Related
hee, guys.
Question: i want to change my rom and get rit off the tmobile skin and things.
so wich one can i use please help thanks
I have a mda pro tmobile simlocked
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33p8
Extrom version 1.12.125 WWE
hmm nobody???? 8)
Hi,
I changed my MDA Pro to the Qtek-Rom and the Radio to the 1.04.10
If you do so, also the language will be changed (from German to English) and the Keyboard-Layout ((Quertz to Querty) which you can resolve with some registry-hacks).
My device is running more stable and has more memory (Qutek is without any branding)
Teja
tjangoman said:
hee, guys.
Question: i want to change my rom and get rit off the tmobile skin and things.
so wich one can i use please help thanks
I have a mda pro tmobile simlocked
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33p8
Extrom version 1.12.125 WWE
Click to expand...
Click to collapse
I have the same PDA (MDA PRO T-Mobile Simlock) and i haven't ExtROM is normally?
Initially before put "1.12.125 WWE" what yuo have?
hee teja ,
so for me the next step is get the latest qtek rom and the Radio to the 1.04.10
and after that change some keys.
is it possible to explain me execly what i have to do because i am not familiar whit this software changing
you would help me allot
cheers
Will be no problem to help you - but this way I need some details:
Which kind of keyboard do you have? QWERTZ or QWERTY (look at your keyboard ant the first 5 letters are important).
You've to download the following files:
UNI_Qtek_WWE_11364_151_10300_Ship.exe
MaUpgradeUt_noID.exe
radio_1.4.10.zip
which all can be found at the ftp-server of the developers
ftp://[email protected]/Universal/
but you've to look in all folders (Roms + shipped Roms)
Make a new folder on your PC (maybe update)
Use WinRar to expand "UNI_Qtek_WWE_11364_151_10300_Ship.exe" to this folder
Copy "MaUpgradeUt_noID.exe" to "update"
Delete the radio.nbf in "update"
Expand "radio_1.4.10.zip" to "update"
REMOVE every card from your MDA (SD + SIM)!!!
Connect your MDA
Run "MaUpgradeUt_noID.exe"
if there is an error (mostly language...) run "MaUpgradeUt_noID.exe" again without changing everything!
After the update-prozess, you don't have to disturb the installation of the programs (it's only usefull stuff, no branding).
Change the key-respons from QWERTY to QWERTZ:
Use a registry-program like resco explorer with registry add-in and change the following key:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
change: Layout from 66569 to 66567
You can also change the soft-keyboard, but I'll tell later because I've to go!
Good luck!!!
Teja
if you got
Now at home with MDA Pro:
Here is the link how to change the symols in the soft-keyboard:
http://forum.xda-developers.com/viewtopic.php?t=34398
Some things cannot be changed in the soft-keyboard but that's no matter!
Have a nice weekend,
Teja
Teja said:
You've to download the following files:
UNI_Qtek_WWE_11364_151_10300_Ship.exe
MaUpgradeUt_noID.exe
radio_1.4.10.zip
which all can be found at the ftp-server of the developers
ftp://[email protected]/Universal/
but you've to look in all folders (Roms + shipped Roms)
Click to expand...
Click to collapse
Hello Teja,
The site you give here requires password.
I looked here:
ftp://ftp.xda-developers.com/Universal/
But can't find the mentionned files.
Other thing did you perform a backup of your original ROM? If yes how?
Thank you
No, I didn't perform a backup, and I think it isn't possible at the moment.
Here are the direct links. Hope they'll work:
ftp://xdaupload:[email protected]/Universal/MaUpgradeUt_noID.exe
ftp://xdaupload:[email protected]/Universal/ROMs/radio_1.4.10.zip
ftp://xdaupload:[email protected] ROMs/UNI_Qtek_WWE_11364_151_10300_Ship.exe
Maybe you should copy the whole links in your browser and it'll work. I use firefox 1.5 and I'm able to browse on the ftp-server...
Have a nice week and good luck!
Teja
Thank you!
Hello Teja,
Those links are working fine.
Thank you!
Re: Thank you!
Lousticdr said:
Hello Teja,
Those links are working fine.
Thank you!
Click to expand...
Click to collapse
Sorry I made a mistake: I gave you the link for a old radio-update...
Here is the correct one (I also edited my post):
ftp://xdaupload:[email protected]/Universal/ROMs/radio_1.4.10.zip
If you've allready done the updates, you can make the radio-update without loosing any datas:
rename all *.nbf to *.old and copy the new radio-file in your update-folder. Run the MaUpgradeUt_noID.exe (maybe twice) again.
The MaUpgradeUt_noID.exe will only show the radio-update!
Just do it - after finishing, soft-reset your device (no hard-reset is necessary).
Enjoy the new update!
Teja
hee teja the first letters are qwerty and i have a mda pro tmobile simlocked
Ihave everything downloaded also the resco.
i don,t have to worry a bout stuck in the bootloader and things??
i,ll have to work so i am gonna give it a try tommorow.
thanks again 8)
rom version 1.12.42 WWE
rom date 08/23/05
radio version 1.00.02
protocol version 42.33.p8
EXTROM VERSION 1.12.125 WWE
Hey,
I first felt into Boodloader-Modus, but it was my own fault. It took a long time to solve the problem, but it was very easy:
REMOVE ALL CARDS FROM YOUR DEVICE! SD + SIM!
My one was "Net-Locked" and I've never heard about problems with "Sim-Locked" (but I always was not interested in)...
Teja
Error while radio/complete update
Hi,
today i tried to update the radio on my mda pro:
- I removed the SD and the SIM card.
- I did a reset
- I started the MaUpgradeUt_noID.exe 2 times
- the upgrade started but stayed on 0 % for 5 minutes
- then it stopped with an error and I still got the original version
I tried this 3 times and I even tried to do a complete update as it is suggested here and always got the same error message.
Can this be because of active sysnc, the virus scan program or the cable (although it is the original cable)? Do I need Active Sync for the upgrade or can I stop it somehow?
Hi,
it is suppost to close "Active Sync" (by Task-Manager) and to disable the firewall / antivirus, but I never had problems without doing so...
Is your MDA in BL-Modus when you want to update (blank screen) or is it still in "normal" modus?
Maybe you've the possibility to use an old computer/notebook without any programs running on?
Teja
Radio update problems
Hi again,
it is in blank screen mode - but if you look very closely (the backlight is off) the screen sys something like updating radio... please wait.
and what happens?
nothing happens - just an error after 5 minutes
I tried it with the bootloader mode afterwards and then it worked with the radio update. afterwards i tried the full update with bootloader screen - but it only worked the second time...
It's written in this topic that you've to run the update 2 times ==> so it works perfect! Congratulations!
Teja
Teja, thanks for your mini howto guide above. I am now installing the Qtek rom on my MDA Pro.
However you should realise that only germans use QWERTZ keyboard layout, the dude who started this topic is dutch, so am I, we use QWERTY. So the info on that part is somewhat useless.
But thanks again
Hi there
i am new here and i understand something but not all....
I have a Frenche Htc cruise with SFR sim and personalization....
probably is locked i don't know i cannot even see parameters for MMS, Internet etc.
My problems: i cannot use french language, i want gps usable
second problems: i can't understand all the procedure:
- how to backup rom image ?
- if i backup the rom all parameters (i.e. mms internet etc) can be saved and restored ??
- I understand how to flash it (instructions found here) what will be the best rom available in english ?
- how to restore parameters for surfing, mms etc ?
- how to do soft reset ?
- how to do a hard reset and what conseguencies ont the data ?
- how to make GPOS working ? where to load italy maps ?
where find and how to install a gps software ? (i have garmin maps is it possible to use them ?)
well if somebody can give me fool proof instructions and help i will really appreciate or i will have to sell this new phone because i understand french so bad......
thanks
Iv installed TLR Diamond ROM 1 and my fone had a Russian Rom on it when I bought it. Can anyone help me?? When I try contacting to vodafone..the wait cursor appears but nothing happens..
Thats strange..
did you install anything else? If yes, then try a hard reset first.
Thanx for the rep mate but as a matter of fact i tried everything, u c i have have alot of devices and frequently ugrade most of them and have never bricked any of them..but the diamond just dosnt work for me. Tired installed signed and unsigned roms with the reqiured spl'z but...
Even when the roms are loaded the system is slow and non-responsive. It was fine when i bought it with the Russian rom on it..WHATS WRONG...Dont have a clue..
Did you try installing the new roms that came out yesterday? with updated localization(network settings)???
that sounds like new "region protection" in action.
see this thread for details:
http://forum.xda-developers.com/showthread.php?t=402740
Thanx for the info guys.. oddball1~ i did try installing the newer roms that came out yesterday but no help there..I guess SecureGSM is write..just read the thread and I think its the region protection. According to that nothing simz to wok AND its work in progress..i guess i just have to wait or start tryn cookin my own roms..lol
Diamond finally Working
ok guys..iv installed the Russian rom back on the device and now the networks connected.As for before everything was working fine..touch flow n all only no network..but after the Russian rom..all gud...So according to my knowledge there is a lock with the network that only allows the Russian stock rom...if only there was a way to change the language...m able to change the language of the touch flow by changing the language code in the registry but not the whole rom..as i can remember some guy changed the laguage in the registy and installed a software which changed the roms language but it wasnt a diamond....hmm..more googling i guesss...Any help!!!
Hi All !!
First - Thanks alot for this forum! it's the BEST!
I'm currently using PDACornerPro.V27 on my TyTN. but the same error happend with Schaps, Corner v20 and another TouchFLO rom.
Whenever I install Paragon LENG hebrew support on my device it just disables any way of accessing the Phone Dialer and the Contacts. Removing it doesn't work either, once installed - it f#$ks it up for good.
I've tried searching the registry with no luck whatsoever...
Can any of you Hermes Gurus help me out here?
Thanks!
hebrew on tytn wm6
NEW HEBREW BY ME:
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
don't use the LENG hebrew,in addition to the problems u describe, its doesnt support the hardware keyboard of tytn.
personally this is what i do:
1.install Hebcert.cab from orange extended rom(attached below)
2.install 180407_HebrewTyTN.cab but DONT restart when prompted.
3.goto Progs. Lang setting(hagdarot safa 3 letters icon alef bet gimel) change the upper bar from the top option to buttom(it suppose to say interface lang. and the upper is hebrew the other is english but you cant c before reset)
4.now press (x) to reset
//////note: u dont have contacts hebrew browsing in the normal contact manager,
so use pocketCM with the setting.ini file i attached(just put in the pcm folder in progam files
//////also u dont have smart dialling for hebrew, so use this one jimmy98 made for us its works great with htc touch dialer also attached below(u can use different skin with hebrew letters).
ENJOY
Nimitz.
http://www.pocketcm.com/downloadfile.php?f=PocketCM-0.27.zip
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
Thank you so much!
haven't tried it yet since it requires me to flash a new rom, I'll get to it this weekend.
anyhow, thanks alot, it's nice to have a supporting community.
bekef dude
u know u can hard-reset right? that way u dont have to flash anew rom
but if u feel like changing anyways i recommend this ones:
http://forum.xda-developers.com/showthread.php?t=428597
http://forum.xda-developers.com/showthread.php?t=439973
i use the last one cause its lighter but if u dont feel like working much go with the first it has everything plus youtube and google maps etc.
Yeah, I know I can Hard Reset.. but I've been meaning to change to a new rom for sometime now, and Hard Reset will make me install everything all over again so I used the opportunity to flash.
I have a problem with the hebrew, Maybe you came across it too - after installing the hebrew, When I press the power button the device goes to standby and when I press the power again it doesn't get out of it until I soft reset it...
It renders the device quite useless..
P.S I've flashed the device with the rom u've recommended. it's reallllly fast.
Tytn Doesnt wake up
its a known issue hate it when that happens
you can read more here:
http://forum.xda-developers.com/showthread.php?t=273836
it happened to me a few times i still havent figuered out why,
but thebest solution is to change the rom,
try falshing another rom i'm working with the lighter one ive posted and it works smooth havent tried the other so i guess thats the one you flashed.
good luck
No luck... so far I've tried with 4 different ROMs and didn't succeed in any attempt, I've tried both of the ROMs you've recommended, PdaCorner v.27 RBSN 3G and CRC dev 14.1 beta... as I said, The hebrew installs fine but once the device goes to standby/power saving it just dies...
I've tried doing what the post you've ref'd me to offered - disabling the advance network features on the pc-usb connection and removing some addons like the Voice-Commander... no luck either... been at it all night
is it possible that HebCert.cab or 180407_HebrewTyTN.cab you've attached are not of the right version?
The Hebrew is WAAAAAAY better than Paragon's LENG (as long as the device stays on) that doesn't even let me use Opera past ver8.6, and I'd really hate to give it up.
Please advise..
the version of the hebrew is from my phone but is identical to the hebrew cabs from other orange tytn phones.
+iv'e dumped my ext.rom like a year ago then my phone broke (physicly) just last week and
the new tytn orange gave me had the same exact cabs for hebrew
(with almost the same rom newer version but wm5 uglyass green lame-o)
so that's not it for sure..
++it happened to me as well with several roms with the same hebrew cabs
for no apparent reason but now it works just fine.
+++u can always go back (assuming u backedup)to the original orange rom
that came with your tytn and dump the hebrew cabs from your ext.rom though it will be a waste of time.
one thing i did that help with the PDAcorner's older version with this problem was to update the HARD-SPL version to 2.3
..so check your spl version by reseting to the bootloader
(reset while holding the power button and the top left ok button)
if its lower than 1.40 theres a big chance an update would do the job..
http://www.mrvanx.org/thg/
update to 2.1 or to the latest then reflash i suggest to http://forum.xda-developers.com/showthread.php?t=439973
cause we know it works for sure.
+don't install nothing not even the hebrew..check if the device wakes then install ONLY the hebcert(btw:u install this first always) and main file but change the interface language before reset so it wont boot with hebrew menus even once..post back if the problem presists.. good luck
I Refuse to give up!!
Well, I did everything you offered, bit by bit -
1. Updated to HardSPL 2.1
2. Flashed to HTC_HERMES_S64_WM_6.1_TouchFlo2D_UC_V5_WWE_12.11.2008
3. Did an ON and OFF tests, few times - after power off, soft reset eg.. (ps I found out that Soft Reset from the os doesn't work either after the hebrew installation - so I checked that too) - all worked fine.
4. I've installed the HebCert.cab and then the main file.
5. changed the interface language to english.
6. Reset and voila... same bug all over again
I thought maybe it had something to do with installing the hebrew while the tytn is connected to activesync so i did all that without it being so.
got any more ideas?
# _
listen this time youll get it stright,..
i think its all cause you got the WRONG rom..
i saw you wrote "HTC_HERMES_S64_WM_6.1_TouchFlo2D_UC_V5_WWE_12.11.2 008" rom while i was talking about:
27/10/2008 ROM 3.62.502.20 (Manila2D) V.20 Build 20921 by PhamQuang
http://rapidshare.com/files/157947939/HERMES_WWE_3.62.502.20_B20921_Manila2D.rar as the lighter rom installed
anyways i felt kinda guilty cause i recommended it (though i told you i havent tested it but i guess you didnt understand to which one i was refferin)
so i flashed the rom you were talking about just to check
and suprise suprise my tytn didnt wake same as yours..
reflashed back to 27/10/2008 ROM 3.62.502.20 (Manila2D) V.20 Build 20921 by PhamQuang(http://forum.xda-developers.com/showthread.php?t=439973)
and TA-DA works like a charm..
so i would suggest to repeat the same stages as from your last message only this time with the right one
good luck buddy im sure this time itll work
btw the password for the file ishamQuang
If I haven't said it so far - thank you ever so much for your time and effort.
Well, I did write the name of that rom but I've tried both roms on the same process...
I did, however, manage to get some progress on another angle - I've updated my radio version (was the only thing we didn't cover) and now it works with the Manila2D rom. alas, nothing else seems to be working...
I've started to install all my favorite progies (Adobe Reader LE, PocketRAR, SPB Insight, JBED, Opera Mobile, Opera Mini, etc...) and everytime the darn phone hangs on one of the installation and just DIES... only hard reset can revive it...
I'm gonna start from scratch - tomorrow I'm gonna take a naked rom and start building on top of it... I must be doing something wrong. only good indication is that the phone can get in and out of standby WITH the your hebrew version - so I know the hebrew is ok.
I'll go thru with it tomorrow and keep you posted.
again, I really appreciate your efforts to help. thanks.
your very welcome.. to be honest its just cause were both israellis and also because i went through this crap myself but no one here could really help me i had to solve it myself..
i DID forget to tell you the first thing i did to the phone was to SUPERCID unlock it:
http://pof.eslack.org/hermes-unlocker/http://pof.eslack.org/hermes-unlocker/
try it if you havent already, mayb the protection is whats causin all the freezes. plus its unlocks the sim bull****.
GL again
BTW:
you dont need to install opera for manilla2d:
http://forum.xda-developers.com/showpost.php?p=2860699&postcount=4764
or use the file ive attached.
plus its better lookin htc version.
and use this as the PDF reader 100x faster than adobe:
http://forum.xda-developers.com/showthread.php?t=425268
http://www.4shared.com/file/69693567/504106d/Update_20.html?dirPwdVerified=2117bcd2http://www.4shared.com/file/69693567/504106d/Update_20.html?dirPwdVerified=2117bcd2
Great (Partial) Success!!
Ok! here's what I did and some conclusions I've come to:
1. flashed CRC r14.1 Big Storage ROM.
2. Installed ALLLLLLLLLLLL of the app's I needed prior to the hebrew installation.
3. Cleared all Caches, Temps, and MRU lists etc using SKtools.
4. Clean Start the device (SR).
5. Installed the hebrew, changed interface language and Soft reset.
6. Enjoyed my new revived device!!
now the only thing that DOES go wrong is the Java emulation, I've tried all available versions of Esmertec Jave (20080222 3.1M, 20080328.31 and 20080428.2.1) Tried installing to the device and to the SD and didn't succeed. I also tried to use the Device Update feature of CRC to get the latest java version from thier repository... didn't succeed either.
The thing is, before the hebrew was installed all versions worked fine, and after that NONE did...
I also think that this piece of software is what causing the device to die!!
After I remove the java emulator the device just hangs on the boot screen.
I've flashed my device numerous times with a whole bounch of ROMs, The conclusion I came to is that the hebrew worked on MOST of the ROMS didn't have JBED pre-installaed!
I would have checked it but I'm tired from flashing and installing stuff on my device for now, maybe next month... I gave up on using OperaMini since I don't have a working java emulator currently.
Which, if any, are u using?
Thanks for all the pieces of software you've recommended, I tried the PDF reader you suggested and I like Acrobat LE 2.5 Diamond edition better.,,
Anyhow - It's working now. so as my project instructor said - if it works - don't touch it!
Thanks alot for now! I WILL try to isolate the problem and keep you posted!
I Owe you man..
http://forum.xda-developers.com/showpost.php?p=1487409&postcount=67http://forum.xda-developers.com/showpost.php?p=1487409&postcount=67
http://www-jpc.physics.ox.ac.uk/ge
tjpc.html
i use it only when i get bored and start messin with stuff..
glad to hear u finnaly naild it
feel free to ask or recommend stuff to me espcially hebrew ot israel stuff
c u on the flipside
btw: i just found out something cool when you hold the green talk button from 2 sec it turns on/ff the speakerphone
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
badnimits said:
NEW HEBREW BY ME:
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
don't use the LENG hebrew,in addition to the problems u describe, its doesnt support the hardware keyboard of tytn.
personally this is what i do:
1.install Hebcert.cab from orange extended rom(attached below)
2.install 180407_HebrewTyTN.cab but DONT restart when prompted.
3.goto Progs. Lang setting(hagdarot safa 3 letters icon alef bet gimel) change the upper bar from the top option to buttom(it suppose to say interface lang. and the upper is hebrew the other is english but you cant c before reset)
4.now press (x) to reset
//////note: u dont have contacts hebrew browsing in the normal contact manager,
so use pocketCM with the setting.ini file i attached(just put in the pcm folder in progam files
//////also u dont have smart dialling for hebrew, so use this one jimmy98 made for us its works great with htc touch dialer also attached below(u can use different skin with hebrew letters).
ENJOY
Nimitz.
http://www.pocketcm.com/downloadfile.php?f=PocketCM-0.27.zip
http://forum.xda-developers.com/showthread.php?p=2970594#post2970594
Click to expand...
Click to collapse
Shalom,
Do you know if it works on an HTC Dual Touch with Windows Mobile 6.1 US ?
The HTC Dialer above is 2G version?
Are there any 3G version for WM 6.1?
Thanks
THIS METHOD IS ONLY FOR TRADITIONAL CHINESE
i think there is several hong kong or twiwan user of WM6.1 KisS20.4 Rom here..
this is my first time flash my rom in english......
after flash..i found that it is a very good rom that run fast and smooth..
however,i found that it is not available that install ce-star or monstar chinese with the UC package with M2D....
i like this rom and thank spocky12 very much
after i try more than 20 methods...i find several software is available for type and read chinese with M2D and run smooth....
i suppose all of you have this rom
here you go!!!!
1.Install UC package With M2D
2.go start->setting->system->remove program
DelETE the fontchange
3.download this..
http://www.sendspace.com/file/9it37b
install it
4.this is a typing method which hong kong user know about that..
筆劃輸入法
http://www.badongo.com/file/9838987
soft reset
5.go HKLM/software/Microsoft/Fontlink/SystemLink
HelveticaNeue LT 35 Thin=RAMdisk\Windows\Fonts\MSYH.TTF,微软雅黑
HelveticaNeue LT 55 Roman=RAMdisk\Windows\Fonts\MSYH.TTF,微软雅黑
SOFT RESET..FINISH~
Great Job!!!
I am a HK user, and i have searched this great job for 6 months, but I still cannot find any posts except this post that teach traditional chinese's user to flash UC rom and make it to read and type traditional chinese.
Thank you very much, however, i will try this method for my KS20 after spocky12 release the new rom soon.
p.s. Thank you for spocky12
Great job bun_0806 !
I've updated first post of KisS20 thread to add a link here.
Thanks
I remember to have installed Ce-star after flashing spocky's rom. But after many bugs I simply removed Ce-star. Then I preferred installing a single font with respective registry modifications. By the way I'll try your method to see if it will give any different result. Thank you
Lemark
may you upload some detail for me?
i want to try your method
bun_0806 said:
Lemark
may you upload some detail for me?
i want to try your method
Click to expand...
Click to collapse
You can put your font in the windows directory of your phone and then modify the registry values. I have msyh.ttf (font name YaHei) for example, so I need to modify the registry values under
[HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\SystemLink]
as
"YaHei"="\\Windows\\tahoma.ttf,Tahoma"
"Tahoma"="\\Windows\\msyh.ttf,Yahei"
"Courier New"="\\Windows\\msyh.ttf,YaHei"
"Arial"="\\Windows\\msyh.ttf,YaHei"
"Times New Roman"="\\Windows\\msyh.ttf,YaHei"
Main disadvantage of this method is that non-unicode Chinese characters become gibberish. Also China will still be unavailable in the regional settings.
Your method is superior to mine as it can truly enable Chinese support
The cab file in following link will install a font and modifies the respective registries. You can install it on top of Spocky's rom. It was made by someone named samau, so all credits should go to him.
http://www.megaupload.com/?d=JK4PDYWK
http://www.rayfile.com/files/e6e3307d-f9f3-11dd-b9f8-0014221b798a/
support and display T.Chinese
hi all~
there is a useful site included how to make eng wm to support T.Chinese and change the interface to T.Chinese that i found.
http://www.studiokuma.com/wm/?section=support
i tested on my ks20 with KisS20.4 Rom already.
it can be read and write/type chinese perfectly, write chinese meaning it support handwriting input But, the problem is cannot use PlumSIP6 after that. Can anyone solve it??
finally, i havn't test the chinese interface, if anyone interest, go try and report.
Here, I hope someone can develop a perfect T.chinese version rom for HK ppl, the original rom in HK was very very weak...
Thankyou!
**Remark** install Enable_No_Policy.cab first before you do anything is a must.
karltong said:
hi all~
there is a useful site included how to make eng wm to support T.Chinese and change the interface to T.Chinese that i found.
http://www.studiokuma.com/wm/?section=support
i tested on my ks20 with KisS20.4 Rom already.
it can be read and write/type chinese perfectly, write chinese meaning it support handwriting input But, the problem is cannot use PlumSIP6 after that. Can anyone solve it??
finally, i havn't test the chinese interface, if anyone interest, go try and report.
Here, I hope someone can develop a perfect T.chinese version rom for HK ppl, the original rom in HK was very very weak...
Thankyou!
**Remark** install Enable_No_Policy.cab first before you do anything is a must.
Click to expand...
Click to collapse
HAY GUY...the file i uploaded is the full version of MSJH.TTF
the file you find in KUMA is good but not function on kiss 20
because it will reload the wince back to your ppc
it will lead many many problems there
for example...you have to reset your ks20 successful more than 10 times
hi bun,
thanks a lots, your method can run chinese smoothly, but I get some problem when I use, detail as below:
after upgrade WM6.1 KisS20.4 Rom, this rom is fastest and stable one that I try in my KS20, after upgrade all sim card cannot work. I use this phone in Hong Kong and had tried 3 Hong Kong (3G), PCCW (3G), People and China mobile sim card also. All have same problem - cannot register the network.
I also copy the xml from HK10a rom of HK telecom provider in /windows/networkprofile, can select my telecom provider name but also the same.
After I flash back HK 10a.rom (http://rapidshare.com/files/12754205...2008_.rar.html), now the phone still the same cannot register any network, but can search its own network.
I use LGMDP_EURO to flash the rom in emergency mode with unbranded rom (since I heard all HK LG ks20 is unbranded) KisS20.4Rom
Now even I flash other rom still get the same problem.
please help, thanks
pinstudio said:
hi bun,
thanks a lots, your method can run chinese smoothly, but I get some problem when I use, detail as below:
after upgrade WM6.1 KisS20.4 Rom, this rom is fastest and stable one that I try in my KS20, after upgrade all sim card cannot work. I use this phone in Hong Kong and had tried 3 Hong Kong (3G), PCCW (3G), People and China mobile sim card also. All have same problem - cannot register the network.
I also copy the xml from HK10a rom of HK telecom provider in /windows/networkprofile, can select my telecom provider name but also the same.
After I flash back HK 10a.rom (http://rapidshare.com/files/12754205...2008_.rar.html), now the phone still the same cannot register any network, but can search its own network.
I use LGMDP_EURO to flash the rom in emergency mode with unbranded rom (since I heard all HK LG ks20 is unbranded) KisS20.4Rom
Now even I flash other rom still get the same problem.
please help, thanks
Click to expand...
Click to collapse
are you lost your NV FILES?
is possible to have handwriting for chinese