Hi (siema)
I have a very odd problem with my SPV M650.
4 hardware buttons, (green, red phone, camera button, voice controll) stopped working with no specific reason. The odd thing about it all is that when i press the O/I button twice the camera starts. Furthermore when in camera mode i tap the O/I button twice again the camera makes a picture.
I was hoping a new ROM would help but it didint (i've flashed B&B v5 twice).
Would really appreceate your help.
exact same problem here
I have a little update on that topic.
I've dissasembled my Artemis and checked the copper under the buttons and id seems that the problem is software based... How can i reinstall the software responsible for the nardware buttons??
Related
Hi Everyone,
Just wondering if any has this issue?
Ive got a HTC Branded TyTN and I've installed various ROMs on the phone, included the standard rom. The buttons on the front of the phone seem to stop responding after 5 inputs.
For example, I activate the start menu with the Windows Button. I use the D-Pad to scroll down the list, i press it 4 times, the keys stop responding.
The slide out keyboard works fine.
Whats weird is, if i press the Ok button below the track wheel twice, I can then press the front face buttons 5 more times.
Any suggestions. I've done hardresets, Rom updates, im leaning toward a hardware issue. i'd like your input though.
Thanks
http://forum.xda-developers.com/showthread.php?t=321163
Hi
Whenever I press the power button on my BA, it hard-resets. So I lost everything on WM2003.
Upgrading to WM6 meant that the only thing I lost was the time, but it's still really annoying!
Any help anyone can give here would be great!
Edit: I've used the search tool, and apart from one similar unresolved issue where the green button caused a hard-reset, there doesn't seem to be anything similar on the Forums or wiki.
Perhaps one of your other buttons is stuck in, did you try to clean the BA?
Thanks for the suggestion!
Checked, doesn't seem to be anything stuck; everything responds correctly to being pressed except the power button. So it's still broken
hi i have htc tytn the pro with me is that my mob front button are not working , i mean that the call button the end call button, the ok button and the start button , else all the button like the switch on button on the side the message button on the top , all excapt the front button is working , i am having a lot of pro bcoz of that , please help me
regarding your question
sachindhopade said:
hi i have htc tytn the pro with me is that my mob front button are not working , i mean that the call button the end call button, the ok button and the start button , else all the button like the switch on button on the side the message button on the top , all excapt the front button is working , i am having a lot of pro bcoz of that , please help me
Click to expand...
Click to collapse
Has this been a recent occurence? if so, just so reset and you should be fine. If this doesn't work, you can always hard reset but make sure to back-up your valuable data. Sometimes my phone locks up as well and I just turn it off and it fixes it. The other thing is if you have flashed several roms you may need to reflash your original rom first, then hardspl before flasing custom roms as Zocster, Veyka and others have alluded to in the forums. There is plenty of material on this through the Hermes forum.
If the above issues were not solved by hard reset there is a good chance it is a hardware issue if this is the case it could be resolved by taking the device apart and seeing if there are any loose cables or problems with the buttons not connecting to the main board.
sachindhopade said:
hi i have htc tytn the pro with me is that my mob front button are not working , i mean that the call button the end call button, the ok button and the start button , else all the button like the switch on button on the side the message button on the top , all excapt the front button is working , i am having a lot of pro bcoz of that , please help me
Click to expand...
Click to collapse
It would more than likely be the dpad connector has come loose. You will have to take it apart and reconnect the cable. you may also start seeing white screens if it is not fixed. Here is the dismantling guide, picture 9 is the one that you need to ensure is connected properly. Here is another one that is in english
finally pro solved
hi all there , thanks for all the help . my pro got solved , i just opened and tighten all the screw . all the pro got solved
The keyboard on my TP2 (Verizon) intermittently stops working (no key press registers, however the buttons on the face of the phone still do). After soft reset it works again. This is with different ROMs. I'm thinking, perhaps, there is a loose connection internally. It also has odd crashes, but this might only be a ROM problem as it is much less pronounced with the latest ROM I'm using (Elite team ROM).
Diagnosis? I'm reluctant to send it into Verizon for just this, as its only occasional. Wondering if anyone has experienced the same thing
I'm having this same exact issue. I'm using the latest ROM from HTC. Sometimes when I open the keyboard in an app, like texting or email, the keyboard is genreally non-responsive. When it's in this state, the enter key goes to windows Apps but all other keys failed to work. I also test by pushing the FN to see if the FN light tunrs on.
What's strange with mine is the keyboard will work when it's open like for phone use, but when open with an app like text/email/bing, it doesn't...
Like previous poster, not sure if hardware ro what...
This may not have anything to do with your problem, but..
I have the PTT button on my tilt2. I have a case that wasn't designed to encompass that button, so it gets covered up (I had a find time finding a case that did actually fit!)
I have the PTT button assigned to do nothing, but with it being pressed down, it makes my keyboard non-responsive as well as disabling the arrows keys on my touchscreen. It will however work for a while after restarting my phone, but it always goes back to the same thing.
Sukuiku said:
This may not have anything to do with your problem, but..
I have the PTT button on my tilt2. I have a case that wasn't designed to encompass that button, so it gets covered up (I had a find time finding a case that did actually fit!)
I have the PTT button assigned to do nothing, but with it being pressed down, it makes my keyboard non-responsive as well as disabling the arrows keys on my touchscreen. It will however work for a while after restarting my phone, but it always goes back to the same thing.
Click to expand...
Click to collapse
Thank you very much for posting this. I do have the same exact setup, I have the PTT button unassigned and I too have a cover that covers it. So maybe it's pressing it down causing the problem.
I hope this is it and really appreciate your post...
UPDATE:
Sweet, I just checked things out. removed the cover and it would the keyboard doesn't go non-responsive when I push the PPT button, and works when I don't...
By George, I think you got it!!!!
GREAT!!!!
there is nothing action when i press my camera button.
i press the camera button, and the camera function doesn't work.
but it still has the carema function in the ROM which i cooked in my X1.
how do i fix my camera button ?
THANKS ~!
Did you break the connector off the board or got it disabled through software?
NO~, just cook the Energy rom.
i can't press the camera button to start up the xperia camera.
But i can start up the xperia camera through ".\Start Menu\Programe\Multimedia\xperia camera".
Also, i notice that, when i start up the xperia camera, i still have the "focus" function....,but just missing "shutter" funtion.
HAHA,can you understand what i taliking about?
please help me.~
i think thats a hardware problem, i believe pressing the camera key on energyroms still opens up xperiacam
and since you have no shutter function that shows its a hardware problem
I can fully understand you, I have same problem. Probably its a HW problem, but after flashing camera button sudenly has been worked. Now problem is back and I have to push at button with power. maybe it will be a feature Not a bug
I have the same problem and its not a hardware thing, i got a new phone for diffrent reasons and it worked till i copy my old system over. I dont really care that much since the camera is crap anyway..but it would be nice to know how to fix it..
you can use the app(button hook)
esmail69 said:
you can use the app(button hook)
Click to expand...
Click to collapse
it would be more satisfying to have it back as it should be, but i really dont remember if i messed up the camerabutton setting in the registy or if some additional software is missing from autostart that checked this button..