I would like to install my microphone in my car, but the cable is only about 18 inches long, and I need to run it behind the dash and up the window pillar. Does anybody know where to get an extender cable for mini usb? I have googled for hours and found all kinds of usb cables, but all the minis go from a regular usb to mini, not mini male to mini female. The other option would be to find a mic cable that is about 4 feet long to begin with.
why not get a mini male to normal male and a normal female to normal male ?
mind you usb is max 5m
about
"mic cable that is about 4 feet long "
then you have to renember it would work as a pretty good antenna reciving noise and
maybe even a fm radiostation
aaah btw when you talk about mics and usb then normal usb dont carry any type of audio
so if you're talking about extUSB as in the connector type htc invented which is miniUSB plus audio then
you cant use normal usb cables
What is the connector on the MIC?
Is it not a 3.5mm headphone style adapter? Or even the 2.5mm mini size used on my mobile phones?
If so, then why not get a splitter to split the audio out of the extUSB to a 3.5mm jack, as 3.5mm extender cables are easy to come by.
what I have is a mini usb to a mic that has a 3.5 adaptor so you can add your own headphones. The cable length is about 18 inches. a 3.5 extender cable would only extend the adaptor for the headphones, not the microphone. As for going from "mini male to normal male and a normal female to normal male" I just don't see how that gets me anywhere. My cable has a male mini usb, so to extend it I need a mini female to mini male. That suggestion seems to get me a mini male to normal male, which would work on my computer, but not extend my microphone. Keep the ideas coming. Thanks
it's extusb and normal usb cables cant be used to extend anything
http://www.tracyandmatt.co.uk/blogs/index.php/2006/09/10/htc_hermes_usb_connector_pin_config
normal usb cables dont have all the lower pins only extusb have those
I have an adapter for my Hero that plugs into the USB port on the phone and has an audio port on the adapter. This lets me plug it into my car without running a second wire from the top 3.5mm port. Does the EVO have something similar?
jcorey said:
I have an adapter for my Hero that plugs into the USB port on the phone and has an audio port on the adapter. This lets me plug it into my car without running a second wire from the top 3.5mm port. Does the EVO have something similar?
Click to expand...
Click to collapse
Plug it into the EVO and see if it works... Micro USB on both right? Any associated software should run on EVO also unless it doesn't like Froyo.
the hero and the evo have different usb plugs the hero is a mini and the evo is a micro i wish they were both mini personally i like it better.
The evo doesnt support audio out from the usb port, you have to use the headphone port.
The Hero, Touch Pro 2, and perhaps some other HTC phones used a modified mini USB port called mini EXT-USB. It had a few extra pins in it for audio. Straight up mini USB didn't support audio output either. With the switch to micro-usb, they've gone with straight up micro USB. There's no audio output there.
As much as I hate Apple with all their proprietary stuff (among other issues), the dock connector does allow some useful functions that USB can't.
Though if the Bluetooth A2DP profile on the Evo didn't sound like absolute **** (aside from CM), it'd be a nice way to stick with one cable if you need to charge, and none if you don't.
Has anyone found a MHL cable that also includes a USB OTG port? Samsung reportedly changed from a 5-pin configuration to an 11-pin configuration to allow MHL with USB Host mode simultaneously. Perhaps for a future Desktop Mode?
Has anyone been able to find one of these cables?
Just wanted to update, I believe I found the type of connector that I was looking for, but it is missing HDMI and it is sold out. This essentially could give you PC type connectivity on the S3.
http://www.mobilefun.com/35462-mobile-fun-connection-kit-for-samsung-galaxy-s3.htm
I think we still have a bit of a wait. What you found is essentially a USB OTG hub with some card readers built in. I seriously doubt this will pass through the pins for HDMI to work out of the usb port. We'll see something when this phone finally launches everywhere. It's not even out in the US officially yet
EDIT: Sorry, didn't see the article in the link in the OP. Man.. I might have to get me a GS3 now. I'm quite satisfied with the reasoning for a pin change. =)
Samsung sells 11 pin MHL adapters and USB female to Micro USB male adapters on their accessories page, but I'm not sure if you could piggy back the USB input into the charging port of the MHL cable. I don't see any all in one cables on their site, and the desktop dock is just micro usb/audio. I tried.. =(
Here's what I was looking at.
Old and mostly unrelated. See edit.
I happened to buy what looks exactly like that adapter today earlier at Micro Center. Now, I do have a Galaxy Nexus, but the USB OTG works great with keyboards/usb/mice/hubs; however, I cannot get it to simultaneously work with my MHL adapter. I understand the GS3 has a different pin layout though for MHL - my phone works with my MHL adapter correctly, but I didn't think it would have any change on the USB OTG. I'll most likely be breaking these apart and start tinkering. My goal is to show people how much of a full desktop-like experience I can provide from my phone, since so many people somehow think a GNex or GS3 are inferior to tablets, just because they're smaller... lol
Good luck finding information out on some kind of MHL/USB OTG setup. I'm just trying to provide any information I can from how my situation works with MHL/OTG, since I'm currently on the quest to achieve this myself.
kynolin said:
EDIT: Sorry, didn't see the article in the link in the OP. Man.. I might have to get me a GS3 now. I'm quite satisfied with the reasoning for a pin change. =)
Samsung sells 11 pin MHL adapters and USB female to Micro USB male adapters on their accessories page, but I'm not sure if you could piggy back the USB input into the charging port of the MHL cable. I don't see any all in one cables on their site, and the desktop dock is just micro usb/audio. I tried.. =(
Here's what I was looking at.
Old and mostly unrelated. See edit.
I happened to buy what looks exactly like that adapter today earlier at Micro Center. Now, I do have a Galaxy Nexus, but the USB OTG works great with keyboards/usb/mice/hubs; however, I cannot get it to simultaneously work with my MHL adapter. I understand the GS3 has a different pin layout though for MHL - my phone works with my MHL adapter correctly, but I didn't think it would have any change on the USB OTG. I'll most likely be breaking these apart and start tinkering. My goal is to show people how much of a full desktop-like experience I can provide from my phone, since so many people somehow think a GNex or GS3 are inferior to tablets, just because they're smaller... lol
Good luck finding information out on some kind of MHL/USB OTG setup. I'm just trying to provide any information I can from how my situation works with MHL/OTG, since I'm currently on the quest to achieve this myself.
Click to expand...
Click to collapse
I'm not really sure why people think they NEED MHL and USB OTG simultaneously to get a "desktop-like experience". You can already accomplish this with just a plain MHL cable and a bluetooth keyboard and mouse as was demonstrated in the Connectivity Demo video on youtube.
Edit: Actually I just remembered about portable hard drives. If you want to hook up a mouse, keyboard AND hard drive I wonder if you can plug all three into a powered USB hub connected to a bluetooth dongle. Hmm...
I'm looking for a dock with USB OTG, charging and MHL. Maybe some day.
I believe this is already capable. Everything I say here is purely speculative, but what I see is that Samsung moved to a 11-pin connector for MHL and the standard 5-pin is no longer functioning. To call it MHL, they probably have to use the same standards for data encoding... but they simply "moved" the pins.
I put "moved" in quotes because of the way in which a standard 4 pin USB cable works (or 5 pin for our case)... you have a +5V, Ground, Data + and Data - (one data to phone, one data from phone, carrying ALL data). Since our phones still sync via 5-pin cables, this means the 5 pins are still "hot" for data like all other phones. I am presuming, that for the 11-pin connector, Samsung simply added a few more data+ and data- connectors (much like having two or three USB ports on a normal computer) but consolidated the ground/5V reference. I could be wrong, but it would make sense.
Lets call the stock 5 pin data connectors (2 wires) USB1. This is where MHL is conventionally sent through and all sycing can be completed through, 5 pin cable or 11 pin cable. If samsung added two additional USB ports to the single connector, lets say MHL is now over USB2 (wires inaccessible to 5 pin connectors). This frees up bandwidth and COM ports on USB1 and USB3 to use for accessories like a USB hard drive and keyboard/mouse. On a 5 pin connector, however, only USB1 is accessible. The Samsung 11pin to 5pin MHL adapter simply moves the data+/- from USB2 to USB1 (standard 5 pin location), so with the adapter you are syncing/exporting video over USB2 on the phone with a standard 5pin cable.
My thinking is such: If you plug in the OEM 11pin MHL adapter, it will also have access to the standard 5pin USB1 connection. Since USB2 is used for MHL, you can then plug any OTG device into the micro USB connector on the MHL adapter to make use of it. The only problem here is power (or lack thereof). By plugging in a USB hub with a discrete power source, plugging this into the MHL adapter, and plugging in the USB device of choice into the HUB, you *SHOULD* be able to get simultaneous data and HDMI. This assumes they put the standard 5 pins to the connector on the side of the MHL adapter and only wired the HDMI to the USB2 area.
Alternatively, you *SHOULD* be able to plug the micro USB cable from the MHL adapter into a computer, and simultaneously be able to sync files while outputting HDMI video. It sort of just comes down to being able to provide power to the MHL adapter on the +5V pin while using the data pins to access the phone. As soon as I have my MHL I'll figure it out, but that could be a bit. If anybody has access to a pinout from a Samsung 11 pin micro USB that would be helpful too.
Again, just dreaming here. I don't know anything about this, but if I was the engineer at Samsung I would choose this over analog outputs like Apple used for their giant connector.
kthung said:
I'm not really sure why people think they NEED MHL and USB OTG simultaneously to get a "desktop-like experience". You can already accomplish this with just a plain MHL cable and a bluetooth keyboard and mouse as was demonstrated in the Connectivity Demo video on youtube.
Edit: Actually I just remembered about portable hard drives. If you want to hook up a mouse, keyboard AND hard drive I wonder if you can plug all three into a powered USB hub connected to a bluetooth dongle. Hmm...
Click to expand...
Click to collapse
for me at least i already have several keyboards and mice ... none are bluetooth.
I'm looking for the cheapest option available.
I'm just hoping someone releases a cable with 4 plugs:
Male MHL - To Phone Obviously
Female MicroUSB: To plug in charger
Female HDMI - To Display
Female USB - To USB Device
That's all I want... should cost less than $2 to make, just sell it for $20 and I'd be happy.
v8bait said:
I believe this is already capable. Everything I say here is purely speculative, but what I see is that Samsung moved to a 11-pin connector for MHL and the standard 5-pin is no longer functioning. To call it MHL, they probably have to use the same standards for data encoding... but they simply "moved" the pins.
I put "moved" in quotes because of the way in which a standard 4 pin USB cable works (or 5 pin for our case)... you have a +5V, Ground, Data + and Data - (one data to phone, one data from phone, carrying ALL data). Since our phones still sync via 5-pin cables, this means the 5 pins are still "hot" for data like all other phones. I am presuming, that for the 11-pin connector, Samsung simply added a few more data+ and data- connectors (much like having two or three USB ports on a normal computer) but consolidated the ground/5V reference. I could be wrong, but it would make sense.
Lets call the stock 5 pin data connectors (2 wires) USB1. This is where MHL is conventionally sent through and all sycing can be completed through, 5 pin cable or 11 pin cable. If samsung added two additional USB ports to the single connector, lets say MHL is now over USB2 (wires inaccessible to 5 pin connectors). This frees up bandwidth and COM ports on USB1 and USB3 to use for accessories like a USB hard drive and keyboard/mouse. On a 5 pin connector, however, only USB1 is accessible. The Samsung 11pin to 5pin MHL adapter simply moves the data+/- from USB2 to USB1 (standard 5 pin location), so with the adapter you are syncing/exporting video over USB2 on the phone with a standard 5pin cable.
My thinking is such: If you plug in the OEM 11pin MHL adapter, it will also have access to the standard 5pin USB1 connection. Since USB2 is used for MHL, you can then plug any OTG device into the micro USB connector on the MHL adapter to make use of it. The only problem here is power (or lack thereof). By plugging in a USB hub with a discrete power source, plugging this into the MHL adapter, and plugging in the USB device of choice into the HUB, you *SHOULD* be able to get simultaneous data and HDMI. This assumes they put the standard 5 pins to the connector on the side of the MHL adapter and only wired the HDMI to the USB2 area.
Alternatively, you *SHOULD* be able to plug the micro USB cable from the MHL adapter into a computer, and simultaneously be able to sync files while outputting HDMI video. It sort of just comes down to being able to provide power to the MHL adapter on the +5V pin while using the data pins to access the phone. As soon as I have my MHL I'll figure it out, but that could be a bit. If anybody has access to a pinout from a Samsung 11 pin micro USB that would be helpful too.
Again, just dreaming here. I don't know anything about this, but if I was the engineer at Samsung I would choose this over analog outputs like Apple used for their giant connector.
Click to expand...
Click to collapse
hi v8bait, are you able to get data thru the micro usb port at the side of the 11-pin mhl adapter? i was thinking of using the motorola lapdock with my s3 thru the mhl adaptor (other then a micro hdmi male connector, the lapdock also has a micro usb male connector that apparently send out power as well as push keyboard/trackpad data upstream) - if it works, we can have an inexpensive "clambook"
Just to recap,
Will this we possible:
Official MHL adapter -> hdmi to monitor.
|
>OTG cable> Powered USB hub> USB keyboard & mouse.
In other words, the PC Experience with a keyboard and mouse.
Dont really want to spend the money to buy a Bluetooth keyboard and mouse when the USB ones can work just fine (theoretically).
romulusram said:
Just to recap,
Will this we possible:
Official MHL adapter -> hdmi to monitor.
|
>OTG cable> Powered USB hub> USB keyboard & mouse.
In other words, the PC Experience with a keyboard and mouse.
Dont really want to spend the money to buy a Bluetooth keyboard and mouse when the USB ones can work just fine (theoretically).
Click to expand...
Click to collapse
I am also very interested in this exact thing. Using USB devices (multiple ones, e.g. plugging a powered USB hub into S III and then plugging them in) but also putting out S III video to HDMI.
However the other workaround is using AllShare Cast. In fact that is the route I'll likely go, because of the other unique advantages of AllShare Cast (i.e. using it for presentations to screens, etc.)
So: has anyone plugged a powered USB hub into S III and used multiple devices? Such as a keyboard and mouse?
I also want to use this S III more as a computer. the other perfect thing I wish I could buy would be a keyboard case, like the one available for iphone, so I can prop the S III up on a kickstand and use a real mini-QWERTY physical keyboard.
macdroid01 said:
I am also very interested in this exact thing. Using USB devices (multiple ones, e.g. plugging a powered USB hub into S III and then plugging them in) but also putting out S III video to HDMI.
However the other workaround is using AllShare Cast. In fact that is the route I'll likely go, because of the other unique advantages of AllShare Cast (i.e. using it for presentations to screens, etc.)
So: has anyone plugged a powered USB hub into S III and used multiple devices? Such as a keyboard and mouse?
I also want to use this S III more as a computer. the other perfect thing I wish I could buy would be a keyboard case, like the one available for iphone, so I can prop the S III up on a kickstand and use a real mini-QWERTY physical keyboard.
Click to expand...
Click to collapse
We're in the same boat; i want to use the s3 like a mini computer too. I think it'd be great for business travel, when i dont really need a laptop during the day but want something when i'm back in hotel room. I'd much rather use hotel TV instead of a laptop because that's what i am used to at home... pc hooked to TV.
I've been planning to use the allshare cast dongle too, but they dont seem to be available yet. I was thinking HDMI out with the allshare.. charging with the wireless charging kit and then keyboard and mouse with USB OTG. My logitech unifying receiver for keyboard/mouse works perfectly i just need the wireless charging and allshare dongle to be released.
For what it's worth I tried a powered USB hub and could not get it to work with the s3.
faulkton said:
For what it's worth I tried a powered USB hub and could not get it to work with the s3.
Click to expand...
Click to collapse
Wait so your saying you tried a (a) powered USB hub with a OTG cable connected to the phone or you tried a (b) powered USB hub connected with a OTG cable to the MHL adapter and then to the phone?
If it was (a) then there are some vids out there of ppl using powered USB hubs.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
So has anyone received their Official MHL adapater and tried USB OTG?
Very interested in this.,,
I'm puzzled that there aren't any more postings about this kind of stuff. I was expecting the GS3 to be easy to use as a "PC" replacement but it seems no one besides us few wanted to do that ? A simple cable should have done it but I'd even be willing to shell out 40-50$ for a decent dock that would do just that
romulusram said:
So has anyone received their Official MHL adapater and tried USB OTG?
Very interested in this.,,
Click to expand...
Click to collapse
Me too.
But it is possible to get that this way working:
Code:
S3 -> Mobile Fun Connection Kit -> microusb -> HDTV Adapter TIP (5 to 11 Pin Converter) -> MHL HDMI adapter
|
-> USB -> keyboard etc.
Links
http://www.mobilefun.com/35462-mobile-fun-connection-kit-for-samsung-galaxy-s3.htm
http://www.samsung.com/us/mobile/cell-phones-accessories/EPL-FU10BEGSTA
Maybe I'm not reading these posts correctly but I am using an usb keyboard and a usb mouse on my S3 with no problems using these two accessories:
http://www.amazon.com/Belkin-USB-2-...e=UTF8&qid=1343845994&sr=8-1&keywords=usb+hub
http://www.amazon.com/Micro-USB-OTG...UTF8&qid=1343846045&sr=1-3&keywords=otg+cable
Have my keyboard and mouse plugged into the usb hub and then the usb hub into my usb OTG cable which of course plugs into the S3. Everything's working on my end.
romulusram said:
So has anyone received their Official MHL adapater and tried USB OTG?
Very interested in this.,,
Click to expand...
Click to collapse
I have the official MHL adapter and there is no female USB port on it for OTG
badbeat33 said:
Maybe I'm not reading these posts correctly but I am using an usb keyboard and a usb mouse on my S3 with no problems using these two accessories:
http://www.amazon.com/Belkin-USB-2-...e=UTF8&qid=1343845994&sr=8-1&keywords=usb+hub
http://www.amazon.com/Micro-USB-OTG...UTF8&qid=1343846045&sr=1-3&keywords=otg+cable
Have my keyboard and mouse plugged into the usb hub and then the usb hub into my usb OTG cable which of course plugs into the S3. Everything's working on my end.
Click to expand...
Click to collapse
You are not reading it right.
they want to use the MHL adapter, too.
As far as i can tell, the MHL adapter needs to be in the phone, not a hub. it is all dictated (the output being OTG, or MHL) by the impedance of what is plugged in. It is an either or situation.
Perhaps with a firmware update they MIGHT be able to run both signals and split it.. but i doubt it.
I've seen that Huawei Ascend Mate 2 can charge other phones thorugh a compatible cable. Can I find such a cable for my Samsung smartphone?
Thanks.
CooLasFcuK said:
I've seen that Huawei Ascend Mate 2 can charge other phones thorugh a compatible cable. Can I find such a cable for my Samsung smartphone?
Thanks.
Click to expand...
Click to collapse
You should be able to use any USB cable that has micro USB tips on both ends. Look for a male-to-male micro USB cable.
Not any cable, you need to get USB OTG cable, cost a few dollars on ebay or Amazon. It has micro-usb connector on one side (which goes to your phone) and full size female usb connector on the other side to connect any device (usb stick, mouse, keyboard, ext hard drive). Just make sure your phone supports USB OTG. Typically all the latest Galaxy phones should. That cable, usb on-the-go (OTG) has two pins shorted inside and turns your phone into a host so you can connect other peripheral devices, such as the one I listed above. And while it does that, it provides 5V power through USB bus like any usb host (your laptop or PC). As a result, you can charge other phones or devices from your smartphone. Just keep in mind, it will drain your battery
This is very useful, for example, if you have Note 2 with 9600 mAh Zerolemon extended battery (in my case), and use your phone to charge other devices with extra juice