Is there any way for the SMS counter to go back to 0 when viewing several messages from one sender? Other wise I have to keep going back and opening for the counter to tick down.
On my 6800 I upgraded to the last DCD rom and it did the same. Only for that reason did I go back to his previous rom. This drives me nuts. The worst part is I recieved 15 angry texts from my ex wife. Who the heck wants to open that up 15 times for it to clear?
just go to the threaded messages & use the arrow keys to go select each & every one of them & it'll set the counter right. hope that makes sense.
I found a better fix. This adds "Mark all messages read"
http://forum.xda-developers.com/showthread.php?t=379265
Is there still not a cab/real fix for this? I know that it is a problem with the version of WM that it shipped with but this is kind of ridiculous and Sprint/Whoever can't expect us to deal with this or install a cab that "makes it easier"
All other version of WM that i've ever used have never had this problem before and it is quite annoying if you stay in a text message for a while and then go out and have to click through 100 messages... Yes I've already installed the cab that adds "Mark all as read" but its still annoying.
Cheers
View attachment htmlnote.zip
Download install that DLL into your windows and your all set. This is a well known issue with the DLL not letting go of the message properly. Fix thanks to Yay4juggs
rjmjr69 said:
View attachment 227942
Download install that DLL into your windows and your all set. This is a well known issue with the DLL not letting go of the message properly. Fix thanks to Yay4juggs
Click to expand...
Click to collapse
Downloaded and copied over to /Windows folder.
Works great!
Thanks a bunch for linking the file and thank you to Yay4juggs for fixing this.
One less thing about the TP2 that is annoying... Damn you stock sprint manilla icons and inability to use the FM radio yet!
Cheers
htmlnote.dll
My TP2 says it cannot copy over the file.
rjmjr69 said:
View attachment 227942
Download install that DLL into your windows and your all set. This is a well known issue with the DLL not letting go of the message properly. Fix thanks to Yay4juggs
Click to expand...
Click to collapse
thanks for the link...I never know of this issue until I got my tp2. I had 6 & 6.1 on my wing & never encountered the problem. 2 late to really test out iwth my friends.
otterit said:
My TP2 says it cannot copy over the file.
Click to expand...
Click to collapse
try using total commander to copy over.
For those that backup on a regular using sprite etc u have to add "htmlnote.dll" & "HTMLNOTE.DLL" to the exclude list other wise the backup will fail.
pimppoet said:
For those that backup on a regular using sprite etc u have to add "htmlnote.dll" & "HTMLNOTE.DLL" to the exclude list other wise the backup will fail.
Click to expand...
Click to collapse
I'm using Sprite Backup 6.5 and it works just fine without adding it to the exclusion list.
can someone please tell me what i need and what to do to install this!
I have this problem almost everytime I get a text. Its sooooo annoying!!
come on, all I need to do is install it. I copy it over to my tp2 and it doesn't show up. I installed total commander like someone said but all that did was let me see it. It has an error when I click on it.
You need to move the file and replace the old one, not try to open it. Try deleting the old one and then moving the new one in its place.
Delete the old what? And move it where? And once it's moved do I have to install something or does it just fix it by being there?
I'm not trying to be a jerk but if you read all the posts in this forum topic you would know what to do. I'll write out instructions for you however.
1. First, download this DLL
HTML NOTE DLL
2. Extract the file onto your desktop and then transfer it over to your phone via activesync, SD card, bluetooth, etc.
3. Wherever the file was copied to (be in in the root folder of the storage card or any other place, fire up Total Commander/Resco File Explorer and copy/move the "htmlnote.dll" over to /Windows folder. which is in the root folder of 'My Device'
*You will know that you are copying/moving it to the right location if you get a message stating that you would be overwriting the current file. If you do NOT get this message than you are either putting the modified "htmlnote.dll" in the wrong spot or your already deleted it from /Windows.
If you are still having further issues, please PM me and we will work this out.
Cheers
thank you, when I moved it over I didn't get a overwrite message but eversince I put that file in there I haven't had the problem. Slowly my phone is becoming more useable and less annoying
Thank you for the information, I have found this particular bug to be exceedingly annoying. I followed all the given instructions, but when i try to copy/move the file from my storage card, and get prompted to overwrite the existing file, Total Commander returns an error 'Cannot copy or move file!'
I had already tried this a few times, without any issue, and then soft reset my Sprint TP2. Since i still had the single unread sms bubble, i tried it again and got the error above.
Any ideas? Thanks in advance...
UPDATE:
I renamed the original to '000original' and was able to copy over the new .dll. However, after a soft reset, the problem still exists.
OK, found this thread and installed the cab. Worked like a charm...
Looks like i can't post links yet, so just search for FixUnreadCount.zip and that does the trick.
FINALLY
Thanks you for finding this .. ive spent the last week searching through files on my tp2 trying to find the right one .
Related
I have dash s620 with 2gb mini sd card and v23 from ricky, the other day i was using internet explorer and went to website, all ok but in short time the phone tell me that cant open site because dont have memory for that, when i tried use free memory program the phone had only 1 mb and only release a little, there are some way for fix that or to use memory card for tmp internet file??
thanks
Um... I can check it out and see what I can do about it and I will get back to you asap.
There is a cab called Mailstorage that will save internet temp,history,and cookies and save emails to storage card. I found it on txcaesar.net in the downloads section.
Oh yah that would work...
Thanks for yours helps, i will check
has anyone actually tried the mailstorage app with 6.1?
etifft said:
has anyone actually tried the mailstorage app with 6.1?
Click to expand...
Click to collapse
Na what is this application anyways, give it a try and see if it works. Did you have some specific questions on it or what?
I downloaded the app, but it errors during the install. I was just wondering if anyone else had this app working before I spend time trying to resolve the issue.
etifft said:
I downloaded the app, but it errors during the install. I was just wondering if anyone else had this app working before I spend time trying to resolve the issue.
Click to expand...
Click to collapse
What errors are you getting when installing it.
I just tried it again, and it said it installed successfully, but was made for a previous version of windows.
Now I'm not sure what it did with the install. can't find the installed app, or a way to configure it.
Ummm would it be under java program. Or just browse under accessories possibly.
I don't see the app anywhere, but after rebooting, I notice my IE setting are pointing cookies, etc... to the storage card. Something's working. Not sure how to check for e-mails going to the storage card?
There is a Pocket IE folder on my storage card with the above referenced folders
etifft said:
has anyone actually tried the mailstorage app with 6.1?
Click to expand...
Click to collapse
I cant take it because need register in these site.
It's says made for previous version when you install, but works good on my 6.1 blackjack. It moves pie to storage and downloaded email/attachments to storage. It's not necessary to run a mailstorage program because the cab takes care of the changes.
no need for all that in 6.1. go into Settings/IE Settings/Temporary File Path and change the IE Cache Path
Hello all, I have an Dash with a broken screen so I can't see anything. Is there a way I can do a hard reset via computer or maybe some sequence of keys on the handset. I really need to get my contacts & data off of the phone before I return it. Thanks in advance for any help
lil1 said:
Hello all, I have an Dash with a broken screen so I can't see anything. Is there a way I can do a hard reset via computer or maybe some sequence of keys on the handset. I really need to get my contacts & data off of the phone before I return it. Thanks in advance for any help
Click to expand...
Click to collapse
This is how to Hard-Reset on phone http://farm4.static.flickr.com/3115/2541775762_85aa3db274_o.jpg
You could check this worked by conecting via async and checking folders, you will tell because all will be removed, old programs etc.
Thanks that's good info. But the only thing is I can't see the screen to follow the on screen prompts. The screen shows nothing but what looks to be black & white ink
lil1 said:
Thanks that's good info. But the only thing is I can't see the screen to follow the on screen prompts. The screen shows nothing but what looks to be black & white ink
Click to expand...
Click to collapse
Follow it to a t and even without the screen you should be able to do it?
I am guessin you can still hook up to computer?
Could do with some help here from other users, could lil just delete the .pim via async and it would delete contacts?
Where are messages stored? So they can be deleted....
Re Deleting all info
Hook up via async and delete these cemail.vol will delete the the mms and sms
Contacts, Calendar are all stored in a database file called PIM.VOL that in the root directory.
Help provided by gixxum
stylez said:
Hook up via async and delete these cemail.vol will delete the the mms and sms
Contacts, Calendar are all stored in a database file called PIM.VOL that in the root directory.
Help provided by gixxum
Click to expand...
Click to collapse
Ok now where would I find these files once I hook up to pc via async?
well its not going to work..here is the issues. the CEMAIL.vol file is in use basically whenever the phone is on. so you cant just copy or delete it or you get an error and it fails. i have been looking around a bit and havent found an excalibur specific solution this this. give me a few minutes to play around
and you will see the files in the root directory..root directory is where you will see program files, storage card, windows etc.. when you connect via activesync and browse to it with explorer..scroll down and you will see the files.
make sure you have your pc set to show hidden and system files your you wont see some things..
Ok I'll wait on the response & b sure to have pc show hidden files. I also want to thank U guys 4 ur help thus far
gixxum said:
well its not going to work..here is the issues. the CEMAIL.vol file is in use basically whenever the phone is on. so you cant just copy or delete it or you get an error and it fails. i have been looking around a bit and havent found an excalibur specific solution this this. give me a few minutes to play around
and you will see the files in the root directory..root directory is where you will see program files, storage card, windows etc.. when you connect via activesync and browse to it with explorer..scroll down and you will see the files.
make sure you have your pc set to show hidden and system files your you wont see some things..
Click to expand...
Click to collapse
You know how the phone async explorer integrates with explorer on comp does this not mean you could use an unlocker and unlock the file in question then delete? Long shot.
I have an unlocker to which i could attach if any use?
lil1 said:
Ok I'll wait on the response & b sure to have pc show hidden files. I also want to thank U guys 4 ur help thus far
Click to expand...
Click to collapse
do you have aol, yahoo,or msn chat? be easier to try a few things over a chat than on the forum...
stylez said:
You know how the phone async explorer integrates with explorer on comp does this not mean you could use an unlocker and unlock the file in question then delete? Long shot.
I have an unlocker to which i could attach if any use?
Click to expand...
Click to collapse
its a sharing violation because that files is in use.
here is the problem. if we can go into the registry and change the path for the mms/sms and reboot...it will create a blank .vol file in the new path that was created in the registry ...therefore freeing the one that we need to delete.
or so thats my theory...let me install pim back up and back my stuff up...i have some texts i need so i cant just go deleting just yet.
yes i have yahoo IM ([email protected])
What IM do U have?
Thanks guys 4 all of your help. I finally got it to reset holding the 2 soft keys & the send key. Thanx again
lil1 said:
Thanks guys 4 all of your help. I finally got it to reset holding the 2 soft keys & the send key. Thanx again
Click to expand...
Click to collapse
Cool glad you got it sorted, knew you would be able to reset blind
Was there any fix for the cemail, though? I saved my cemail.vol before a hard reset, and would like to restore it now, but i always get a sharing violation error.
endolith said:
Was there any fix for the cemail, though? I saved my cemail.vol before a hard reset, and would like to restore it now, but i always get a sharing violation error.
Click to expand...
Click to collapse
Remove "messaging" from the Today screen so that the file is not in use, and restart. It should now be deletable.
Hi, Hope you can help, I upgraded the ROM on my dash and it kept freezing and would not connect to active sync. I reset it as it said here but it is still the same it appearts to be frozen and none of the keys work, not even the power button.
Any ideas please?
Hi,
I'm experiencing problems with PocketIE.
Simply it doesn't not load pages: as soon as I tap Go or I give Enter, it says "Connecting..." in the bottom bar, then 0 KB, then nothing again, and does not load anything!
It simply stays idle on the default home page!
Every other application is able to use my internet connection.
Any suggestions
Ciao, ErMeglio
Looks like you have a connection issue: problem is not PocketIE, but your PDA don't connect to internet.
Just to be sure, try istalling other browsers: OperaMini, etc. I bet, other browsers will not connect, too.
Try to check internet connection
ErMeglio said:
Hi,
I'm experiencing problems with PocketIE.
Simply it doesn't not load pages: as soon as I tap Go or I give Enter, it says "Connecting..." in the bottom bar, then 0 KB, then nothing again, and does not load anything!
It simply stays idle on the default home page!
Every other application is able to use my internet connection.
Any suggestions
Click to expand...
Click to collapse
what your rom version?
ErMeglio said:
Hi,
I'm experiencing problems with PocketIE.
Simply it doesn't not load pages: as soon as I tap Go or I give Enter, it says "Connecting..." in the bottom bar, then 0 KB, then nothing again, and does not load anything!
It simply stays idle on the default home page!
Every other application is able to use my internet connection.
Any suggestions
Click to expand...
Click to collapse
This happened to me when i imported my config XML using advanced config.. the only way to fix it is to hard reset i think.
I discovered this because I wanted to install signed OperaMini in my own language as I always did: downloading from IE by Mobile. That's the only way to get it signed, since suggestions I found on other threads didn't work(MANIFEST modify).
The fact is this situation is after an HR and Internet works perfectly: WLM is listening "as items arrive" and so my Exchange email set in Active Sync.
BUT, this is also after me messing with SDConfig.txt...I've set all my usual apps and some xml and this:
veyka said:
This happened to me when i imported my config XML using advanced config.. the only way to fix it is to hard reset i think.
Click to expand...
Click to collapse
actually makes sense.Infact one of the XML I make SDConfig.txt import is the one exported from AdvanedConfig, just after my personalizations. I don't remember if I did import it again by the app another time after HR, but I don't think so. Did you try importing it differently(SDConfig, other apps)? I'd like to understand if it's the xml itself, or the importing from the AdvConf app.
I've just noticed that the index file of IE cache (on sd according to my xml) is somehow "locked": I can't delete it. It could be IE can't write there too.
I'm doing a complete loong scan disk of my Micro by Windows Vista (even if I never had a problem, it always complains about corruption, so let's try and see what Mr. Bill can do )...then I'll delete cache from pc and try again...
I've much to learn to get my SDConfig work in all its parts
@abusalza
Yes, I'm using PDACornerPro.V22 but posted separately because this issue was not there at first, so it's -99%- sure it isn't your rom's fault, thanks for interesting
As soon as I get everything working through SDConfig, I'll go for final v23, I see you're uploading
[UPDATE]
Ok, just did the scandisk and it found 450MB of damaged files! I really don't know where and how, but I deleted the so-big FOUND.000 directory it made and didn't really understand where all that stuff came from.I deleted any file into IE's cache dirs too but no luck with IE, same matter.
Will flash V23, make SDAutoRun do its duties and see...
If it's confirmed to be an AdvConf matter, why don't we discuss it with Schap?
Well, just to let you or someone who comes here later know how this story finished, I found which was the matter!
With AdvancedConfig I changed the Application Data directory and moved it to storage card.
Seems IE didn't like that tweak: I simply changed it to \Application Data again and woilà, IE started working
Thanks for pointing me to the solution
Ihave Same Problem But When I Using Rom Wm5 With Original Cingular Ie Work Fine But When I Upgrade To Wm6 Or At&t, That Happen Again, I Try Install Opera It's Work Fine
Is there a way to get MSN Messenger onto my phone for free or is it a purchase only? I found an old version of Messenger for pocket pc 2002 ( it was via a thread at this board ) which after installation on my phone showed the MSN icon but didn't do anything. There was some update file which I needed as well to make it work but microsoft had deleted it. I'm just looking for messenger the same as it is on my pc, with standard smileys, etc, not one of those messenger clones. Thanks.
How's this? http://www.badongo.com/file/2528811
JamminJaguar said:
How's this? http://www.badongo.com/file/2528811
Click to expand...
Click to collapse
Thanks man. Unfortunately, after it goes through the process of trying to install the .CAB file on my phone, it says installation unsuccessful. Not sure why tbh. On their error screen, they say it could be insufficient memory, device may not support it, or that my carrier (T-Mobile) may not allow it. As it installs, it doesn't give me an option to install to either the device or my storage card. Any suggestions?
Try this thread: http://forum.xda-developers.com/showthread.php?t=334621
JamminJaguar said:
Try this thread: http://forum.xda-developers.com/showthread.php?t=334621
Click to expand...
Click to collapse
Excellent, I got it working! I tried out duttythroy's 1.80mb cab file and it worked. Well actually, it said successful install but there was nothing to find of the program anywhere on my device except in remove programs. So I decided to look in my device/windows folder, and all the WLM files were in there. I clicked on the WLMMessenger.exe and it went through the set up process, merging contacts and signing me in. Thank you JamminJaguar and duttythroy.
No problem, now buy my Nike.
JamminJaguar said:
No problem, now buy my Nike.
Click to expand...
Click to collapse
Heh
Actually, I ended up installing this, uninstalling it and reinstalling it, because I did something wrong with the setup. On the first install, messenger, windows live services and and search bar all showed up on my phones desktop which was great. This time, it's not showing at all for some reason. Maybe because on the second install I decided to untick the search bar and services? So I've copied the WLMMessenger.exe from the windows folder and pasted it into my device/program files folder and that works.
ANd agoin
im not and idiot or a noob, im tyring to post legitimate feedback on an android rom i am currently using but i need 10 posts so here is one more, thanks for this stupid rule! 8
I have been using Droid ROMS, MODS and kernels since the G1.
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Bladesharp said:
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Click to expand...
Click to collapse
You can use a program called Sprite Backup, although its not free. That will backup a lot of things, but to be honest, its probably best to start from scratch as it backs up all registry changes too, which could be the problem for you.
My bluetooth works fine, what part are you having trouble with?
Bluetooth Issues
I am having the same problem.
I have narrowed it down to tomtom installation (no bluetooth issues until tomtom is installed)
I have tried with TT7 910 9185 as well as TT7 445 and after the reboot the same error occurs.
I have also tried installing it on the memory card, and hard resetting it, however, the TomTom doesn't appear to talk to any Satellites.
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
rb14 said:
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
Click to expand...
Click to collapse
I'm on 7.915 for TomTom and don't have the issue.
Links to Facebook won't transfer with Active Sync, they are stored somewhere seperately on the phone and are not part of the Contacts program in pOutlook.exe, they are part of Manila which is not transferable. Not sure where it is stored, have been looking now for about 2 months
I came across something similar to this last week after installing TomTom from a CAB, and found this post on a related issue...
http://www.noeman.org/gsm/trash-section/65951-tomtom-7-bluetooth-problems-sorted.html
I deleted the two bluetooth files (BtSdKCE30.dll & BtCoreIF.dll) from the TomTom CAB as described, did a hard reset and reinstalled, and haven't had the problem since. Could be the same issue?
Could someone who has not installed TomTom please post the dates of their BtCoreIf.dll & BtSdkCE30.dll? Mine are both 04/24/08 20:10.
Does anyone know if it is possible to revert to the ROM version of these files WITHOUT doing a hard reset?
If some kind person was able to provide me with the ROM version, can I just overwrite the ones in RAM?
R
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Sounds the same as my thread
http://forum.xda-developers.com/showthread.php?t=522373
someone already tried the above files? will it correct the problem?
Thanks for the files.
I am happy to confirm that installing the two DLLs gets BTTrayCE.exe working again.
I just renamed the 04/24/08 versions to .was and use Total Commander to copy the files from my storage card to \Windows and rebooted the phone... ActiveSync wouldn't let me copy them directly from my PC as it said there was already a 05/14/09 version there and it was read-only!
As it rebooted, it complained that BtCoreIf.dll was from an unknown supplier but I just OK'd that and everything is fine. Bluetooth & TTN working.
R.
PS Didn't need to copy BTTrayCE.exe as this had not been overwritted.
Ah, thanks for letting me know. I wasn't sure if the exe was also needed, I only included it since one of the symptoms I was getting was that this wasn't a valid executable; but I guess that was just caused by the corruption of the dll's.
I don't think the DLLs are corrupted, just an earlier version.
Just like the bad old days of Windows 3.1 where installing one package would break others due the installing of different versions common DLLs. Gosh, I feel old!
R.
dicko99 said:
I don't think the DLLs are corrupted, just an earlier version.
Click to expand...
Click to collapse
Ah yes; that makes more sense! I still had a boot delay even with the files from the most recent TomTom version I could find.
Hi there,
i had the same Problem with TT. In my case I also copyed the BTTrayCE.exe. Now I dont get any error anymore but the Bluetooth can still not be started. Can somebody please upload the Original BTTrayCE.exe. Thank you
I did a reset of my Swisscom German Device. Copyed the 3 BT Files and installed the TT7 v7.910.9185 again. After restart of my Device the same BT Error. I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
zizzo
Thanks guys a lot. Rewriting those two files solve the problem. Bluetooth works now.
ianjd said:
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Click to expand...
Click to collapse
Thanking you very much kind sir. I unzipped these files directly to my storage card in USB mode and just double clicked the exe file and it fixed my bluetooth up for me. (good job as I am a technical biff when things get registry level)
EDIT sorry I thought it did but it didn't just fix it by double clicking the exe. I've hard reset now as I don't really know what I am doing
As said in the thread here:
http://forum.xda-developers.com/showthread.php?t=522373&page=4
There is no need to replace the two files.
Just delete them and soft reset. They will be replaced with the two right ones.
Bluetooth problem with TomTom resolved!
matrixis2day said:
I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
Click to expand...
Click to collapse
I had the same and here's what I just discovered and what worked:
I removed the files and expected them to be replaced upon restart. When I checked I noticed a file in the \Windows directory named BtSdKCE50.dll - I had not noticed this before. I (re)moved this, rebooted again and now Bluetooth and FM Radio (!) are working, yay!
hth,
TA2
This fixed my problem. Couldnt delete the old files but copied the replacements over the top and that sorted it. My version of Tom Tom wont work stil but it is 7.5 I think.
I've had exactly the same problem I've tried overwriting the dll's with the files provided in this thread,
Now whilst I don't get the error message, when I try and enable bluetooth, I get "cannot start bluetooth stack" error
Any ideas peeps?