Don't want to (auto) rotate! - Touch Pro2, Tilt 2 Windows Mobile General

Each time the keyboard slides in or out the screen rotates.
Usually I slide the keyboard out to work with the device. After working I power off the device and slide the keyboard in.
When working again I slide the keyboard out and turn it on (usually it turns on after sliding automatically)
But, it seems that while the screen was off the device rotated anyhow! This means that it has to rotate again when I turn it on. I don't want this. When the device has to rotate, I will do it manually!
So, does anyone know how to disable all this automatically rotating?

I do not understand what you mean. I followed what you did and whenever i turned the screen back on the rotation was always correct as to whether i had the keyboard in or out.

mcspikesky said:
I do not understand what you mean. I followed what you did and whenever i turned the screen back on the rotation was always correct as to whether i had the keyboard in or out.
Click to expand...
Click to collapse
The problem sometimes is that rotating takes some time. In between the screen stays black. So it looks as if the device does not respond and therefor I press the power button once more. I now learned to perss some button on the keyboard - when the light goes on the device is on, but thinking what to do to rotate.

Related

TF3D launches at startup but have to tap screen to display home screen.

When I boot up after reset or power off, the homescreen displays top task bar, bottom soft keys, and displays "launching TouchFlo3D..." and then... nothing. The screen stays like this until I tap it, and then it displays the home screen. Anybody else seeing this?
Even when just switching it on from a while on standby, I get a black screen.
I press the home or start buttons, and the home screen comes on ...... when it feels like it
I have never got no one to answer a question on here good luck...
PaulusUK said:
Even when just switching it on from a while on standby, I get a black screen.
I press the home or start buttons, and the home screen comes on ...... when it feels like it
Click to expand...
Click to collapse
Does touching the screen make it start?
I know that not turning off TF3D before installing some cabs can make it behave oddly- TF3D restarts, fails to launch at boot, etc...
Mine does the same thing except its just a plain screen until I touch it then it says launching tflo
Might have something to do with locking the device with a PIN/password. Try to disable that and see if many of your problems go away (switching to home screen on coming out of sleep or turning the screen on when in call and taking the phone away from the ear etc).
acrh2 said:
Might have something to do with locking the device with a PIN/password. Try to disable that and see if many of your problems go away (switching to home screen on coming out of sleep or turning the screen on when in call and taking the phone away from the ear etc).
Click to expand...
Click to collapse
It has something to do with the PIN lock code, you're right.. now we just need someone to look into this further who knows how to troubleshoot these issues from the back-end.
Bump for more answers!
-mak
so i've tried checking on/off Today/Item/TF3D, tried Flight Mode, and it still won't work. i'm talking like only 30-50% of the time it does work. and I never had PIN1 enabled!
i'm no programmer but it is conflicting with apps we install because TF3D works perfectly when the phone was fresh or hard-resetted. btw i'm using 6.1 Stock T-mobile

Screen locking application

Very simple and very very light application.
Does exactly what it says on the TIN.
The reason I compiled this application is purely to avoid using power button as I don’t want it to worn out. To turn the screen on or off we have to use power button which might stop working if we use the button too much. This application will cut the use of the power button by 50% at least
Rather than using the power button to turn the screen on and off, tap on this application to turn the screen off. Very small application V1.0
I might release another one when I get feedback from the users.
If you want just exe file then copy it in to your phonewindows->start menu-> program folder
Or use cab file which will install it on the above location for you
Enjoy !!!!
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
+1
That makes a lot of sense!
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
hiya,
much appreciate for your comments. do you mean turning screen off as well as locking the screen..? so that when you touch the screen it won't come back on...?
I'm working on to prepare better version i.e. it would be on the home screen so that no clicking on start menu and then this app.
cheers
Major_Sarcasm said:
Trying to be contructive, the way this application could be more useful (to me) would be if it triggered the standard screen lock at the same time as switching off the screen. This would save me tapping 'start' then 'lock' and then pressing the power button.
Click to expand...
Click to collapse
I think he means that you program should not only turn off the devise, but also lock it with the standard WM lock at the same time. That would be good for me, at least.
EgorLev said:
I think he means that you program should not only turn off the devise, but also lock it with the standard WM lock at the same time. That would be good for me, at least.
Click to expand...
Click to collapse
+1
screen off + lock at same time only pressing Powerbutton.
It work perfectly for me so as it is. I changed the left soft-key so that it will start "turn off the light.exe" .When the screen is off S2U2 will lock the screen. So I can turn off and lock the screen with only one click.
To change the soft key do this:
with a registry editor go to HKLM/Software/HTC/manila/ . in HomeLSKPath (left softkey) or HomeRSKPath (right softkey) write the address to "turn off the light.exe". HomeLSKText and HomeRSKText are the text for the softkeys.
That´s it!
update for touch diamond
hi everyone,
massive thanks to all those who provided replies. I have tried on my blackstone (Touch HD) and it does seems to turn off the screen plus all keys as well.
I can confirm that it doesnt lock all the keys i.e. doesnt lock the device on touch diamond model. I'll modify the program and upload the newer version with the feature of locking the keys plus turning off the screen.
once agian special thanks to everyone.
Certainly reading the comments above, people seemed to understand what I was getting at. With the screen off, the buttons on a HD will indeed be non-responsive, however if an event (SMS or similar) woke the screen, the device would be in an unlocked state. What I would be interested in is a program that turned off the screen and invoked the standard WM lock program (gwes.exe?).
Hope that makes sense.
i like this application but i think the icon is really ugly..
Hi,
is there a possibility to do a screen unlock application which can be activated by voice commander? the situation is this...
I used voice commander to launch google maps while my hand is busy when the screen is lock. however, i will need a program which can be initiated by the voice commander to unlock the screen so that i can navigate the maps. Right now i will have to unlock the screen the normal way which i find voice commander redundant since i'll have to use my finger during lunching anyway.
Can you help me on this? Many thanks in advance. =)
Major_Sarcasm said:
Certainly reading the comments above, people seemed to understand what I was getting at. With the screen off, the buttons on a HD will indeed be non-responsive, however if an event (SMS or similar) woke the screen, the device would be in an unlocked state. What I would be interested in is a program that turned off the screen and invoked the standard WM lock program (gwes.exe?).
Hope that makes sense.
Click to expand...
Click to collapse
Here is the app that has the feature which you prefer:
LockDevice => http://forum.xda-developers.com/showthread.php?t=542482
Thanks for the link!
Been using this app so i dont have to fumble with the power button to turn the screen off. Seems this app only turns off the screen and doesnt actualy put the phone in sleep. I would like an app like this that acts as the power button does. So when i put the phone to sleep with the icon, i cant accidently slide the keyboard out a touch and have the phone wake up.
The whole deal has to do with tilt 2's keyboard sensor and magnet cases. With this app, the keyboard sensor still activates when sliding into a magnet flap case, while having slie to wake disabled
carhigh said:
Been using this app so i dont have to fumble with the power button to turn the screen off. Seems this app only turns off the screen and doesnt actualy put the phone in sleep. I would like an app like this that acts as the power button does. So when i put the phone to sleep with the icon, i cant accidently slide the keyboard out a touch and have the phone wake up.
The whole deal has to do with tilt 2's keyboard sensor and magnet cases. With this app, the keyboard sensor still activates when sliding into a magnet flap case, while having slie to wake disabled
Click to expand...
Click to collapse
Hiya,
I'm working on the program so that you can have configuration option to simulate power button to put phone in sleep mode or jus to turn the screen off. This utility was just for people who want to save power whilst listening to the music, etc.
Please keep any ideas/suggestion coming. Much appreciated guys.
Watch the space guys....
That is great inítiative. I use the screen off function actually for the purpose to save power when navigation. screen off when there is a long straíght way to drive.
Put device to sleep mode will cause gps signal lost, which is not so nice.
I can image that there will be a lot of person who wnat to have different adds-on on this small application, it might be a solution to provide command argument.
Thank you.
I will try to see whether this one works for my purpose. Actually in my situation, I even don't want any key be locked as these keys are mapped for navigation.
How about screen toggle thus it is possible to map this application to a key?
awesome, i mapped the exe to a hardware key next to standby. now i can easily save power while wardr listening to music. ^_^
it combines very well with s2u2 locking function too.
big thanks!
tom_hungston said:
Very simple and very very light application.
Does exactly what it says on the TIN.
The reason I compiled this application is purely to avoid using power button as I don’t want it to worn out. To turn the screen on or off we have to use power button which might stop working if we use the button too much. This application will cut the use of the power button by 50% at least
Rather than using the power button to turn the screen on and off, tap on this application to turn the screen off. Very small application V1.0
I might release another one when I get feedback from the users.
If you want just exe file then copy it in to your phonewindows->start menu-> program folder
Or use cab file which will install it on the above location for you
Enjoy !!!!
Click to expand...
Click to collapse
Tom, may be it was to late to find your toggle light off switch, but it was very important for me to find it, thank you man, you solved a terrible issue for me, which is that programs stop updating (eg: twitter) when the device is in standby mode.
I heard that you can release another one, so my feedback is:
it takes about 2 seconds to turn off the light, isn't there any faster??? ))
This application is great. Combined with the S2U2 and HD Tweak i don't even have to use the power button at all. Device locked by S2U2 as soon as i turn off the light, waking up device by pulling out the stylus and rebooting with the help of HD Soft reset. Thanks
P.S. You should really add a decent icon, even though people can change it if they want to.

How do I disable the power button when keyboard is out?

I would like to disable the power button from turning the screen off when the keyboard is open. The reason is because I frequently turn off the screen with my left pointer finger when typing on the full keyboard.
Can somebody let me know how to do this please?
Thanks.
Can anybody point me in the right direction? Can't seem to find anything in the registry. Anybody??
Thanks.
On my TILT 2, with the keyboard out I CAN'T turn the screen off. Is stays on all the time. More than that I can't even turn off the device itself, gotta slide it back in first.
slimslim said:
On my TILT 2, with the keyboard out I CAN'T turn the screen off. Is stays on all the time. More than that I can't even turn off the device itself, gotta slide it back in first.
Click to expand...
Click to collapse
Not on mine. Pushing the power button turns off the screen.
There was already a thread about your problem.
But here is your solution.
Thank you very much. Sorry that I didnt find that myself.

I want my display off when my screen is tilted open

I used to keep my Kaiser tilted open on my desk next to my computer monitor at work with the display off. Seems you can't do this with the Rhodium. Any cabs out there that will allow me to turn off the screen with the slide open?
You mean the phone being in sleep mode?
I just slid mine out and tilted it and pushed the power button to shut the display and it did.
It turns off when it is not plugged in, but I have my Tilt plugged in at work, and tilted up so I can see it, ad it will not turn off, only dim and lock.
EVOIXGSR said:
It turns off when it is not plugged in, but I have my Tilt plugged in at work, and tilted up so I can see it, ad it will not turn off, only dim and lock.
Click to expand...
Click to collapse
Go to your power settings and adjust settings there
I did, adn nothing happens. When on external Power: "Dim display after 5 mins" "Turn off power after 10 mins"
EVOIXGSR said:
I did, adn nothing happens. When on external Power: "Dim display after 5 mins" "Turn off power after 10 mins"
Click to expand...
Click to collapse
Might be silly but make sure you click "ok" on top right. Try soft reset maybe?
I have not had this particular issue on my rhodium but when i was using my tp1 i sometimes had to check the boxes, click ok, then go in and uncheck the boxes, click ok, then go in again and recheck them and hit ok again or the settings wouldn't stick, give that a try and see if it'll work. If you have any other backlight control software chances are it overrides the built in power management also.
To disable keyboard opening from powering on/waking phone
Add this key to your registry under:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"SlideWakeup"=dword:0
Be sure to soft reset after making the edit.
Works on my AT&T Tilt 2 like a charm
~J
PS: this also allows me to slide the keyboard, then power on the TP2 and/or with on then slide open and power off either way

[Q] Screen wont turn on after it turns off. ATT Tilt 2

Everytime I boot my phone up, it works fine up until when the screen goes into sleep mode. Once it goes into sleep mode I cannot turn the screen back on, it stays black. The keyboard, end and answer key lights show up when I press the power button but the screen just stays black no matter what button I press.
I end up having to either take the battery out or using the stick to press the reset button on the side in order to get the phone to where I can see the screen again. I have adjusted the settings to where the screen doesnt go into sleep mode and the screen just stays on but that drains my battery. I want to be able to have my screen go off so I can save power but if it goes off it wont come on again until I reboot.
I have done a hard reset. This problem started happening to me when I started using the Energy Rom but I've even flashed different Roms and the problem still exist.
Somebody please tell me what's wrong! I need help! This is a big annoying problem to have. Thanks.
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
sh4d0w86 said:
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
Click to expand...
Click to collapse
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
themasterhook2000 said:
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
Click to expand...
Click to collapse
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
sh4d0w86 said:
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
Click to expand...
Click to collapse
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
themasterhook2000 said:
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
Click to expand...
Click to collapse
: / sorry. i am unsure.
maybe you have a lose connection?
sh4d0w86.
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Same problem
themasterhook2000 said:
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Click to expand...
Click to collapse
My phone also dos not come back on, when I put it in out the sreen with the power button on top, or when the phone goes to sleep. Nothing can put it back on(opening te keyboard, pulling out the stylis, presing the answer-, windows-, back- and end button). I and up using a music players too keep the phone busy what's makes it operational. Cant really remember when this started happening exactly. My phone is at the moment loaded with a standard ROM. I used too have a custom ROM.
My TP2 does this too, although I only encounter the problem sometimes when someone calls. I answer and put the phone next to my ear, the screen goes black as it should and the phone just dies. I can't hear what the other person is saying and the screen wont turn on anymore. I have to take out the battery to reboot.
set light sensor to manual in settings. You have some bad or fragmented code causing the problem. Pretty common actually, many different reasons, but usually either a bad light or proximity sensor or software issue. Setting the sensor to manual should do it, if not, hard reset and allow the phone to fully set up before touching it, to allow full customization process to complete. Search my posts on SOD (sleep of death) for more information.
Funny this was brought up. Now im worried I just dropped 250.00 and have a new one coming.
Mine started with the ear piece quit working. couldnt hear anything except on speaker.
Anyway I started having the screen issue over a month ago, only way to get it back was soft reset with the stylus. Also when the screen was lit, I couldn't hit the power button to turn the screen off. At times the screen would be on 24/7 and I just dealt with it. The times when it decieded to go to sleep was when I needed the soft reset. Well long story short I forgot my charger one day at work and the battery died. after pressing the power button for hours with no response, moving the screen in all diffrent directions as I pressed the button.It came on once after hrs of messing with it. Well today it died again and I am fed up with it so out came the tools. Once I opened it up I noticed the ribbon that feeds the screen from the mother board was worn and torn. the ribbon slides everytime the keyboard is slid out and it rubs on both sides of the phone. I thought maybe mine was just a fluke and was installed wrong considering the phone being 10 months old but now I read this and see maybe its a common problem. The cheapest I could find the Ribbon was 56.00 so I didnt want to chance it not being the issue.

Categories

Resources