I have got part00.raw ~part03.raw from my diamond.Can I use NBUtil to rebuild these image into a .nbh? thank u!
The NBUTIL utility creates a table that is used by TCP/IP to convert NetBIOS names to IP addresses. Using the table, TCP/IP can locate Microsoft file and print servers and other servers that use NetBIOS whether they are located on a network or the Internet. See your network administrator for information about the use of NBUTIL and IP addresses for your specific network.
rajas
nbutil
/shrug
Please read my question carefully!
thanks a lot !
Related
Hi there
My IP adress keeps on changing on my Android (Cyanogen 6.1.1) Desire and so I keep on hopping between different IP addresses. The IP adress of the only other system on my network has not changed.
I would prefer not to use a static address but to understand and fix the cause of this. I have a laptop which does'nt hop around so frequently so
I think it must be related to a phone/Android setting but so far i've been unable to find out where this is configured.
My link speed is 54 Mbps so I have a good connection to my wireless router.
How can I fix this ? Perhaps I just need to install an extra application.
Elixir displays the lease in binary for some reason, 10101000110000000 (86400 base 10). 86400 seconds is a lease time of 1 day.
And this is confirmed on the OS itself.
Code:
# getprop dhcp.eth0.leasetime
86400
# dhcpcd --version
dhcpcd 4.0.15
Copyright (c) 2006-2008 Roy Marples
# pgrep -lf dhcpcd
1486 /system/bin/dhcpcd -ABKL -h android_dddddddddddddddd eth0
dhcpdcd options if they are the same on Android : http://roy.marples.name/cgi-bin/man-cgi?dhcpcd
-A, --noarp
Don't request or claim the address by ARP. This also disables
IPv4LL.
-B, --nobackground
Don't run in the background when we acquire a lease. This is
mainly useful for running under the control of another process,
such as a debugger or a network manager.
-K, --nolink
Don't receive link messages for carrier status. You should only
have to use this with buggy device drivers or running dhcpcd
through a network manager.
-L, --noipv4ll
Don't use IPv4LL (aka APIPA, aka Bonjour, aka ZeroConf).
Hi,
I want use my browser to connect on my corporate intranet via VPN connection, but I'm not able to do it.
Someone can help me?
Some information:
I tried 2 way to confgure OpenVPN:
1) I've configured OpenVPN via openvpn-settings apps (using pre-created cert files located on <rootsdcard>/openvpn ).
The .ovpn config files sound like
port yyyy
dev tun
# dev-node ovpn
proto tcp-client
remote xxx1.xxxx.it yyyy
remote xxx2.xxxx.it yyyy
remote xxx3.xxxx.it jjj
remote xxx4.xxxx.it jjj
ping 30
persist-tun
persist-key
tls-client
ca xxx.ca.crt
cert xxx.aaaa.bbbb.crt
key xxx.aaaa.bbbb.key
ns-cert-type server
comp-lzo
pull
verb 5
I connect to VPN with no problems, and I can use for example ssh to connect on my corporate linux server.
2) I've created a VPN from Menu->Settings-> Wireless & network-> VPN settings -> add VPN-> add VPN OpenVPN
and set parameters according with previous .ovpn config file
I connect also to VPN with no problems, and I can use for example ssh to connect on my corporate linux server.
On both cases I'm not able to browse intranet. So I checked the IP address I go out with, pointing to h**p://m.showip.net/, and It display my provider IP, not assigned VPN IP!
It can be that VPN don't tunnel all traffic? Maybe I need to change the default gateway?
I'm confused
My OS is Cyanogenmod 7.1.0.1
My phone is HTC Wildfire (Buzz)
Hi All,
If you are facing issue to add account in KOREAN Mobile then you need to do the following.
GO to RootExplorer---> etc ---> edit the HOSTS file in Text Editor
Now you can see the data in the text files as follows:
127.0.0.0 localhost
74.125.93.113 android.clients.google.com
Modify the data as follows:
127.0.0.0 localhost
#74.125.93.113 android.clients.google.com
You need to add the symbol # to the IP Address in prefix.
Thats it. You can access the Playstore by adding google account.
Be careful while adding this. Do not add any other things in this file. It may cause to lapse your mobile.
Regards,
Yeswanth
Hi all.
I need to deactivate the Bluetooth connection in my Citroën C4. It uses a NAC infotainment system (same as Peugeot) but there is no option in the menu to do it.
I founded in previous infotainment there were some cheats codes (like BTSTARTER;0) to do it, but they don't work in NAC. There we have the hidden menu but it only shows information and is not possible to modify anything there.
Spoiler: Explanation
To access the hidden menu in NAC is necessary to press at least 6 seconds the multimedia button and then enter first the list (for example 1130) and then the code 1122.
Here is the list of available codes
1111 Spy log generation
1122 Master mask
1130 Information about amplifier, battery etc
1133 Information about radio / received / freq
1134 Information on satellites and services
1135 TomTom version
1136 Information about WiFi devices
1137 current user status, temp.
1138 Linux, USB, processor utilization
1139 GPU memory load
1140 connection status WiFi, tethering, Bluetooth, rndis, ipadreesen and macadressen and much more.
1141 Connected USB devices
1142 ATB connection
1143 no information without serial connection
1144 tone becomes quieter
1145 Provider status, SMS status
1146 Download status
But under the NAC there is a Linux system, so for sure it is possible to create a script or something similar that would be read from the USB.
In this thread they found the way to create a file that will be read by the system to perform some actions, so I guess it could be a starting point
Spoiler: Explanation
Here is explained how to create a file to be read by the car:
Crunchy_Nuts said:
So the complete content of the usb file is
Code:
#USB Demo file
[general]
id=9cfd0bf57a94a3beb6c990e9c9c78247a8bc78fd3310aa6f58a247f8dabe3b7f
# Activate engineering mode
# engineering_mode=0 (Absent) engineering_mode=1 (Present)
engineering_mode=1
# Create one spy
# create_spy=0 (don't create spy) create_spy=1 (create spy)
create_spy=1
# Option to automatically sync spies with USB. Currently it exports spies to USB and delete the existing ones on NAND
sync_spies_with_usb=1
Create a file and rename it to ID (without any file extension!) and copy the code above into the file.
Copy the file in the root directory of the usb stick and plug it in to the nac.
After you insert it in the nac, it will copy the spylogs to usb.
And maybe you can do other things with the engineering mode.
Click to expand...
Click to collapse
The id comes from rootfs\usr\bin\sem_dm_server, but I would need help to find my own ID if necessary
I don't know if it would be possible to do it based on some of the previous ideas or somebody has another way to do it. I would really appreciate any ideas.
It is something very important for me, so I would be happy to invite some drinks (or a dinner!) if somebody could help me with it.
Cheers!
Hello,
I am trying to connect my smartphone Xperia 10 III Android 12 Update July 2022 BN 62.1.A.0.617
to Enterprise WIFI using certificates CORPORATE-WIFI-WPA_EAPIEEE8021X_TLS_NULL
with following setting pushed by azure intune :
Scep Cert policy to android:
Subject name format CN={{AAD_Device_ID}}
Subject alternative name User principal name (UPN) = {{AAD_Device_ID}}@domain.com
Certificate validity period 1 Years
Key usage Key encipherment, Digital signature
Key size (bits) 2048
Hash algorithm SHA-2
Root Certificate "YOUR ROOT CERT"
Extended key usage Client Authentication enter what you cert template says
Renewal threshold (%) 20
SCEP Server URLs "NDES URL"
WIFI Settings policy to android:
SSID "SSID"
Connect automatically Disable
Hidden network Disable
EAP type EAP - TLS
Radius server name "All Ise Nodes"
Root cert for server valid "Your Root Cert"
Authentication method Certificates
Certificates "Scep Cert From earlier"
Identity privacy anonymous this seems to be important
Unfortunately, Cisco ISE do not see my Smartphone MAC Addr and phone does not connect.
We investigated a lot of about this connection issue but do not find the root cause.
Re-enrolled my phone to Intune more than once, resync'ed mgmt policies,
reinstalled certificated, ... does not seem to help.
Also removed Norton 360 security just in case of but no change.
Any idea about the root cause or where the issue can be ?
Situation was the same with March 2022 Android 12 update
Thanks for your ideas
Th
If You using private MAC, You may try to disable it for this wifi connection.
Hello,
Thanks for reply. Gave a try with Device MAC or Randomized MAC but not change. Is this what you mean ?
Thanks
TH