How To Downgrade O2 Stealth to WM5 (SDcard method) - Upgrading, Modifying and Unlocking

this is my very first time starting a thread (need half an hour to figure it out) lol
please... be easy to me.
due to many friends here asking how to downgrade an O2 XDA Stealth to original WM5, i'm trying to find a way... and this is it...
1. download original Stealth WM5 ROM from:
http://www.myxda.com/xda-stealth_servicemenu.aspx#software
choose your country, then next...next...next... till the link for downloading appeared.
2. run the file you've download, click next...
notice the path where the file extracted to. in my laptop it is:
C:\Documents and Settings\dr. Ghozali\Local Settings\Application Data
3. you'll find a new folder named "DSUU"
open that folder, and there will be:
CUSTFILE (folder) ==> this is the extended ROM
DSUU.exe (hidden)
gbcall.nb0 (hidden) ==> this is the WM5 ROM you wanted so badly...
GbcFormat.dll (hidden)
GbcFormat.exe (hidden)
UpdateRom.exe (hidden)
let's see... there is 5 hidden file inside "DSUU" folder, so.. make sure you've already set ur PC to show hidden files.
4. copy the "CUSTFILE" folder and the "gbcall.nb0" to a less than 1G FAT formatted MiniSD.
don't forget to edit the properties of "gbcall.nb0" (uncheck the hidden option)
5. insert ur miniSD to ur Stealth, then power off
6. push the "Green" and "Red" button (hold it) then power ON ur Stealth
... u'll be going to O2 Logo (for about 3-5 seconds)... then the update progress will start.
7. be patient... it will need about 20-25 minutes for a complete flash.
if the flashing process was succeeded ur stealth will automatically soft reset.
wait until the "Tap Here to setup your device" appeared
8. do a HARD RESET
how to???
==> push and hold the "windows" and "OK" button, then poke the soft reset hole with ur stylush.
Welldone....
you've downgraded ur O2 Stealth to original WM5
p.s.
i've already tested on my Stealth and it works 100%
*note:
please make sure your battery was fully charged before doing this downgrade process.
i'm sorry for my bad english...
i am Indonesian

by the way,,
if u want more space, u can just flash the gbcall.nb0
no need to flash the Custfile folder. but.. of course, there will be some appllication missing. e.g. the operator setting.
well.. please report any problem or any succeeded with this method, so we can learn together.

thanks for the info mas...
i've been stuck last time flash to wimo 6.1..the problem is can't read the CUSTFILE..
at last now with ur advice my stealth already normal to wimo 5..

Thanks brader....
I've downgraded my O2 stealth back to winmo 5
Thanks for the info

anyone have other link for rom xda stealth wm5??

Related

HOW TO: Rom Upgrade - Universal / XDA Exec

Well, this is pretty newbie advice to most of you, so you may think it doesn't warrant a write up, but I had to do some searching for info on how to upgrade my ROM so I thought it would be good to put it all in one thread.
1) Download the ROM you want from the FTP server....Details here http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
2) Download MaUpgradeUt_noID.exe to your Desktop from here http://forum.xda-developers.com/download.php?id=7644
3) Disconnect your device from the USB cable.
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
You will notice that the screen of the device is dark but has “USB” and "v 1.0" written on it.
5) Connect back your device via the USB cable.
6) Run the download ROM upgrade application...When it prompts you to begin the upgrade process, just minimise the window or leave it alone (DON'T CLOSE THE PROGRAM).
7) Whilst it is running, use Windows to search for a file named RUU.dll
8 ) Right click file and choose ‘Open Containing Folder’
9) Select all files and copy them
10) Create a temporary storage location....C:\Upgrade....And Paste all copied files in here.
11) Copy the file MaUpgradeUt_noID.exe from the desktop into C:\Upgrade
12) Close the previously started upgrade application running in the background
13) Run MaUpgradeUt_noID.exe from it's C:\Upgrade location
The upgrade process should begin now…If it does not, run the MaUpgradeUt_noID.exe application again
Make sure you DO NOT DISCONNECT the cable.
The upgrade takes around 20 minutes to complete.
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
Thanks.
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Mento said:
Thanks!
There is only one thing, step 4, it is not USB but Serial.
Click to expand...
Click to collapse
It will go to USB when upgrading.
It doesn't seem to work with last Qtek 9000 ROM...
Help!
OK, I made my own instructions. Follow this instruction of mine:
The file is extracted in your computer. Once you run the shipped.exe file, you need to go to:
My Computer
Your Drive (mine is Drive C)
Show the contents of this drive
Documents and Settings
Choose your folder name
Choose "TOOLS" from the menu bar
Choose "FOLDER OPTIONS"
Click on the "VIEW" tab
Click on "HIDDEN FILES AND FOLDERS"
YOU WANT TO SHOW ALL HIDDEN FILES AND FOLDERS
Now go to TEMP folder
Now you will notice a bunch of folders will show up, tons of them to be exact. What you need to do now is click on the shipped.exe file again and "LOOK" for the folder being created because that folder is what you want to copy. If you did not see it created, you have to manually open each folder and look for the files I listed below.
Assuming you found the folder, you will have these following files inside that folder:
ms_.nbf----------------------this file is responsible for EXT ROM Version
nk.nbf------------------------this file is responsible for Windows Mobile Version
radio.nbf---------------------this file is responsible for Radio Version
EnterBL
GetDeviceData
readme
ROMUpgradeUt
RUU.conf
RUU.dll
UI.dll
MaUpgradeUt_noID
If the file MaUpgradeUt_noID is not there. You need to get hold of a copy of this file as you need this.
There you have it, REMEMBER, you need to have the MaUpgradeUt_noID file plus all the rest of the file if you want to upgrade to the ENTIRE I-Mate ROM, QTEK, O2, or whatever ROM you want.
If you only want to upgrade to the radio version then you need to delete 2 files namely: "ms_.nbf" and "nk.nbf". Leave "radio.nbf" alone and click on the "MaUpgradeUt_noID" file to initiate the Radio installation. Basically those 3 files control what you want to update on your device.
Hope my instructions were clear enough for you. Hope this helps.
cannot locate files after running exe
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Re: cannot locate files after running exe
SteveInUK said:
Hi All, I have ran the ROM update exe and the message saying extracting file XXX etc appears OK then the program closes. When I search for the files, for instance *.nbf they dont exist anywhere on the computer - does the exe autodelete the temp directory and have I missed a stage ? Any help gratefully accepted
Click to expand...
Click to collapse
Did you follow the instructions above on how to show hidden files and folders? After double clicking the .exe file and running it, leave it open then look for the NEWLY created folder in the TEMP folder as instructed. You need to look for it the hard way by opening each folder one by one and check for the files to see if you got the right one.
someone advised me for some extra step, someone please advise is it coorect steps:
"Then you need to make a small change to one of the text files. Look in the directory for
RUU.conf
Open it in notepad and add this line
[CHECKCEID_TYPE]=1
then save it
That’s about it….."
thx for reply christian,
yes i tried searching every folder the manual way but still no joy, I have just copied the rom exe onto my other computer and it worked OK on there and updated my exec without any further problems
Hi All, Linked to the update of the exec software , i noticed the audio playback on tom tom navigator and media files is very jerky to the point you can hardly make out what is being said. has anyone else had the same problem and have you found a solution to fix the problem ?
many thanks
Steve
Bricked QTek 9000
I got a Qtek on ebay and it was working when I tried to upgrade it failed with a "115" Radio Error.
Tried the method on this thread and it completes the upgrade but when I reset, I does not change from "USB v1.0" can anyone help!!!!
Hi
I'd like to take the risk for updating my Dopod 900 for new versions of ROM & radio, but I've got couple of questions.
1. I've got Dopod 900. I do understand, that it's absolutely the same with Qtek9000, but to be sure: may I use ROM update for Qtek?
2. My ROM (1.13.69) & radio (1.04.02) as of 10/12/05 are ancient What version of ROM & radio consider to be stable as of now? I saw in signatures that people using ROM 1.30.77 and radio 1.09.00. Are they OK?
3. I got on FTP and was a bit confused: as far as I understood the latest ROM is 1.30.100 (UNI_QTEK_130100_190_10900_ESN_Ship.exe), but it's for ESN (Spanish???) localization. So in order to get WWE I should use UNI_ORUK_13090_174_10300_WWE_Ship.exe and that update radio separately from 1.03.00 up to 1.09.00 or just UNI_QTEK_13077_176_10900_WWE_Ship.exe? What would u advice me?
4. What is the benefit for updating from 1.13.69 and 1.04.02? Will it works faster & more stable?
Thx in advance & take care
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Hi I have a Xda Exec
ROM: 1.13.82 WWE
Rom date 11/30/05
Radio 1.04.02
Protocol 42.37.P8
Ext Rom 1.13.188WWE
And when i do this:
4) Hold the Power button + Light bulb button, and press the reset pin found at the back of the device (fiddly if you have large fingers).
The devide says me:
Boot options:
Enable KITL
Clean registry hive
Format storage
I soupouse that it isn´t the boot loader for go on with the proces... what happens?
I want to upgrade to UNI_QTEK_13077_176_10900_WWE_Ship.exe for use my heasphones motorola stereo... (AD2P..)
Can any body help me?
Thanks a lot
Please!!!
Edit post number 1 and add as the last step:
14: Disconnect the USB cable when told, then push the reset pin. Ignore the advice to do a hard reset by holding down the soft keys while you do this, just push the reset pin by itself. Your Universal will load the new ROM image and you're all done.
It seems that a lot of people are having trouble after a ROM upgrade by following the instructions on the upgrade program which tell them to hard reset.
Many thanks! PU10 by German T-Mobile upgraded to WWE
I have a T mobile mda pro, any recommendations as to what the best rom is.
Im torn between the new orange rom which is supposed to be good and the jasjar one?
Anyone?
Latest jasjar ROM
Hi,
Can I follow these instructions with my UK jasjar?
Where can I find the latest Rom?
Cheers
Anyone can point me out to the adequate ROM?
thanks
astpaul said:
Hi
I tried this and get a 120 (incorrect country ID) error.
Strange, my V1640 from Vodafone is spanish and i want to upgrade to UNI_QTEK_130100_190_10900_ESN_Ship.exe
so it should be ok.
Am i wrong? Is there a way to get rid of that message?
Click to expand...
Click to collapse

imate PDAL ROM Upgrade problem

Hi all,
Not sure if this is the right place to ask but I am stuck at a dead end.
tried to upgrade PDAL ROM to 3.0 (from 2.01)
Got a blue i-mate screen never went out of it.
tried all the hardreset tricks, no use.
tried to reinstall RUU with activesync, no use.
What else can be done?
for example, would it be possible to delete the ROM totally and reinstall it? how?
Appreciate your comments
regards
sy
I have the same problem
Would anybody be able to help, please reply to us. Thanks!
I've just spoken to the customer service from i-Mate. This issue can only be resolved by their service centre. So, no any simple solution so far.
Please be aware when you want to upgrade it.
my device is in service center for 7 days and they could not come up with a solution. I hope it is because they did not start working on it yet
1. Download Romupdate v1.11a
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run Romupdate v1.11a (from downloaded)
5. from left top corner drop down menu Port: Choose WCEUSBSH001 (If you only see COM 1 and COM1 try unplugging the USB and replugging it)
6. press OK button
7. type "set 14 0" without the quotes in blank window that showed up to tell bootloader to boot the OS after reset.
8.press enter to execute
9. on next line you will see:
HTCST ÚÈÒHTCEUSB>
10.type "task 28" (no quotes) right after > sign to get your device formatted
11.press enter to execute, you gonna see:
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>
12. type "task 0" (no quotes) right atfter > sign to ask your device reboot
13.press enter to execute the command
14. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
hi
wher i can find the Romupdate with arabic or without
and
how i can hard resit from the key not from system
th
Don't think mtty will work as PDAl is not an HTC device..
dear gun
thanks for your info but i want to ask you a Quastion from where i can get the driver for pdal in bootmode (rndis omap730)
thank you
PDAL Problem
I too am facing the same problem with my PDAL. I upgraded the rom version and now am just getting the initial blue screen with the imate details. Please help in solving this as i just cant seem to be going forward. Any ideas how to get the device booted up and working .
response to the above two question
1. How to enter Bootloader in PDAL?
I inquired the service people and was told it can be done by pressing power button and left soft key simuteneously and tap the reset hole. I have tried and it did work.
2. Any solution for not passing the welcome screen?
It seems there isn't any solution, other than sending to their service centre. It will take a long time. My phone has been there over 2 weeks but I was told they are still awaiting part. I guess they will replace the main board.
3. PDAL isn't HTC device?
I think it is. The code with HTC should be Pean. The service centre also listed it as HTC device. But I am not sure if MTTY can work.
How to enter Bootloader in PDAL?
my phone alwys login blu scren then restart
Im pressing power button + left soft key and tap the reset hole but not wok in Bootloader !!!
Flashing your Imate PDAL
Dear All,
I Have enough experience of Imate PDAL , It's too simple , just follow the steps below:
1- got any ROM version from Imate website "www.clubimate.com"
2- Format your Imate flash card using your PC ( use any USB card reader matches the size), "FORMAT WITH FAT OPTION ONLY , DON'T FORMAT WITH FAT32 " and keep it connected to your PC for now.
3- prepare your PC to show all hidden files using "folder option " from your PC control panel, without this you will not be able to access the below in step 5>
4- run the EXE ROM file of Imate Rom on your PC but don't follow the steps on the screen , just keep it waiting for an action)
5- now browse your PC ( go to your windows Temp folder in the boot sector of your windows " Example C:\Documents and Settings\Magdy\Local Settings\Temp"
6- Click your the right button of your mouse and chose ( arrange Icon by Modified )
7- go to the the last folder in the list and open it , you will find the following files inside that folder " CoolFlash_Comms.dll , GotoBL.exe, RUUShop.exe,WMIPL.DIP,WMUPDAT.DIP "
8- Mark the last two files "WMIPL.DIP,WMUPDAT.DIP" and copy them to your Flash Card , now you are ready to flash your mobile using your only flash card.
9- insert the flash card in your Imate PDAL , remove the Battery for 5 seconds and install it again .
10- now Press the two Bottons (Left button " above the green handset button" + Power Botton ) , the mobile will start flashing your mobile , after completion your mobile will restart automatically.
Enjoy
Hint: some other roms of Imate Pdal " Like the Chinese WM6 one " doesn't need the WMIPL.DIP file , it needs only the WMUPDAT.DIP to flash the device.
The above is safe and would not damage your Device but know that " NO DATA WOULD BE RECOVERED UNLESS YOU HAVE A BACKUP DATA FOR IT, THE DEVICE WILL BE AS FACTORY DEFAULT"
Hi Magdy, sorry for my english but i'm italian...
i bought a PDAL with english language (the seller said me that was italian ), so i would like to flash it in italian...how can i do? Is no problem to flashing, but i don't have any rom and I don't know hoe to retrieve it from the web...
In your experience, is possible to copy the italian rom from an italian PDAL (of my friend) to flash my pdal?
Is there a version of WM06 (also in english) avaiable?
thanks for all
1.download Romupdate v1.11? where?????????
Me too, where can i get this romupdater utility? and does it work with PDAL?
Thanks Magdy your procedure working fine
THANKS A LOT
For windows VISTA => C:\Users\YOUR ACOUNT\AppData\Local\Temp\is-KT0IV.tmp
Thanks for your post Magdy ! Works 100%
Greets from Romania !
Sorry for going off topic but my intentions are just to inform you guys that I just finished translating Chinese WM6 rom to English, I also added some packages and tweaked it to perform batter...
I made this rom for myself as I was unable to find and Eng WM6 rom for my PDAL and WM5 was out dated, but I also wanted to share it with you guys so that you can also enjoy using English WM6 on your PDAL devices.
So follow me.... PDAL_WM6_WWE_CellSmith.zip
dear magdi thanx alot working for me...

rom crash and language problem of zinc solution for first time

to all o2 zinc lovers
if you tried to change your device language and faced the crosse language message
or if you lost your rom and your dead device still in eboot page i will save you
both of them hapend to me and i tried and at last success ...
ok do just as i gona tell you
changing language
its too simple
0) plug your zinc via usb activesync v4.5 to desktop...
1) just make a text file in your desktop and name it DeviceSpy and set it attribute to read only
****if you got word in your device you have to use any dos console software and rename it to devicespy.exe with readonly attribute....*****
2) transfer it to \windows dir in your....
3) change the suffix from .txt to .exe by resco explorer or any other file explorer now you have DeviceSpy.exe
check it attribute and sure its readonly...
4) run any zinc upgrade software you wish and got it...just watch the text!you fill happy
notice sometimes some component of wm6 will be not install completely but dont worry .try agine or other version.
************************************************************************************************
************************************************************************************************
if your rom crashed and your devise still in eboot page and waiting for downloading disk image now you gona give it
but a little problem....you need another of any kind ppc that just activesync can recognize it..any wm or hd .....
and also you need ollydbg software.its a debuger.....
steps
0) run ollydbg and load the rom upgrade file in ollydbg
1) plug the healthy ppc to your desktop via usb activesync v4.5
2) make a text file in your desktop and name it DeviceSpy and set it attribte to read only
2) transfer it to \windows dir in healthy ppc...
4) change the suffix from .txt to .exe by resco explorer or any other file explorer now you have DeviceSpy.exe
check it attribute and be sure its readonly...
5) press f9 and zinc upgrader will run...it suppose to installer ignore the differ
6) tap all ok or next buttons and in dialogbox with update button beware
7) most important section : tap update button and eminently click on ollydbg title bar to make it active window
and watch the activesync icone .it quickly will chang and make activesynk disconnect and you have to hear
a notification tone and ppc will restart...
8) quickly press f12 to break ollydbg process then unplug healthy ppc and plug your zinc and wait for notification tone
9) press f9 and enjoy the new rom....
that healthy ppc is still healthy but your dead zinc now is alive...
if you have word or etc you have to use any dos console software and rename it to devicespy.exe with readonly attribute....
Hi Mazi_v. It's really thank you for your great help to change my Zinc from Chinese Rom to English Rom. You're very great!!!
your welcome friend
Hello mazi_v
I am trying to reinstall the ROM file on my bricked PPC.
My PPC does not restart after step (7), it just give an error message that the update cannot continue and the program terminates after I click the "ok" button on the error dialog box.
I have a bricked XDA Zinc and the second PPC I have is a working XDA IIi.
Please advice me if there is a possiblity way I can continue with the ROM update.
Thanks
give a hard reset to mini
it may hlpe
give a hard reset to mini
it may help
dont use olydb
just wen your healthy ppc restarted replace it with zinc quickly.
anyway to fix this problem?? my zinc same
i follow this method step by step,but my zinc is stuck at Reset Hermon...
i tried this method with wm5 n wm6 but still stuck at Reset Hermon
what should i do?
please help me...

[REQ] Clean 6.1 / 6.5.1 rom

Hi,
I was thinking that maybe the good things of WM6.1 and WM6.5.1 could be put in one rom.
Because I like the startbutton and the close button at the bottom from 6.5.1, but I liked the quickmenu from from 6.1.
I also want the quickmenu of task manager back, so you can open it any time without having to go to the startmenu again.
So I was thinking to put the quickmenu from start and task manager together and make it open by pushing the start button at the bottom, just like with normal windows (see pictures).
To make the rom go fast and without having all kinds of programs that you don't even use, I would like to have only these programs/settings cooked:
- Enable internet and bluetooth
- The option to really close a program by pressing the X-button
- Long press end-key
- All standard settings
- An internet browser (don't care which one)
- Office mobile
- Notes
- Pictures and Video's
- Tasks
- Camera
So NO extra keyboard, windows media player (got my own music player), ram cleaner, lock, navigation, etc.
Another very important thing is: I don't want the 6.5 layout as home screen and no touchflow, just the Today screen.
I think that will be possible, because a friend of mine got an old htc and also only the Today screen.
I'm not able to make my own rom, but I'm sure there are a lot of people that know how to do it.
Could anyone make me this rom, please?
http://forum.xda-developers.com/showthread.php?t=583606
this is what u want i think, no touchflow no titanium home.
otherwise theres few clean ROMs available that are pretty good with titanium.
looking at ur attachments... just 2 words..... yuk yuk lol
Thanks for the replay, I'm gonna try the rom.
But how do I instal a .nbh file?
pls search forum for flashing from internal storage.
oh well...
1: copy the ROM in internal storage, rename the file to diamimg.nbh
2: press vol down + back key + press reset with stylus [keep it press untill screen changes to boot loader 3 color screen]
3: press power button to start flash.
4: after completion again soft reset.
5: u can do hard reset now if u like.
u can do MTTY first if u want and then do all the steps from 1 - 4
u can also use custom RUU as well.
u better be HARD SPL'ed or i take no responsibility.
Thanks so much, I'm flashing now...
Is hard reset necessary?
Ehm, nothing happened.
I've still got my old rom...
pls search forum for ur answer, u apparently a newbie and its better to be safe buddy.
1: u should have HARD SPL before flashing custom ROM
2: u sure u renamed file to diamimg in root of internal storage.
3: does it shows successful at the end.
4: try with RUU
atifsh said:
pls search forum for ur answer, u apparently a newbie and its better to be safe buddy.
1: u should have HARD SPL before flashing custom ROM
2: u sure u renamed file to diamimg in root of internal storage.
3: does it shows successful at the end.
4: try with RUU
Click to expand...
Click to collapse
I am indeed a newbie, but...
1: I've installed HARD SPL
2: I renamed it diamimg and if you mean with "in root of internal storage" just in internal storage (not in subfolders) then, yes I did that.
3: It showed successful at the end
4: I'm gonna try with RUU then What exactly is RUU? Or do you mean rename it again?
Thanks for all the information .
RUU is a custom windows flasher that u use to flash using windows.
another idea since u got the success prompt is it possible that by mistake u flashed ur old ROM.

[Q] A Problem During Upgrade JasJar

Hii all,
actually this my first post in the forum and i hope to find the solution to my small prob.
The problem is appearance some words on the jasjar screen like "usb" n "serial"
they doesn't disappear although i 'v done "reset" n "Power+reset+backlight"
They are permanently appear on the screen and make my jasjar as dead ..
----
actually i've open the rom upgrade icon from the mobile directly and i didn't use the pc at all because i didn't know how to upgrade it
----
please if someone know the solution of this prob. tell me >>
n i want to know how to upgrade the rom if i already downloaded it >>
Welcome to forums
have a read on my signature link and check for usb connection
Moving to upgrade section
Please orb or anyone can help >> ):
I want the software of the jasjar which come with the installtion cd ..
I tried to join the jasjar with the pc but there's a problem with the usb ..
Plese help me as my mobile now like dead body
Thanks In Advance ;
Hello,
First instal ActiveSync 4.5 in PC. - if not already installed
Code:
http://www.softwarepatch.com/windows/activesync.html
Then in settings in (ActiveSync) disable (NOT check): "allowed to connect to one of the following port" and "Allow connection to USB".
Perhaps the translation is correct. I use the CZ version. But it's second and third check box.
Now
This works for when the Universal is in Bootloader and Windows Mobile.
1. First download the ROM you want to install.
2. Extract it to a folder (use winar or other extraction software).
3. There will be up to 3 ROMs in the package: ms_.nbf (Extended ROM), nk.nbf (OS ROM), radio_.nbf (Radio ROM)
4. Delete those which you don't want to install. (If you just want to upgrade the radio rom for instance delete ms_.nbf and nk.nbf and leave radio_.nbf.)
5. Download UniversalRUU.zip
6. Extract it and copy into that folder the nbf files you want to install.
7. Enter BootLoader mode by pressing and holding the power button and backlight button whilst performing a reset with the stylus. And plug to PC. Wait few seconds.
8. Doubleclick ROMUpgradeUt.exe and follow the instructions
9. When the upgrade is finished pull out the USB cable from the Universal.
10. You will need to do a soft reset OR hard reset depending on the situation. (note: some say do a soft reset / others a hard reset .. possibly someone with more knowledge could correct me here, but until then it's best to investigate the matter for yourself on the forum.)
11. To do a hard reset (push the two menu buttons ("-") on the keyboard + the reset button at the same time (all of this three). Doing a hard reset will result in you losing all your installed apps and data so ensure you have a backup of everything first.) Everything should be fine from this time. You have to calibrate the screen and do some tutorial...
12. If after doing a hard reset you want your Universal not to install the extras from the Extended ROM wait untilsetup is complete and then do a softreset when the popup window appears (you have 3 seconds before it installs ExtendedROM)
For a long time I have not installed the new ROM. I remember so I proceeded as follows
Greetings
Svobi
Really I don't know how to thank u
Thread closed as problem got solved

Categories

Resources