapse
you can use this to restore them accounts, works great.
I've noticed the same thing happening on my P3600 after installing certain programs (too bad I dont remember which ones) but only on certain ROM's

mndgz said:
you can use this to restore them accounts, works great.
I've noticed the same thing happening on my P3600 after installing certain programs (too bad I dont remember which ones) but only on certain ROM's
Click to expand...
Click to collapse
What can I use? Is there a URL or Hyperlink?

mndgz said:
you can use this to restore them accounts, works great.
I've noticed the same thing happening on my P3600 after installing certain programs (too bad I dont remember which ones) but only on certain ROM's
Click to expand...
Click to collapse
Got it. Thanks! Will send feedback once I get my device setup.
Thanks again.

Problem Solved - for me anyway
Had the same problem, was driving me crazy untill I found this:
Set up all your settings, email accounts, etc. Make sure your phone is not plugged in to your charger or sync cable, if it is, unplug the cable and wait a few moments. Turn off your phone by holding the power button for 4 seconds,
then restart.
Apparrently this writes the settings to memory so that after a soft reset they won't be lost.
I did this two days ago and the problem has not re-occurred for me.
Here's hoping.

Messaging accounts and passwords disappearing probably solved!
Hi to all!
After a few days with this terrible problem I think I've found a solution!
For me it works for 100% and I really hope that it'll help you too.
So, the theory (you can look immediately to the next chapter if you don't care about details and just want the solution):
Problem with settings (mail accounts, passwords, exchange folders) disappearing and known solution (start IE, disconnect, turn off) telling us that problem is connected with saving settings to the filesystem.
There might be 3 problems:
1. Some huge cache for system setting. Flush operation is not so often, so everything lost during a soft reset.
2. Some error in system databases support.
3. We're closing system application in some wrong way....
So, I started with simple 3rd variant and I've found out that all of us are using HTC X-button application to close running programs instead of minimize them.
Currently I have installed PDAVIET rom with X-Button 1.51 (build 30470).
The Solution:
Open registry editor and remove X-Button daemon "taskserStart.exe" - go to HKEY_LOCAL_MACHINE/Init and find value "LaunchXX" with data "taskserStart.exe" and delete it!
That's all!
Thank you!
EDIT:
To avoid misunderstanding I'll describe steps:
1. Delete registry value: "Open registry editor and remove X-Button daemon "taskserStart.exe" - go to HKEY_LOCAL_MACHINE/Init and find value "LaunchXX" with data "taskserStart.exe" and delete it!"
2. SoftReset
3. Enter passwords, restore accounts etc.
4. Completed!
Also I've found previous version of X-Button and with this version accounts and passwords don't disappear: View attachment X-Button1.5.cab

Lost Settings
Hi all,
I have problems with the same ROM's, I found this thread and go test this.
I lost BT, WiFi, IE and Mail setting

efrost said:
Hi to all!
After a few days with this terrible problem I think I've found a solution!
For me it works for 100% and I really hope that it'll help you too.
So, the theory (you can look immediately to the next chapter if you don't care about details and just want the solution):
Problem with settings (mail accounts, passwords, exchange folders) disappearing and known solution (start IE, disconnect, turn off) telling us that problem is connected with saving settings to the filesystem.
There might be 3 problems:
1. Some huge cache for system setting. Flush operation is not so often, so everything lost during a soft reset.
2. Some error in system databases support.
3. We're closing system application in some wrong way....
So, I started with simple 3rd variant and I've found out that all of us are using HTC X-button application to close running programs instead of minimize them.
Currently I have installed PDAVIET rom with X-Button 1.51 (build 30470).
The Solution:
Open registry editor and remove X-Button daemon "taskserStart.exe" - go to HKEY_LOCAL_MACHINE/Init and find value "LaunchXX" with data "taskserStart.exe" and delete it!
That's all!
Thank you!
EDIT:
To avoid misunderstanding I'll describe steps:
1. Delete registry value: "Open registry editor and remove X-Button daemon "taskserStart.exe" - go to HKEY_LOCAL_MACHINE/Init and find value "LaunchXX" with data "taskserStart.exe" and delete it!"
2. SoftReset
3. Enter passwords, restore accounts etc.
4. Completed!
Also I've found previous version of X-Button and with this version accounts and passwords don't disappear: View attachment 49412
Click to expand...
Click to collapse
Does this mean, that the Installation of the linked X-Button 1.5 version
would avoid the problem??
Olioaglio

Olioaglio said:
Does this mean, that the Installation of the linked X-Button 1.5 version
would avoid the problem??
Olioaglio
Click to expand...
Click to collapse
In general, yes, but I didn't try to install older version above working newer version.
What I did is:
1. Removed registry key and then soft reset.
2. Install older version.
Thank you!

As to me X-button is not related to this issue. This is a feature of wm6 implemented with bugs by Dopod, who provided a lap with bugs.
This issue and others can affect a lot (if not every) dopod roms, It can be mitigated by disabling file system cache, but require a new lap to be solved.
Have a look here and around for further information:
https://msdn2.microsoft.com/en-us/library/aa923659.aspx
Ciao

claros said:
As to me X-button is not related to this issue. This is a feature of wm6 implemented with bugs by Dopod, who provided a lap with bugs.
This issue and others can affect a lot (if not every) dopod roms, It can be mitigated by disabling file system cache, but require a new lap to be solved.
Have a look here and around for further information:
https://msdn2.microsoft.com/en-us/library/aa923659.aspx
Ciao
Click to expand...
Click to collapse
Hi!
As I said, it might be problem with cache, but nevertheless new version of X-Button closes system applications in different way than old version (probably using KillProcess or something... I didn't study it in details) and with old one system applications have time to save their settings.
It is true that reason is not in X-Button, but using old version I don't have this problem at all.
Solution is not for fixing a bug in OS, but for avoiding the problem.
Thank you!
P.S. Thanks for the link. I'll study it.

shelby67 said:
Had the same problem, was driving me crazy untill I found this:
Set up all your settings, email accounts, etc. Make sure your phone is not plugged in to your charger or sync cable, if it is, unplug the cable and wait a few moments. Turn off your phone by holding the power button for 4 seconds,
then restart.
Apparrently this writes the settings to memory so that after a soft reset they won't be lost.
I did this two days ago and the problem has not re-occurred for me.
Here's hoping.
Click to expand...
Click to collapse
I did as instructed, and this worked exactly as stated. WOW!
My settings are retained whenever I do a soft reset. Simple, clear & more importantly IT WORKS!!
Thanks.

Not So Fast!
mcnl6754 said:
I did as instructed, and this worked exactly as stated. WOW!
My settings are retained whenever I do a soft reset. Simple, clear & more importantly IT WORKS!!
Thanks.
Click to expand...
Click to collapse
Thanks mcnl6754,
However not long after I posted, I lost my settings again. I haven't tried esofts fix yet. I was hoping for some more feedback first.
I did ring HTC (Australia) about this, they denied any fault of the ROM.
I am using the latest official ANZ rom from their website.

shelby67 said:
Thanks mcnl6754,
However not long after I posted, I lost my settings again. I haven't tried esofts fix yet. I was hoping for some more feedback first.
I did ring HTC (Australia) about this, they denied any fault of the ROM.
I am using the latest official ANZ rom from their website.
Click to expand...
Click to collapse
After trying out your suggestion - I have sucessfully retained my message settings for 3 days without a glitch so far. Have done as much as 10 soft resets just to make sure it was retained. So for me everything has worked out perfectly.
Thanks again.

Hi to all!
I have to tell that disabling X-Button was working for a week or so and then I lost my settings again.
Also I tried to disable file system cache, it was working for a few days and yesterday night I've lost my settings once more.
100% solution doesn't exist yet.
I'll keep trying, but I feel like it would be easier to create small application which will configure everything (network, e-mails) and put it into autostart. :-\ I'll work on this issue next weekend.

Problem Solved
I've install Mary ROM and problem solved!
http://forum.xda-developers.com/showthread.php?t=327967

some body have tried to disable the system cache???

Internet now working on Sprint Touch w/new ROM

I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy

anyone else know if this works?
i just flashed the new sprint rom and now the data connection does not work.. no internet.. ? I was just wondering if anyone else had this problem and does this fix it?

After some more time with this ROM installed I have found that it is not neccessary to change the ##DATA# (##3282#) user name settings. Just change the HKEY_LOCAL_MACHINE/Software/OEM/DIM/EnableCurrentUserName value to zero, save changes and then you can run the IOTA update successfully (or at least I can).
I have found that I need to do this every time I do a hard reset of my device. I hope this helps someone else.
Scruffy

this did not work for me.. I Get error code 67
i started a new thread here........ http://forum.xda-developers.com/showthread.php?t=415666
so maybe someone will chime in... the ##3282# does not work for me at all.. you hit that on the dial pad and nothing happens... so i can not access that menu...
For now i went back to a OEM rom and called sprint and they got me working by doing a MASTER RESET... also ##3282# works on OEM roms but i think the file EPST.EXE is missing from the CUSTOM roms... any input would be great..

Not working for me.
i'm sure a master reset from within #778 or whatever would work but i don't feel like
putting in the data again.

Scruffy said:
I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy
Click to expand...
Click to collapse
how do i find [email protected] where would that be?

Scruffy said:
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Click to expand...
Click to collapse
I just upgraded to NFSFAN's latest ROM, everything went well but I can not get my internet to work. The one thing I did notice is under the services tab, internet is not an option. I loaded the dcd sprint carrier 20090714 cab am I missing something else?
Thank you for any help you can provide.

Update:
Well I went back and flashed to the HTC 6.1 rom, then back to the 6.5 rom. That fixed my internet issues, but that option is still missing for me. Then after all of that my MSID was really screwed up. Everything seems to be good now.

please please help me clear the instructions
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall

electricfeel_2012 said:
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall
Click to expand...
Click to collapse
The path of HKEY.... is actually on the registry. You need to use a registry editor (like PHM Regedit) to make the necessary changes to the registry. I would recommend you to re-read those instructions as they will not get any easier than that. Alternatively, if you are on Sprint's official rom and have absolutely no clue what you are doing, you can always call them and ask them for help.
As far as the IOTA zip file, if you cannot open it, that means that you do not have any program to extract from compressed files in your device. Your best bet is to transfer the file to the desktop and extract it there. Once you are done, place the extracted contents back in the device and run it in there.

[REF] HowTo stop ActiveSync running all the time.

Hi everyone, I am constantly seeing allot of questions and duplicate posts all over the forums regarding for this ActiveSync issue, i.e. it is running in the background even after a disconnection from your PC or mail client etc. so I have created this thread to try to help clogging up some of the already big threads. Hopefully this will leave allot of valuable space left on the individual ROM's threads created by the cooks, so as to report non Microsoft related problems..
Full instructions and files here, hope this helps everyone at XDA.
http://forum.xda-developers.com/showpost.php?p=2481033&postcount=81

why wouldnt you just use this...?

Blazeitup123 said:
why wouldnt you just use this...?
Click to expand...
Click to collapse
It's indeed much comfortable and works excellent.

eLiAs_ASyncKiller.cab
Blazeitup123 said:
why wouldnt you just use this...?
Click to expand...
Click to collapse
Hi Blazeitup123.
The eLiAs_ASyncKiller.cab works fine but does not close activesync all the time, i.e every time I check my internet e-mail via gprs activesync stays open even with the eLiAs_ASyncKiller cab installed, and i have to close it manually.
The TaskManager route closes activesync all the time.

gadjet said:
Hi everyone, I am constantly seeing allot of questions and duplicate posts all over the forums regarding for this ActiveSync issue, i.e. it is running in the background even after a disconnection from your PC or mail client etc. so I have created this thread to try to help clogging up some of the already big threads. Hopefully this will leave allot of valuable space left on the individual ROM's threads created by the cooks, so as to report non Microsoft related problems..
Full instructions and files here, hope this helps everyone at XDA.
http://forum.xda-developers.com/showpost.php?p=2481033&postcount=81
Click to expand...
Click to collapse
thanks!i have just followed your instruction and for now it seems to work

Cheers..
sciuritiddu said:
thanks!i have just followed your instruction and for now it seems to work
Click to expand...
Click to collapse
Hi sciuritiddu.
Glad to help, it all come via XDA anyway.

You can undo action.
Hi everyone.
Just a quick note to say you can undo this action if you select wrong replilog...
Any problems doing this and I wll post screen shots on how to undo.

any other way?
is there any other way for making the activesync stop running everytime without using any additional software?

Stopping ActiveSync from running all the time!
amirfsl said:
is there any other way for making the activesync stop running everytime without using any additional software?
Click to expand...
Click to collapse
Here goes:
1) Open Active Sync
2) Click on "Menu" and select "Configure Server..."
3) Enter false info in the server address / user name / other details
4) Click on "Menu" and select "Schedule..."
5) In BOTH drop-down menus select "Manually"
6) Click on "ok" and then close Active Sync.
7) Make sure Active Sync is closed and see if it comes back to life.
Active Sync shouldn't re-open any more, since you've just configured it NOT to connect to the internet automatically / periodically any longer.
After you verify that Active Sync didn't re-open itself - you may then go back and delete the "false" server you entered before. You may do so by:
1) Click on Menu and select "Oprions..."
2) Hilight "Microsoft Exchange" and click on "Delete"
3) Click "Yes" to confirm deleting this server
That's it...
Eliav

epriel said:
Here goes:
1) Open Active Sync
2) Click on "Menu" and select "Configure Server..."
3) Enter false info in the server address / user name / other details
4) Click on "Menu" and select "Schedule..."
5) In BOTH drop-down menus select "Manually"
6) Click on "ok" and then close Active Sync.
7) Make sure Active Sync is closed and see if it comes back to life.
Active Sync shouldn't re-open any more, since you've just configured it NOT to connect to the internet automatically / periodically any longer.
After you verify that Active Sync didn't re-open itself - you may then go back and delete the "false" server you entered before. You may do so by:
1) Click on Menu and select "Oprions..."
2) Hilight "Microsoft Exchange" and click on "Delete"
3) Click "Yes" to confirm deleting this server
That's it...
Eliav
Click to expand...
Click to collapse
awsome!!
worked like a charm

incident said:
awsome!!
worked like a charm
Click to expand...
Click to collapse
Glad I could help!

this seems to be some kind of registry setting.
if we could find the setting, it would be much easier to disable activesync when it is unwanted

Just do a full dump before and after all steps necessary. Then you can easily find out what changed by comparison.

doesnt work with Dutty's V1.9.
tried elias & the followed the taskmanager steps, did a soft reset with no luck!

gtpete said:
doesnt work with Dutty's V1.9.
tried elias & the followed the taskmanager steps, did a soft reset with no luck!
Click to expand...
Click to collapse
Did yoy do as told in the first post? the Task Manager trick works for me every time with every rom!

the most simple and elegant solution:
just add activesync to exclusive list in the task manager...
1. when you'll check and get activesync on (uninvited)
2. go to task manager.
3. Click and hold on the word Activesync and then select from the pop-up "add to exclusive".
4. go to exclusive tab and thick activesync (repllog.exe).
done. worked for me many times (many ROMs)

gtpete said:
doesnt work with Dutty's V1.9.
tried elias & the followed the taskmanager steps, did a soft reset with no luck!
Click to expand...
Click to collapse
It was one and the same thing with me with Swtos WM6.1 WWE CE OS 20748, Build 20748 V1.2 Full, UC Ready ROM. I couldn't manage to kill the ActiveSync. I tried all your advices but nothing.
I think it's come with Bild 20748 ROMs.
The previous Bilds are without any problem.
Many thanks

KukurikU said:
the most simple and elegant solution:
just add activesync to exclusive list in the task manager...
1. when you'll check and get activesync on (uninvited)
2. go to task manager.
3. Click and hold on the word Activesync and then select from the pop-up "add to exclusive".
4. go to exclusive tab and thick activesync (repllog.exe).
done. worked for me many times (many ROMs)
Click to expand...
Click to collapse
I-d like to try this final advice: What kind of Task Manager you use?
Thanks in advance.

Qukace said:
I-d like to try this final advice: What kind of Task Manager you use?
Thanks in advance.
Click to expand...
Click to collapse
the htc task manager i am sure you have it also....

ppl can try this...
swtos said:
Use Sktools - Notifications Queue -- Find replLog.exe that starts at time changes and disable.
Or use Programs --> accessories --> TaskManager and remove the appropriate notifications.
Click to expand...
Click to collapse

Text Message Sent Confirmation - How to disable?

Everytime I send a text message, it pops up a message letting you know that it was sent. It is extremely annoying. Is there anyway to turn it off? I went into the options and unchecked the boxes, but that didn't work.

BehindTheLight said:
Everytime I send a text message, it pops up a message letting you know that it was sent. It is extremely annoying. Is there anyway to turn it off? I went into the options and unchecked the boxes, but that didn't work.
Click to expand...
Click to collapse
Got under my skin too! Download CeRegEditor to your pc and sync your phone via WMDC run the CeRegEditor make connection within the program and go to tools and then unlock registry, then follow these keys HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings\ change key value SMSNoSentMSG to a value of 1. Save the edit and perform soft reset. Tada no more annoyance!!! If you dont like the thought of thumbing through your registry then you can find .cab file that will preform it for you. And also you can download other programs that for the life of me I cant think of right now and install them to change this and other settings on your phone. Just do a search and youll find them. Hope this helps!

ajolliff said:
Got under my skin too! Download CeRegEditor to your pc and sync your phone via WMDC run the CeRegEditor make connection within the program and go to tools and then unlock registry, then follow these keys HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings\ change key value SMSNoSentMSG to a value of 1. Save the edit and perform soft reset. Tada no more annoyance!!! If you dont like the thought of thumbing through your registry then you can find .cab file that will preform it for you. And also you can download other programs that for the life of me I cant think of right now and install them to change this and other settings on your phone. Just do a search and youll find them. Hope this helps!
Click to expand...
Click to collapse
Thanks for the reply. That sucks that you have to do all that to get rid of this annoyance. What were they thinking when they put this message confirmation in? Wow, what a mistake.

I am pretty sure that I used HD tweak to turn it off. 2.1 - Sent notification- disabled.
Very useful app as is Schapps Advanced Config tool. Both should be on your phone.

I use "Rhodium Settings Tool" by Tom_Condom. http://forum.xda-developers.com/showthread.php?t=549135 once installed go to menu>text massaging>notifications SMS sent

HSUPA cab wont instal!

I had the speed fix instaled but i did a factory reset to to clear up space and just instaled the thing I really use and now i cant unlock the HSUPA feature in advance network any sugestions

hmmm...well id say uninstall the cab. soft reset to make sure its cleared out. then if i remember correct, install the data fix cab again. dont restart right then when it asks. cancel it. then go to start menu. settings. advanced connections. then make sure to select the one that says HSPDA/HSUPA enabled. meaning both are enabled. after u do that, then soft reset it. once your phone boots back up, you should see the big H symbol next to your 3g one or whatever one you have. It worked like a charm for me. no problems. the H stays enabled on mines. Just make sure to do it exactly like that or its not probaly registering right or something or saving the changes. hope this helps you. let us know. i have the data fix, sd card tune up, no push internet, and dynamic proxy cabs installed. along with all bloatware deleted from phone. So my phone is wayyyyyy faster and smoother than b4. also added a ton more free ram available on startup, idle, and normal/heavy use. i also got drivers but going off subject..lol good luck

What is the latest version i've dowloaded jh2001's tilt2 data speed fix 1.0
when I open to install it says it is unsuccesfull

hmm..i just checked..i have the same version as you, the 1.0. you just have to make sure to install it in those steps i listed in previous post. Unless u have some custom rom or something and its not registering right. ok quick version. make sure its uninstalled. we starting over..lol Then install it directly to your device memory if the option comes up to do so. Then itll probaly say that u need to soft reset for changes to take effect. press cancel. you dont want to soft reset yet. then go to start menu, then settings, then advanced. You should see that it changed up from b4. You need to select the one that has both hspda/hsupa. make sure its selected. then go back out to main or home screen and soft reset. once your phone boots back up, you should see the H SYMBOl up top of your phone. you can also go to to your settings again . and go to advanced and make sure that it says hspda/hsupa. dont change anything else in there unless you know what you doing. might change something up. it should work wit no probs though. let me know if that still didnt work. theres nothing wrong with the cab. or just download it again, meaning a new one, and do those steps listed. enjoy your weekend.

Well Ive tried uninstalling previous installation but it doesn't show on the programs list and Ive followed the instructions given above but I still getting error installing the ceab I had it installed before and it worked!!
How do I erase the phone to factory settings other than cleaning storage?

quiquerc said:
Well Ive tried uninstalling previous installation but it doesn't show on the programs list and Ive followed the instructions given above but I still getting error installing the ceab I had it installed before and it worked!!
How do I erase the phone to factory settings other than cleaning storage?
Click to expand...
Click to collapse
Clearing Storage will reset your phone to the factory (default) settings of your current ROM. Is an error message appearing when you try to install or is nothing happening?

I did went and clean the storage but When I try to install the cab it instantly says
"Installation of jh2001 tilt2 data speed kix 1.0 cab was`unsuccessful"
i really don't understand as i mentioned before it was working fine two week ago

Well just did a hard reset an erase the storage but still can't reinstall the speed fix!
Is there any other way or another cab to install?
Anybody reporting the same problem?

ok, you don't need the speed fix for HSPDA/HSUPA support. Download and install Julian Schapps advanced configuration program, you will also need to download and install .net ver 3.5 (get it from microsoft). Install and soft reset. Start adv config, scroll down to data connections and enable HSUPA support, soft reset. Then open settings, advanced network settings and then scroll to enable hspda/hsupa and you are all set. you will be getting around 2.2-2.8 MB/sec download speeds. This works well and you will see the H on your top line of the home screen. You do not need the speed fix, you can install it, but after these first two steps.

quiquerc said:
Well just did a hard reset an erase the storage but still can't reinstall the speed fix!
Is there any other way or another cab to install?
Anybody reporting the same problem?
Click to expand...
Click to collapse
ms0529 said:
ok, you don't need the speed fix for HSPDA/HSUPA support. Download and install Julian Schapps advanced configuration program, you will also need to download and install .net ver 3.5 (get it from microsoft). Install and soft reset. Start adv config, scroll down to data connections and enable HSUPA support, soft reset. Then open settings, advanced network settings and then scroll to enable hspda/hsupa and you are all set. you will be getting around 2.2-2.8 MB/sec download speeds. This works well and you will see the H on your top line of the home screen. You do not need the speed fix, you can install it, but after these first two steps.
Click to expand...
Click to collapse
quiquerc, you can do what ms0529 just suggested, it should get you the HSUPA options and the related speed improvement by following those steps. However, each time you clear your memory like that (aka "hard reset"), you also wipe out some critical elements that have to be added to any new fresh ROM, like .net 3.5...so, you'll have to reinstall that anytime you wipe the phone, before many programs (like this cab) will install or work properly.
So, install .net 3.5 again real quick (see below), and you should be able to install and use the cab after that...however I DO highly recommend the advanced config app anyway, so you should try that out even if you don't use it to help you out with this (in fact, I've even attached the cab here for you as well )

Ive install net 3.5 directly from microsoft and the advance configuration tool
and was able to enable hspda But when I go to the advance network connection it doesn't gives me the option to enable it like the speed fix did.
I'm going to redo all the instructions above maybe I'm missing something.

Ive instaled the config tool and its worling fine now.
Im instaling android let's see what happens!!

hsdpa
I need the help. But there is no such option under "advanced network" on the htc tilt 2(Enable/Disabled hsdpa option).What programs recomended for me